Tovarna za drobljenje

Recuperma RECU UZ 2000

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 6.164 h, Doppstadt IDC000123 - proizvajalec: Doppstadt - model: DZ 750 Kombi - leto proizvodnje: 2009 - bruto masa vozila: 46.000 kg - delovne ure: 6145 Blodpfx Afovy S Dpoqsr

Leto izdelave: 2025, Stanje: skoraj kot novo (rabljeno), 2x125-ton gantry crane, 30-meter lifting height, year of manufacture 2014 Bjdpfx Afjgmdnfeqslr

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 7.847 h, Power: 440 kW (598 HP) Contact Emal Jaweed for further information. Crawler Tractor, Challenger MT875E, Year of Manufacture: 2016, Operating Hours: 7,847 h, Length: 6,400 mm, Width: 2,500 mm, Height: 3,500 mm, Weight: 23,200 kg, Track Width: 910 mm, Engine: AGCO Power, Engine Output: 440 kW, Enclosed cab, Air conditioning, Number of cylinders: 12, Air ride seat, Trimble Precision IQ display, Trimble AG-25 antenna, AdBlue, front rim weights, side frame weights, rear remote controls, additional hydraulics, ISOBUS, air brake system, front idler wheel weights, crawler chassis, GPS control, torque: 2,840 Nm. Other information: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialists in worldwide transport & shipping. Bsdper Nfahsfx Afqolr * No liability for typographical or printing errors. * Subject to errors and prior sale. * Trade-in possible. * For vehicle/machinery purchases, exclusively the General Terms and Conditions (AGBs) of Jaweed GmbH apply. * Further information as well as our terms and conditions can be found on our website. Goods are sold only under our General Terms and Conditions (AGB).

Leto izdelave: 1963, Stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Blsdpfxjh I Edvs Afqer

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Kombinirani rezervoarji Blodpegypd Hofx Afqer 30-32 m³, primerni za polžaste kompaktorje levo ali desno. Rabljeni, delujoči kombinirani rezervoarji od 4.000 € odvisno od stanja, DDV ni vključen. Možna dostava.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 14.900 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 33.000 kg, moč: 264 kW (358,94 KM), vrtljajska hitrost (min.): 70 obr/min, vhodna napetost: 400 V, Slow-running robust single-shaft shredder suitable for the pre-shredding of various materials without massive contaminants. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal or material recycling, either loose or baled. Blodpfev S Hyvjx Afqsr Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements (mm) Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m³ Rotor length: 2200 mm Rotor diameter: 745 mm Rotor speed: 50 Hz : 87 rpm Number of rotor knives: 84 pcs Knife dimensions: 172 x 57 x 28 mm Counter knives below: 6 pcs Stripping comb above: 6 pcs Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediate Two discharge conveyors available as option.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bledpevf E Avofx Afqer bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: dober (rabljeno), EINWELLEN-ZERKLEINERER WEIMA MODELL WLK15 Blodpfstqd Ndex Afqjr HAUPTMOTOR 90 KW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 25 h, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Crusher equipment Including: Special tool, reinforced, 7/7 tool holders each with 4 tools (tools consisting of main blade, pre-crushing blade, and post-crushing blade) Shaft speed individually and steplessly adjustable, approx. 0–41 rpm Including post-crushing beam Including tilting skip Drive unit Drive power 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swing-type radiator Electrics / Controls Including IFM display Including radio remote control Including 4 shredding programs (wood, waste, special, and green waste) Discharge conveyor Including discharge conveyor Custom equipment Including pre-armoring of the tools Including overband magnet, hydraulically height-adjustable – neodymium – Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Bodpou Hgllsfx Afqelr Including pressure sensors Including additional soundproofing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Complete solution for transporting bulk materials such as shredded material, wood chips, wood pellets, granules, etc. Aluminum angled conveyor belt including substructure Bljdpfei Igdfsx Afqjr Horizontal section: 2,500mm (adjustable) Inclined section: 5,000mm (adjustable) Bend angle: 35°, 40°, or 45° Loading height: horizontal (customizable) Discharge height: individually adjustable Frame: height-adjustable (mobile) Conveyor belt width: 500mm (adjustable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and corrugated sidewalls Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive, etc. ready to connect, motor control optional 8x adjustable machine feet for alignment Corrugated sidewall: 50x25mm T-50 cleats – 400mm pitch 2-ply, particularly cross-stable Fixed overband magnetic separator: Permanent overband magnetic separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic area: L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for a custom system is currently around 2–3 weeks, depending on production effort. Our core competence is delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and supply the corresponding systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application. Conveyor, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator