Johann Frischling Maschinenbau H40 nakup rabljenega (1.068)

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: H 40, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.200 mm, skupna širina: 1.100 mm, skupna višina: 1.800 mm, temperatura: 120 °C, Pritisna stiskalnica za furnir 2200 x 1100 mm z ogrevanjem, pritisk prek ročne črpalke. Kdedpfeyuva Ujx Ankel

Stanje: rabljeno, Leto izdelave: 1993, Avtomatski paletirni stroj PA 1800 podjetja Maschinenbau GmbH za nakladanje in razkladanje zabojev piva na Euro palete, vključno z zalogovnikom palet. Stroj (dodatno): paletizacija in depaletizacija Kapaciteta: 150 palet/uro Kjdpfew Uc A Ajx Ankjdl Osnovna konstrukcija: stroj za ovijanje s trakom: Athena Roboband 2VH; Leto izdelave: 2004; Kapaciteta: 150 palet/uro; Dimenzije palet: 1,2 m x 0,8 m; Logopac Logomatic 915/T; Leto izdelave: Oprema: nakladalec in razkladalec palet: Nagema PA; Leto izdelave: 1993; Zmogljivost: 1700 zabojev/uro; Dimenzije: dolžina: 3 m, širina: 2 m, višina: 3 m Teža: 1,6 tone

Stanje: rabljeno, Leto izdelave: 2019, Izoliran, stoječ nerjavni rezervoar s grelnim plaščem (vključno z regulacijo temperature) in tlačno črpalko (3 m3/h pri 3 bar). Rezervoar je dodatno opremljen z iztočno cevjo, pokazateljem nivoja in manometrom. Stroj (dodatno): stoječ, izoliran, ogrevan nerjavni rezervoar Bruto prostornina: 2000 l Višina: 2100 mm Material: nerjavno jeklo 1.4404 (AISI 316L) z izolacijskim plaščem iz 1.4301 (AISI 304) Osnovna konstrukcija: stoji na 4 nogah Kodpfxexwy Aqo Ankedl Oprema: izolacija (debelina 50 mm); grelni plašč; regulacija temperature; tlačna črpalka (Grundfos); iztočna cev; cevni pokazatelj nivoja; manometer.

Stanje: rabljeno, Leto izdelave: 2019, Cylindroconical fermentation and storage tanks, standing on 4 legs, with a maximum operating pressure of 2.5 bar. Each tank is equipped with peripheral and conical cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunging device, hose level indicator, sample valve, and temperature control. Machine (additional): upright, coolable, insulated stainless steel pressure tanks with temperature control Kdedpfx Anexf D Iaeksl Gross volume: 2500 l Operating pressure: 2.5 bar Operating temperature: 50 °C Material: Stainless steel 1.4301 (AISI 304) Location / Position: standing on 4 legs Basic construction: cylindroconical Features: cooling jackets, insulation (50 mm chloride-free PU foam), cleaning line, 2 outlet lines with manual valves, pressure gauge, bunging device, hose level indicator, temperature control, sample valve

Stanje: rabljeno, Complete brewery installation, comprising: - Grist mill (ROBIX) with platform scale - 2-vessel brewhouse with a cast wort capacity of 10 hl. One vessel serves as mash/wort kettle with bottom heating and internal boiler. The second vessel functions as lauter tun/whirlpool. Manufactured by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration unit (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Manufactured by Joh. Albrecht Brautechnik. - 5 cylindrical-conical storage tanks, each with a capacity of 27 hl. Manufactured by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as pressure boosting pumps, powered by compressed air - Beer pump (SAWA) for transferring 5 m³/h - Cleaning lance for dispense tanks - CO2 warning device (Beviclean) - Additional accessories including pressure reducers, dispensing heads, etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), including air compressor with refrigeration dryer - Water treatment system (PENTAIR) - Cooling system with compressor, buffer tank, expansion vessel, coolant pump - Piping Kodoxwyzajpfx Ankodl Machine note: 10 hl brewhouse with storage tanks and utility equipment, year of manufacture 2018 - 2022 Cast wort capacity: 1,000 l Material: Stainless steel brewhouse Equipment: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindrical-conical storage tank, pressure boosting pump, beer pump, CO2 warning device, cleaning lance, pressure reducers, dispensing heads, hoses, cooling system, compressed air system, electric steam generator, water treatment, piping

Stanje: rabljeno, Leto izdelave: 1974, Dolžina 450 mm Širina 250 mm Višina 1.250 mm Natančnost +/- 1 ° Razdalja med navojnimi luknjami H: 130 mm Kdsdpeydqnxsfx Ankel Razdalja med navojnimi luknjami V: 150 mm Razdalja med navojnimi luknjami H: 70 mm Razdalja med navojnimi luknjami V: 200 mm JOHANN FISCHER – Merilni kotnik

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: DC18330, skupna širina: 2.000 mm, skupna dolžina: 2.000 mm, Ponujamo rabljeno merilno ploščo Johann Fischer Aschaffenburg tip IDT009: merilna plošča, trasirna plošča, tusirna plošča, letnik izdelave neznan. Proizvajalec: Johann Fischer Aschaffenburg Izvor: Izdelano v Nemčiji Tip: merilna plošča Številka artikla: IDT009 DC-številka: DC 18330 Inventarna številka: QS-00355 Datum pregleda: 23.3.03 Kodpjy H Dgbofx Ankodl Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Johann Fischer Aschaffenburg / Merilna plošča / Merilna miza s spodnjo omarico - Merilna plošča s podnožjem (premična) - Velikost mize: 1,5 x 0,6 metra - Natančnost po DIN 876 /1 - Premična na spodnji omarici s predali Kjdpfx Ansy Shaijkjdl Mere: D x Š x V 1,5 x 0,6 x 0,9 metra / 550 kg Pridržujemo si pravico do napak in vnosa podatkov.

Stanje: dober (rabljeno), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: Kdedpfxoy R Efae Ankol - Schröder MHSU shear - Cutting capacity: see type plate, up to 3mm steel – significantly more with aluminum - Usable length: just over 2m - Manual backgauge approx. 750 mm / 1000 mm, with digital readout - Side/winkel gauge - Backgauge extension up to 2m - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal operation - Weight approx. 1.3 t We also have other machines available, such as Schechtl MAX 200 - 2.5mm, Schechtl MA 200 2mm and HA, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears from RAS, etc. The current net list price is around €25,000. You will receive an invoice with VAT shown separately; VAT is included in the invoice total. Shipping can be arranged upon request, forklift available on site. Free loading as shown in the pictures. Inspection and testing possible by telephone appointment. Payment in cash upon collection; if you need anything else, please give me a quick call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway). Article number: Schröder MHSU 2m 3mm 260511

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm Kodpewka S Ijfx Ankodl - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2025, Plasma cutting system for tubes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After the workpiece is manually loaded, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured with light curtain Kedpfsgu Nmhex Ankodl - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power consumption (machine): 400V 3P 2KW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The pictures show an older machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via the CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be accessed easily via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - Suitable for round pipes up to max. OD = 150 mm - Suitable for square pipes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle - Industrial PC control with 12" touch display - Data import via USB and LAN Kedpfx Asg Dvdcsnkedl - Power supply for machine: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The pictures show an older, larger machine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB Kdsdpfx Aotr U Hlenkol → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° Kjdpfottah Rox Ankodl → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Plazmový řezací systém pro trubky a profily Stroje pro plazmové řezání trubek a profilů. Řezací kontura je definována a vytvořena pomocí CAM softwaru. Vytvořený CNC kód je následně přenesen do stroje přes USB nebo síť. Program lze jednoduše zvolit přes 12" dotykový displej. Po ručním vložení obrobku se spustí automatický řezací proces. - Délka trubky: max. 6000 mm Kodex Ebzqepfx Ankodl - Pro kruhové trubky do max. vnějšího průměru 150 mm - Pro čtyřhranné trubky do max. 101,6 x 101,6 mm (4"x4") - Maximální hmotnost trubky 150 kg - Čtyřčelisťové sklíčidlo - Možnost bočního nakládání, zajištěno světelnou závorou - Plně automatický řezací proces - Průmyslové PC řízení s 12" dotykovým displejem - Import dat přes USB a LAN - Připojení: 400V 3fázově, 2 kW - Rozměry: 690x100x180 cm - Hmotnost: cca 800 kg Vyrobeno v Německu Obrázky ukazují obdobný stroj.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Nudim prebojni trak s tekstilno ojačitvijo za hidravlične prebojne stroje in avtomate, debeline cca 7–9 mm, v znanih kakovostih BP-50, BP-55 in BP-455, razrezano na dolžino in pripravljeno s stopničastim ali klinastim spojem, vključno z dvokomponentnim lepilom. Kdsdewduymspfx Ankjl

Stanje: pripravljen za uporabo (rabljen), Johann Fischer platine de mesure en granit 2000mm x 2000mm Plateau de mesure Table granitée Dimensions : 2000mm x 2000mm x 300mm (L x l x H) Hauteur avec pieds : env. 860mm Kedpfsy Iapujx Ankedl Poids net : env. 3500 kg Précision : DIN 876/1 Classe : 1 Planéité : Éc. effective 0,0155 mm ; Éc. admissible 0,030 mm Température de référence : +20 °C Vous pouvez volontiers venir voir la machine sur place. Nous pouvons également organiser un transport économique pour vous ! Vous recevrez une facture en bonne et due forme. Pour les clients étrangers, une facture nette peut être établie. Condition préalable : numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Visitez notre boutique et découvrez également nos autres offres. Les noms de sociétés et marques mentionnés appartiennent à leurs propriétaires respectifs et servent uniquement à l’identification et à la description des produits. Des écarts par rapport aux données techniques ou des erreurs de description peuvent se produire et restent réservés.

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, skupna višina: 1.800 mm, skupna dolžina: 600 mm, skupna širina: 780 mm, skupna masa: 280 kg, višina mize: 930 mm, širina obdelovanca (maks.): 390 mm, višina obdelovanca (maks.): 210 mm, moč vretenovega motorja: 750 W, dolžina mize: 520 mm, širina mize: 470 mm, premer obdelovanca (maks.): 230 mm, Oprema: dokumentacija / priročnik, We offer this ready-to-use Bauer Maschinenbau HS 300 ZA vertical machining center, year of manufacture unknown. For sale is a Bauer automatic band saw HS 300 ZA (400 V). Used, well-maintained, and ideal for workshops, production, or material cutting. Technical Specifications (400 V) Voltage: 400 V Saw motor: 0.75 kW Weight: approx. 280 kg Dimensions Length: 600 mm Width: 780 mm Height: 1800 mm Cutting Area Cutting height (H): 210 mm Cutting width (B): 390 mm Throat (A): 230 mm Saw Band Saw band wheels: Ø 400 mm (tread with cork belt) Saw band length: 3000 mm Saw band width: 3–20 mm Table Table size: 520 × 470 mm Table height: 930 mm Swivel range: 10° left / 30° right Saw band guide: Slide or roller guides Documents / Identification EC Declaration of Conformity available (CE) Year of manufacture: 2004 Machine No.: 04-38012 Machine type (according to declaration): 4001 Price negotiable, net plus VAT. Location / Collection 93073 Neutraubling Collection only – loading can be organised by arrangement. Inspection possible. Mobile: +4916097215567 If you have any questions or need further information, feel free to send us a message or give us a call. Kedpey Exwrefx Ankedl

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, It is important to note that a total of two welding machines and two CNC corner cleaning machines are available, resulting in two complete production lines. The machines are operational and still in daily use. CE conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Power connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components: - 4 welding heads Kdodpfx Aeyyavrenksl - Linear motion system - Profile clamping units - Welding plate system - Pneumatic pressing units - Electronic temperature control - Central control unit - Safety light curtain Operation: Profile clamping – inserting the heated welding plate – PVC melting – generating welding pressure – welding cooling – frame removal The system operates semi-automatically/automatically. Included: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Control panel and industrial PC Control system: Industrial PC control Safety system: - Light curtain - Emergency stop button - Safety covers - CE conformity Still under power in Hungary, the system can be dismantled and delivered around June.

Leto izdelave: 2025, obratovalne ure: 1.050 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Alzinger Lepton 5100 – Solution for the Bio-Waste Ordinance (BioAbfV) Ideal for biowaste separation: Easily comply with the statutory 1% contamination limit! As of May 2025, biowaste may only be processed if the impurity content is below 1.0 wt-%. Our Lepton 5100 is designed precisely for this requirement. Advantages of the Lepton 5100: Separation instead of shredding Gentle bag opening: Waste bags are reliably opened without being shredded. A pre-shredder (slow-speed shredder) is not required! Maximum film size: Films remain largely intact and are efficiently removed during the first screening step before being fragmented during composting (by turning, heat, and UV exposure). Optimum product purity: Prevents microplastics in the process and ensures superior final product quality. Economic benefits: Legal compliance: Reliably falls below the 1% limit of BioAbfV. Process optimization: Reduced effort for downstream cleaning. Cost efficiency: Significant savings on diesel and wear costs, as a pre-shredder is not required. Integrated air separator: No need for additional bulky machines. Saves space and maintenance costs. Process innovation (flexibly configurable): Biowaste processing (2-fraction): Reversible mid-size grain conveyor combines medium and fine fractions homogenously. Result: Clean target fraction for digestion/composting plus oversize with films/impurities. Compost refinement (3-fraction): Separation into premium compost, structural material, and energy wood. Ballistic effect removes stones, glass, and hard plastics via stone conveyor. Integrated air separator eliminates final film residues. Current application: Successful biowaste preparation for wet digestion. The machine delivers a homogeneous, contaminant-free fraction for the digester, preventing floating or sinking layers. Inspection & demonstration: On-site demonstration available at our partner facility in the Kelheim district. Process discussions possible directly with plant operators. Technical data: Model: Lepton 5100 | Year: 2025 | Approx. 1,050 hours Location: D-84069 Schierling | Availability: Immediate Screen decks: Deck 1 (52mm), Deck 2 (43mm) Equipment: Variable dosing roller, volume measurement, wind sifter preparation, compressor, LED package, radio remote control. Drive: Diesel-electric (Perkins 58kW, without AdBlue) + option for external power supply (400V 63A). Kdodpfxoy Elwfj Ankel Transport dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). Screen materials: Compost, green waste, biomass, wood, waste, RDF. Condition: Very good, fully operational, machine will be fully reconditioned in our workshop prior to sale.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, XXL-Center RAS 75.06 - Splošni tehnični podatki v mm: Dolžina upogibanja: 6400 mm Maks. debelina pločevine (400N/mm2): 1,5 mm Maks. debelina pločevine (750N/mm2): 1,0 mm Maks. debelina pločevine (200N/mm2): 2,0 mm Območje pomika prijemal: 10 – 750 mm Prosti prostor pred čeljustmi do: 300 ° Izvlečne vstavne mize: da Prijemala: da Programiranje: avtomatsko preko Bendex Dimenzije stroja vključno z varnostno ograjo pribl.: 9400 x 3000 Teža: 12,5 ton - Podatki glede stroja: Pogonski motor; 400V, 50/60 Hz, 3-fazni Kodpfx Aox Hf Tvjnkedl Leto izdelave: 2010 Stanje: Popolnoma obnovljen - Slike so primeri -

Stanje: novo, Leto izdelave: 2025, Machine neuve Année de fabrication : 2025 Compacte et flexible sur un espace très réduit. Sur seulement 2,13 m de longueur, les pièces reçoivent leur finition ici. Équipée d’un moteur haute fréquence de 1,1 kW, d’un groupe d'assemblage avec fraise spirale garnie de diamant, d’un module d'encollage avec revêtement Téflon, d’un groupe de pré-découpage et d’un module de fraisage multifonction HF. 2 emplacements libres pour unités de finition, comme par exemple une lame à tirer et une unité de polissage. Utilisation simple via écran tactile couleur 3,5''. Données techniques Longueur machine : 2 122 mm Épaisseur des pièces : 10–45 mm Largeur des pièces (min) : env. 120 mm Épaisseur des chants : 0,4 – 2,0 mm Hauteur des chants (max) : = hauteur pièce + 4 mm (2+2) Raccordement électrique : 400 V Puissance totale raccordée : 3,6 kW Avance : 6,5 m/min Kdodpfx Aey Eizzjnksl Connexion pneumatique : 6 bars Poids net : env. 490 kg Options : Unité lame à tirer Outils diamant hauteur = 45 mm Emplacement : Flörsheim Disponibilité : court terme

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Zmogljiv stroj za zlaganje, znamke TC Maschinenbau. Sestavljen iz: razklopnika, usmerjevalnega valjčnega proga, oblikovanja plasti, prijemala, voznih vilic, dvižne ploščadi ter skladišč za letve. Linija je demontirana, obnovljena in deloma sestavljena v naši delavnici za ogled. Dolžine od 2,5 do 5,0 m. Kdedpfx Aoxnyt Ronkjl

Stanje: dober (rabljeno), Leto izdelave: 2019, Debelina robnega traku 0,4-3 mm / 5 mm Povezovalna enota Lepilna posoda Kdedpfoy El Eiox Anksl Tlačna enota Postaja za kapiranje Postaja za rezkanje Strgalo Površinsko strgalo Debelina obdelovanca 8-50 mm Minimalna širina obdelovanca 75 mm Minimalna dolžina obdelovanca 120 mm Skupna dolžina pribl. 2940 mm + izboklina skladiščnega krožnika Natančna oprema na zahtevo Podatki so prevzeti iz tehničnega lista, to je brez garancije

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 28 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2380029, skupna višina: 2.600 mm, skupna širina: 1.500 mm, skupna dolžina: 3.410 mm, skupna masa: 4.200 kg, premer rotorja: 330 mm, vrsta vhodnega toka: Klimatska naprava, dolžina rotorja: 800 mm, moč: 30 kW (40,79 KM), Function: Kodoyw N Acepfx Ankedl The input material is drawn in by two slow-running, counter-rotating shafts (resulting in low dust and noise emissions), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. Should the machine become overloaded or foreign objects enter the cutting mechanism, the control system reverses operation. The precise cutting gap of the cutter discs ensures energy-efficient shredding of the material. The mounted clearing comb prevents wrapping and uplift of the material being shredded. The width of the blades and the number of cutting edges determine the output size of the shredded material. Applications: This robust and heavy-duty machine, designed for maximum durability, enables the cost-effective shredding of not only special waste, metal chips, electronic scrap, and steel drums, but also various containers filled with liquids. All types of industrial waste, steel and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal chips Food, kitchen waste, biogenic waste, wood Glass, plastics, various liquid-filled containers, etc.