Mütek Tovarna Za Drobljenje Stiropora nakup rabljenega (84.901)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput is highly dependent on screen and input material: Kledpfx Alsh S H T Ue Njr - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Kledpfxsd H R Sxj Al Nor Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Klodpfxsb Nulho Al Njr Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics Kljdpfx Aeb Ny Eysl Ner - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Klsdpfx Alewzarco Njr Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. *Larger machines available upon request. Kjdpfx Asgbkkrol Nelr --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: novo, Leto izdelave: 2025, Moč motorja 7,5 kW - Rezna sila 30 t Rezni kanal zasnovan za: - maks. dolžina role 1500 mm - maks. premer role 1250 mm - Masa stroja cca 3800 kg - Prostornina rezervoarja cca 110 litrov - Zaščitna rešetka v območju upravljalne plošče in na nasprotni strani - Zaklep noža - Ravna izvedba razcepne mize Kledpfx Aeltmi Ssl Nor - Dokumentacija 2x v nemščini (1x v besedilni obliki, 1x USB) - Barva RAL 5012 svetlo modra Zaščitna rešetka/nožni nosilec RAL 1028 melonsko rumena Stroj na zalogi – takoj dobavljiv Cena in dodatne informacije na zahtevo

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), A complete Hosokawa mill for processing polyester resin lumps is available. Entire system: Input material: polyester resin, max. input particle size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3,000kg/h, analysis method: Alpine air jet sieve 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions (L/W/H): approx. 2100mm/2200mm/2300mm, weight: approx. 3,500kg. 2) Automatic dedusting filter AE 48 L, filter surface area: 42m², filter bags: needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, number of cutting tool rows: 4, min. hole size: 3mm, required power: 55kW. Including extraction system, conveyor system, and accessories/peripheral devices. Documentation available. Inspection on-site is possible. Kedpfx Alovdu N Ae Nslr

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer rotorja: 360 mm, moč: 45 kW (61,18 KM), Material shredder 45 kW Hopper opening: 1,030 x 1,235 mm Rotor diameter: 360 mm Star-delta start, automatic shut-off during idling - Hydraulic pusher equipped with pressure plates - Siemens PLC control - Optionally available with control cabinet extension for discharge conveyor and overband magnet separator Complete solution with discharge conveyor in any configuration. Kodpfjt Rivtjx Al Nolr Our core competency lies in delivering precisely what the customer really needs. We work together with our customers to develop custom, application-specific solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnet separator, recycling, wood chips, plastic, non-metallic metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grid, grate magnet, metal separator, block magnet, filtration systems

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Kljdpfx Alogmh H Ts Ner Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net Kjdpjd Db N Iofx Al Nslr - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.320 mm, skupna širina: 1.600 mm, skupna dolžina: 1.600 mm, moč: 15 kW (20,39 KM), SPYRA drobilnik ostružkov - Za drobljenje ostružkov s tujki - Po želji z garancijo! - Popolnoma pripravljen za uporabo - Tujki v ostružkih pri tem stroju niso težava, saj je bil posebej zasnovan in patentiran prav za ta namen. Kodpfxew N Rv Te Al Nslr Zmogljivost: 0,6 - 1,2 m³ / uro Količina pretoka je odvisna od vrste materiala, njegove sestave in števila tujkov.

Stanje: novo, Bag opener, suitable for opening bagged materials such as 'Gelber Sack' (yellow bag) and similar. Klsdpfx Aedxwlzel Ner Can be used as a stand-alone unit or integrated as a component in, for example, a sorting plant. Throughput: 6-7 t/h Drive power: approx. 18 kW Dimensions: 8000 x 2350 x 2700 mm Weight: 11 t Made to order Delivery time approx. 30 weeks Further data and quotation available upon request.

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 30 h, skupna višina: 5.380 mm, skupna širina: 4.170 mm, skupna dolžina: 5.250 mm, RECU UZ 2000 Univerzálny drvič v otvorenom vyhotovení. Výrobca: Recuperma Typ: RECU UZ 20000 Obzvlášť vhodný na šetrné a rýchle rozkladanie kompozitných materiálov, rozpojenie a znižovanie objemu. Princíp práce: - Použitie flexibilných úderových prvkov - Drvenie nárazovým účinkom vloženého materiálu - Drvenie na rôzne zrnité frakcie Výkon: Hodinový výkon závisí od veľkosti zrna a objemovej hmotnosti spracovávaného materiálu. Technické údaje (±5 %): Pohonný výkon: 250 kW, cca 1490 ot./min. Pohon: remeňový prevod Vedľajší pohon: hydraulická jednotka cca 1,5 kW Riadenie: SIEMENS Frekvenčný menič značky SEW Priemer bubna: 1900 mm Hmotnosť: 25 t Obloženie opotrebovateľnými plechmi HB450 Podávanie materiálu cez násypku Reťazový záves ako ochrana proti vyhadzovaniu častí Výstup materiálu cez posuvné dvere Stroj je momentálne nefunkčný. Cena platí pre opravený stroj. Cena bez opravy: 370 000 €. Klodpfx Aljv U Ttbs Njr Doprava nie je zahrnutá v cene.

Stanje: novo, Leto izdelave: 2025, Gospodarne rešitve s kratkimi dobavnimi roki Klsdpexmvplefx Al Nor Transportni trakovi, primerni za vse običajne sejalnice, kot so Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang in drugi Transportni trakovi, primerni za vse običajne drobilce, kot so Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 in drugi Izdelano po vaših zahtevah: - Dolžina brez omejitev - Širina do 1800 mm - 2, 3 ali 4 sloji materiala - Različni profili - Količina jeklene žice: 10cm/ 35 +/-1 - V različnih debelinah materiala Visokokakovostni transportni trakovi

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1980, Tehnični podatki: Linija za izdelavo žebljev vključuje: 1. Wafios N3 2. Wafios S75 3. Wafios S110 4. Vitari V14R 5. Vitari V17R Kedpfx Aloit Rdwo Nolr 6. Moroni SPN 200 7. Wafios brusilni stroj MSD 500 8. Polavtomatska enota za pakiranje – 1-5 kg 9. Boben za čiščenje in poliranje žebljev – 2x400 kg/h Premer žice: 1,2–6,0 mm Dolžina žebljev: 10–200 mm Kapaciteta: 900 kg/h

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Kapaciteta – 400 predoblikov/min. Leto – 2004/2008 Tovarniški sklop vključuje: 1. Stroj za brizganje plastike - Proizvajalec: KRAUSS MAFFEI - Leto: 2004 - Tip: 175-3500 CV - Moč: 110 kW - Zapiralna sila: 1.750 kN 2. Robot z avtomatskim prijemalom za 48 predoblik - Leto: 2004 - Tip: CB-PET 40 Fach 3. Enota za hlajenje predoblik - Proizvajalec: MHC Luksemburg - Leto: 2004 - Tip: PL3 4. Orodje za brizganje - Proizvajalec: MHT Luksemburg - Leto: 2004 - Teža predoblike: 40,56 g - Zmetni hod izmeta: 114 mm - Teža orodja: 1.150 kg 5. Sušilnik granulata - Proizvajalec: PIOVAN – Italija - Tip: DP 625 - Leto: 2004 - Moč: 110 kW 6. Silos za granulat - Proizvajalec: PIOVAN - Leto: 2004 - Tip: 4000 7. Hladilni sistem - Proizvajalec: PIOVAN Ksdpjgbpnmefx Al Njlr - Leto: 2004 - Tip: RPA 1200 - Moč: 10,5 kW 8. Dvigalo - Leto: 2008 - Tip: KVATP 2515E3 - Nosilnost: 5 ton - Dimenzije: 7,5 x 2,0 m

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1991, Prodamo rabljen Hazemag mlin Novorotor. Kjdjqrq Efjpfx Al Njlr Cena po dogovoru.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hard rock chipping plant – essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Metering bunker SANDVIK H-200 cone crushing unit with pre-screen Metering bunker with discharge conveyor 2 x double-deck screening plants, approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm Kjdpfeufih Dsx Al Njlr diverse conveyor and stockpile belts complete electrical installation with control cabinet in container

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Processing plant for (track) ballast 40 m³ feed bunker with pusher wagon Impact mill OMT 120 kW with feed and discharge chute Double-deck screening unit 1,400 x 4,000 mm with conveyor and stockpile belts Ksdpfstpamgox Al Nelr complete electrical installation

Stanje: nepreverjeno (rabljeno), Double toggle jaw crusher Model: RB 1200/900 Feed opening: 1,200 x 900 mm Kedper Nvk Isfx Al Njlr

Stanje: dober (rabljeno), skupna masa: 41.000 kg, Leto izdelave: 2004, obratovalne ure: 5.500 h, Single-toggle jaw crusher Kedpstpaktefx Al Nslr Feed opening: 1,000 x 650 mm Final product: approx. 0/70–0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge belts Overband magnet

Stanje: rabljeno, Drobljenje stroj UNTHA LR630 - rabljeno - Hidravlični podajalnik, Klodsy Dhtmspfx Al Nsr PLC upravljanje, Skoraj kot novo stanje, samo 63 delovnih ur ----- Tehnični podatki ----- Odprtina lijaka: 800 x 620 mm, Prostornina lijaka: 0,47 m³, Premer rotorja: 250 mm, Dolžina rotorja: 620 mm, Moč motorja: 18,5 kW, Delovne ure: 63 h, Dimenzije (DxŠxV): 1.750x1.100x1.670 mm, Dimenzije elektro omare (DxŠxV): 600 x 460 x 270 mm

Stanje: dober (rabljeno), Leto izdelave: 1989, Vertical crusher plant Voest Alpine ZS 100 Year of original construction: 1989 (machine/rotor completely overhauled) Machine number: 89 914 04 including 145 kW drive motor Kjdpfx Aleu U Ukij Nslr

Leto izdelave: 2014, stanje: rabljeno, Ponujamo rabljeni stroj za obdelavo in mletje kablov ICS-CONTEC Carrera 1D, letnik 2014. Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite. Kledpjyx Tzfofx Al Njr