Mep Shark 282 Nc Evo nakup rabljenega (6.498)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, MEP Shark 282 NC evo, tračna žaga. Ta robustna žaga je idealna za natančne reze v različnih materialih. Cedpjzmikvofx Aiqohc MEP Shark 282 NC evo Proizvajalec: Mep Tip: Shark 282 NC evo Letnik izdelave: 2008 Stanje: rabljeno Dodatne informacije na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 250 mm, največja širina rezanja: 280 mm, dolžina tračnega lista: 2.950 mm, hitrost tračne žage: 1.667 mm/s, širina tračne žage: 27 mm, TEHNIČNI PODATKI Mere tračne žage: 2.950 x 27 x 0,9 mm Hitrost: 15-100 m/min Odprtina primeža: 285 mm Območje rezanja pri 90° okroglo: 250 mm Območje rezanja pri 90° kvadratno: 220 mm Območje rezanja pri 90° ploščato: 280 x 220 mm Območje rezanja pri 60° okroglo: 120 mm Območje rezanja pri 60° kvadratno: 80 mm Območje rezanja pri 60° ploščato: 140 x 100 mm Območje rezanja pri 45° okroglo: 230/200 mm Območje rezanja pri 45° kvadratno: 200/170 mm Območje rezanja pri 45° ploščato: 220 x 200/200 x 140 mm Chsdpfxszapxzo Aiqjc Krmiljenje: klasično PODATKI O STROJU Skupna priključna moč: 2,2 kW Teža: 990 kg Dimenzije stroja: 2.500 x 2.230 x 2.050 mm

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Bandsaw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic-dynamic and manual function, equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: Upon cycle start: - vice closes and motor starts – saw head lowers for the cut – motor switches off – saw head rises – vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: New centralized control panel on an articulated arm, allowing the operator to operate easily from any working position. Cjdpfxofg E H Se Aiqohc Control unit with low voltage: Polyester membrane keypad with thermo-formed, raised keys and activation status indicator. Display shows: * Diagnostics (messages in the user’s language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time taken for each cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. Manual 24 V cycle IP55 selector. Complete program for all special cutting cycles. Detection of additional special cutting cycles for specific applications Latest generation hydraulic control unit: highly efficient and energy-saving. Large working area with rotary table on roller bearings, 265 mm diameter with preloaded thrust bearings, mounted. Dual blade speed (36/72 m/min) with control Prepared for installation of an electronic inverter for continuous blade speed adjustment from 20 to 90 m/min. Stroke length of the saw bow programmable directly from the control panel, adjustable to the workpiece. Vice clamping device laterally adjustable left/right, with rapid-action vice. Manual blade tensioning control displayed on the screen via electronic converter. Base with pull-out coolant tray. Electric coolant pump for blade cooling and lubrication. Prepared for installation of a minimal blade lubrication unit (optional), in addition to standard emulsion oil lubrication. Chip removal brush. Machine designed for pallet truck transport. Length stop for repetitive cutting operations. Material support arm with roller for mounting the loading table. Bi-metal bandsaw blade for solid and section material. Tools and operating instructions in required user language.

Stanje: rabljeno, Leto izdelave: 2019, Premer reza: 250 mm Območje reza pri 90 stopinjah: ploščato 280 x 220 mm Območje reza pri 90 stopinjah: kvadratno 220 x 220 mm Območje reza pri 45 stopinjah: ploščato 220 x 200 mm Območje reza pri 45 stopinjah: okroglo 230 mm Območje reza pri 45 stopinjah: kvadratno 200 x 200 mm Območje reza pri 60 stopinjah: ploščato 140 x 100 mm Območje reza pri 60 stopinjah: kvadratno 100 x 100 mm Območje reza pri 60 stopinjah: okroglo 150 mm Vpenjalna priprava: 285 mm Codpfxozvhkmj Aiqjhc Območje hitrosti: 36/72 m/min Dimenzije traku žage: 2950x27x0,9 mm Skupna potrebna moč: 1,5 / 1,8 kW Teža stroja: približno 460 kg Potreben prostor: približno 1150 x 1970 mm Oprema: - robusten elektro-hidravlični polavtomatski stroj za rezanje z žago (INDUSTRIJSKI) - z možnostjo rezanja pod kotom 45° v desno do 60° v levo * nastavitev kota z velikim vrtljivim kolesom - nadzorni sistem MEP z mikroprocesorjem EVO za nadzor vseh funkcij * spredaj na desni strani, vrtljiv - izbirno ročno ali avtomatsko spuščanje žagine glave * brezstopenjska nastavitev spuščanja žagine glave - vodilo za žago iz plošč iz trde kovine - hidravlična napenjalna naprava za žago – vključno z digitalnim prikazovalnikom vrednosti - 2 hitrosti žage - sistem za hlajenje - 1x kotna opora - krtača za čiščenje žagovine - podstavek stroja z žepi za viličar - navodila za uporabo v nemščini - nadomestni žagni trakovi Način delovanja polavtomatski način: - elektro-hidravlično vpenjanje - elektro-hidravlično spuščanje žagine glave - elektro-hidravlično dvigovanje žagine glave - elektro-hidravlično odpiranje *Dodatna oprema: - 2000 mm valjčna transportna miza za dovod - 2000 mm valjčna transportna miza za odvod, vključno z oporo

Stanje: novo, Model designation: Shark 282 SXI evo Codpfx Asgvkctoiqjhc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, vrsta vhodnega toka: Enosmerni tok, največja višina reza: 285 mm, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Cedpfx Aiszzkthoqjhc Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 400 kg, POLAVTOMATSKI ŽAGALNI STROJ Z PNEVMATSKO OBJEMALNO NAPRAVO, MEP SHARK 280. Cedpfx Aiez H Ixpeqjhc

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, Rabljena avtomatska tračna žaga MEP Shark 350 NC HS 5.0 Dimenzije lista: 4640x34x1.1mm Hitrost lista: od 15-115 m/min (inverter) Avtomatski napenjalec lista: 1600kg Avtomatski transporter opilkov Chodpfx Aijwwr Tqeqjc Nastavljiv pritisk primežov Kapaciteta reza: okroglo 350mm, kvadrat 350x350mm Leto izdelave: 2020 Dimenzije stroja: 3045x2025x(v)2225mm Teža: 2800kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Kapaciteta reza pri 90° (okrogla cev): ø250 mm Kapaciteta reza pri 90° (pravokotna): 280 x 220 mm Kapaciteta reza pri +45° (okrogla cev): ø230 mm Kapaciteta reza pri +45° (pravokotna): 220 x 200 mm Kapaciteta reza pri -45° (okrogla cev): ø200 mm Kapaciteta reza pri -45° (pravokotna): 200 x 140 mm Kapaciteta reza pri +60° (okrogla cev): ø120 mm Chedpfozi Acksx Aiqoc Kapaciteta reza pri +60° (pravokotna): 140 x 80 mm Območje kota reza: -45° do +60° Pas žage: 2950 x 27 x 0,9 mm Hitrosti pasu: 36/72 m/min Višina delovne mize: 285 mm Izvedba: Polavtomatska tračna žaga, hidravlična vpenjalna naprava Država izvora: Italija Moč motorja: 1,5/1,8 kW Mere stroja (D × Š × V): 165 x 115 x 180 cm Teža stroja: 475 kg

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice Chedpfjxaa S Rox Aiqsc - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Rabljena avtomatska hidravlična tračna žaga za kovino MEP Shark 230 nc hs 5.0 Avtomatski polžasti odstranjevalec opilkov Dimenzije lista: 2950x27x0,9 Izbira rezalne hitrosti z variatorjem: od 15-100 m/min Kapaciteta reza: okroglo 230mm, kvadrat 230x230mm Chodpfx Astva Nhoiqec Generalno servisiran in obnovljen stroj Letnik: 2015 Max. rezalna kapaciteta je 230 × 230 mm Možnost rezov tudi v polavtomatskem načinu Stroj je v celoti servisiran.

Stanje: novo, 2 brzine 36/72 m/min Otvor stegača 285 mm Cedpfx Aoyv Naroiqohc Dimenzije tračne testere 2950 x 27 x 0,9 mm Oblast rezanja pod 90 stepeni: kvadratni profil 220 mm Oblast rezanja pod 90 stepeni: okrugli profil 250 mm Oblast rezanja pod 90 stepeni: ravni profil 280x220 mm Oblast rezanja pod 60 stepeni: okrugli profil 120 mm Oblast rezanja pod 60 stepeni: kvadratni profil 80 mm Oblast rezanja pod 60 stepeni: ravni profil 140x100 mm Oblast rezanja pod 45 stepeni: okrugli profil 230/200 mm Oblast rezanja pod 45 stepeni: kvadratni profil 200/170 mm Oblast rezanja pod 45 stepeni: ravni profil 220x200/200x140 mm Ukupna potrebna snaga 1,5/1,8 kW Težina 485 kg Dimenzije mašine 1970x1150x1840 mm Poluautomatska funkcija: - Stegač se zatvara i motor se pokreće - Glava testere se spušta za rezanje - Motor se isključuje - Glava testere se podiže, stegač se otvara Poluautomatski dinamički sistem: ručno spuštanje testerskog luka do željene pozicije i pokretanje ciklusa preko ručnog tastera. Gornja pozicija se automatski memoriše.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Cjdpfx Aioxaatbjqjhc Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: dober (rabljeno), Leto izdelave: 2014, Cutting range 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Codpfxozkbn Uj Aiqshc Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2.0 mm Minimum cutting diameter 5.0 mm Band speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Control MEP CNC Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Current new price approx. EUR 23,000 Special price on request Equipment: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and quick adjustment of all machine parameters * With additional soft keys + backlit display * 10 programs, each with a max. of 9999 pieces and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of the cutting feed, indicated in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cut start - Large, adjustable cast steel guide wheels - Saw band tensioning with tension control and display indication - Carbide band guides for highest cutting precision - Automatic monitoring of cutting load - Quick-action vice * With replaceable clamping and stop jaws - Large, side pull-out chip tray and coolant tank * Fitted with 2 electric pumps for band lubrication and cooling * Coolant gun for machine cleaning - Swarf removal brush for cleaning the saw band - Operating manual in German Manufacturer’s information: If this saw is installed in a network with a residual current circuit breaker (RCD), the breaker should be all-current sensitive and rated not less than 300 mA.

Stanje: novo, Cutting diameter, round: 230 mm Cutting diameter, square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 - 100 m/min Total connected load: 2.2 kW Machine weight: approx. 1.2 t Chedpfsfg E Hyjx Aiqjc SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steel, solid and profile materials, with a maximum remnant length of 60 mm. - Maximum cutting cross-section: 230 x 230 mm. - Numerically controlled bandsaw with a new Windows “CE” based IGE system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters. - Safety enclosure in compliance with the latest Machinery Directive EN 13898/2007 safety standards. - New fieldbus communication system with dual microprocessor and serial interface. - Robust cast iron construction (G25) to compensate for vibrations, increase machine stability, and extend the service life of the saw blade.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. Csdpfx Aiofg E Hzsqjhc + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: skoraj kot novo (rabljeno), Polavtomatska, elektro-hidravlična tračna žaga Dimenzije lista: 2950x27x0,9mm Codpfszlimbsx Aiqshc Žaga je primerna za razrez trdnih kovin in kovinskih profilov srednjih presekov do 280x200 mm pri kotu 0°; Razpon pri rezanju pod kotom: od 0° do 60° v levo; Z DODATNO OPREMO - ročni in ročno dinamični rezalni cikel Leto izdelave:2025

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 280 mm, največja širina rezanja: 330 mm, dolžina tračnega lista: 3.650 mm, hitrost tračne žage: 1.667 mm/s, širina tračne žage: 27 mm, TEHNIČNE PODROBNOSTI Mere tračne žage: 3.650 x 27 x 0,9 mm Hitrost: 15/100 m/min Območje rezanja pri 90° okroglo: 280 mm Območje rezanja pri 90° kvadratno: 260 mm Območje rezanja pri 90° ploščato: 330 x 260 mm Območje rezanja pri 45° okroglo: 260 mm Območje rezanja pri 45° kvadratno: 250 mm Območje rezanja pri 45° ploščato: 270 x 200 mm Območje rezanja pri 60° okroglo: 180 mm Območje rezanja pri 60° kvadratno: 170 mm Cjdpfxjzaptro Aiqjhc Območje rezanja pri 60° ploščato: 170 x 170 mm PODROBNOSTI O STROJU Skupna potrebna moč: 2,2 kW Teža: 1.240 kg Primež: 340 mm Dimenzije: 2.020 x 2.040 x 1.740 mm OPREMA - Valjčna proga 2.000 mm

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Chsdpfxjfg E H Ue Aiqec Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: dober (rabljeno), Leto izdelave: 2004, Tračna žaga v dobrem stanju + 2 dodatna nova žagalna traka Csdjy Txb Tspfx Aiqjhc

Stanje: novo, Leto izdelave: 2023, Premer rezanja 350 mm Dolžina traku žage 4640 x 34 x 1,1 mm Višina mize 860 mm Premer rezanja 350 mm Hitrost rezanja 15 – 100 m/min Skupna potrebna moč 4,0 kW Teža stroja približno 2800 kg Potreben prostor približno 2200 x 3200 x 2200 mm Razstavni stroj Aktualna nova cena 55.910 evrov Avtomatska tračna žaga z vodilom z dvema stebroma za serijsko rezanje, zlasti pri materialih, ki se težko obdelujejo, in pri masivnih materialih. S tem strojem vam MEP ponuja stroj, ki je tehnično na najvišji ravni in ima zahvaljujoč uporabi visokokakovostnih materialov izjemno robustno in torzijsko trdno konstrukcijo, ki jo je težko preseči. Izjemno robusten lok žage iz sive litine zagotavlja potrebno stabilnost, ki omogoča impresivne rezultate rezanja, močne stebre iz sive litine, na katerih se lok žage premika po vnaprej napetih linearnih vodilih, pa tudi pri največji obremenitvi zagotavljajo najvišjo natančnost rezanja. Sodoben nadzor stroja (MEP NC 5.0) uporabniku ponuja maksimalno udobje pri upravljanju in zagotavlja nemoteno delovanje. (Nadzor/ocena/korekcija v realnem času) NAJVIŠJA ZMOŽNOST > Dva načina delovanja (polavtomatski in avtomatski) omogočata učinkovito rezanje v vseh pogojih. > Nadzorni sistem omogoča shranjevanje do 100 programov rezanja z različnimi količinami in dolžinami, kar zmanjšuje čas programiranja pri pogosto izvajani delu. > Samodejno zaznana začetni položaj glave žage skrajša čas nastavitve. > Pomik glave žage preko linearnih vodil, ki jih poganjajo hidravlični cilindri z vnaprej napetimi krogličnimi ležaji, zagotavlja zmanjšanje mehanskih vibracij pri rezanju in večjo stabilnost. > Samodejna nastavitev sprednje vodilne glave žage glede na dimenzije rezanega materiala skrajša čas obdelave. > Napetost žage se izvaja preko brezkrtačnega motorja in se nenehno nadzoruje ter samodejno prilagaja nastavljeni minimalni vrednosti. IZJEMNO PRILAGODLJIV > Sistem za pomik s 600 mm hoda je ponovljiv in reže vse dolžine. > Vertikalni par valjev omogoča držanje in usmerjanje vseh vrst palic ali svežnjev, ki se dovajajo. > Vektorjev pogon za brezstopenjsko nastavitev hitrosti rezila od 15 do 100 m/min omogoča rezanje vseh materialov. > Motoriziran odvajalnik žagovine je mogoče namestiti na desno ali levo stran od območja rezanja. Codpfxelf Tu Ue Aiqshc LASTNOSTI: Popolnoma avtomatski nadzor – NC 5.0 - Inovativni nadzor na dotik (na podlagi Windows CE) z dodatnimi mehanskimi gumbi za pogosto uporabljene funkcije. - USB-vhod - Joy-stick za ročno upravljanje osi (X-Y) - Nadzorovan spust glave z avtomatskim izravnavanjem preko servo ventila, nameščenega v cilindru, nenehno spremljanje prednastavljenega navora in natančna nastavitev pomika v milimetrih/minuti. - Nastavitev/prednastavitev brezstopenjske hitrosti traku v m/min. - Napetost žage z nadzorom napetosti in prikazom na zaslonu preko elektronskega pretvornika. - Samodejno zaznavanje začetka reza. - Velik barvni zaslon na dotik 7" za prikaz in izbiro vseh funkcij in parametrov stroja ter programiranje v nekaj sekundah.

Stanje: novo, Premer reza 250 mm Dolžina tračnega lista 2950x27x0,9 mm Hitrost tračnega lista 36/72 m/min Skupna priključna moč 1,8 kW Teža stroja pribl. 440 kg Absolutna posebna cena!! 7170,-EUR (Aktualna cena od 2024 je 9425,-EUR) Osnovna oprema: Cjdpfjfg E H Nex Aiqshc Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili Hidravlična naprava za napenjanje traku z indikatorjem napetosti Podnožje s snemljivo kadjo za hladilno tekočino Krtača za odstranjevanje ostružkov Nastavljeni precizni prisloni za reze pod: 0°, 45° in 60° levo ter 45° desno Obračevalna plošča za dvojne poševne reze Električna naprava za dovod hladilne tekočine 48 V (Možna dodatna namestitev mikro-razpršilne enote)

Stanje: novo, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 350 mm Saw band dimensions 4640x34x1.1 mm Vise opening 355 mm Saw band speed 15-115 m/min Machine weight approx. 2800 kg Space requirement approx. 3050x2190x2200 mm Shark 350 NC HS 5.0, automatic hydraulic band saw in dual-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350x350 mm. Standard features include: + Powered chip conveyor, installable on either side of the machine (left or right). + Adjustable clamping pressure for the vices. + Infeed carriage with vertical rollers for lateral material support. - Numerically controlled band saw, can also be operated semi-automatically, equipped with the new MEP 50 control, specifically developed by MEP for automatic machines, based on Windows "CE". - 'Clean cut' cycle: The infeed moves the workpiece backward to avoid scoring on the cut surface when the band rises at the end of the cut. - Fieldbus communication system with dual microprocessor and serial connection. - User interface with 7” touch screen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use with real-time monitoring of all cutting parameters. - Automatic detection of the cutting start position. - CNC machine for storing up to 100 cutting programs with various batch quantities and cutting lengths; up to 100 of these can be selected as a sequence. - Heavy-duty cast iron construction to absorb vibrations, ensuring stable cutting accuracy and a long service life for the saw blade. - Hydraulic feed of the saw bow on linear guides with preloaded ball bearing rails. - Hydraulic control unit for opening/closing of feed and front vices. - Infinitely variable saw band speed adjustment from 15 to 110 m/min via vector inverter. - Material feed with stepper motor and ball screw mounted on opposing bearings, 600 mm stroke, repeatable for any length. - Max. remnant piece length 120 mm plus cutting length (OPTIONAL: feeder jaws to minimize remnant to 25 mm plus cutting length). Codpfx Aioyv Nd Reqjhc - Cut path monitoring (OPTIONAL) - Material feeder with self-aligning feed vice to handle slightly bent material. - Saw drive wheel is secured by a taper bush for optimal and adjustable axial fixing. - Management software for monitoring/evaluation/correction in real time of the following parameters: - Cutting force - Cutting torque and saw band tension compared to set values - Adjustable saw band guide heads made of steel with combined roller and carbide guides, including control valves for conventional recirculating lubrication. - Prepared for installation of OPTIONAL minimum quantity lubrication system. - Adjustment of the saw band drive wheel for saw blade replacement directly from the operator panel. - Automatic adjustment of the front saw band guide head to material size. - Machine...

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: Cjdpefg E H Eofx Aiqohc - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, številka stroja/vozila: 200421-16/0, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, dolžina tračnega lista: 4.640 mm, širina tračne žage: 34 mm, TEHNIČNE PODROBNOSTI Vrsta žage: Polavtomatska Orientacija: Horizontalna Kotni rez: Da Premer reza (okrogli material): 360 mm Dolžina žage: 4.640 mm Širina žage: 34 mm Debelina žage: 1,1 mm PODROBNOSTI O STROJU Nadzor: Učenje (Teach-in) Cjdpfx Aiezrmnisqjhc Napetost obdelovanca: Hidravlična Moč: 3,5 kW Teža za transport: 1.500 kg Transportni paketi: 1 kos OPREMA Označba CE