Ima Novimat Compact R3 nakup rabljenega (15.159)

Stanje: rabljeno, številka stroja/vozila: 008662, Pozicija 1: Enostranska kantna strojna linija IMA-NOVIMAT CONTOUR I/G80/790/R3 Pozicija 2: Sistem za vračanje plošč IMA-NOVIMAT CONTOUR I/G80/790/R3 Ibjdpfxszmmtne Aquoc

Stanje: rabljeno, številka stroja/vozila: 008660, Vrsta obdelanega roba: tanek rob, debeel rob Lepilni sistem: EVA Obdelava s frezo: da Iodpfozmmt Uex Aquobc Multifunkcijska enota: da Enota za obdelavo z zgornjo frezo: da Maks. hitrost premika: 30 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 9 kos

Stanje: rabljeno, številka stroja/vozila: 005657, Vrsta obdelanega roba: tanek rob, močan rob Lepilni sistem: PUR Obdelava spojev s frezo: da Ijdpfx Aezz Ipaequebc Multifunkcijska enota: da Enota za obdelavo z nadfrézo: da Maks. hitrost podajanja: 30 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 13 kos

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This IMA NOVIMAT I /G80/390/R3 edge banding machine was manufactured in 2013. It is equipped with two 4.5 kW motors operating at 150 Hz, enabling speeds of up to 9,000 rpm. With an edge height of 14 to 65 mm and a roll diameter of up to 850 mm, it is ideal for precise edge banding applications. Take advantage of this opportunity to purchase the IMA NOVIMAT I /G80/390/R3 edge banding machine. Contact us for further information about this machine. Additional information: • Motor power: 2 x 4.5 kW, 150 Hz • Motor speed: 9,000 rpm • Power supply: 230 V • Heating capacity: 6 x 500 watts • Adjustment range: Vertical approx. 17 mm, horizontal approx. 30 mm • Stroke: max. 8 mm • Roll diameter: max. 850 mm • Edge height: 14 - 65 mm • Workpiece overhang: min. 30 mm + edge thickness, max. 80 mm including edge thickness • Workpiece length: min. 130 mm • Workpiece gap: min. 300 mm • Workpiece distance: min. 990 mm • Workpiece thickness: min. 8 mm, min. 12 mm with tracing wheel, max. 80 mm • Single tracing workpiece overhang: min. 30 mm • Double tracing system workpiece overhang: min. 38 mm for max. 4 profiles, max. 50 mm • Cutterhead diameter: 125 mm • Motor shaft: 30 x 68 mm diameter • Internal thread: M16, depending on motor, left or right • Cutting cross-section motor power: 0.20 kW, 200 Hz, 400 V, 12,000 rpm for max. 195 mm², option: 0.66 kW, expandable up to max. 1,100 mm² • Tool diameter: 160 mm / 48 teeth • Swivel range: 0 and 25 degrees Ibodjzxzrvepfx Aqujc • Workpiece feed speed: max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge protrusion: upper edge, max. 3 mm; lower edge, max. 2 mm for straight edges • Edge material: max. 4 mm for wood and plastic; aluminium, max. 3 mm

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: Ibsdpfokt Uuaox Aquoc M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Edge Thickness in Strips (min/max) mm: 1 Panel Thickness (min/max) mm: 8 - 60 Control Unit: ICOS Open Compact Feed Speed m/min (adjustable): 6 - 30 Top Pressure: Belt-driven Spraying Unit (for liquid non-stick agent) Adjustable Fence, CNC controlled Pre-milling Unit with CNC control 08.378 (2 x 4.5 kW) Lamps for panel side heating Gluing Unit (Hot Melt Glue + pre-melter) 04.1570 Spraying Unit (for separating fluid) Edge Pressure Zone Ibodpfxjm Udfws Aquoc Edge Magazine for Rolls (compartment no.): 16 Cross-cutting Unit 08.42/30/B (2 x 0.66 kW - Pneumatic 0° - 25°) 30 m/min Multi-profile Milling Unit (CNC controlled) 08.0587 (2 x 1 kW) Spraying Unit (for sliding fluid) Contour Trimming Unit (for fine trimming) CNC controlled KFA 30 (08.355 - 1 x 0.5 kW) 30 m/min Shaping Copy Milling Unit 08.604 (4 x 0.25 kW) Spazzola Multi-profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.521 Spraying Unit (for polishing fluid) Buffing Unit 08.617-4 (4 x 0.18 kW) Surface Smoothing Unit 08.53

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Ibjdpsgbug Nofx Aqujc Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Ijdsr Ttfljpfx Aquebc Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Ibodoi Hn Srjpfx Aqujc Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Ibjdpfx Aod Scydsquoc Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Iodpfxeltmnlo Aquebc Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: rabljeno, Leto izdelave: 2008, moč: 41 kW (55,74 KM), največja debelina roba: 3 mm, model krmilnika: ICOS OPEN, Stroj ima naslednjo konfiguracijo: Ibedpfjzmtkaox Aqusc Predrezalna enota Model proizvajalca: R3 L20 Nadzor vklopa: Samodejni, časovno uravnan Moč motorja: 4 kW Število vrtljajev: 9.000 vrt/min Obdelava robov Število enot za obdelavo robov: 10 Enota za prečno žago Model proizvajalca: 8,42/39/B Število motorjev: 2 Moč motorja: 0,6 kW Število vrtljajev: 12.000 vrt/min Enota za ravnanje in zaokroževanje robov Model proizvajalca: 08.055 Število motorjev: 0,6 (?) Moč motorja: 1 kW Število vrtljajev: 12.000 vrt/min Enota za zaokroževanje kotov Model proizvajalca: 08.342 Število motorjev: 2 Moč motorja: 0,66 kW Število vrtljajev: 12.000 vrt/min Enota s potisno rezilo Model proizvajalca: 08.50 Enota za brušenje s trakom 1 Model proizvajalca: 08.62 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 2 Model proizvajalca: 08.062 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 3 Model proizvajalca: 08 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 4 Model proizvajalca: 08.617-2 Moč motorja: 0,18 kW Število vrtljajev: 1.400 vrt/min Enota za brušenje s trakom 5 Model proizvajalca: 08 Enota za obdelavo 10 Model proizvajalca: 08.190 Moč motorja: 4,5 kW Število vrtljajev: 9.000 vrt/min TEHNIČNE PODROBNOSTI Dimenzije obdelovanca Maks. višina plošče: 60 mm Min. dolžina plošče: 130 mm Min. širina plošče: 65 mm Material robov Min. debelina roba: 0,4 mm Maks. debelina roba: 3 mm Napajanje Maks. hitrost napajanja: 30 m/min Pritisk: Gumijast pas Število enot za obdelavo/rezanje plošče: 1 PODROBNOSTI O STROJU Nadzorni sistem: ICOS OPEN Skupna priključna moč: 41 kW OPREMA Število enot za obdelavo/rezanje plošče: 1 Luči za predgrevanje strani plošče Magazin za robne valje z 2 položaji Talilni grelec za PUR lepil Komplet pritiskalnih valjev z 5 pritiskalnimi valji Brizgalna enota Stroj se prodaja in dobavlja v trenutnem in dejanskem stanju („tako kot je in kjer je“), na podlagi fotodokumentacije in tehnične/komercialne dokumentacije, ki ima opisni značaj. Kupec ima pravico, da pregleda blago pred prevzemom in prevzema odgovornost za namestitev, varno delovanje in uporabo stroja na končni lokaciji. Zunanja referenca: 5657

Stanje: rabljeno, Leto izdelave: 2009, Stroj za obdelavo robov Proizvajalec: IMA Tip: Novimat/I/G80/650/R3 Letnik proizvodnje: 2009 Tehnični podatki - Izstop obdelovanca iz transportnega sistema: 38 mm - Širina prehoda: min. 65 mm (pri največji debelini obdelovanca 25 mm) - Dolžina obdelovanca v smeri podajanja: 150 mm - Osnovna višina (zgornji rob transportnega sistema): 960 mm - Hitrost prehoda: pribl. 6 - 30 m/min, električno nastavljiva - Nadzorna enota stroja ICOS open compact Obdelovanec - Dolžina obdelovanca: min. 150 mm - Širina obdelovanca: min. 65 mm - Debelina obdelovanca: 8 - 40 mm (z funkcijo kopiranja) / 60 mm (brez funkcije kopiranja) - Najmanjši obdelovanec: 150 x 150 mm oz. 65 x 300 mm - Material za robove: papir, plastika in furnir - Višina: 14 - 65 mm - Debelina materiala za robove: 0,3 - 3,0 mm (furnirni robovi omejeni na max. 1,0 mm) - Največji zgornji previs roba: 5 mm Agregati Vhodni del - Razpršilnik za ločilno sredstvo, pritrjen na vrhu in na spodnji strani, ni nastavljiv Frezanje spoja - 2 motorja 4,5 kW, 150 Hz, 9000 vrt/min - vklj. frekvenčni pretvornik z zavorno funkcijo - Motor 1 deluje v nasprotni smeri - Motor 2 deluje v isti smeri Lepilni agregat VTG 3-6 - z razpršilnikom 300 mm za predgretje roba obdelovanca - 6-mestni predal za material za robove debeline 0,3 - 3 mm. - 1 pogonjen glavni pritiskalni valj in 4 pritiskalnih valjev, z nastavljivim strgalom, pnevmatično nastavljiv Nanashanje lepila - s pnevmatičnim sistemom za hitro namestitev - Chem-Coat prevleka - elektronska regulacija temperature - Volumen 0,8 l Predgretje lepila pribl. 1 l - Moč gretja 3 x 400 W - pri lepilu, napolnjenem z EVA, pribl. 7,0 kg/h - pri lepilu brez polnila pribl. 5,0 kg/h Agregat za obrezovanje - 2 motorja 660 W, 200 Hz - vklj. frekvenčni pretvornik z zavorno funkcijo - pnevmatično nihanje 0+25 za ravno in fazno obrezovanje Frezanje v ravnini - 2 motorja, vsak 1000 W, 400 V, 200 Hz, 12000 vrt/min - z vpenjalom HSK 25 - vklj. frekvenčni pretvornik z zavorno funkcijo Agregat za večprofilno frezanje - 2 motorja, vsak 660 W, 400 V, 200 Hz, 12000 vrt/min - z vpenjalom HSK 25 - vklj. frekvenčni pretvornik z zavorno funkcijo - za frezanje 4 profilov - s servo osmi za horizontalno in vertikalno pozicioniranje Agregat za konturno frezanje KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 vrt/min - Programsko nadzorovana nastavitev za do 4 profile - vklj. natančno pozicioniranje za različne debeline robov Večprofilni rezalnik - Servo osmi za horizontalno in vertikalno pozicioniranje - tipa od zgoraj in od spodaj (max. 4 profili) - stranski dotik s pnevmatičnim pritiskom Razpršilne šobe na vrhu in na spodnji strani za nanašanje čistil - trdno pritrjene, ni nastavljive Regalnik - z drsnim elementom za ugotavljanje višine - elektronska horizontalna nastavitev Agregat za izpolnjevanje Ibodszuyi Eopfx Aquoc - 2 spodnja in 2 zgornja motorja, 180 W, 50 Hz, 1400 vrt/min - 1. par motorjev s krpami-sisalnimi diski 50x160x19 mm - 2. par motorjev s polirnimi diski 50x160x19 mm - Motorji delujejo v isti smeri in so nastavljeni tako, da so nagnjeni, kot tudi nagnjeni v smeri podajanja. - Vsak motor je individualno nastavljiv po višini. 2x NC nadzorovana žlebitev - 2 frezalni motorji, vsak 4,5 kW, 150 Hz, 9000 vrt/min - vklj. frekvenčni pretvornik z zavorno funkcijo - z ročno 90-stopinjsko nastavitveno napravo od 180 -270 s funkcijo delovanja v isti in nasprotni smeri - Horizontalna brezstopenjska nastavitev z AC-servo motorjem za agregat za žlebitev Povrat obdelovanca Opomba: Tehnični podatki i

Stanje: rabljeno, številka stroja/vozila: 005642, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 2: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 4: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Ibodpfx Aowuciwjquec Pozicija 5: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 6: Razkladalec IMA + MEINERT-COMBIMA/II/650/A/R3

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Na voljo je enostranski IMA robni obdelovalni stroj za formatiranje, lepljenje in dodelavo lesenih plošč. Minimalne dimenzije obdelovanca X/Y/Z: 150mm/130mm/16mm, maksimalne dimenzije X/Y/Z: 2350mm/800mm/40mm, maksimalna teža obdelovanca: 50kg, kot obdelovanca: 90°, material: iverna plošča/MDF, delovna višina: 960mm. Gre za celovit sistem s transportnimi in perifernimi enotami. Dokumentacija je na voljo. Možen je ogled na lokaciji. Iodpfozidi Ssx Aqujbc

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Iodpfox A Hggox Aqujbc Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Ponujamo 1,5-krat verižno IMA linijo za obdelavo robov z avtomatskim prenosom obdelovancev Venjakob. Največja delovna širina: 2500 mm, kot prenosa: 90°, razdalja med robovi obdelovancev: 6000 mm. Krmiljenje: Siemens S5. Vključno s periferno opremo in transportom. Potrebna postavitvena površina: ca. 250-300 m², skupna dimenzija X/Y: ca. 19000 mm/13600 mm. IMA. Upravljalni računalnik: obnovljen leta 2018. Ogled možen po dogovoru. Iedpfx Aszh Nh Requebc

Stanje: rabljeno, številka stroja/vozila: 005639, Tip pritrjene obrobe: tanka obroba, močna obroba Lepilni sistem: EVA Večnamenski agregat: da Stroj za lepljenje obrob: Stroj 1 in 2 Maks. širina panela: 3000 mm Maks. podajalna hitrost: 50 m/min Delovni agregati, desna stran: 12 kos Ibjdpfx Ajvw Evgjqusc Delovni agregati, leva stran: 12 kos

Stanje: rabljeno, številka stroja/vozila: 005637, Vrsta pritrjene obrobe: tanka obroba, debela obroba Sistem lepljenja: EVA Stroj za lepljenje obrob: Stroj 1 Maks. širina plošče: 1300 mm Maks. podajalna hitrost: 50 m/min Ibedpjvw Ev Hefx Aquoc Delovni agregati, desna stran: 11 kos Delovni agregati, leva stran: 12 kos

Stanje: rabljeno, številka stroja/vozila: 008266, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroj za obrobljanje robov: stroj 1 in 2 Največja širina panela: 3000 mm Največja hitrost pomika: 25 m/min Delovne enote, desna stran: 9 kos Iodox A Hfiepfx Aqujbc Delovne enote, leva stran: 9 kos

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND SIZING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Isdpfoyypi Uox Aquobc Working width (min/max) mm: 236 / 1300 Control system / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) SIZING UNIT (per side): Sprayer unit (for liquid non-stick agents) Milling unit (2 x 8 kW) EDGE PROCESSING UNIT (per side): Gluing station (hot melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no.): 6 Servo-drive guillotine shear (for cutting the edge material) Pressure zone (CNC-controlled) Premilling unit 08.055 (2 x 1 kW) 0°-30° Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Sprayer units (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°-90° / 180°-270°

Stanje: delavnici obnovljeno (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a processing line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in strips/bands (min/max): 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Isdpfoyyya Dsx Aqujbc Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMATTING (for each side): Spraying unit (for liquid anti-adhesive) Jointing milling unit - 08.379 (2 x 4 kW) EDGE PROCESSING (for each side): Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Pressure zone (CNC-controlled) + edge magazine for rolls (No. 6 positions) End trimming unit 08.42/30/B (2 x 0.66 kW) max 30 m/min Milling unit 08.055 (1 x 2 kW) 0°-30° Contour trimming unit (for fine trimming) CNC-controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, hitrost pomika os X: 30 m/min, model krmilnika: ICOS OPEN, The machine has the following configuration: Unit: Pre-milling Manufacturer model: 08.379 Motor power: 4 kW Speed: 8,800 rpm Unit: Cross-cut unit Manufacturer model: 08.42 / 30 / B Number of motors: 2 Motor power: 0.660 kW Unit: Corner rounding unit Manufacturer model: 08.055 Number of motors: 2 Motor power: 1.850 kW Speed: 12,000 rpm Unit: Profile scraping unit Manufacturer model: SKF-L Number of motors: 4 Max. processing speed: 20 m/min Motor power: 0.180 kW Speed: 12,000 rpm Ibsdpfeyzy Iwox Aquec Unit: Edge scraper Manufacturer model: 08.519 Unit: Glue scraper Manufacturer model: 08.521 Unit: Brushes Manufacturer model: 08.617-2 Number of motors: 2 Motor power: 0.180 kW Speed: 1,400 rpm TECHNICAL DETAILS Min. panel height: 8 mm Max. panel height: 60 mm Min. panel length: 150 mm Min. panel width: 65 mm Min. edge thickness: 0.3 mm Max. edge thickness: 20 mm Max. feed speed: 30 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Magazine for roll material Hot melt glue tank Edge pressure roller unit Pressure with rubber-coated belt The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6089

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.8 / 3 Panel thickness (min/max) mm: 10 / 50 Control system: ICOS Open Feed speed m/min (adjustable): 6 - 30 Adjustable fence, CNC controlled Jointing unit (CNC controlled): 1 x 75.186 (1 x 4.5 kW) + 2 x 08.378 (2 x 4.5 kW) Gluing unit (premelter with laser): IMA Laser System LASERLINE (Year 2025) Pressure zone + edge magazine for rolls (12-fold) End trimming unit 08.42/30/B (0.66 kW x 2), speed 20+30 m / min (0° -25°) Sprayer unit (for liquid anti-stick agent) Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (0.66 kW x 1), 4 profiles Contour milling unit (for finishing), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Standard milling unit for grooving/rebating (CNC controlled) Ijdsy Spclspfx Aqujbc Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4), RIEPE (also for PMMA) OPTIONAL: Automatic return system "GELDMEIER" (SOFIT Ref. No. O11043)

Stanje: rabljeno, številka stroja/vozila: 006089, Type of applied edging: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunctional unit: yes Ibodpfx Aey Nknwequjc Max. feed speed: 30 m/min Maximum panel thickness: 60 mm Working units: 8 pcs