Gmatick Gmbh Naravni Kavčuk Gumijasta Membrana nakup rabljenega (69.867)

Leto izdelave: 2025, stanje: novo, Naravna kavčukova membrana ali silikonska membranska plošča Na področju izdelave 3D pohištvenih front vam nudimo tudi rešitve za preše, stroje za rezanje folij, vertikalne skladiščne sisteme za folije ter čistilne stroje! MEMBRANA za membranske preše – iz silikona ali naravnega kavčuka Najvišja kakovost, primerna za vsako membransko prešo (preše za folijo in furnir). Csdpfx Aji E Hp Tsgtjha Naše membrane lahko prejmete že narezane na želene mere ali kot blago v rolah. NARAVNI KAVČUK Tip: RM-2 Barva: siva Površina: gladka/gladka Standardne širine: 1700 in 2000 mm Kavčuk: naravni kavčuk Trdota: cca. 42°Shore Debelina: 1,8 mm, 2,5 mm in 4 mm Obratovalna temperatura: min.-20°C/max.+130°C

Leto izdelave: 2025, stanje: novo, Silicone membrane sheet for membrane presses, silicone membrane for membrane presses, natural rubber membrane MEMBRANES for membrane presses – silicone or natural rubber Highest quality, suitable for all membrane presses (for foil and veneer pressing). Our membranes are available pre-cut to your required dimensions or as roll stock. For 3D furniture front production, we also offer solutions for presses, foil cutting machines, foil carousel systems, and cleaning machines! MEMBRANES for membrane presses – made from silicone or natural rubber Highest quality, suitable for all membrane presses (for foil and veneer pressing). Our membranes are available pre-cut to your required dimensions or as roll stock. SILICONE Type: SM-1 3mm Color: translucent milky Surface: smooth / smooth Standard widths: 1700 and 1800 mm Polymer base: silicone Hardness: 50° Shore Thickness: 3mm Operating temperature: min. -50°C / max. 230°C SILICONE Chjdpfxsff Agie Agtja Type: SM-1 2mm Color: translucent milky Surface: smooth / smooth Standard width: 1700 mm Polymer base: silicone Shore hardness: 50° +/- 3° Shore Thickness: 2mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: RM-2 Color: grey Surface: smooth / smooth Standard widths: 1700 and 2000 mm Rubber: natural rubber Hardness: approx. 42° Shore Thickness: 1.8mm, 2.5mm, and 4mm Operating temperature: min. -20°C / max. +130°C For 3D furniture front production, we also offer solutions for presses, foil cutting machines, foil carousel systems, and cleaning machines!

Stanje: novo, Leto izdelave: 2026, TOP Storage Carousel for 3D Film Rolls Chjdpjff Huwefx Agtea Our film storage carousels are suitable for storing all types of film rolls. They can be used as high-bay storage at the membrane press or as a space-saving 3D film storage solution. With our carousels, a large number of film rolls (up to 32 rolls with a diameter of 300mm) can be stored on a minimal footprint of approximately 2.4m x 1.2m. The required film is available immediately at the push of a button. Our carousels are designed and available as standard models with heights ranging from 2.8 meters to 6.0 meters. We also offer custom solutions. Please contact us and we will find the right storage solution for you. As optional equipment, we offer centering sleeves, manual or automatic cutting devices, as well as ionization solutions. • Suspension rods ranging from Ø 42.4mm up to max. 76mm • Full-height side cladding • Protective grid from 2.2m above floor level up to the top of the carousel • Load chain as hollow pin chain, breaking strength 100kN, pitch 50mm = Suspension bar mounting grid, carousel speed approx. 5.5 m/min • Control via keyed switch with return spring (dead man’s control) for up/down operation • Rated voltage 400V; 3N; 50Hz, mains cable with CEKON plug 16A, external circuit protection 10A slow-blow • Attention! Installation requires a stable, level, and solid floor—no floating screed. Minimum floor load capacity must be at least 2.4kg/cm²

Stanje: rabljeno, Leto izdelave: 2009, x-travel: 4000, y-travel: 2000, z-travel: 600 Dimensions (LxWxH): 6,400 x 3,200 x 3,100 mm Chsdswiatiepfx Agtea Weight approx.: 10,500 kg Waterjet Cutting System Stein-Moser GmbH CNC 5-axis 4020 x 2020 x 600 mm Technical Data: - Working area X, Y 2D: 4,020 x 2,020 mm - Support surface X, Y: 4,400 x 2,400 mm - Z-axis: 600 mm - Swivel range A, B: +/- 46° - Rotary axis C, 360° rotation: +/- 3,600° - Positioning speed: 10 m/min - Repeat accuracy: +/- 0.1 mm - Pneumatic connection: min. 6.5 bar - Water connection: 2 – 5 bar - Machine dimensions LxWxH: 6,400 x 3,200 x 3,100 mm - Weight (with water): approx. 10,500 kg - Operating temperature: +10°C to +40°C - Max. operating pressure, high-pressure waterjet component: 4,000 bar TOOLS / SPARE PARTS WORTH approx. €25,000 INCLUDED. New price approx. EUR 300,000 for the waterjet cutting system. Includes 3 tons of cutting sand. Serial: WS2040HB/090601 Type: WS 2040 HB Tank 4.2 PC cabinet (Rittal) on castors with air conditioning unit, contains: servo controller, TYM NUM AXIUM POWER, NUM MDLU 3 drive system, control PC, monitor, splash-proof keyboard and mouse, handheld control device for manual machine operation. - Connection values: 400 V AC, 16 A - Control voltage: 24 V DC NUM AXIUM POWER servo controller: - Central unit for CNC, PLC, and communication functions - Decentralized I/O modules with 32/32 digital inputs/outputs via fiber optics MDLU 3 drive system: - Fully digital, compact, integrated power supply - Integrated position, speed, and current control - Brushless digital servomotors - High-resolution measurement system via integrated SinCos encoder - Motor rated power: 2 kW CAD/CAM software Complete package for creating or importing drawings, setting process-specific parameters for the waterjet, and controlling the machine. - Direct machine control - 32-bit Windows software - Automatic approach strategies - Automatic correction sequence - Cutting direction freely selectable for each contour - Jet correction - Material database - Visual cut monitoring - HPGL and DXF import - Automatic pump pressure setting

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11H82290, Stroj za proizvodnjo učbenikov E.C.H. WILL GmbH / Model Alpha RF (proizveden leta 2012) Za proizvodnjo končnih učbenikov s predhodno natisnjenimi platnicami Tehnični podatki Hitrost papirnatega traku/minuta: maks. 300 m Delovni cikli/minuta – enota za predelavo: maks. 60 Pri proizvodnji 4 učbenikov naenkrat – učbenikov/uro: maks. 14.400 Širina role: maks. 960 mm / min. 580 mm Premer role: maks. 1.200 mm Dolžina tiska (obseg cilindra): maks. 670 mm / min. 300 mm Dolžina reza – prečni rezalnik: min. 300 mm Za proizvodnjo učbenikov: maks. 500 mm Za proizvodnjo zvitkov: maks. 670 mm Koraki prilagoditve: 5 mm Število rezov/minuta – prečni rezalnik: maks. 1.000 Razpon velikosti končnega izdelka (nerazrezana stran x razrezana stran): maks. 245 x 480 mm min. 145 x 145 mm Število listov: min. 5 / maks. 50 Debelina izdelka (nerazgrnjen): maks. 5 mm Glavna oprema Enote za navijanje • 2 x enote za navijanje na gredi Naprava za označevanje • 1 x naprava za označevanje za največ 4 enote za označevanje Opomba: Naprava za označevanje je opremljena za: • 2-barvno označevanje iz 1 traku, ali • 1-barvno označevanje iz 2 trakov Enota za vzdolžno perforacijo (za delovanje z 1 trakom) • 1 x enota za vzdolžno perforacijo Enota za prečni rez Cjdpfszq Av Tox Agtsha • 1 x sistem za prečni rez z 1 rezilom, ki omogoča hitro in enostavno menjavo in nastavitev rezila Antistatični sistem • Antistatična oprema za rokovanje s papirjem Naprava za prekrivanje listov • 1 x naprava za prekrivanje listov Naprava za štetje in razvrščanje listov • Sistem za štetje in razvrščanje listov Naprave za podajanje platnic (1. / 2. / 3. / 4. naprava za podajanje platnic) • Samodejna naprava Will za podajanje predhodno natisnjenih platnic Naprava za odlaganje velikih količin • Naprava za odlaganje velikih količin, v liniji, za zbiranje velikih količin listov Enota za spenjanje • Debelina žice: št. 24–26 • 9 x enote za spenjanje Enota za sekcijsko zlaganje • 1 x enota za sekcijsko zlaganje Enota za ravnanje hrbtne strani • 1 x enota za ravnanje hrbtne strani Rezalnik • 1 x rezilo za obrezovanje robov • 3 x ločevalna rezila • 2 x stranska rezila Naprava za zaobljanje vogalov • Enota za zaobljanje vogalov za končne učbenike Naprava za obračanje učbenikov • Postaja za obračanje učbenikov za enakomerno zlaganje Naprava za odlaganje zlaganih učbenikov • Naprava za odlaganje zlaganih učbenikov • Miza za odlaganje in mešanje naslovnic (nadgrajeno) Električna oprema • Naprava za vzdrževanje primerne temperature za elektronske komponente v omaricah stikal Pnevmatska oprema • Pnevmatski sistem za delovanje stroja

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna masa: 44.000 kg, dolžina rotorja: 2.800 mm, moč: 315 kW (428,28 KM), največja hitrost vrtenja: 87 obr/min, - MERAK 2800-2 with 315 kW Chjdpfx Aeugf Dwegtja - 116PR cutting system - PG190 screen (can be changed according to customer requirements) - Feed hopper - Dust suppression - Electric central lubrication - Hydraulic circuit protection - Overband neodymium magnetic separator – HP - Rubberized, bolted track pads on crawler chassis

Stanje: novo, Leto izdelave: 2025, Features: - Overband neodymium magnetic separator - HP - Dust suppression Csdpfx Aow Elbdegtsha - Belt speed control - Self-propelled drive for semi-trailer

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10044/0218, Podrobne fotografije in specifikacije izdelka najdete v datoteki PDF, ki je priložena. Stroji so posebej zasnovani za obdelavo zaročnih prstanoв in zapestnic. Ločitev obdelave notranjih in zunanjih površin na dva stroja zagotavlja visoko produktivnost. Vse potrebne operacije struženja (ravna obdelava, obdelava robov, stranska obdelava in faziranje) je mogoče izvajati zaporedno, brez potrebe po prilagoditvah ali predelavah strojev. Codpjy S Sz Rsfx Agtjha Tehnične specifikacije: TLI 10 Parameter Vrednost Pogon 0,55 kW z električno zavoro Napajanje 380 V / 50 Hz Regulacija hitrosti potenciometer Območje hitrosti 0–1400 vrt/min Dimenzije 100 × 70 × 130 cm Masa 170–190 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Ponujamo pocinkano tlačilno posodo – 5000 l. Proizvajalec: OKS Otto Klein GmbH Največji delovni tlak: 11 bar Leto proizvodnje: 2019. Dimenzije: Premer: 1400 mm Višina: 3570 mm Masa: 1050 kg Tlačilna posoda z dokumentacijo. Chodpfxezrmk Do Agtja Tlačilna posoda, vključno z armaturami – varnostni ventil, manometer + prirobnice. Tlačilna posoda, rezervoar za zrak, tlačna posoda.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 1.000 mm, Zeiss CNC koordinatni merilni stroj Prismo Mass VAST GOLD Letnik izdelave: 2021 Zadnja kalibracija: 02/2025 Obseg meritev: X = 1200 mm, Y = 1800 mm, Z = 1000 mm Tehnično in vizualno v stanju, kot nov Stroj je bil nameščen v klimatiziranem prostoru za natančne meritve. Lastnosti in oprema stroja: Krmilnik C99 z nadzorno ploščo BP26_SE Avtomatska temperaturna kompenzacija Senzorski sistem VAST GOLD Avtomatski menjalnik tipalk, 9-pozicijski Referenčna tipalka Temperaturna tipalka Menjalnik tipalk, 7-pozicijski Kalibracijska kroglica Delovna postaja HP Z4 z monitorjem Programska oprema Calypso Basic 2022 Cjdpfezr I R Esx Agtjha Dodatne možnosti: modul za krivulje, pretvornik QDAS in sistem za poročanje PiWeb Na voljo je tudi dodatna oprema in možnosti. Na voljo v kratkem roku.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Modul za doziranje etiket za integracijo tiskanja, tiskalni modul 4L300 za termični transferni tisk, transportni trak, glejte fotografije za opis. Cedpfxszn N Nns Agtsha

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400-223, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 200 mm, hitrost pomika os X: 20.000 m/min, hitrost podajanja osi Y: 20.000 m/min, hitrost podajanja os Z: 20.000 m/min, montažni premer: 40 mm, dolžina mize: 2.500 mm, širina mize: 1.250 mm, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 30.000 obr/min, hitro pomikanje X-os: 20.000 m/min, hitri pomik os Y: 20.000 m/min, hitri pomik na osi Z: 20.000 m/min, premer orodja: 20 mm, število mest v zalogovniku orodij: 30, Ponujamo rabljeni portalni rezkalni stroj MB-Portatec GmbH basic II.S, letnik 2011. Chjdpfx Agey U R Syjtsa Proizvajalec: MB - PORTATEC GmbH Tip: basic II.S Serijska številka: 400-223 Leto izdelave: 2011 -Področje uporabe: Obdelava aluminijastih in plastičnih plošč do 2500 mm. -Dodatna možnost: vertikalni vpenjalni sistem. -Pribor: vakuumska črpalka in odsesovalna naprava s predfiltrom. -MMS sistem -Programabilna vakuumska polja Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2808, skupna višina: 2.400 mm, skupna dolžina: 3.300 mm, skupna širina: 2.200 mm, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 350 mm, skupna masa: 7.000 kg, potovalna razdalja osi X: 450 mm, pomik osi Y: 250 mm, pomik po osi Z: 350 mm, CNC brusilni center za zunanje, notranje in profilno brušenje s tremi linearnimi osmi in vrtljivo brusilno glavo. Modularno konfigurabilen za različne brusilne naloge, z avtomatiziranimi cikli obnavljanja, sodobnim upravljanjem, vodenjem orodij in možnostmi za merilne sisteme ter periferijo, kot so priprava hladilnega sredstva in odsesavanje. Cedpfxjxuicho Agtoha

Stanje: novo, Kroglično vreteno STAR Tip: 1510-3-1607 Chjdpszcwkwjfx Agtea Vodilni korak: 5 mm Dolžina navoja: 2008 mm Skupna dolžina vretena: 2100 mm Premer navoja: 31 mm 4 kosi na zalogi

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, hitri pomik os Y: 20 m/min, največja hitrost vretena: 60.000 obr/min, montažni premer: 3 mm, skupna širina: 800 mm, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, višina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 30 °C, priključek za stisnjen zrak: 6 letvica, delovna dolžina: 320 mm, število osi: 3, The compact table-top version LOW MINI was specifically developed for depaneling small-format series, small quantities of large-format PCBs, and cost-conscious production. PCB materials with remaining tab connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled in all axes, with the milling spindle operating from above. The real highlight of the machine is the easy and straightforward switch of working area from small (320x280mm) to large (320x560mm) format. • Short cycle times due to shuttle operation • X-/Y-axes with linear motor technology • PCB fixation with pin technology • Flexible handling • PCBs with residual tab connections • Milling spindle adjustment with servo technology • Extraction unit • Easy operation • Excellent price/performance ratio Manual depaneling – flexible and cost effective Chsdoxmfdxopfx Agtsa The concept of manual depaneling offers significant advantages in terms of flexibility and cost. Medium batch sizes can be quickly and with minimal dust separated using the LOW MINI. The standard version features dual loading with linear motor technology; for enlarging the working area, single-shuttle operation is possible. Ease of maintenance and operation, combined with the outstanding price/performance ratio, provide a comfortable working experience, making the investment in this depaneler economically worthwhile as well. Axis speed: 160mm/s Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tools: 0.8 - 2.4mm

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 XL is specifically designed for medium to high product volumes and meets increasing demands in the production process. PCB panels of various material types are separated using low-dust and low-stress sawing and milling technologies, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, tooling, and grippers satisfy the highest quality standards and guarantee long service life and reliability for the depaneling solution. Semi-automatic Depaneling – Solutions on Demand The LOW 4322 XL depaneling machine allows for rapid product changeover while maintaining short separation and handling times. Panelized PCBs are loaded via a parallel shuttle, clamped using pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module configured as a parallel shuttle, separated left and right with sliding doors Csdevuw R Repfx Agtsha • Steel welded frame with two maintenance doors – left and right. ESD • Standard vision system base module for teach-in programming • Working area: 520 x 480 mm • Automatic milling cutter length processing • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system • Laser axis measurement including protocol • Air ionization • Milling cutter breakage monitoring (shaft milling cutters only) • Prepared for vacuum clamping technology • ESD powder coating, RAL 9002, including window and sliding doors An optional dust extraction unit can be offered retrospectively.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 160 kg, skupna dolžina: 1.300 mm, skupna širina: 800 mm, skupna višina: 1.930 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, valovna dolžina laserja: 10.600 nm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: CO₂ laser, Oprema: osvetlitev, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V Codpfowkpyhex Agtsha • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. Chsdpfxowkpx Rs Agtoa By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 140 kg, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 2.000 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of lasers has become indispensable in many industries. The powerful laser software enables the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and little programming knowledge. The software automatically increments serial and article numbers as preset. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Cjdpfxexuvk Es Agtoha Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna višina: 1.660 mm, Leto izdelave: 2025, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser for Product Marking – The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser technology has become indispensable for durable marking. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software increases serial and article numbers automatically after initial setup. Furthermore, the software can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) Chodpfswkpwajx Agtea • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – system for automatic focus distance determination • Signal tower for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (work level adjustment) • Frame made of aluminum profile • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) Cjdpfjuy H Nqex Agtsha - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 690 mm, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, LASER - LAS 22 is a compact benchtop device with a small work area, making it ideally suited for small parts or, for example, nameplates and type tags. Its compact design makes the system highly practical and suitable for use virtually anywhere. The device is very easy to operate, with no programming knowledge required. With the powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos in just a few clicks—no advanced programming skills necessary. Serial and article numbers are automatically incremented by the software after initial configuration. Additionally, the software can import variable data (such as drawing numbers, project names, etc.) from existing tables and automatically insert it into predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20 watt fiber laser (optional: 30 watt) - Laser class 1 - Wavelength: 1064nm - Marking field size: 110 x 110 mm - Marking software: EZCAD (German / English) - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height: approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg Cedpoxqhnzefx Agtoha - Low operating costs

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1996, Zmogljivost: 1040 x 3,5 mm - Zaščita svetlobne palice zadaj - Kombinirana zavora in sklopka Ortlinghaus - Naključni valjčni transporter oz. dvižna naprava za pločevino s plastičnimi valji - Centralno podmazovanje Chedpfx Agozq Uvxjtsa

Leto izdelave: 2008, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 346100, Machine SAR-1000-B-015, incl. dodatki: ekstrakcijska enota ULT ASD 300 Ex. Uporabniški priročnik je na voljo kot PDF. Stroj je trenutno v stanju, kot je prikazano na slikah. Po potrebi ga lahko za prevzem postavimo na palete. Stroj je pregledalo podjetje Schunk; ugotovljen je bil potreben naslednji rezervni material: - z-os - Ležaji osi Y1 + Y2 - Zamenjati napajalni kabel, kabel Hallsensorja in pnevmatske cevi - Zavora osi X - Priključek za odsesavanje + cev za odsesavanje - Senzor shuttle (B4.3/E) - Nosilci orodij (5 kos) - Zamenjati UPS - Krtača pritrdila - Žarnica za signalno luč - Tesnilni obroček pritrdila, pnevmatski cilinder, vodilna os + drsna puša, pritrdilna plošča vretena - Zunanji izpušni kanal ULT - Dvižni cilinder mize (?) - Po podatkih podjetja Schunk materialni stroški cca 16.000 € Chodpfx Agjxwvrustsa Ker stroj prodajamo kot okvarjen/potreben popravila in smo navedli vse znane napake, se blago prodaja z izključitvijo kakršne koli garancije in stvarne napake.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.500 mm, merilno območje os Z: 700 mm, Oprema: Na voljo je tipska ploščica, Zeiss CNC koordinatni merilni stroj Prismo 9/15/7 VAST GOLD Letnik: 2000 Modernizacija 2024, zadnja kalibracija DAkkS 12/2021 Merilno območje: X = 900 mm, Y = 1500 mm, Z = 700 mm Tehnično in vizualno v odličnem stanju. Lastnosti in oprema: Upravljalnik C99 s kontrolno ploščo BP26 Samodejna temperaturna kompenzacija Senzorski sistem VAST GOLD Menjalnik tipalk MSR 10-krat VAST Menjalnik tipalk (krožna plošča) 8x VAST Referenčna tipalka Temperaturna tipalka Dodatna oprema za tipalke Kalibracijska krogla Delovna postaja HP Z4 z operacijskim sistemom WIN11 in monitorjem Chsdpfx Agezq U Rcjtea Programska oprema Calypso Basic 2024 Dodatne možnosti: Curve in QS-Stat Možna nadgradnja Calypso in druge možnosti Na voljo dodatna oprema in možnosti Kratkoročno na voljo