Mütek Systemtechnik Mpp 110 nakup rabljenega (5.691)

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Hnedpfxjffh Ate Abnor Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Hjdegl Nlmepfx Abnjnr Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Hodpfegfm Ryox Abnsnr Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant Hnodpfx Abedwktkenor - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Hnjdpfsv Rpxlox Abner Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Hnodschuvropfx Abner Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Hsdpfjrb D Nsx Abnsnr Airflow: 1,850 m³/h / 400 V

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net Hodpfx Abegmfa Asnsnr - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 6 h, Še ena strojna enota takoj na voljo! Zelo robusten stroj z visoko stiskalno silo - primeren tudi za proizvodnjo prodajne kakovosti briketov* (odvisno od materiala). Velik premer stiskalnega cilindra in 80 mm briket to omogočata. Naša najbolje prodajana serija briketirnih preš + Preizkušena, enostavna tehnika za izjemno nizko dovzetnost za napake + 25 let izkušenj, nenehen razvoj in strokovno znanje + Več tisoč strojev v uporabi pri zadovoljnih strankah + Odlično razmerje med ceno in zmogljivostjo Doplačilo za hladilno napravo: + 4.995 € neto (možno tudi naknadno) *hladi stiskalno čeljust in hidravlično olje (priporočljivo, če stroj deluje neprekinjeno več kot cca. 3,5 ure) Premer briketa: 80 mm Sprednja puša: 125 mm Maks. hoda briketa: 100 mm Optimalen hod briketa: 80 mm Zmogljivost (odvisno od materiala): do max. 200 kg/h* *odvisno od nasutne gostote *na podlagi nasutne gostote 200 kg/m³ Moč motorja: 9,2 kW 400 V / 50 Hz / 3 faze Dolžina: 2095 mm Širina: 1600 mm Višina: 1700 mm Teža: 1250 kg Količina olja: 220 litrov Premer silosa: 1200 mm Volumen silosa: cca 1 m³ Črpalka: 75 litrov Hidravlični predstiskalnik Hjdpfx Aoxfwdobnonr Možnost hlajenja stiskalne čeljusti: da, s posebno opremo Možnost hlajenja hidravličnega olja: da Hlajenje stiskalne čeljusti in olja s hladilno napravo (dodatna oprema) Možnost nadzora nivoja polnjenja: da Možnost izdelave briketov v traku: da (odvisno od materiala) Možnost povečanega polnilnega drsnika: da, s posebno opremo CE skladnost Zahteve za vhodni material: - Vsebnost vlage mora biti med 6 % in največ 15 % - Največja dolžina ostružkov: 20 mm - Temperatura postavitve: ogrevan prostor pri najmanj +5°C - Dovod mora biti prost kovin in mineralnih nečistoč kot so pesek, kamenje ipd. Poškodbe stiskalnih orodij in/ali povečana obraba so lahko posledica.

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density Hnedpfxed Nm Sis Abner *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Hnedpfx Aschqxxsbnsr Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg Hodpfx Abod N Dnhjnonr - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit *Available upon request New: With the frequency inverter option, eligible for up to a maximum of 45% government funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation *Both individual machines are fully produced and in stock; only need to be connected together 1. Technical Data – Briquetting Press: Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Hjdpfx Ajd Su Hxobnonr Front sleeve: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase Total system footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height: 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1200 kg Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option - press plier cooling: no Option - hydraulic oil cooling: yes Option - level monitoring: yes CE compliant 2. Technical Data – Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when facing the dust bin) Residual dust content:

Leto izdelave: 2010, stanje: rabljeno, Natančen nadzor nivoja za zaznavanje premajhne ali prevelike napolnjenosti steklenic. Stroj (dodatna oprema): Nadzor višine polnila P maks.: 10 bar Tok: 8 A Napetost: 230 V Frekvenca: 50/60 Hz Dolžina: 1,2 m Širina: 0,93 m Višina: 2,2 m Hodpfx Abeztzcdenonr Oprema: Zaznavanje višine polnila in zaprtosti, vključno s pihanjem zraka v ustje steklenice pred polnjenjem in odvajanjem s pomočjo zbirne mize. Teža: 350 kg

Stanje: dober (rabljeno), Rabljen, dobro stanje. Hjdofmqq Espfx Abnenr Tehnično preverjen rabljen stroj. Osnovni stroj, cena se začne pri 135.000 € neto. *Možnosti za doplačilo, glejte spodaj. Dobavni rok: približno 7 tednov po naročilu. Stroj za izdelavo briketov, na primer za lesne žagovine, lupine pšenice, material za zabavo (na primer za prašiče, da se igrajo in grizejo), živalsko krmo, lucerico ali lesne sekance. *Po želji je mogoča izdelava krajših briket. Tehnični podatki: Prostorninska zmogljivost do največ 750 kg/h (odvisno od materiala). (npr. žagovina z gostoto 250 kg/m³). Natančna ocena prostorninske zmogljivosti je možna šele po testiranju z vašim materialom. Lahko se močno razlikuje glede na gostoto izhodnega materiala. Številka carinske tarife: 84793010 Premer briketov: 65 mm Vključno z 2 m pritiskalnim kanalom Moč motorja glavnega motorja: 37 kW Moč motorja dovodnega vijaka: 2,2 kW Moč motorja kompresijskega vijaka: 5,5 kW Moč motorja hidravlične črpalke: 0,37 kW Skupna priključna moč: približno 47 kW Nadzorna plošča z jasnim prikazom za delovno stanje in indikatorjem obremenitve za glavni pogon in dovodne vijake. PLC krmilnik z merilnikom delovnih ur v omarici. Stroj ima oznako CE. Samodejna funkcija zagon-ustavitev. Dimenzije: 3100x860x1800 mm (d x š x v) Teža: 3800 kg Možnosti za doplačilo: Naprava za uravnavanje temperature za pritiskalna orodja. Za ohranjanje temperature za optimalno kakovost briketov. Regulator temperature za črpalko, hladilno enoto, ventilator, tlačilni stikalo. Pred priključitev žično povezan - za delovanje je nujno potreben. Vključno z ustreznim krmiljenjem + 7.850 € neto. Giljotina ali drobilnik tablet, za obrezovanje briketov + 6.900 € neto. Potrebna je priključitev na komprimirani zrak! Silo za serijo MAP + 19.940 € neto. - Zaloznik nad strojem - Prostornina približno 6 m³, stabilna jeklena konstrukcija z izpustom mešalnega mehanizma in senzorjem nivoja. Transportni vod/hladilni segment (nominalna vrednost: 4x2m) 2 metra znaša 990 evrov neto. Montaža/zagon (nominalna vrednost približno 2-3 dni na kraju samem) po dejanski porabi, zaračunavanje je dodatno. Veljajo naslednji stavki: Servisni tehnik/mehatronik na montažno in potovalno uro: 129,00 € Dodatne ure: 25 % dodatka Na soboto in noč: 50 % dodatka Na nedeljo in praznik: 100 % dodatka Stroški na montažerja na dan: odvisno od države Na vsak avto, transportno vozilo in kilometer vožnje: 0,98 € / km Potni stroški in nočitev se zaračunavajo na podlagi dokazil ali z enotno tarifo. Testiranje z materialom posameznega naročnika: (po dogovoru, do največ 750 kg) – 1.970 € neto (enotna cena). Zahteve za surovi material: - Vsebnost vlage (atro) mora biti med najmanj 6 in največ 15 %. - Dolžina sekancev največ 18 mm. - Temperatura prostora: ogrevan prostor z najmanj +5 °C. - Material, ki se dovaja, mora biti brez kovin in mineralnih nečistoč. Škoda na pritiskalnih orodjih in/ali povečana obraba so lahko posledica.

Stanje: dober (rabljeno), Uporabljena, prenovljena strojna oprema Osnovni stroj, cena se začne pri 145.000 € neto *Dodatne možnosti so na voljo po doplačilu, glejte spodaj. Z enoletno garancijo *Še en stroj je na voljo takoj. Tehnične specifikacije: Proizvodna zmogljivost do največ 1200 kg/h, odvisno od materiala (npr. žagovina s specifično težo 180 kg/m³) Premer briketov 75 mm Vključno z 2 m dolgim tlačnim kanalom Moč glavnega motorja 45 kW Moč motorja za podajalni vijak 2 x 2,2 kW Moč motorja za kompresorski vijak 2 x 5,5 kW Moč motorja za distribucijski vijak 2,2 kW Moč motorja hidravlične črpalke 0,37 kW Skupna priključna moč 65 kW Krmilna plošča s prikazom v jasnem besedilu za delovne načine in prikaz izkoriščenosti glavnega pogona in podajalnih vijakov PLC krmiljenje Siemens S7/300 z merilnikom delovnih ur v nadzorni omarici Stroj ima oznako CE Avtomatska funkcija vklopa/izklopa stroja Dimenzije 3100 x 860 x 1800 mm (d x š x v) Teža 4500 kg Možnosti: Silo za serijo MAP (primerno samo za stiskalnico tipa MAP 1200) - Silo nad stiskalnico - Prostornina približno 6 m³, stabilna jeklena konstrukcija z mešalom za izpust materiala in senzorjem nivoja. 19.700 € neto plus DDV -Naprava za uravnavanje temperature za stiskalne orodja za ohranjanje temperature za optimalno kakovost briketov. Regulator temperature za črpalko, hladilno enoto, ventilator, tlačnik Predvidena je priključitev – nujno potrebna za delovanje Vključno s pripadajočim krmiljenjem 7.850 € neto -Giljotina za krajšanje briketov Potreben priključek za stisnjeni zrak 6.940 € neto plus DDV -Transportni trak / hladilni trak (nazivna vrednost: 4 x 2 m) 2 metra = 990 evrov neto Montaža / zagon (nazivna vrednost za stiskalnico približno 2-3 dni na lokaciji) cena se določi na podlagi porabe. Veljajo naslednji stavki: Servisni tehnik / mehatronik, cena na uro montaže in poti: 129,00 € Dodatno za nadurno delo: 25 % doplačilo Na saturno in nočno delo: 50 % doplačilo Na nedeljsko in praznično delo: 100 % doplačilo Dnevna tarifa za montažerja: odvisna od države Na kilometer vožnje z avtomobilom in kombijem: 0,98 € / km Hsdps E Dquefx Abnonr Stroški potovanja in nočitve se povrnejo na podlagi potrdila ali s pavšalno zaračunavanjem, stroške nosi naročnik. . Testiranje z materialom naročnika (po dogovoru, do največ 750 kg) - 1.970 € neto, pavšalna cena ---- Zahteve za surovi material: - Vsebnost vlage (atro) mora biti med najmanj 6 in največ 18 % - Dolžina opilkov največ 20 mm - Temperatura v prostoru za postavitev: kontroliran prostor z najmanj +5°C - Material za vnos ne sme vsebovati kovin in mineralnih nečistoč. Posledica so lahko poškodbe stiskalnih orodij in/ali povečana obraba.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Hnedpfx Ajb Ny Eyebnor Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Leto izdelave: 2026, stanje: novo, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA Hodpfx Abod N Dn Djnjnr - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. Hsdpewkpxksfx Abnenr With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2020, obratovalne ure: 100 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 300 kg, skupna dolžina: 1.330 mm, skupna širina: 840 mm, skupna višina: 1.870 mm, priključek za stisnjen zrak: 6 letvica, vrsta vhodnega toka: Klimatska naprava, Podajalnik pladnjev TL-6040 – dvotirni modul za nalaganje in razlaganje pladnjev za ekonomičen transport pladnjev (zabojčkov) za tiskana vezja. Prazni pladnji se vzamejo s transportnega vozička, avtomatsko pozicionirajo in pripravijo za opremljanje. Po opremljanju se pladnji samodejno razložijo na drugi transportni voziček. • Kompaktna zasnova Hnodpfx Aboxuqtbensr • Majhna talna površina • Modul za nalaganje in razlaganje • Transportni voziček • Standardna velikost pladnja: 400 x 600 mm • Trden jeklen varjen okvir • Š x D x V: 840 x 1.330 x 1.870 mm • Ročna delovna višina: 930–1.050 mm • Stisnjen zrak 0,6 MPa (6 bar), brez olja, filtriran, suh • Povprečna poraba približno 10 l/min • Temperatura okolja: +18°C do +30°C • Teža pribl. 300 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. Hnedpfxsyxccre Abnjr The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 900 mm, skupna širina: 1.550 mm, skupna višina: 1.900 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser za označevanje izdelkov – univerzalno uporabni laserski sistem za označevanje LAS 28 XLe podjetja Systemtechnik Hölzer GmbH je primeren za širok spekter različnih vrst označevanj. Z vgrajenim vlakenskim laserjem lahko označujete skoraj vse materiale, kot so jeklo, trda kovina, aluminij in plastika. Glede na zahteve lahko sistem opremite s 20, 30 ali 50-vatnim vlakenskim laserjem. Za trajno označevanje je uporaba laserja v številnih panogah nujna. Z zmogljivo lasersko programsko opremo lahko ustvarjate besedila, številke, 2D-kode, QR-kode in logotipe brez obsežnega znanja programiranja, in to le z nekaj kliki. Programska oprema samodejno šteje serijske in artikel številke po predhodni nastavitvi. Poleg tega lahko programska oprema prebere podatke (spreminjajoče se informacije, kot so številke risb, imena projektov itd.) iz obstoječih tabel in jih samodejno prenese v predhodno določena območja. Uporaba ročnega skenerja je prav tako možna. Standardna oprema vključuje vgrajen računalnik z operacijskim sistemom Windows in lasersko programsko opremo. Po želji lahko laserski model LAS 28 XLe opremite z rotacijsko osjo (3-čeljustna vpenjalna glava) za označevanje cilindričnih delov. Na voljo so tudi druge možnosti, kot so stranski podaljški za označevanje dolgih delov, premikalna os Z, sistemi za predale itd. Izdelano v Nemčiji Vlakenski laser 30 W, 20 W ali 50 W • Laserski razred 1 • Valovna dolžina 1064 nm • Velikost označevalnega polja 150 x 150 mm (po želji večje) • Programska oprema za označevanje EZCAD v nemščini/angleščini • po želji: rotacijska os (3-čeljustna vpenjalna glava) • po želji: digitalni sistem za merjenje višine • po želji: sesalni sistem (vključno z aktivnim ogljikom filtrom) • po želji: samodejni sistem za ostrenje – sistem za samodejno določanje razdalje žariščne točke • Pilotni laser (enostaven predogled, predogled konture) • Žariščni iskalnik (enostavna nastavitev žarišča) • Signalna luč za prikaz delovnega stanja • največja višina obdelovanca približno 300 mm • Električno nastavljiva os Z • Vgrajen računalnik z operacijskim sistemom Windows Hodpfeunh H Sjx Abnonr • IPS PCAP zaslon na dotik in opora za tipkovnico, nastavljiva po višini • Okvir iz aluminijastega profila • Hlajeno z zrakom • Izjemno velik notranji prostor • Širina vrat približno 700 mm / višina vrat (dovodni odprtini): 400 mm • Priključek 230 V • Mere: približno 900 x 800 x 1900 mm (D x Š x V) • Teža: približno 120 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment Hnjdpfxjyx Hgbs Abner • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection Hsdpfsxt Dk Rex Abnsnr • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.