Gea-Cfs Toplotna Peč Na Vroč Zrak, Tip Hlt 8000/1000 nakup rabljenega (67.783)

Stanje: rabljeno, električno ogrevan Ogrevanje je mogoče ločeno uravnavati v dveh conah brezstopenjska hitrost širina sledi ± 1.000 mm 270 kW, 411 A pokrov z električnim dvigalom primerno za injekcijo pare (ogrevanje, izkoristek produkta) primerno za čistilni sistem »CIP« z drobno žično trakom zunanja mera (D x Š x V): ± 9.000 x 2.600 x 3.700 mm v dobrem stanju Popolnoma mehansko obnovljeno: Novi ležaji, verige, tesnila, drsne puše, zobniki itd. Vsi (motorno) pogonjeni pogoni so obnovljeni ali popolnoma zamenjani pokrov in posoda sta popolnoma novo izolirana Chsdpfx Anjz Ep A Hsusc nova mrežasta traku, standardne mere za prigrizke vsi deli, ki so občutljivi na obrabo, so zamenjani ali popolnoma obnovljeni splošno čiščenje, obnova in pregled konstrukcije Popolnoma električno obnovljeno + posodobitev omarice in nadzora: vse električne komponente in kabli so popolnoma zamenjani konvencionalno upravljanje s tipkami in Jumo-temperaturnim PID-regulatorjem nove električne sheme (E-plan) novi senzorji označevanje komponent in kablov Novi električni grelni elementi: novi ukrivljeni grelni elementi popolnoma na novo ožičeno električno testirano, ogreto in premerjeno

Stanje: rabljeno, električno ogrevan Ogrevanje je ločeno nastavljivo v dveh conah Csdpfx Anozxdn Teuohc brezstopenjska regulacija hitrosti širina tirnice 600 mm pokrov z elektromehaničnim dvigalnim sistemom primeren za vpihovanje pare (ogrevanje, izkoristek produkta) 180 kW / 275 A z dodatnim vstopnim in izstopnim trakom primeren za čiščenje s sistemom »CIP« zunanja dimenzija (dolžina x širina x višina): ± 9.500 x 1.900 x 3.700 mm

Stanje: rabljeno, primerno za ogrevanje s termičnim oljem ogrevanje je mogoče ločeno regulirati v dveh conah Cedpfx Ansz Harzouehc brezstopenjska regulacija hitrosti širina tirnic ± 1.000 mm skupna dolžina ± 9.400 mm pokrov z električnim dvižnim mehanizmom primerno za injekcijo pare (ogrevanje, povečanje proizvodnje) primerno za sistem čiščenja "CIP" zunanja dimenzija (D x Š x V): ± 12.609 x 2.098 x 3.400 mm z dodatnim izhodnim trakom: (d x š): ± 2.000 x 1.000 mm v dobrem stanju Popolnoma mehansko obnovljeno: nove ležaje, verige, tesnila, drsne puše, zobniki, ... vsi (motorno) pogonjeni pogoni so bili obnovljeni ali zamenjani pokrov in kad sta popolnoma na novo izolirana nov trak za peko, standardne dimenzije za prigrizke vsi deli, ki se hitro obrabijo, so zamenjani ali popolnoma obnovljeni splošno čiščenje, obnova in pregled konstrukcije Popolnoma električno obnovljeno + posodobitev omarice za nadzor in sistema nadzora: vse električne komponente in kabli so na novo zamenjani konvencionalno upravljanje s pomočjo gumbov in Jumo temperaturnim PID-regulatorjem nove električne sheme (E-plan) novi senzorji označevanje komponent in kablov Nova termična postaja za regulacijo olja: pnevmatsko upravljani 3-potni regulacijski ventili za termično olje (A, B, AB) obvozni krog filter za termično olje membranski izolacijski ventili z ročnim kolesom kazalnik temperature merjenje tlaka okvir iz nerjavečega jekla (stranska zaščitna obloga za vroče cevi in armature) cevi in prirobnice iz nerjavečega jekla (samo za termično postajo za regulacijo)

Leto izdelave: 2024, stanje: novo, FOR SALE: New WLO 50 KW Hot Air Furnace, Workshop Stove, Wood Stove Technical Specifications of the Furnace - Nominal heating output: 44.50 kW - Maximum heating output: 50.00 kW / approx. 300 m² - Included in set: powerful axial fan, speed: 1350 rpm, airflow: 5060 m³/h - Included in set: driver/controller - Innovative air jacket design completely encases the furnace for maximum efficiency - Indestructible furnace made entirely from certified P265GH and 16Mo3 boiler steel sheets, thicknesses #6mm and #10mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 330 kg - Gross weight: 340 kg - Furnace lining: 40 fireclay bricks - Two large removable cast iron grates 300 x 200 mm - Coated with certified heat-resistant paint for corrosion protection and aesthetic appearance - Heavy-duty construction - Large combustion chamber - Large loading door - User manual included - Efficiency: 75.00 % - CO emission at 13% O₂: 1.20 m - Recommended fuel: seasoned hardwood with moisture content ≤ 20%, briquettes, coal only as an additive up to max. 10% Safety and Certifications - CE marking: YES / included on the type plate - Conformity to standard: EN13240: 2006 - BimSchV Stage 2: Yes Dimensions - External dimensions: total width: 580 mm x total depth: 1290 mm x total height: 1310 mm - Firebox dimensions: width: 480 mm x depth: 930 mm x height: 680 mm - Upper door dimensions (3 & 4 mm steel): width: 390 mm x height: 330 mm - Middle door dimensions (3 & 4 mm steel): width: 390 mm x height: 150 mm - Lower door dimensions (3 & 4 mm steel): width: 390 mm x height: 150 mm - Upper loading opening: width: 315 mm x height: 310 mm - Middle/bottom loading opening: width: 315 mm x height: 130 mm - Cast grate dimensions: width: 210 mm x depth: 300 mm - Hot air outlet diameter: Ø 150 mm - Exhaust outlet diameter: Ø 150 mm - Leg height: 140 mm Fan Technical Specifications Chodpfxjixup Ao Anusc - Fan type: axial blower - Material: steel (impeller + housing) - Diameter: Ø 450 mm - Power supply: 230V / 50Hz - Motor: 4P - Current draw: 0.82A - Speed: 1350 rpm - Airflow: 5060 m³/h - Safety: CE mark + protection grid

Leto izdelave: 2023, stanje: novo, For sale: WLO 25 kW hot air furnace, workshop stove, wood stove, hall heater Technical specifications of the stove • Rated heating output: 25.00 kW • Maximum heating output: 30.00 kW / approx. 300 m² • Included: forced axial fan, speed: 1400 rpm, capacity: 3110 m³/h • Included in set: driver • Innovative air jacket design completely surrounds the unit for maximum efficiency Chjdpfx Aoixupmjnuec • Indestructible furnace made entirely from P265GH and 16Mo6 certified boiler plates, thicknesses #6mm and #10mm • Large exhaust deflector reduces fuel consumption by up to 30% • Energy efficiency class: A • Energy efficiency index: 110 • Net weight: 230 kg • Gross weight: 240 kg • Furnace lining: 15 chamotte bricks • Two removable large cast iron grates 300 x 200 mm • Coated with certified heat-resistant paint for corrosion protection and an aesthetic appearance • Heavy-duty construction • Large combustion chamber • Large loading door • User manual • Efficiency: 75% • CO emission at 13% O₂: 1.20m • Fuel type: recommended dry hardwood with a moisture content ≤20% * mg/Nm³; briquettes, coal permissible as admixture up to 10% Safety and certifications • CE marking: YES / on type plate • Compliance with standard: EN13240:2006 • BImSchV Stage 2: Yes Dimensions • External dimensions: Total width: 485 mm x total depth: 900 mm x total height: 1310 mm • Hearth dimensions: Width: 390 mm x depth: 460 mm x height: 540 mm • Upper door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 230 mm • Middle door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 155 mm • Lower door dimensions (3mm and 4mm sheet metal): Width: 390 mm x height: 150 mm • Upper loading opening: Width: 310 mm x height: 210 mm • Middle/bottom loading opening: Width: 310 mm x height: 130 mm • Cast iron grate dimensions: Width: 210 mm x depth: 300 mm • Hot air outlet diameter: Ø 150 mm • Exhaust outlet diameter: Ø 130 mm • Leg height: 140 mm Technical specifications of the fan • Fan type: Axial blower • Material: Steel (propeller + housing) • Diameter: Ø 350 mm • Power supply: 230V / 50Hz • Motor: 4P • Current consumption: 0.58 A • Speed: 1400 rpm • Airflow: 3110 m³/h • Safety: CE mark + protection grid

Leto izdelave: 2024, stanje: novo, For sale: WLO 20 kW Warm Air Furnace, Workshop Stove, Wood Stove, Hall Furnace Technical Specifications of the Stove Nominal heating output: 20.00 kW Maximum heating output: 23.00 kW / approx. 230 m² Included: high-performance axial fan, speed: 1380 rpm, capacity: 2910 m³/h Set includes: driver Innovative air jacket design fully encasing the stove for maximum efficiency Indestructible combustion chamber made of 5 mm thick boiler steel Large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 160 kg Gross weight: 180 kg Stove lining: 12 fireclay bricks Interchangeable large cast iron grate Coated with certified heat-resistant paint that protects against corrosion and provides an attractive appearance Robust construction Large combustion chamber Large loading door User manual included Efficiency: 75.00% CO emissions at 13% O₂: 1.20 m Fuel type: recommended seasoned hardwood with a moisture content ≤20%, briquettes, coal only as an additive up to 10% Safety and Certifications CE marking: YES / indicated on the nameplate Compliance with standard: EN13240: 2006 BimSchV Stage 2: Yes Dimensions External dimensions: Total width: 485 mm x Total depth: 790 mm x Total height: 1030 mm Firebox dimensions: Width: 380 mm x Depth: 450 mm x Height: 500 mm Upper door dimensions (3 and 4 mm sheet metal): Width: 365 mm x Height: 215 mm Lower door dimensions (3 and 4 mm sheet metal): Width: 365 mm x Height: 295 mm Upper loading opening: Width: 285 mm x Height: 195 mm Lower loading opening: Width: 285 mm x Height: 265 mm Cast iron grate dimensions: Width: 210 mm x Depth: 300 mm Hot air outlet diameter: Ø 120 mm Cjdpfx Anoixun Toushc Exhaust outlet diameter: Ø 130 mm Leg height: 140 mm Fan Technical Specifications Fan type: Axial blower Material: Steel (impeller + housing) Diameter: Ø 300 mm Power supply: 230V / 50Hz Motor: 4-pole Current draw: 0.30 A Speed: 1380 rpm Air flow: 2910 m³/h Safety: CE mark + protective grille

Leto izdelave: 2023, stanje: novo, For sale: New WLO 4 35 kW Warm Air Heater, Workshop Stove, Wood Stove, Hall Heater Technical Specifications of the Heater Nominal heating capacity: 30.00 kW Maximum heating capacity: 35.00 kW / approx. 300 m2 Included: powerful axial fan, fan speed: 1350 rpm, capacity: 3500 m3/h Included: Fan controller Innovative air jacket design completely surrounds the stove for maximum efficiency Robust construction, entirely made of P265GH and 16Mo6 certified boiler steel plates, thicknesses #6mm and #10mm Large flue deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 290 kg Gross weight: 310 kg Firebox lining: 28 refractory firebricks Removable two large cast iron grates 300 x 200 mm Coated with certified heat-resistant paint for corrosion protection and attractive appearance Heavy-duty structure Codpfx Anjixupusujhc Large combustion chamber Large loading door User manual Efficiency: 75.00% CO emission at 13% O2: 1.20 mg/Nm3 Fuel type: recommended seasoned hardwood with moisture content ≤20%, briquettes, coal only as an additive up to 10% Safety and Certifications CE marking: YES / on the type plate Conformity to standard: EN13240:2006 BimSchV Stage 2: Yes Dimensions External dimensions: Total width: 580 mm x Total depth: 950 mm x Total height: 1310 mm Firebox dimensions: Width: 480 mm x Depth: 580 mm x Height: 560 mm Upper door dimensions (3 and 4 mm sheet): Width: 390 mm x Height: 230 mm Middle door dimensions (3- and 4-mm sheet): Width: 390 mm x Height: 155 mm Lower door dimensions (3- and 4-mm sheet): Width: 390 mm x Height: 150 mm Upper loading opening dimensions: Width: 310 mm x Height: 210 mm Middle and lower loading opening dimensions: Width: 310 mm x Height: 130 mm Cast grate dimensions: Width: 210 mm x Depth: 300 mm Hot air outlet diameter: Ø150 mm Exhaust outlet diameter: Ø150 mm Leg height: 140 mm Technical Specifications of the Fan Fan type: Axial fan Material: Steel (impeller + housing) Diameter: Ø400 mm Power supply: 230V / 50Hz Motor: 4P Current consumption: 0.82 A Speed: 1350 rpm Airflow: 3500 m3/h Safety: CE mark + protective grid

Leto izdelave: 2024, stanje: novo, For sale: New WLO -15 KW Warm Air Heater, Workshop Stove, Wood-burning Stove Technical Parameters of the Stove: Nominal heating output: 12.00 kW Maximum heating output: 15.00 kW / approx. 150 m² Includes: Forced axial fan with speed: 1400 rpm and capacity: 1460 m³/h Chedoixul Hopfx Anusc Innovative air jacket design completely surrounds the stove for maximum efficiency Extremely durable stove made entirely from P265GH and 16Mo3 certified boiler plate steel, thicknesses: 6mm and 10mm Large exhaust deflector reduces fuel consumption by up to 30% Energy efficiency class: A Energy efficiency index: 110 Net weight: 80 kg Gross weight: 100 kg Interchangeable large cast iron grate Coated with certified heat-resistant paint to provide corrosion protection and an aesthetic finish Heavy-duty construction Large combustion chamber Large loading door User manual included Efficiency: 75.00 % CO emission at 13 % O₂: 1.20 mg/Nm³ Recommended fuel type: Seasoned hardwood with moisture content ≤20%, briquettes, coal only as an additive up to 10 % Safety and Certifications: CE marking: YES / marked on the nameplate Standard compliance: EN13240: 2006 BimSchV Stage 2: Yes Technical Parameters of the Fan: Type: Axial fan Material: Steel (impeller + housing) Diameter: Ø 250mm Power supply: 230V / 50Hz Motor: 4 pole Current consumption: 0.30A Speed: 1400 rpm Airflow: 1460 m³/h Safety: CE marking + protective mesh

Leto izdelave: 2023, stanje: novo, For sale: NEW WLO Octagon 49.5 kW Hot Air Furnace - Workshop Heater, Wood Stove, Industrial Space Heater Thanks to its powerful combustion chamber, this stove can accommodate logs up to 120 cm in length! Technical Specifications: - Rated thermal output: 49.5 kW (suitable for approx. 450 m²) - Includes: Axial fan with 1380 rpm and capacity: 5500 m³/h - Supplied with: Controller for operation of SCL-1515 fan - Innovative air jacket design fully surrounds the stove for maximum efficiency - Indestructible construction – entirely made from certified boiler plate steel P265GH & 16Mo6, thickness: 6 mm - Large exhaust deflector reduces fuel consumption by up to 30% - Energy efficiency class: A - Energy efficiency index: 110 - Net weight: 320 kg | Gross weight: 340 kg - Grate size: 1000 x 250 mm - Coated with certified heat-resistant paint for corrosion protection and aesthetic appeal - Heavy-duty construction - Massive combustion chamber: 120 x 80 cm! - Large loading door - User manual included - Efficiency: 75.00% - CO emissions at 13% O2: 1.20 m mg/Nm³ - Recommended fuel: Seasoned hardwood with ≤20% moisture, briquettes, coal only as an admixture up to 10% Safety and Certifications: - CE marking: YES / attached to type plate - Conforms to standard: EN13240:2006 - BimSchV Stage 2: Yes Dimensions: Cedpfx Anjixuq Djushc - External: Width: 800 mm x Depth: 1600 mm x Height: 1200 mm - Stove body: Width: 800 mm x Length: 1200 mm x Height: 800 mm - Upper door (3 & 4 mm steel): Width: 520 mm x Height: 470 mm - Lower door (3 & 4 mm steel): Width: 360 mm x Height: 150 mm - Upper loading opening: Width: 460 mm x Height: 460 mm - Lower opening: Width: 360 mm x Height: 130 mm - Grate: Width: 250 mm x Depth: 1000 mm - Hot air outlet diameter: Ø 150 mm - Flue outlet diameter: Ø 200 mm - Leg height: 140 mm For further information or to arrange a viewing, please contact us.

Stanje: rabljeno, električno ogrevan Ogrevanje je mogoče ločeno uravnavati v dveh conah brezstopenjska nastavitev hitrosti širina tira 600 mm odsesavanje pare z elektromehaničnim dvižnim sistemom primerno za injekcijo pare (ogrevanje, povečanje proizvodnje) 180 kW / 275 A primerno za sistem čiščenja »CIP« zunanja mera (D x Š x V): ± 8.800 x 2.000 x 3.200 mm z lecitično kadjo Cedpfxezx Urcj Anuehc priključek za paro DN 40 v dobrem stanju Popolnoma mehansko obnovljeno: nove ležaje, verige, tesnila, drsne puše, zobniki, ... vsi (motorizirani) pogoni so bili obnovljeni ali zamenjani pokrov in kad sta bila popolnoma na novo izolirana nova mreža za pečenje, standardne mere za prigrizke vsi deli, ki so občutljivi na obrabo, so bili zamenjani ali popolnoma obnovljeni splošno čiščenje, obnova in kontrola konstrukcije Popolnoma električno obnovljeno + posodobitev omarice in krmiljenja: vse električne komponente in kabli so bili zamenjani konvencionalno upravljanje s tipkami s temperaturnim PID-regulatorjem Jumo nove električne sheme (E-plan) novi senzorji označevanje komponent in kablov nove električne grelne upornike: novi, upognjeni grelni uporniki popolnoma na novo ožičeno električno testirano, ogreto in preverjeno

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar Cedpfjvz Hq Tjx Anuehc - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: rabljeno, completely stainless steel suitable for thermal oil heating 210 kW thermal capacity roasting length 3,000 mm track width 1,000 mm variable speed infeed and outfeed conveyor insulated lid 10 kW dirt removal system filter Cjdpfxjz Ixxvo Anujhc low-high oil level control oil circulation pump suitable for CIP cleaning electric lifting device dimensions (L x W x H): approx. 6,650 x 2,300 x 3,500 mm

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm Chedpfx Ajvz Hq Honusc - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2026, Furnace output: 49 kW Working output: 45 kW New device, original packaging: Yes Warm air blower, flue gas blower, electronic controller with digital display: included Fresh air filter, recirculation intake filter: large-area intake filter without performance loss / included Warm air distribution ducts: 2 x 200 mm with plug-in, freely rotating 90° elbows Flue diameter: 180 mm Csdpfxepn Nyze Anuohc Furnace chamber length: 660 mm Furnace chamber width: 480 mm Furnace chamber height: 600 mm Air delivery: 3,500 m³/h Intake air filter: Yes, large-area filter without performance loss Power consumption: 550 W Designed for room volume: 1,000 m³ Weight: 310 kg

Stanje: novo, Leto izdelave: 2026, Furnace output: 34 kW Working output: 29 kW New device, original packaging: Yes Warm air blower, flue gas fan, and control panel with digital display: included Warm air distribution pipes: 2 x 180 mm with 2 freely rotatable, plug-in bends Intake/air filter: large-surface fresh air filter with no loss of performance / included Flue outlet diameter: 160 mm Combustion chamber length: 500 mm Combustion chamber width: 400 mm Csdpfxjpkwhqs Anuohc Combustion chamber height: 590 mm Air delivery: 2200 m³/h Power consumption: 400W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air pipes: 1560 mm Stove width: 550 mm Stove length without flue gas fan: 920 mm Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar Cjdpfx Anevz Hqyjushc - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm Chsdpevz Hhxofx Anuec - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: novo, Leto izdelave: 2026, Fire chamber output: 34 kW Working output: 29 kW New device: yes, originally packed Cedpfek Utraex Anuehc Warm air blower, flue gas blower, and control unit with digital display: included Warm air ducting pipes: 2 x 180 mm with freely rotatable plug-in 90° bends Flue outlet diameter: 160 mm Fire chamber length: 500 mm Fire chamber width: 400 mm Fire chamber height: 590 mm Air delivery rate: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air ducting pipes: 1560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Weight: 190 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Dvojbobenska spiralna vroča zračna peč neposredno iz zaprte tovarne McDonald's, uporabljena za predkuhanje burgerjev in nuggetsov. Ti stroji so namenjeni visokokapacitetnemu pečenju, žaru in soparjenju najrazličnejših izdelkov; stopnja priprave je določena s temperaturo zraka, hitrostjo zraka, zračno vlažnostjo in časom, ki ga izdelek preživi v sistemu. Električno ogrevana. Trak 96 m x 600 mm. Uporabljena od leta 2007 do 2016, ko se je pogodba preselila v drugo tovarno. Stroj je v odličnem stanju, na voljo imamo tudi vse ostale stroje iz tovarne – oblikovalce, cvrtnike, stroje za paniranje, filtre, spiralne zamrzovalnike, pakirne linije itd. Prosimo, upoštevajte, da fotografije verjetno prikazujejo dve različni peči, obe sta si zelo podobni. Chodpfox Altfox Anusc

Stanje: novo, Leto izdelave: 2026, Nominal combustion chamber output: 49 kW Operational output: 45 kW New unit, original packaging: yes Warm air blower, flue gas blower, digital control display: included Warm air distribution ducts: 2 x 200 mm with freely rotatable plug-in bends Flue outlet diameter: 180 mm Combustion chamber length: 660 mm Combustion chamber width: 480 mm Combustion chamber height: 600 mm Chodpfx Ajk Utrdjnuoc Air delivery: 3500 m³/h Power consumption: 550 W Designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without warm air ducts: 1750 mm Stove width: 700 mm Stove length without flue gas blower: 1150 mm Weight: 305 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm Chodpjvz Hqgsfx Anuec - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2026, Furnace output: 510 kW Effective output: 407 kW New equipment, original packaging: Yes Cjdpok Utrwofx Anuehc Flue outlet diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heatable area: 1,800 m² Furnace height without hot air ducts: 3,000 mm Furnace width: 1,220 mm Furnace length without flue gas fan: 2,700 mm Weight: 1,575 kg

Stanje: novo, Leto izdelave: 2026, Combustion chamber output: 175 kW Working output: 140 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 250 mm Combustion chamber length: 950 mm Combustion chamber width: 600 mm Combustion chamber height: 860 mm Air delivery: 8,900 m³/h Power consumption: 3,500 W Codpfx Ansk Utrpjuehc Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Oven height without air distribution ducts: 2,200 mm Oven width: 930 mm Oven length without flue gas fan: 1,700 mm Weight: 615 kg

Stanje: novo, Leto izdelave: 2026, Furnace output: 125 kW Operating output: 99 kW Flue outlet diameter: 180 mm Warm air distribution ducts: 2 x 250 mm Combustion chamber length: 750 mm Combustion chamber width: 560 mm Combustion chamber height: 700 mm Csdpfjk Utrhox Anujhc Air delivery: 6,300 m³/h Power consumption: 1,500 W Designed for room volume: 1,500 m³ Area to be heated: 300/350 m² Stove height without warm air ducts: 1,980 mm Stove width: 800 mm Stove length without flue gas fan: 1,280 mm Weight: 415 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Chsdpfx Aevz Hqmsnuoc Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.