Pony Luxury Coating Slikarstvo nakup rabljenega (2.760)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 3.500 mm, skupna dolžina: 7.050 mm, skupna širina: 4.100 mm, volumenski pretok: 36.000 m³/h, temperatura: 80 °C, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), Oprema: kabina, osvetlitev, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively, also available as a separate paint booth with a dedicated dryer). Here, we rely on full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating panels or wall extraction at a position of your choice. If you want to further increase the efficiency of the system beyond heat recovery and stepless control via frequency converter, we are pleased to offer you a sectional control system. This allows you, during repair painting or partial loading of the booth (for example, if you only wish to paint add-on parts), to activate exclusively the section in which the components are located. This way, you can operate with a lower air volume without sacrificing quality, thus saving energy and ultimately real money. Please contact us—we will be happy to demonstrate these options to you. Hsdpfx Aljxa H Ewofsfg Do you have any questions or suggestions? We are gladly at your service.

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. Hfjdpfx Aljwzmcbofjg OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.600 mm, skupna dolžina: 11.200 mm, skupna širina: 5.100 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, notranja višina: 4.970 mm, notranja dolžina: 11.000 mm, temperatura: 80 °C, notranja širina: 5.000 mm, potreba po zraku: 52.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 250 kW (339,91 KM), moč: 45 kW (61,18 KM), gorivo: utekočinjeni naftni plin (LPG), vhodna frekvenca: 50 Hz, poraba energije: 45 kWh, debelina izolacije: 50 mm, nazivna moč: 250 kW (339,91 KM), najv. debelina jeklene pločevine: 2 mm, Oprema: osvetlitev, * Air Treatment Unit: The air treatment unit is a circulation system that supplies the cabin with filtered fresh air and extracts used air during the painting process. It heats the air to 60°C, mixes the exhausted air with 10% fresh air via an automatic multi-damper system, and reheats the air before recirculating it into the cabin. The air is heated by a burner and a heat exchanger, both made of high-grade 304 stainless steel and housed in the fresh air unit. During painting, the air is filtered twice (by pre-filters and ceiling filters) before entering the cabin. The polluted air is also filtered twice (inlet and exhaust filters) before leaving the exhaust unit. Air treatment units are insulated like the sidewalls to minimize heat loss and are protected against possible vibration and noise by rubber seals on the covers. The exhaust air is regulated by a damper in the exhaust duct, contributing to the control of the cabin’s internal pressure. *OPERATING PRINCIPLES OF THE CABIN:* The processes in the cabin are controlled via a control panel, which manages the following steps: *PAINTING PROCESS:* During painting, 100% fresh air is drawn in from outside and passed through the front filters before reaching the plenum at ambient temperature. The air is then discharged via the exhaust unit. Floor filters (paint stop) capture paint particles, and the air passes through the final exhaust filters before being released. Hedpfewzl Hxjx Alfsfg *FLASH-OFF PROCESS:* After painting, the cabin runs for another 15 minutes to expel residual solvents and thinners. Fresh air from outside circulates in the cabin during this phase. *DRYING PROCESS* In this phase, 80% of the air flowing through the cabin is heated to 60°C and delivered into the cabin via a plenum. Since 20% of the solvent is released during drying, the solvent is expelled with this air. Industrial paints are typically dried at 60°C; however, the cabin temperature can be adjusted via the control panel as needed. *COOLING PROCESS:* After the 30-minute drying phase, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates into the cabin, and afterwards, the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of the machines and devices integrated into the cabin. The control panel is made of durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Switch Panels: • The control panel contains essential components such as contact breakers, fuses, indicator lights, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • The electrical wiring is designed to allow cabin relocation, if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperatura: 230 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), notranja dolžina: 2.500 mm, notranja širina: 1.505 mm, ✈️ Plus shipping costs – shipping available on request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Efficiency Class A+++✅✅✅ ✅ Plug & Play system – delivered fully assembled, ready for immediate use! ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chances of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder coating oven with electric heating – ✔️ Internal dimensions: 2500mm (L) x 1505mm (W) x 1800mm (H) ✔️ Electric heating power: 30 kW/h ✔️ Blower: 3000 m³/h 80mm SS ✔️ Circulation fan output: 1.5 [kW/h] ✔️ Total 35 kW/h ±10% ✔️ Digital temperature control, steplessly adjustable up to 220°C ✔️ Sandwich panels: Inside 1.5mm galvanized steel, outside 1.5mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function adjustable ✔️ Acoustic signal at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150mm (150mm stone wool) 🔥 PEF-2.5 Curing Oven – your versatile industrial oven for drying and curing processes! 🔥 Whether for powder coating, wet painting, plastics processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying operations up to 230°C! 🌡️ _____ 🚚 Maximum flexibility in loading • Compatible with overhead rail systems • Optional insert shelving system for small series _____ ⚙️ Intelligent control – tailored to your needs ✅ PID control (optional) for precise temperature management ✅ Touchscreen control panel & smartphone operation 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes up to 24 hours ⏲️ ✅ Automatic shut-off after process completion _____ ♨️ Ramp heating mode (optional) Control temperature ramp and hold times precisely, e.g.: • Reach target temperature in a defined time • Hold at desired temperature • Controlled cooldown to target temperature • Automatic notifications for process events Hjdpfxjwfgbrs Alfjfg _____ 🛡️ Safety first 🟢 Safety sensor for overheat prevention 🟢 Automatic shutdown in case of malfunction 🟢 Audible alarms in case of errors 🟢 Solvent and fume extraction via automatic ventilation _____ ⚡ Customized energy & heating systems 🔥 Also available with extension up to 400°C for high-temperature processes (optional) _____ 🧠 No need for repeated settings! The oven stores your process parameters – batch by batch. This saves you time and prevents errors. _____ 📢 And best of all: If you have specific requirements – we also build custom ovens to your specifications! Contact our expert team for personal consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Hsdewfhu Hepfx Alfsfg Are you looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – all with minimal effort! ✨UNBEATABLE SPECIAL OFFER – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it’s too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled and ready to use! ✅ 100% European manufacturing – No Chinese goods, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! ✅ All spare parts included – Long-term use with no hidden additional costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chances of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505 mm ✔️ HEIGHT: 1,800 mm (from air duct) ✔️ INTERNAL LENGTH: 2,500 mm ✔️ Dimensions of the thermoblock unit are 785x1800x2210 mm. The heating power is 30 kW/h. A recirculation fan is 1.5 kW/h – 1 unit; an exhaust fan is 0.54 kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are made to the specified floor panel dimensions. ✔️ Specially designed air duct ensures homogeneous air distribution within the curing oven. ✔️ Electrical switchgear components are Siemens and Schneider. This curing oven does not have a PLC system. PLC is optionally available. ✔️ Curing temperature, curing time, and heating unit function are adjustable. At the end of the program, an audible and visual signal sounds from the buzzer. ✔️ Additionally, a product transport trolley with cast wheels is included inside the oven. ⭐ Powder booth ✔️DIMENSIONS: 800x1930x2200 mm (dimensions including fan) ✔️ Teflon filter: 4 pcs ➢ Filter suction fan: 4 kW x 1 unit (6,000 m³/h – 200 mmSS) ✔️ 36 W LED lighting x 1 unit ✔️ Lowest drawer x 1 unit ✔️ Control panel for air intake and pressure blasting ✔️ DELTA frequency inverter ✔️ Heavy-duty rollers under the spray booth ✔️ An additional filter is located at the fan outlet. ⭐ Powder coating gun E-Coat+3 Master with multicolor (vibration table) Contact us now – Prepare your company for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️ We have CE certificates for all our machines and ATEX certificates for the necessary machines. ☀️

Stanje: novo, Leto izdelave: 2025, skupna višina: 982 mm, skupna dolžina: 4.000 mm, skupna širina: 1.100 mm, volumenski pretok: 18.000 m³/h, trajanje garancije: 12 meseci, Suction wall with 18,000 m³/h MAX power consumption 5 kW/h Hjdswz Ic Nopfx Alfefg Electric motor 4 kW Air unit 18,000 m³/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Stanje: novo, Powder Coating Systems For years, powder coating has been evolving continuously as an alternative to wet painting, and especially recently, it has gained significant importance due to its lower environmental impact, as it does not generate solvent or paint sludge emissions. In particular, the ability to recover unused powder enables especially high efficiency levels. For users, powder coating has the advantage of providing an extremely durable and corrosion-resistant finish that is considerably more impact-resistant than conventional paint. Additionally, reworking, such as grinding or drilling coated parts, poses no problem and will not cause the coating to flake off. Pony Luxury Coating powder coating systems therefore deliver tangible benefits: they are efficient, environmentally friendly, and—true to our tradition—exceptionally flexible. We achieve this through a range of different plant types. Manual Powder Coating Systems Manual powder coating installations are the ideal solution for complex and challenging workpieces. With skilled personnel, there is continuous adaptation to changing circumstances and product sizes. Flexibility is paramount, and these systems also offer a cost-effective entry into the world of powder coating. Large-Capacity Powder Spray Booths Hsdpfx Ajxa Hzxslfofg No matter how large or demanding your workpieces are—our systems are even larger! Due to the high loads involved in commercial and utility vehicle applications, powder coating has established itself as the ideal solution here. To accommodate ever-larger components, we offer large-capacity powder coating booths that, combined with manual application, place no limits on workpiece size and, when used in conjunction with conveyor systems, can handle any dimension. Automatic Powder Coating Systems If your operation requires high throughput and speed, an automated powder coating installation is your ideal solution. Coupled with conveyor systems, light curtains enable precise part detection and, therefore, exact dosing of powder for optimal efficiency. Of course, we also offer systems equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers The perfect finishing touch for any powder coating process: the curing oven. Our ovens, built to the highest insulation standard, extend our system-wide efficiency to this crucial stage. Detailed temperature control also allows use as a flash-off dryer to dry components after pretreatment. Temperatures of up to 250°C are possible, making these ovens suitable for use as tempering ovens—for example, with hot-dip galvanized parts. Of course, classic use as a powder curing oven is straightforward; optimal air distribution and a visualized control panel prevent overbaking and even enable simultaneous curing of different color shades. Questions or suggestions? We are always happy to help!

Stanje: novo, Oprema: kabina, Stationary small parts spray booth Dixi █████ Coating small parts perfectly & evenly. The extraction system ensures perfect results in the smallest spaces. Optionally equipped with a turntable or wheel mount, as well as a compact yet powerful extraction unit, it is ideally suited for processing small workpieces and rims. The side walls effectively limit overspray distribution, allowing work to be carried out in confined spaces without contaminating adjacent areas. Additionally, integrated lighting can be installed. Thanks to its low weight and minimal connection requirements, it can be relocated to a new site in a very short time, maintaining your operational flexibility at all times. The system is delivered fully pre-assembled and Your benefits Thanks to its compact design, flexible dimensions and adaptable accessories, a wide range of applications is possible without any issues. The sophisticated modular system requires little space, making it suitable for use in all types of rooms. The various filter media and filter stages ensure highly efficient operation and make filter changes a matter of just a few minutes. Application and safety Hfjdpfx Alsxa Hx Rsfsg Processing both water-based and solvent-based coatings is guaranteed thanks to the use of ATEX-approved explosion-proof motors. Optionally also suitable for glue spraying. The large filter surface ensures uniform extraction.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.400 mm, skupna višina: 2.210 mm, skupna širina: 1.505 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, temperatura: 250 °C, ogrevalna zmogljivost: 30 kW (40,79 KM), notranja dolžina: 2.500 mm, Oprema: nujno zaustavitev, ✈️ Additional shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy efficiency class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready for immediate use! ✳️ Preserve your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty, or leasing programs. Hsdswdtfuepfx Alfjfg ☘️ Environmentally friendly☘️⚡️Green Energy⚡️☘️ PEF-2.5 POWDER CURING OVEN ELECTRIC INTERNAL WIDTH: 1,505 mm HEIGHT: 1,800 mm (measured from air duct) INTERNAL LENGTH: 2,500 mm ➢ Dimensions of the thermoblock unit: 785x1800x2210 mm, heating power 30 kW/h, one recirculation fan: 1.5 kW/h, one exhaust fan: 0.54 kW/h. ➢ Double-leaf door with thermal insulation and silicone seal. ➢ Guide rails for trolleys are manufactured as per the measurements stated on the base panels. ➢ Specially designed air duct for homogeneous air distribution inside the curing oven. ➢ Electrical control panel components from Siemens and Schneider. This curing oven does not come with a PLC system; PLC is available as an optional extra. ➢ Curing temperature, curing time, and heating unit functions are adjustable. At the end of the cycle, an audible and visual signal is emitted by the buzzer. ➢ Additionally, there is a product transport trolley with castor wheels inside the oven. 2. PKF-4 POWDER COATING BOOTH ➢ DIMENSIONS: 800x1930x2200 mm (including fan) ➢ Teflon filters: 4 pcs. ➢ Filter extraction fans: 4 kW x 1 unit (6,000 m³/h – 200 mm SS) ➢ 36 W LED lighting x 1 unit ➢ Bottom drawer x 1 unit ➢ Control panel for regulation of air intake and pressure blasting ➢ DELTA frequency converter ➢ Heavy-duty castors beneath the spray booth ➢ Additional filter at the fan outlet ♨️ Ramp-Heating Mode (optional) Precisely control temperature profile and dwell times, e.g.: • Reach target temperature within defined time • Maintain set temperature for desired time • Controlled cooling down to target temperature • Automatic notifications on process events _____ 🛡️ Safety First 🟢 Safety sensors for overheating prevention 🟢 Automatic shutdown in case of malfunction 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and smoke extraction via automatic ventilation _____ ⚡ Tailored Energy & Heating System 🔥 Also available with upgrade up to 400 °C for high-temperature processes (optional) _____ 🧠 No repeated settings needed! The oven saves your process parameters – batch by batch. Save time and avoid errors. _____ 📢 And best of all: If you have specific requirements – we also build bespoke special ovens according to your specifications! Contact our expert team for personal advice! _____ ☀️ 2 YEARS WARRANTY ☀️ Request more information now

Stanje: skoraj kot novo (rabljeno), RR120 je visoko zmogljiv sistem za tiskanje, premazovanje, pregledovanje in sušenje rol. Modularna zasnova omogoča prilagodljivost glede na specifične aplikacije in potrebe. Sistem za rokovanje z materialom iz koluta na kolut Hfodoya Hvqopfx Alfog 7 dozirnih kanalov (tandemske črpalke) Bio-Jet, Front Line in Air Jet dozirne tehnologije Tiskanje do 7 vrstic hkrati Avtomatizirano sledenje doziranju za natančno namestitev linij Več aplikacij na enem sistemu Nastavljiva napetost za obdelavo podloženih/nepodloženih membran Enostavna nastavitev, uporaba in vzdrževanje Shranjevanje podatkov za podporo več aplikacijam Številne možnosti sistema je mogoče nadgraditi po nakupu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Hedpfx Aet Dx U Sslfofg Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: rabljeno, Panning stroj, stroj za prevleko, za praline in dražeje, rabljena oprema Proizvajalec: Walter Brucks Tip: I Skupne dimenzije: 1200 x 1380 x 1800 mm Teža: 280 kg Električni podatki: 400 V, 3 A Velikost bobna: 1200 mm Ø x 650 mm Hfedpfeypvhzsx Alfjg Odprtina bobna: 740 mm Ø Kapaciteta / mešanje: približno 150 kg

Stanje: dober (rabljeno),

Leto izdelave: 2014, stanje: rabljeno, Rabljena linija za prašno lakiranje. Zaustavljena leta 2024. - Mešalnik za posode Mixaco, tip CM1000-MT, s 4 x inox rezervoar 800 litrov, letnik 2014 - Ekstruder Coperion, ZSK 43 MV, letnik 2014 - SBS hladilni transporter, širina 800 mm x dolžina 5000 mm - Mlin Hosokawa Alpine, tip ACM40 EC CL, letnik 2014 - Dozirna naprava Gericke, tip GL D 7, letnik 2014 - Naprava za podajanje Hosokawa, letnik 2014 - Tlačni filter Hosokawa Alpine, letnik 2014 - Inox ciklon, premer 500 mm - 2x rotirno sito AZO, tip E 240 - Žepni filter s 45 kW električnim motorjem - Hladilna enota Climaveneta, tip NX/K 0914P Hfodpfxovxrm Uo Alfsg - Hladilna enota Climaveneta, tip NX/K 0552P

Stanje: rabljeno,

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 Hedpfx Aljd Nd T Uefsfg BALDWIN: Type: FK-1-500 // Serial No.: 151166 // Part No.: 150.01.0001

Stanje: rabljeno, prevoženi kilometri: 282.243 km, moč: 368 kW (500,34 KM), prva registracija: 10/2022, vrsta goriva: dizel, skupna masa: 18.000 kg, naslednji pregled (TÜV): 05/2028, barva: modra, vrsta prenosa: samodejen, Leto izdelave: 2022, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Internal vehicle no.: 153446 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (postcode 49076), Prof.-Porsche-Str. 7 * Tel.: Interior * Automatic climate control * Air-suspended co-driver’s seat Comfort and Environment * Auxiliary heater * Cruise control Additional Features * Adaptive cruise control + ZF Intarder * Armrest for co-driver’s seat * Replacement engine at 282,200 km * Automatic headlight function and rain sensor * DAB radio * Electric cab tilt mechanism * Colour: blue lightning * Grille colour: light grey * Luxury Pack * Hire purchase / financing or leasing via F-Trucks Finance GmbH possible. We are happy to provide you with a quote. * Wheelbase 3,750 mm (600 L + 750 L standard tank) * Stand-alone air-conditioning system with AGM battery 210Ah Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all transporters: Optional 12 or 24 months Mercedes-Benz used vehicle warranty available upon request. Hfodpfey Sq Rdsx Alfjg * We are happy to take back your current vehicle, offset it against the new vehicle, or pay you the purchase amount. * Leasing/financing available through Mercedes-Benz Bank. We are happy to provide you with a quotation. * No liability for printing & typing errors * Subject to change and prior sale ----.

Stanje: rabljeno, prevoženi kilometri: 282.243 km, moč: 368 kW (500,34 KM), prva registracija: 10/2022, vrsta goriva: dizel, skupna masa: 18.000 kg, naslednji pregled (TÜV): 05/2028, barva: modra, vrsta prenosa: samodejen, Leto izdelave: 2022, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Internal vehicle number: 153446 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP 49076), Prof.-Porsche-Str. 7 * Tel.: Hfodpfxey Sq N Tj Alfeg Interior * Automatic climate control * Air-sprung passenger seat Comfort and Environment * Auxiliary heater * Cruise control Other features * Adaptive cruise control + ZF Intarder * Armrest for passenger seat * Replacement engine installed at 282,200 km * Automatic headlights and rain sensor * DAB radio * Electric cab tilting system * Color: Blue Lightning * Grille color: light grey * Luxury pack * Hire purchase / financing or leasing possible via F-Trucks Finance GmbH. We would be pleased to prepare an offer for you. * Wheelbase: 3750 mm (600 L + 750 L standard tanks) * Stationary air conditioning system with AGM battery 210 Ah Other information: * Nationwide delivery for €299 net plus VAT (€355.81 including VAT) * For all vans: 12- or 24-month Mercedes-Benz used vehicle warranty available on request. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase amount. * Leasing / financing through Mercedes-Benz Bank. We would be pleased to provide you with an offer. * No liability for printing or typographical errors * Subject to prior sale and errors. ----.

Stanje: rabljeno, Leto izdelave: 1995, delovna širina: 1.300 mm, priključek za stisnjen zrak: 7 letvica, Machine type: Coating and laminating line for coating, lacquering, and laminating from roll to roll with solvent-free adhesives. Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of manufacture: 1995 Web width: 650 to 1,310 mm Laminating width: up to 1,300 mm Speed: Mechanical up to 300 m/min Materials for coating: - BOPP: 15 – 80 µm - PETP: 12 – 30 µm - LDPE, LLDPE: 40 – 200 µm - OPA: 12 – 18 µm - NYLON CAST: 50 – 80 µm - ALUMINIUM: 15 – 40 µm - PP CAST: 60 – 150 µm - SATIN PAPER: 40 – 300 g/m² Materials for lamination: - BOPP: 12 – 80 µm - PETP: 12 – 30 µm - LDPE, LLDPE: 20 – 200 µm - OPA: 12 – 18 µm - NYLON CAST: 20 – 80 µm - ALUMINIUM: 7 – 40 µm - PP CAST: 25 – 150 µm - EVOH: 12 – 20 µm - CAST MATERIALS: 25 – 200 µm - SATIN PAPER: 40 – 300 g/m² Unwinder A: - Model: 850 - Roll change: Automatic up to 300 µm - Roll diameter: 90 to 850 mm - Roll weight: Up to 900 kg - Core diameter: 70/76/150/152 mm - Web tension: 2.5 to 55 kg Hjdpfxoy Hgwps Alfsfg - Coating thickness: Up to 300 µm - Corona pretreatment Unwinder B: - Model: 850 - Roll change: Automatic up to 300 µm - Roll diameter: 90 to 850 mm - Roll weight: Up to 900 kg - Core diameter: 70/76/150/152 mm - Web tension: 2.5 to 55 kg - Coating thickness: Up to 300 µm - Corona pretreatment Coating and laminating unit: For solvent-free adhesives. Coating section with 4 rollers, 2 of which are heatable. Laminating section with 3 rollers. Rewinder: - Model: 850 - Roll change: Automatic up to 300 µm - Roll diameter: 170 to 850 mm - Roll weight: Up to 900 kg - Core diameter: 150/152 mm - Web tension: 6 to 55 kg - Coating thickness: Up to 500 µm Mixing and dosing unit: - Manufacturer: DOPAG, Switzerland - Model: Variomix Heating elements. 1 trolley for mounting transfer rollers for adhesives. Electrical connection: - 220 / 3 x 400 V, 50 Hz - Installed power: 180 kW - Rated current max. 90 amps - Average consumption: 35 kW Compressed air connection: - Inlet pressure: 7 and 10 bar - Max. consumption: 400 l/min Water consumption: 2000 l/hour Various spare parts. Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used (pre-owned). Availability: Immediately.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: nepreverjeno, Dober dan, na prodaj je podje Sputter za steklo proizvajalca Beijing Instruments Factory oziroma JDS. Gre za model JDS800. Hfjdpfsy D Uphex Alfog Stroj uporablja postopek fizikalnega naparevanja (PVD) in nanaša v horizontalni legi na substrat. Naprava je dolga približno 5 m in široka približno 1 m. Velikost substrata je približno 400 x 420 mm. Natančne mere so razvidne iz fotografij. Naprava je dopolnjena z različnimi napajalniki, predčrpalkami in turbomolekularno črpalko. Na voljo so tehnične risbe in več map s tehničnimi informacijami. Naprava je bila iz omrežja izključena v delujočem stanju. Demontaža in odvoz naprave je v pristojnosti kupca.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Detailed specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove design; 0.5 mm steel sheet with mineral wool core - Chamber: Panels 100 mm thick, insulated with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating capacity: 200,000 kcal/h, 1 set in total - Roof: Panels 100 mm thick, insulated with mineral wool - Control system: Heating control, timer setting, fault indicator, emergency stop switch, hour meter, temperature limit controller, total runtime display - Total power: 6 kW - Overhead transport system: 4 rails; maximum load 400 kg per rail We manufacture ovens in any dimensions. We provide complete systems with transport beams, spray walls, and powder coating guns – see visualisations in the photos. Hodjxna U Uspfx Alfefg

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Število grelnih elementov: 4 Moč (na grelec): pribl. 10 kW (230 V/400 V) Maks. temperatura: 700 °C Maks. temperatura v procesu: 600 °C Termoelement: tip K Regulacija temperature: krmiljenje s PLC programsko opremo Tiristorski regulator: AEG Thyro 1A-230-60H Hlajenje (komora): Poraba 2: (4,0…8,5) m3×h-1 Hfodpfx Aljy Htgwjfeg Vstopna temperatura: (15…18) °C Izhodna temperatura: (20…28) °C Tlak: (3,5…4,5) bar Kakovost vode: mehansko čista, vizualno bistra pH-vrednost (pri 20 °C): (6,5…8) Najv. velikost delcev: < 25 μm Trdota vode: < 15 °dH Kloridni ioni: < 80 mg/l Skupna vsebnost klora in sulfata: < 160 mg/l Hlajenje (uparjalnik): Poraba 3: (1,5…2,5) m3×h-1 Vstopna temperatura: (6…10) °C Izhodna temperatura: (12…15) °C Tlak: (3,5…4,5) bar Kakovost vode: mehansko čista, vizualno bistra pH-vrednost (pri 20 °C): (6,5…8) Najv. velikost delcev: < 25 μm Trdota vode: < 15 °dH Kloridni ioni: < 80 mg/l Skupna vsebnost klora in sulfata: < 160 mg/l

Stanje: rabljeno, lahko se uporablja za paniranje ali pomokanje (samo suhi premazi) idealno za nepravilne oblike v celoti iz nerjavečega jekla Hsdpfxoy Nx Huo Alfofg brezstopenjska regulacija hitrosti premično izhodni trak širina traku 400 mm zunanje dimenzije (D x Š x V): pribl. 3.000 x 1.600 x 1.900 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN 1171, teža obdelovanca (maks.): 450 kg, delovna višina: 870 mm, hitrost podajanja osi Y: 45 m/min, delovna širina: 300 mm, trajanje garancije: 12 meseci, skupna dolžina: 1.900 mm, vrsta nastavitve višine: mehanski, skupna masa: 450 kg, skupna višina: 1.500 mm, skupna širina: 1.300 mm, priključek za stisnjen zrak: 6 letvica, Oprema: dokumentacija / priročnik, The APACHE 3 is a cost-effective solution designed for both artisanal and industrial use, perfectly suited for coating façade cladding and its substructures. It is ideally and unrestrictedly suited for coating cross-sections of 300 mm x 25 mm and produces flawless surfaces very efficiently and economically—without the operator needing any special prior knowledge. The unit can also be integrated into automated plants or coating lines. It is capable of coating boards, profile boards, tongue-and-groove boards, rhomboid profiles, laminated and structural timber, decking boards, garden, log cabin, sauna, or privacy screens—all products requiring a top-quality visible surface. Their substructures (typically black) are coated using thin, highly pigmented stains with wood protection agents, without the need for side brushes. The APACHE 3 distinguishes itself from standard market products through its robust monoblock welded steel construction and a coating applied with a curing process using highly resistant Teflon (enamel). This non-stick coating ensures a self-cleaning, exceptionally low-maintenance operation. The machine offered is brand new and available for viewing in our showroom. We are happy to demonstrate our machines and systems either at our facility or at a customer's location near you. For more information and detailed description, please visit our SARMAX website. APACHE 3 Serial Number: SN 1171 Flood coating machine with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency controlled: 10 - 45 m/min Number of driven transport rollers: 3 Ø of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Ø of brushes: 160 mm Central brush drive: 2.2 kW Pneumatic blow-out left/right, fan nozzles for blowing out tongue and groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Hodpoxhquxefx Alfefg Weight approx.: 450 kg Operation: via command and display units in accordance with VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Colour, design: grey RAL 7046

Stanje: rabljeno, številka stroja/vozila: 007928, Pozicija 1: Krtačni stroj CEFLA-EASY 2000 + TR2V-FV3 Pozicija 2: Lakirni stroj CEFLA-EASY 2000 + TR2V-FV3 Hfsdpfx Alowu Ackefjg Pozicija 3: Sušilec laka CEFLA-EASY 2000 + TR2V-FV3