Randek nakup rabljenega (11)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, RANDEK forgó keresztvágó fűrész Gksdpsvryhgjfx Adkea

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The Randek JS400C end-trimming saw is designed to create cut-outs at the ends of timber pieces, for example, to accommodate a tie beam in vertically oriented studs. The machine pneumatically clamps the timber and performs two cuts with its two 400 mm diameter saw blades. The maximum cutting length is 380 mm, and the cutting depth can be set up to a maximum of 115 mm. Operation is quick and easy via foot pedal. Function description The timber section to be notched, e.g. a stud, is pushed into the covered saw slot up to the set stop. Any protruding end is supported on a roller stand (not included). Pneumatic clamping and the sawing cycle are activated via foot pedal. Technical description • Notch depth: 30–115 mm • Notch length: 10–380 mm • Timber thickness: 30–70 mm • Electrical connection: 3 x 400 V, 50 Hz, 25 A • Compressed air: 0.5–0.8 MPa (5–8 bar) • Saw blades: Carbide-tipped, 400/30-3.5/2.5/40 Safety The saw is well guarded by a cover plate to prevent accidental contact. When the cover is opened, power is automatically cut off, significantly reducing the risk of injury. Advantages • Enables effective and precise notching/cutting Gkjdsd Arwhjpfx Adkoa • Flexible and easy to set up • Simple to operate • Adjustable working height and foot pedal operation ensure ergonomic working conditions for the operator

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Delovna miza s stiskalno napravo in napravo za postavljanje Godpfxjx Tdtne Adkoka

Stanje: rabljeno, Leto izdelave: 2015, Wall line, izdelana za proizvodnjo sten za modularno proizvodnjo. Uporabljena pri švedskem proizvajalcu med letoma 2015 in 2021. OPOMBA: Prodaja se v obstoječem stanju. Dolžina postaje: 7000 mm Širina postaje: 2700 mm Postaja št. 1: Okvirna postaja CAD/CAM (vključuje dve pribijalni orodji) Postaja št. 2: Delovna miza Postaja št. 3: Polavtomatski pribijalni most (vključuje dve pribijalni orodji) Postaja št. 4: Delovna miza - dvižna miza Postaja št. 5: Multifunkcijski portal CAD/CAM (vključuje štiri vijačna orodja in rezkalno enoto) Gjdpfx Aexv Arxjdkjka Postaja št. 6: Delovna postaja - sprejemna miza - premakljiva bočno Postaja št. 7: Delovna postaja - prenos pod kotom Postaja št. 8: Delovna postaja - dvižna miza Postaja št. 9: Delovna postaja - prenos pod kotom Postaja št. 10: Delovna postaja - dvižna miza

Stanje: novo, Leto izdelave: 2027, ZEROLABOR ROBOTIC SYSTEM for Timber Frame Construction The Randek ZEROLABOR robotic system is a production cell in which various work processes are performed fully automatically by robots. The system is flexible and can be configured to customer specifications. The robotic cell can be integrated into existing production lines or operate as a standalone unit. The system enables the nearly fully automated production of walls, floors, and roofs in timber frame construction. Automated Processes: - Panel handling: Panels are removed from different stacks using vacuum lifters and placed onto the timber frame construction according to the CAD file. The system is flexible and can handle various panel sizes. - Fastening of panels using screws, staples, and/or nails. - Creation of recesses for electrical installations, windows, etc. - The system can process 1, 2, or 3 panel types. - Component marking with inkjet. - Gluing. - Waste handling: plasterboard waste and OSB waste are, for example, placed at defined locations or, if necessary, directly into the waste container. - Effective dust extraction. Godpjduub Usfx Adkska - Alignment of the component with the worktable. - Positioning of studs prior to nailing; precise placement of nails/staples into the studs.

Stanje: rabljeno, Leto izdelave: 2010, Die Lösung wurde für die Produktion von vorgefertigten Außenwandpaneelen für Haushersteller entwickelt. Das System besteht aus drei Hauptkomponenten: einer schienengeführten Nagelbrücke und zwei Arbeitstischen. Nagelbrücke: Godsykqxdjpfx Adkjka Die Nagelbrücke ist für das automatisierte Nageln von Paneelen mit vier Nagelpistolen konzipiert, die jeweils mit der gegenüberliegenden Seite verbunden sind. Das System umfasst vier Nagelaggregate, die das Nageln gemäß vordefinierten Nagelbildern an den jeweiligen Arbeitstischen automatisch durchführen. Das Nagelportal ist auf einem am Betonboden befestigten Schienensystem installiert, das es erlaubt, das Brückensystem bedarfsgerecht zwischen beiden Arbeitstischen zu bewegen. Das System ist mit Lichtschranken für Positionierungs- und Sicherheitskontrolle ausgestattet. Funktion: • Der schienengeführte Rahmen wird in einer neutralen Ladeposition zwischen den beiden Arbeitstischen positioniert. • Der Nagelvorgang wird von einem der beiden Arbeitstische aus gestartet. • Das gewählte Nagelbild wird automatisch ausgeführt. • Das Nagelportal wird aktiviert und führt den Nagelvorgang entsprechend dem gewählten Muster aus. Arbeitstische: Die Arbeitstische sind mit Auflagennuten zur Positionierung der Holzständer ausgeführt. Diese Nuten sind über Schiebemechanismen verstellbar und ermöglichen so die Anpassung an unterschiedliche Paneeltypen und Konfigurationen. Funktion: • Die Außenkanten des Tisches werden per Handsteuerung an das Paneel herangeführt. • Die ausgewählten Latten werden manuell positioniert, um die genaue Platzierung des Paneels zu unterstützen. • Der Bediener positioniert die zu montierenden Bauteile in die entsprechenden Nuten und gegen die Latten. • Das brückengeführte Nagelsystem wird aktiviert und führt das Nageln gemäß dem gewählten Muster aus.

Stanje: novo, Randek SPL728 Cut-Off Saw Computer-controlled, rotating, with LAN (Ethernet) connection for downloading or storing saw jobs (text file in ASCII format). The number of programs that can be stored is limited only by the size of the hard drive. Thanks to the graphical touchscreen (HMI), the operator can monitor all details directly on the screen or enter saw jobs manually. This minimizes disruptions in production flow. Saw blade: - Carbide-tipped, low-noise - 700 mm diameter / 116 teeth - 360° horizontal swivel - 90° to 28° tilting - 250 mm plunge depth Motor power: 7.5 kW. Automatically closing and locking safety guard made of plastic. Infeed table, available in lengths of 4.0 / 5.8 / 8.2 / 10.6 m Powered infeed roller, type IRO4-120. Transport rollers: 76 mm diameter, 400 mm roller length, 500 mm center-to-center spacing. Rear fence: 120 mm. 2 pneumatic hold-down devices. Feed direction: optional from left or right. Outfeed table, available in lengths of 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m Computer-controlled roller conveyor type LX. Guide roller for outfeed: rollers 76 mm diameter, 400 mm long. Rear stop 120 mm. 2 computer-controlled longitudinal stops, belt-driven. Stop 1 - designed for cut lengths down to 50 mm. Stop 2 - traverses the full length of the outfeed table. Positioning of longitudinal stops and adjustment of cutting angles are computer-controlled independently. Maximum travel speed of longitudinal stops: 1 m/s. Wood infeed: 1 unit Return devices: 2 units Gjdpjfg Tatjfx Adkska Feed direction: configurable from left or right.

Stanje: novo, Leto izdelave: 2026, Tilting Table Combination for Timber Frame Construction – BS20 The Randek Tilting Table Combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable structures with timber or metal frames. The tables can be operated as standalone units or integrated into production lines. Perfectly square building components of high quality are ensured by the clamping function. The lifting and tilting of the components are performed through a controlled, manually operated process. This tilting table combination is designed specifically for the manufacture of prefabricated houses, enabling high productivity. The adjustable assembly height for building elements ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination was developed to efficiently perform the following processes: frame assembly, insertion of insulation material, stapling of plastic or paper films, and application and nailing of wall cladding. • Production of square building components. The pneumatic clamping mechanism along the long side of the master table presses the frame assembly into a square, high-quality, precise building component • Automatic tilting of the building component, manually controlled • Automatic raising of the building component Technical Description: • Lengths available: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Adjustable width between 2250 – 3100 mm; width is set manually and easily • The master table can be hydraulically raised up to 92°, the slave table up to 86° • Pneumatically activated pressing function on the long side of the master table • Stops 160 mm high • Both tables are, as far as technically feasible, covered with plywood. The plywood sheathing allows sub-components and beams to be placed directly on the table • Tabletops supported by a robust steel frame • Optimal working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly. Installation is straightforward Gjdpfxj Nn Hyj Adkeka Safety: • Emergency stop switch on control panel • CE conformity Advantages: • Perfectly square building elements through the pressing function • Controlled automatic raising and tilting of the components • Ideal working height • Flexible width adjustment

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Randekov sistem za izdelavo nosilcev NT proizvaja strešne nosilce z uporabo C-stiskalnih glav, premičnih magnetnih pritrdilnih elementov na jeklenih tleh in enega izmed naših številnih žerjavnih sistemov. Žerjavni sistemi: - Stenski žerjav - Stebrni žerjav - Motorizirana mostna dvigalka Gkjdpfexwkuqsx Adkja - Protiutežni žerjav Stiskalna glava: 23T, 27T, 35T, 50T Laserski sistem na voljo kot opcija.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Proizvodna linija / miza za stenske in strešne panele / elemente. Od nove skoraj ni bila uporabljena. Še vedno je kot nova in deluje brezhibno. 1 kos Randek BS10u z nagibom 80 stopinj in 2 kosa miz BS05. Pnevmatska pritrditev / primež ter pnevmatsko dvižni valji za lažje premikanje stene. Dolžina: 9 m vsak Dimenzije stene: od 225x900 cm do 365x900 cm Gsdpfexq Rrcox Adkska Nakupna cena leta 2022: 850.000 SEK = približno 80.000 EUR Cena je brez DDV.

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition Gedpjh Ayyqjfx Adkoka The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.