Lange B 70 K-100 nakup rabljenega (81.227)

Stanje: rabljeno, Leto izdelave: 2018, Rabljen stroj Letnik izdelave: 2018 Posebnost: stroj za obdelavo materiala z debelino do 100 mm! Stanje: strojno preverjen s strani podjetja Lange Maschinenbau Oprema in tehnični podatki: - Strojna miza s 13 tekočimi valji za boljšo vodljivost obdelovanca - Sistem za dovajanje robov, sinhroniziran s pomikom traku - Debelina roba je nastavljiva s pomočjo digitalnega merilnika - Pnevmatsko ločevanje valjev z rezilom (za robove, ki se dajo rezati) - Tri pritiskalne valje - Pomik traku: - 0,25 kW - približno 1250 mm dolg - približno 6,0 m/min - 50 mm širok zobati jermen z debelo, obdelovancu prijazno gumijasto prevleko - Digitalni merilnik za nastavitev višine - Neposredna nanašanje lepila na obdelovanec: rezervoar za lepilo je neprezkušen, z zalogo lepila od spodaj in hitrim časom segrevanja po ustavitvi stroja - Agregat za obdelavo robov: - za sprednji in zadnji rob obdelovanca - avtomatsko tipanje na obdelovancu - pnevmatsko obdelava robov z rezilom za robove, ki se dajo rezati - Agregat za obdelavo robov s frezo - z vertikalnim tipanjem in horizontalnim vodenjem - ponovljiva nastavitev s pomočjo digitalnih merilnikov - 2 zmogljiva visokofrekvenčna motorja z močjo 0,4 kW - brezstopenjsko nastavljiva hitrost od 4000 do 18000 vrt/min - Freza Ø 70 mm, Z4, polmer 2 mm/15° - osrednji priključek za sesalnik Ø 100 mm - 2 sesalne kapice s cevjo Ø 60 mm - Avtomatska nastavitev višine zgornje freze s pomikom traku - Nosilna površina za obdelovanec, dolžina približno 1800 mm - Nosilna tirnica za obdelovanec, izvlečna za približno 300 mm - Vrteča se plošča za folijo, premer: 800 mm - Širina obdelovanca: min. približno 80 mm - Debelina obdelovanca: 10 ? 100 mm - Dolžina obdelovanca: min. približno 220 mm - Debelina roba: 0,4 ? 2,0 mm - Ločevanje valjev: maks. 1,0 x 55 mm, 2 x 45 mm - Moč grelnega elementa rezervoarja za lepilo: 2,7 kW - Čas segrevanja: približno 10 minut - Višina delovne površine: približno 880 mm - Električni priključek: 400 V, 50 Hz, 3-fazni + N - Skupna priključna moč: 3,8 kW - Pnevmatski priključek: 6 bar Dimenzije (brez plošče za folijo): približno 1800 x 700 x 1300 mm Teža: približno 260 kg Razpoložljivost: kratkoročno Gedpfx Aozk Nmreb Hobt Lokacija skladišča: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, Used machine Gbjdpfxszc Agke Ab Hot Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber pad. Digital counter for height adjustment - Direct adhesive application to the workpiece: leak-proof glue pot with glue supply from below and quick heat-up time after machine standstill - Flush trimming unit for workpiece front and rear edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°, central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total installed load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray Ø 800 - Net weight: approx. 260 kg Availability: Short notice Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2016, Rabljeni stroj Gedpfjynpc Nox Ab Hobt Leto izdelave: 2016 Stanje: Trenutno še v proizvodnji Oprema in tehnični podatki: Leplilni bazen Pritiskalna cona Krožna žaga Kombinirana rezkar r=2 mm, poravnavajoči rezkar Debelina obdelovanca 8 - 50 mm Minimalna širina obdelovanca ca. 75 mm Minimalna dolžina obdelovanca ca. 120 mm Debelina robu 0,4 - 3,0/5,0 mm Višina roba maks. = višina obdelovanca + 4 mm (2+2) Električni priključek 400V, 50 Hz , 3-fazni Skupna priključna moč 3,2 kW Hitrost pomika 8,0 m/min. Priključek za pnevmatiko 6 bar Neto teža 550 kg Stroj je možno dograditi z: Radijusno vlečno rezilo Ploščato vlečno rezilo Polirni agregat Lokacija: NRW Razpoložljivost: cca december 2025

Stanje: dober (rabljeno), Leto izdelave: 2019, Debelina robnega traku 0,4-3 mm / 5 mm Povezovalna enota Lepilna posoda Tlačna enota Gbodpfx Abjy El Eis Het Postaja za kapiranje Postaja za rezkanje Strgalo Površinsko strgalo Debelina obdelovanca 8-50 mm Minimalna širina obdelovanca 75 mm Minimalna dolžina obdelovanca 120 mm Skupna dolžina pribl. 2940 mm + izboklina skladiščnega krožnika Natančna oprema na zahtevo Podatki so prevzeti iz tehničnega lista, to je brez garancije

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Preformed edge banding machine with direct glue application to the edge material for thin and thick edges from 0.4 to 3 mm. Godpsd Sb Dtefx Ab Hsbt • Leak-proof gluepot with bottom glue reservoir and fast heat-up time after machine downtime. Automatic start of the application roller after approx. 8-10 min. • Pressure roller driven by gear motor, infinitely variable via potentiometer from 0-15 m/min. • Automatic edge feed and automatic end trimming for straight and shaped workpieces via foot switch. • Pneumatic roller separation unit max. 3 x 30 mm • Film plate D = 600 mm

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, hitrost pomika os X: 7 m/min, vrsta aktuacije: električni, skupna višina: 1.500 mm, skupna dolžina: 3.200 mm, skupna širina: 1.100 mm, skupna masa: 650 kg, Oprema: CE označba, dokumentacija / priročnik, – izdelano v Italiji – leto proizvodnje 2018 – predhodno frezanje Godszzzr Iepfx Ab Hjbt – tehnična dokumentacija, certifikat CE TEHNIČNE LASTNOSTI: – debelina robnega traku: 0,5 – 3 mm – debelina lesene podlage: 0,5 – 5 mm – višina elementa: 8 – 50 mm – minimalna dolžina obdelave: 160 mm – minimalna širina plošče: 110 mm – hitrost podajanja: 7 m/min – delovna temperatura: 190° – 220° – predhodno frezanje – valj za nanašanje lepila – giljotina za predhodno obrezovanje robnega traku – žage za končno obrezovanje robnega traku spredaj/zadaj – frezanje zgornji/spodnji rob – radialno brušenje – linearno brušenje – poliranje – zračni curek za vsak agregat – delovni tlak: 6 – 8 bar – višina mize od osnove: 900 mm – premer priključka: 2 x 60 mm in 2 x 80 mm – transportne dimenzije (dolžina/širina/višina): 320 / 90 / 150 cm – teža: ~ 650 kg

Stanje: rabljeno, Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Force Transducer TC-LC100KN.G02 (100 kN) Software testXpert III 1.6 serves as the control and evaluation software for ZwickRoell material testing machines. It enables standards-compliant test procedures, logs measured data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell's testing software (especially testXpert III) supports current Windows platforms, ensuring compatibility and intended use with Windows 11. Item Description: For sale is a high-quality material testing system, consisting of: - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) The system comes from a laboratory environment and was used for mechanical material testing at ambient and high temperatures. All devices are pre-owned, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened base version (W) Power supply: 400 V / 50–60 Hz / 3Ph+N+PE, current draw 9 A Test area: height 1,765 mm, width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Nominal test force (Fnom): 100 kN Drive: AC drive 4 kW (widened base version, W) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) per ISO 7500/1 Supply voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current draw: 9 A Power consumption: 5.0 kVA Load frame height: approx. 2.32 m Test space height: 1,765 mm Test space width: 1,030 mm Machine weight: approx. 1,820 kg Crosshead speed: 0.0005 – 1000 mm/min Gedpfezizlqox Ab Hobt Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Force Transducer: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Max. temperature: 1200°C 2 separately controllable heating zones Output: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Force Transducer TC-LC100KN.G02 Nominal force: 100 kN Protection class: IP67 Precise force measurement according to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) - Zwick/Roell Universal Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Force Transducer TC-LC100KN.G02 (100 kN) - Connection cables and mounting materials (if available) (Subject to modifications and errors in technical specifications and descriptions!) For further questions, we are happy to assist you by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2138, vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, ÖZM 1100 BLSD BOTTOM SEALING BAG MAKING MACHINE Machine length: 6600 mm Machine width: 1900 mm Machine height: 1750 mm Produced year: 2024 Capacity: 150 pcs/min Bag's length: 100 - 2000 mm Bag's width: 1100 mm max Film thickness: 0,007 - 0,200 mm Servo Motor (pulling roller motor): 5 kW Main motor (jaw motor): 1,5 kW Unwinder Motor: 0,75 kW Bobbin unwinder motor: 1,5 kW Hydraulic Bobbin Lifting Motor: 0,37 kW Border control motor: 0,25 kW Conveyor motor: 0,25 kW Upper jaw resistance: 3 kW Lower jaw resistance: 2,5 kW Slicing resistance: 1,1 kW Gbodozd S A Aepfx Ab Hst Current Type: 3 - 50 Hz Working Voltage: 380 Volt Air Pressure: 6 Bar Total Power: 19 kW

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with run-out function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece processing sequence, and integrated line control for contactless management of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free positions for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit chip removal: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Gedpfx Asw I U Drsb Hsbt Options: - Surcharge for radius scraper unit with blow-off device + extraction - Surcharge for flat scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with run-out function - Surcharge for diamond tooling, height = 65 mm for jointing unit - Riepe spray device (anti-stick) at jointing unit - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° bend + manual gate valve mounted on the machine, D=200mm Availability: short notice Location: Hochheim

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Compact and flexible, even in the smallest of spaces. Measuring just 2.13 m in length, this machine delivers a professional finish to your workpieces. Equipped with a 1.1 kW high-frequency motor jointing unit and a diamond-tipped spiral jointing cutter, a Teflon-coated glue pot, a pre-trimming unit, and an HF multi-function milling unit. It features two free slots for finish units, such as a surface scraping blade or polishing unit. Operation is user-friendly via a 3.5" color touchscreen. ► Control via 3.5-inch color touchscreen ► Jointing unit with 1.1 kW high-frequency motor and diamond-tipped spiral jointing cutter operating counter-rotating for clean and tear-free jointing of workpieces before edge banding ► Teflon-coated glue pot with automatic standby function ► Automatic edge feeding with roll dispenser D = 600 mm for edge material in rolls as well as fixed lengths from 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressing of the edge band ► HF multi-function milling unit – suitable for radius and flush milling on the longitudinal edge and for the front and rear workpiece edges, including vertical rounding of the edge ► 2 free slots for finish units such as a surface scraper or buffing unit ► Workpiece chain feed with rubberized chain pads and double roller top pressure ► Pressure beam with central adjustment and SIKO display Gbsdpforrzkljx Ab Hot ► Fixed workpiece support (optional extendable support for large workpieces) ► 400 mm infeed fence with support ► LED lighting inside the enclosure (optional) ► Processing of workpieces from 10 – 45 mm thick ► Feed speed 6.5 m / min ► Machine length: 2,130 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Stiskalnica za brikete Spänex SHB 100 R K1 Godpfxoy Dc Tus Ab Hobt Kapaciteta motorja: 100 kg/h Pretok: 0,9 m³/h Premer briketa: 70 mm Moč motorja: 7,5 kW Letnik: 2014 Cena: 10.500 € Boljše fotografije kmalu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 725 mm, premer struženja nad prečnim suportom: 590 mm, premer struženja: 376 mm, moč vretenovega motorja: 30 W, največja hitrost vretena: 2.800 obr/min, izvrtina vretena: 115 mm, potovalna razdalja osi X: 280 mm, pomik po osi Z: 830 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 1.112 Nm, prehod palice: 103 mm, Premer palice (maks.): 103 mm, poteza s peresom: 100 mm, premer tulec: 100 mm, hod vretena: 100 mm, premer nihanja nad prečnim premičnikom: 590 mm, nos vretena: A 2-11, premer nihanja nad prečno desko: 720 mm, sila podajanja os X: 9.465 N, podajalna sila osi Z: 17.379 N, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stroj je kot nov, uporabljen je bil samo za zagon in je kombiniran s Halter Universal BIG 70 LoadAssistant. Možna je tudi ločena kupnja. Godpoyud Uajfx Ab Hsbt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, številka stroja/vozila: 7771, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 300 mm, obratovalna hitrost: 75 mm/s, hitrost vzvratne vožnje: 75 mm/s, višina mize: 900 mm, globina grla: 1.000 mm, skupna širina: 3.100 mm, skupna masa: 8.900 kg, potovalna razdalja osi X: 1.000 mm, model krmilnika: EC20 - graficzne 2D, delovna širina: 3.000 mm, upogibna sila (maks.): 100 t, zadnji prislon: 1.000 mm, hitrost zadnjega prislona os R: 250 mm/s, Razdalja pomika zadnjega prislona, os R: 200 mm, pomik zadnjega naslona os Z: 1.000 mm, razdalja med stojali: 3.000 mm, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, nastavitev zadnjega prislona: CNC krmiljen, število osi: 4, vrsta aktuacije: električni, Oprema: CE označba, evropski sistem vpenjanja orodij, nujno zaustavitev, varnostna svetlobna zapora, Servo-električna upogibna stiskalnica SAFANDARLEY tip E-Brake 100-3100 NS (100T - 3060 mm) Gsdpeylt Ukofx Ab Hsbt Orodjni sistem AMADA Proizvajalec Nizozemska - Lochem Smo uradni zastopnik podjetja SafanDarley za Poljsko. - Servo-električni pogon - Tlak 100 T - Dolžina upogibanja 3060 mm - Hod 300 mm - CNC upravljanje po oseh Y1 / Y2 / X / R / Z1 / Z2 - Zadnji prislon krmiljen v 4 oseh CNC - X / R / Z1 / Z2 - Grafično 2D upravljanje – model EC20 - Programabilna svetlobna zavesa - Orodjni sistem AMADA - Orodjni sistem WILA – spodnja sponka, možne matrice 4V / 2V / 1V / tip T z osnovo 60 mm - Kompenzacija spodnje mize – »CROWNING«

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. Gsdpfx Abjl Rix Ee Hsbt • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 100-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a fixed-mounted water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. Gedpfx Abjwc Ri Is Hobt For safe operation, our safety cut-off system is included. This system starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. The pressure blasting unit is delivered fully assembled, operational, and space-saving in a mesh box. Only the compressed air supply needs to be connected and the unit filled with blasting media. Transport can be carried out conveniently using a forklift or pallet truck. For protective clothing, spare parts, etc., a lockable aluminum storage box is installed. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently installed - 1" water separator, permanently installed - SAPI safety cut-off system - Blasting media sieve - Cover - 10 m blasting hose ø 25x7 mm, fully assembled - Silicon carbide venturi long nozzle, available in 6 mm, 8 mm, or 10 mm diameter - RED 2 sandblasting helmet - Sandblasting overall (nylon/cotton) - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - SAF breathing air / activated carbon filter - Wear parts kit consisting of: - 100 tear-off visors for RED 2 - 10 inner lenses for RED 2 - 1 blasting hose coupling 25x7 mm nylon - 2 rubber seals for blasting hose coupling - 1 nozzle holder 25x7 mm - Mesh box with blasting hose holder - Lockable aluminum box Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Rigid 1" piping (internal and external) - Rubber-coated metal cone with rubber seal - Large handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 100 l - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh box dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight incl. all accessories: 260 kg

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 21.000 h, vpenjalna sila: 100 kN, delovna prostornina: 46 cm³, tlak vbrizgavanja: 2.400 letvica, skupna masa: 4.500 kg, premer polžastega transporterja: 22 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Gbjdpfjzz Aw Sox Ab Het

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. Godsf Tdwcopfx Ab Hjbt • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: novo, Leto izdelave: 2025, Machine neuve Année de fabrication : 2025 Compacte et flexible sur un espace très réduit. Sur seulement 2,13 m de longueur, les pièces reçoivent leur finition ici. Équipée d’un moteur haute fréquence de 1,1 kW, d’un groupe d'assemblage avec fraise spirale garnie de diamant, d’un module d'encollage avec revêtement Téflon, d’un groupe de pré-découpage et d’un module de fraisage multifonction HF. 2 emplacements libres pour unités de finition, comme par exemple une lame à tirer et une unité de polissage. Utilisation simple via écran tactile couleur 3,5''. Données techniques Longueur machine : 2 122 mm Épaisseur des pièces : 10–45 mm Largeur des pièces (min) : env. 120 mm Épaisseur des chants : 0,4 – 2,0 mm Hauteur des chants (max) : = hauteur pièce + 4 mm (2+2) Raccordement électrique : 400 V Puissance totale raccordée : 3,6 kW Avance : 6,5 m/min Connexion pneumatique : 6 bars Poids net : env. 490 kg Gsdpfx Ajy Eizzeb Hsbt Options : Unité lame à tirer Outils diamant hauteur = 45 mm Emplacement : Flörsheim Disponibilité : court terme

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish. Gjdsd R U Agspfx Ab Hobt

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. Gsdpol Rix Njfx Ab Hjbt • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D Gedpfx Abjziizys Hsbt • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 48.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: MillPlus, skupna masa: 10.500 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 17.800 h, dovod hladilne tekočine: 40 letvica, nos vretena: SK40, število mest v zalogovniku orodij: 60, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Tehnične podrobnosti Vreteno novo, 2026 5-osni simultani obdelovalni center! Gib X: 1.250 mm, Y: 710 mm, Z: 710 mm Površina mize: 1.500 x 800 mm Nosilnost mize: 800 kg Število vrtljajev: 12.000 vrt/min Gbjdozk E U Sopfx Ab Hjt Motor vretena: 15 / 10 kW Nosilec vretena: SK 40 Naprava za avtomatsko menjavo orodja: 60 pozicij PODROBNOSTI O STROJU Krmilni sistem: MILLPLUS iT HEIDENHAIN Dimenzije in teža Potreben prostor: približno 3,5 x 3,00 x 2,65 m Teža stroja: približno 10,5 t OPREMA Os B (-120 / +30) NC vrtljiva miza, integrirana v fiksno mizo Direkten merilni sistem 3D tipalo, infrardeče HEIDENHAIN TS 640 IKZ 40 bar, 600 l Pralna pištola Transportni sistem za odrezke Programska oprema 3D Quickset

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Rabljen 3-metrski stroj Safan E Brake Tip: E Brake 100 3100 TS1 Gbjdpjzz N R Eefx Ab Hst Kapaciteta: 3100 x 100 ton E Control, CNC upravljanje CNC upravljanje osi Y1, Y2, X, R, Z1 in Z2 Hidravlična zgornja sponka Wila New Standard Letnik izdelave: 2009 Nameščen nov računalnik

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces, flush trimming unit with VR function, HF milling unit, chain feed, double roller upper pressure, and extendable workpiece support rail. Suitable for ABS and PVC edge banding rolls, as well as fixed lengths from 0.4 to 2.0 mm and workpiece heights from 8 to 50 mm. Feed speed: 5.5 m/min • 2 free spaces for finish units • 5.6" color touch screen • Automatic edge feeding for roll material via rotatable reel table D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters guarantee clean and tear-free jointing of the workpieces before edge application. • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue burn-off if the machine remains switched on but is unused for extended periods). (Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change). • Pressure zone consisting of a powered pressure roller operating synchronously with the glue roller, and an adjustable pressure roller with spring tension, ensuring a strong joint between the edge material and the workpiece, adjustable via SIKO display. • Flush trimming unit for front and rear workpiece edges, including VR function (for vertical curves), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special cutters, suitable for radius and chamfer trimming, horizontal and vertical workpiece tracing, unit adjustment with digital counters for different edge types, height adjustment of the upper unit via upper pressure. • 5.6" color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is idle, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Riepe spray systems for anti-adhesive or cleaning agents available as option Optional finishing units (2 free slots): • Radius scraper unit: Slight cutting action removes any milling marks from radius cutters, ensuring a perfect finish. Fine adjustment via digital counter. Gsdpfx Ajip Uzpsb Hjbt • Surface scraper unit: Light cutting action removes any glue residues from the glue line on the workpiece surface. • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, provide a superb finish for ABS and PVC edge materials.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Lepo ohranjen rabljeni E Brake znamke Safan Tip E Brake 100 3100 Godozbhk Eopfx Ab Hebt Kapaciteta 3100 x 100 ton Osi Y1, Y2, X, R, Z1 in Z2 CNC krmiljene Ročno bombiranje Hidravlično zgornje vpenjanje Wila NS