Mep Shark 281 Ccs / Mde nakup rabljenega (3.865)

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90° (flat): 280 x 200 mm Cutting range at 90° (square): 230 x 230 mm Cutting range at 45° (round): 190 mm Cutting range at 45° (flat): 180 x 180 mm Cutting range at 45° (square): 180 x 180 mm Cutting range at 60° (flat): 110 x 110 mm Cutting range at 60° (square): 110 x 110 mm Cutting range at 60° (round): 120 mm Vice opening: 285 mm Blade speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 370 kg Space requirement: approx. 1620 x 1360 mm Equipment/features: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic lowering of the saw bow Fodpfjxaa H Isx Aplepg * With infinitely adjustable feed * End stop at end of cut - Manual cutting function selectable - 2x band saw speeds - Carbide blade guides - 1x saw blade - 1x angle stop - Integrated chip cleaning brush - Operator panel - front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing unit

Stanje: novo, Sägebandabmessungen 2950x27x0,9 mm Fodpfxoyvvqks Aplepg 2 Geschwindigkeiten 36/72 m/min Schraubstocköffnung 285 mm Schnittbereich bei 90 Grad: rund 250 mm Schnittbereich bei 90 Grad: vierkant 230 mm Schnittbereich bei 90 Grad: flach 280x200 mm Schnittbereich bei 45 Grad: rund 190 mm Schnittbereich bei 45 Grad: vierkant 180 mm Schnittbereich bei 45 Grad: flach 180x180 mm Schnittbereich bei 60 Grad: rund 120 mm Schnittbereich bei 60 Grad: vierkant 110 mm Schnittbereich bei 60 Grad: flach 110x110 mm Gesamtleistungsbedarf 1,5/1,8 kW Gewicht 375 kg Abmessungen 1700x1000x1650 mm Ausstattung: - mit halbautomatischer Absenkung - Das CUT CONTROL SYSTEM ermöglicht eine halbautomatische Absenkung des Sägebogens durch das Gewicht des Sägekopfes - Die Absenkgeschwindigkeit wird stufenlos reguliert. Einzelschnitte können so mit gleichmäßigem Vorschub durchgeführt werden

Stanje: novo, Cutting diameter 250 mm Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Fodpfofg E H Iex Apljpg Band speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t MEP Sawing Machine: Saw frame, vise unit, and base made of high-strength cast iron Precision angle scale on the cast iron structure Electrical system (with fully identifiable wiring and 24 V low voltage system) Switch handle IP 55 for manual cycles (if applicable) Rotating chip removal brush for the saw band Vise unit with quick approach Precise stops with setting for miter cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, user manuals, and spare parts order instructions in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual mode and cutting with automatic head feed by gravity. CCS (Cut Control System) with (A: selector switch for manual and automatic cutting – B: adjustment of the cutting speed – C: hydraulic brake with reservoir – D: end stop for stopping the band); also available as an option for already produced machines. Quick-adjust vise Hydraulic indicator for band tension Electric coolant pump for cooling and lubricating the saw band and easily accessible coolant tray above the base frame On versions with pneumatic vise (MA), opening and closing of the vise are controlled by a manual valve (optionally foot-operated).

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 110 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 440 kg Space requirement: approx. 1620 x 1360 mm Equipment: - Robust electro-hydraulic bandsaw (industrial) - Large, bearing-mounted turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow descent * With stepless, adjustable feed * Limit switch at end of cut - Manual cutting operation selectable - Two blade speeds - Carbide blade guides - 1x saw blade - 1x mitre stop - Integrated chip brush - Control panel – front right - Hydraulic tensioning device for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system Fodsxabpwjpfx Aplspg

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting area at 90 degrees - flat: 280 x 200 mm Fodpoxz Hhzofx Aplepg Cutting area at 90 degrees - square: 230 mm Cutting area at 45 degrees - round: 190 mm Cutting area at 45 degrees - flat: 180 x 180 mm Cutting area at 45 degrees - square: 180 mm Cutting area at 60 degrees - round: 120 mm Cutting area at 60 degrees - flat: 110 x 110 mm Cutting area at 60 degrees - square: 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Powerful mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut) Description: -Manual cutting cycle -AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring -Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel -Quick-release vice -Carbide blade guides for maximum cutting precision -Large, adjustable cast steel band wheels -Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg) -Clearly arranged control panel with all operating elements -Electric coolant pump for cooling and lubricating the saw blade -Chip removal brush for cleaning the saw blade

Stanje: novo, Model designation Shark 281 CCS Fedpfxjgvkchs Aplepg

Stanje: rabljeno, Leto izdelave: 2009, Velika, robustna žaga priznanega proizvajalca MEP SHARK CCS HYDRA - Popoln polavtomat - Premer rezanja gredi: 300 mm - Dimenzije: 320x260 mm - Zasuk LEVO/DESNO - Rezilni trak: 3320x27x09 - Hladilna črpalka - Samodejni pritisek primeža - Teža stroja: 700 kg - Originalna valjčna miza (100 kg) Fpsdpfx Asy Ani Esplog - Priloženi 3 novi rezilni trakovi - Originalna dokumentacija Stroj je originalen in v zelo dobrem tehničnem stanju, pripravljen za delo, možen ogled v Głoskowe pri Varšavi.

Stanje: delavnici obnovljeno (rabljeno), Rabljena polavtomatska tračna žaga MEP Shark 281 sxi evo Trije načini delovanja: Polavtomatsko, ročno in ročno dinamično (gravitacijsko) Dimenzije žaginega lista: 2950 x 27 x 0,9 mm Dve hitrosti rezila: 36/72 m/min Max odptje primeža: 285mm Kapaciteta reza: pri 0° okroglo 250mm, pravokotnik 280x200mm pri 45°okroglo 190mm, pravokotnik 180x180mm Fedpfxsyyn Suo Aplspg Pri 60° okroglo 120mm, pravokotnik 110x110mm Letnik 2006 Teža:435Kg V celoti servisirana.

Stanje: novo, Dimenzije tračne testere 2950x27x0,9 mm 2 brzine 36/72 m/min Otvor stege 285 mm Opseg sečenja pod 90 stepeni: okruglo 250 mm Opseg sečenja pod 90 stepeni: kvadrat 220 mm Opseg sečenja pod 90 stepeni: pločasto 280x220 mm Opseg sečenja pod 45 stepeni: okruglo 230/200 mm Opseg sečenja pod 45 stepeni: kvadrat 200/170 mm Opseg sečenja pod 45 stepeni: pločasto 220x200/200x140 mm Opseg sečenja pod 60 stepeni: okruglo 120 mm Opseg sečenja pod 60 stepeni: kvadrat 80 mm Opseg sečenja pod 60 stepeni: pločasto 140x100 mm Snaga 1,5 / 1,8 kW Težina 440 kg Dimenzije 1700x1000x1650 mm - sa poluautomatskim spuštanjem - CUT CONTROL SYSTEM omogućava poluautomatsko spuštanje luka testere težinom glave testere - Brzina spuštanja se bezstupanjski podešava. Pojedinačni rezovi mogu se izvoditi sa ravnomernim napredovanjem - SHARK 282 CCS poseduje obrtni sto za obostrano sečenje pod uglom. Rez se uvek odvija u istoj brazdi Fodpjyv Nptjfx Aplspg

Stanje: novo, 2 hitrosti 36/72 m/min Fedpsyv Nfuofx Aplspg Vpenjalna širina primeža 285 mm Območje reza pri 90 stopinjah: okroglo 250 mm Območje reza pri 90 stopinjah: kvadratno 230 mm Območje reza pri 90 stopinjah: ploščato 280x200 mm Območje reza pri 45 stopinjah: okroglo 190 mm Območje reza pri 45 stopinjah: kvadratno 180 mm Območje reza pri 45 stopinjah: ploščato 180x180 mm Območje reza pri 60 stopinjah: okroglo 120 mm Območje reza pri 60 stopinjah: kvadratno 110 mm Območje reza pri 60 stopinjah: ploščato 110x110 mm Dimenzije žaginega traku 2950 x 27 x 0,9 mm Moč 1,5 / 1,8 kW Teža 435 kg Dimenzije 1700x1000x1840 mm Polavtomatska funkcija: - Primež se zapre in motor se zažene - Glava žage se za rez spusti - Motor se izklopi - Glava žage se dvigne – primež se odpre

Stanje: novo, Mere žage tračne: 3320x27x0,9 mm 2 hitrosti: 40/80 m/min Odprtina primeža: 335 mm Območje reza pri 90 stopinjah: okroglo 300 mm Območje reza pri 90 stopinjah: kvadratno 260 mm Območje reza pri 90 stopinjah: ploščato 330x260 mm Območje reza pri 45 stopinjah levo: okroglo 260 mm Območje reza pri 45 stopinjah levo: kvadratno 250 mm Območje reza pri 45 stopinjah levo: ploščato 270x200 mm Območje reza pri 60 stopinjah: okroglo 180 mm Območje reza pri 60 stopinjah: kvadratno 170 mm Območje reza pri 60 stopinjah: ploščato 170x170 mm Območje reza pri 45 stopinjah desno: okroglo 200 mm Fpodpsyv Na Sefx Aplsg Območje reza pri 45 stopinjah desno: kvadratno 180 mm Območje reza pri 45 stopinjah desno: ploščato 200x160 mm Teža stroja cca. 640 kg Potrebni prostor cca. 2140x1300x1950 mm

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Fpsdjfg E H Rjpfx Aplog Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts; the saw head lowers for the cut, the motor switches off, the saw head lifts, and the vice opens. Some features: - New centralized control console on a pivoting arm. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Base frame with pull-out coolant tank. The machine fully complies with all CE regulations!

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Fedpfofg E H Tox Aplspg Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Machine is designed for pallet truck transport. Bimetal saw band for solid and profile material. Tool kit and operating instructions included.

Stanje: novo, Premer reza 250 mm Fpodsfg E H Nopfx Apljg Dolžina tračnega lista 2950x27x0,9 mm Hitrost tračnega lista 36/72 m/min Skupna priključna moč 1,8 kW Teža stroja pribl. 440 kg Absolutna posebna cena!! 7170,-EUR (Aktualna cena od 2024 je 9425,-EUR) Osnovna oprema: Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili Hidravlična naprava za napenjanje traku z indikatorjem napetosti Podnožje s snemljivo kadjo za hladilno tekočino Krtača za odstranjevanje ostružkov Nastavljeni precizni prisloni za reze pod: 0°, 45° in 60° levo ter 45° desno Obračevalna plošča za dvojne poševne reze Električna naprava za dovod hladilne tekočine 48 V (Možna dodatna namestitev mikro-razpršilne enote)

Stanje: novo, Leto izdelave: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via compensation spring * Robust, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, center-axis located and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles * Quick-adjusting vice * Carbide band guides for highest cutting precision * Hydraulic unit for saw blade tensioning and monitoring, with display on manometer * Clearly arranged control panel with all operating elements * Machine base, coolant tray, coolant pump, and swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw blade dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm Fpodpfx Ajftmxvopleg * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 mm / right mm * Cutting capacity at 45 degrees: square left 200 mm / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: flat 280 x 220 mm Cutting range at 90°: square 220 x 220 mm Cutting range at 45°: round 230 mm Cutting range at 45°: flat 220 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: flat 140 x 100 mm Cutting range at 60°: square 100 x 100 mm Cutting range at 60°: round 110 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5/1.8 kW Machine weight approx. 440 kg Space requirement approx. 1,620 x 1,360 mm Fpjdpexaarkefx Aplsg Features: - Rugged electro-hydraulic bandsaw (INDUSTRIAL) - Large, bearing-mounted rotating table * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * Continuously adjustable feed rate * End stop at end of cut - Manual cutting function selectable - 2x saw band speeds - Saw band guides with carbide inserts - 1x saw band - 1x angle stop - Integrated chip removal brush - Control panel – front right - Hydraulic pressure cylinder for saw band tensioning * With analog pressure gauge (manometer) - Machine base with forklift slots - Coolant system - Operating manual in German

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, vrsta vhodnega toka: Enosmerni tok, največja višina reza: 285 mm, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Fpedpfxjxyywmo Aplsg Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: square 250 x 250 mm Fsdpfxoxaagbe Aplspg Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 170 x 170 mm Cutting capacity at 60 degrees: round 180 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP EVO microprocessor control for monitoring all functions * Mounted front right, swivelling - Choice of manual or automatic saw frame descent * Infinitely variable adjustment of bow descent - Carbide blade guides - Hydraulic blade tensioning including digital value display - 2x saw blade speeds - 1x Bi-metal saw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 250 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Machine weight: approx. 640 kg Equipment: - Heavy-duty electro-hydraulic band saw (INDUSTRIAL) - Large, mounted rotary table * For miter cuts from 45° right to 60° left - Automatic saw frame lowering * Infinitely variable feed rate * Automatic cut-off at end of cut - Manual cutting mode selectable - 2 saw band speeds - Saw blade guide made from carbide plates - 1x saw blade Fpedpfx Aexaaqtjplog - 1x angle stop - Swarf removal brush (rotating with blade) - Control panel - front right - Hydraulic tensioner for saw blade * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant system - Operating manual in German

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Fsdsxaa S Rspfx Apljpg Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Cutting diameter 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Material support height 600 mm Feed min/max 50,000 mm Vise opening 335 mm Blade speed 15 - 100 m/min Automatic feed 600 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1,105 kg Dimensions (L x W x H) 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally equipped with: * semi-automatic * semi-automatic dynamic * manual operation modes Description: Fjdjxab S Espfx Aplepg - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP - WINDOWS CNC control unit * User interface with 7” touchscreen display * Mechanical keys for machine operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivel arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycles selectable * For non-programmed cutting operations - Safety enclosure for operator protection - Infinitely variable cutting speed adjustment from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * Highly efficient with low energy consumption - Material feed via stepper motor and ball screw * Mounted on counter-rotating ball bearings * Single stroke 600 mm, repeatable for any required length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display indicator * Electronic converter - Automatic monitoring of cutting force * Servo valve mounted directly on the cylinder - Coolant tray integrated into machine base - Chip removal brush - Bimetal saw blade for solid and profile materials - Tool kit and operating manual with spare parts list * Mitre accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: Fjdpjw U U Uwsfx Aplepg - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vise 340 mm opening Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions L-W-H 1800 x 1900 x 1750 mm Features: - Heavy-duty electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 control and 7” touch-screen display * Easy and fast setting of all machine parameters * With additional softkeys + backlit display * 10 programs, each with max. 9999 piece counting and max. 9999.9 mm length - Material feed with stepper motor via ball screw * Single stroke 600 mm repeatable to cut any length * Accuracy of ± 0.1/600 mm - Feeder with safety cover and safety limit switch - Precise adjustment of cutting feed, displayed in mm/min - Saw head positioning and feeder movement via joystick - Automatic detection of cut start - Large, adjustable cast steel band wheels - Saw blade tension with blade tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-acting vise * With interchangeable clamping and stop jaws - Large, side-sliding chip tray and coolant tank * Equipped with 2 electric pumps for blade lubrication and cooling * Coolant spray gun for cleaning the machine Fodpfx Aoxabwhsplopg - Chip removal brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with a residual current circuit breaker (RCD), ensure this is all-current sensitive and rated not less than 300 mA. SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Model designation: Shark 282 CCS Fpjdpfxjgvkbcj Apljg

Stanje: novo, Model designation: Shark 281 SXI evo Fsdpfx Ajgvkglsplepg