Faymonville Max Trailer Max510 Tiefbett 2X12 T Pa nakup rabljenega (90.744)

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Bjdpfjxbmn Uex Akrsdc Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: Bedpfx Akexarl Nsrjdc - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Bdsdpfx Aksxf Silorec Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: rabljeno, največja dovoljena obremenitev: 36.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, skupna širina: 2.550 mm, Oprema: ABS, Our entire vehicle inventory, including immediately and soon available vehicles, can be found on our website. Partial list of equipment. Full equipment details available upon request. Gooseneck: Bodpox Uvlljfx Akrjdc * Gooseneck in SNT design to optimize platform length, approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 25,000 kg * Suitable for tractors: 4x2, 6x2, and 6x4 Lowbed: * Lowbed designed as a telescopic vessel bridge in low-profile construction with front extension and mechanical locking * Length x width approx. 6,850 mm x 2,540 mm * Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length Axles and Suspension: * PENDLE AXLE * All axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders fitted with shut-off valves and quick-connect pins for securing in raised position * Technical axle load: 12,000 kg per axle * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed outer frame, checker plate cover, continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear Braking System: * WABCO EBS-E braking system compliant with EU regulations, without connection cable to tractor unit Paintwork: * Trailer color: RAL 3002 Carmine Red Included Accessories: * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power pack for hydraulic functions (excluding hydraulic winches; supply connection installation to the tractor not included) * Outer beams of the gooseneck with mounting holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear inclination of the gooseneck (LC 6,000 daN) * 2” king pin * One locking point approx. every 500 mm on the extension * 1 pair of steel ramps with climbing strips and locking bolts for bridging the deep-bed hook supports * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the platform * Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the platform (LC 10,000 daN) on the top flange of the outer beams * Recesses above the lashing rings * 1 hanging lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outer beams of the platform * Preparation for removable load floor * Hook-in rail at the front of the rear chassis to the lowbed for loose approach ramps * Chassis with chamfered corners at the rear * Hook-in rail for loose aluminum approach ramps at the rear traverse of the vehicle * Remote steering from front and rear via cable remote control with pushbuttons, axle tracking control, no installation in the tractor unit * Mechanical pin-tab coupling from lowbed to chassis for deck change or addition of extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 2 axle load gauges installed on the left side Including special accessories: * 1 pair of detachable anodized aluminum side walls on the gooseneck, approx. 400 mm high * A

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment specification. Full equipment details available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings on the exterior (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center of the gooseneck (LC 10,600 daN) * Suitable for tractor units 6 x 4 or 8 x 4, 2-axle Compact front bogie: * Hook coupling front and rear, length approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over deck hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear bogie: * Mechanical pin-eye coupling at the front for connecting a low-bed trailer * Rear end cross member, bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Oscillating axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: 8 x (manufacturer’s choice; M+S) 285/70 R19.5 * Rear bogie: 16 x (manufacturer’s choice; M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted after welding using a turbine blasting unit. Second abrasive blasting with corundum for optimum coating adhesion * Full chassis HRM-metalized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating in 2 layers of 2-component top coat, single color in RAL 3002 carmine red, according to RAL 841GL system Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side panels and rear wall on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow controller (20 l/min) * Overhead support for supply lines; tractor unit tank must hold at least 80 l * With MAX Trailer coupling pieces; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for 2-axle bogie with standard grease NLGI-2 * One 7-pin socket each left and right at the rear of the front bogie for warning panels * Threading option (ø approx. 40 mm) every approx. 500 mm on the outside of the top flange of the excavator deck outer tube for screw rings (LC 16,000 daN) * Foldable extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm Bdodpfjxbmplox Akrec * BEKA-MAX centralized lubrication for 4-axle bogie with standard grease NLGI-2 * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right * Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine * Operation of the rear steering, in addition to cable remote control * One LED work spotlight each left and

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear Bdodpfxjw Tgp Dj Akroc * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: novo, največja dovoljena obremenitev: 91.640 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook connection front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 430 mm, beam width: approx. 1,350 mm * Load height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical pin-lug coupling for attaching a lowbed at the front, end traverse at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically force-steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and retaining pins for securing in lifted position * Final coating of axles with 2 coats of 2C paint, solid colour in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tyres rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) guaranteeing optimal corrosion protection * Final coating with 2 coats of 2K paint, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU sideboards and tailboard, approx. 400 mm high, anodized, for installation on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication for a 3-axle chassis * One 7-pin socket left and right at the rear of the front bogie for warning plates Bedpfjuvbdtjx Akrjdc * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the upper flange of the outer tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * The steel mats can be inserted in 2 positions to create a lowered loading area. Please refer to the respective load diagram for the load capacity, depending on extension width * Steel mats with rubber covering approx. 12 mm thick * One 7-pin socket left and right, front and rear on the rear bogie for warning plates * BEKA-MAX central lubrication for a 5-axle chassis * Rear bogie with socket for cable remote control for steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). Bdodpfoizu Nwex Akrec 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Platform with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching lashing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axle: * BPW axles and suspension * All axles hydro-mechanically force-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Bdodsw Tpr Ispfx Akroc Electrical system: * Electrical installation according to EU regulations * LED lighting, 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets, connections according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically blasted after welding using a wheel blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * Final coat with 2 layers of 2K topcoat, in a single colour RAL 3002 Carmine Red conforming to RAL system 841GL * Rims in silver grey * Rear end metallised and painted RAL 9010 (Pure White) * No metallic paint possible * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, axle single-track control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * At the galvanised connection panel at the front, yellow-red air line couplings * At the gooseneck and rear left and right, one holder each for warning panels, including socket * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container lock pockets in the platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container; the extension includes an additional locking point for a 45' container * 4 pairs of crosswise stanchion pocket bars in the platform, for plug-in stanchions approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stanchions bolted to the inside of the front bulkhead * Access ladder mounted front left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the platform on the

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) Bdedpfx Akov Etx Eerec * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, skupna širina: 2.480 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Complete configuration upon request. Gooseneck: * Gooseneck with rear bevel, approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick loading area; loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings on the front central beam (LC 10,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of ca. 20 x 20 cm) over axles with checker plate covering Two-piece steel ramps: * One pair of galvanized, two-piece reinforced steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating floor C40/5 (point load approx. 8 t on an area of ca. 20 x 20 cm) * Ramp with hydraulically folding and retractable ramp sections and hydraulic lifting device, max. load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards the vehicle length of 16,500 mm in driving position Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 fixed axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Colours: * Semi-trailer RAL 3002 carmine red * Rims silver * Tarpaulin in RAL 9006 silver Incl. accessories: * 1 spare wheel holder under the load bed, right hand side * 2-inch kingpin * Galvanized steel front wall * Yellow-red air couplings at the front galvanized connection rail * 4 wheel chocks with holder at the front wall * 3 heights of wooden planks * Galvanized folding supports under the loading area bevel * Height-adjustable tarpaulin body, approx. 3,960 mm * Galvanized front wall with a tensioning system for sliding curtains * Roof by EDSCHA, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear wall) * 3 pairs of movable stakes/restraining pillars in the load bed * Structure at the rear can be hydraulically widened to the left and right by approx. 750 mm * Sliding tarpaulin with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height * Upper edge of the body approx. 3,960 mm (loaded) * Driving with open sliding roof is not permitted and will damage the tarpaulin * Non-slip sand coating painted on checker plate sheets on the gooseneck and load bed * Cover plates to bridge the gap between the ramps and loading area Bdedpfsy Nu Hkex Akrsc * Electro-hydraulic unit mounted at the rear under the load bed * Mounting brackets for warning signs on both sides of the gooseneck and ramps, including socket * Control valves for the ramps on the right side of the semi-trailer * Grating floor C30/3 in the bevelled area of the gooseneck (point load approx. 2 t on a 20 x 20 cm area) * Grating floor in the bevelled area of the loading a...

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete specification available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Bodpfx Akjy Aug Djrjdc Landing Gear: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 205/65 R17.5 tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Axles: * BPW axles, two rigid and two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually Brake system: * WABCO brake system compliant with EU regulations and EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel structure made of high-strength fine grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Trailer colour RAL 3002 Carmine Red * Rims Silver Grey * Tarp RAL 9006 (brilliant direct) Options included: * At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket * 2-inch king pin * One galvanized steel front wall * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder on the front wall * 3 tiers of wooden boards * Galvanized folding supports under the loading area bevel * One bracket for a revolving warning light at the rear end of the trailer * Height-adjustable curtain structure – approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm * Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall) * 3 pairs of movable stanchions in the loading area * Body hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will damage the tarp * Body at the rear closed with anodized ALU swing doors * Latch-on rail for ALU loading ramps at the rear of the vehicle * Control valves for hydraulic widening fitted to the right-hand side of the trailer * White reflective tape as per EU regulations on the sides, red at the rear * Electro-hydraulic unit under the rear loading area * One mudguard at the rear of the trailer * European reflective signs (red-yellow) at the rear of the trailer * Hand…

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable Bedpfx Akoy Augweredc * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel Bjdpfey Auhuex Akrodc * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) Bdedpfxjy Aufmj Akrjc * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel Bdjdpfsg Sk T Dex Akrsc S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, največja dovoljena obremenitev: 36.245 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available immediately and on short notice, can be found on our website. Extract from the specification. Full equipment details available on request. Loading Area: * Loading area with hardwood floor and rear bevel approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) Bdsdoyvnfaspfx Akroc * 6 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for fastening straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspension, disc brakes (approx. 377 mm), lift/lower function (ET 120) * Axle tool kit Tyres: * Tyres: 435/50 R 19.5, brand of our choice * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via standardised EBS interface according to ISO 11992. For proper display, the truck must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction: * Steel structure made from high-tensile fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicators * ASPÖCK-UNIBOX at the front connection bar with sockets 24N, 24S & 15-pin connector as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding with a wheel blasting machine Second abrasive blasting with corundum for optimal coating adhesion * HRM metal plating of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of two-component finish, single-colour in RAL 3002 Carmine Red as per RAL system 841GL * Rear metal-coated and painted in RAL 9010 (Pure White) * Paint structure tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment: * Yellow-red air couplings on the galvanised connection bar at the front * 4 wheel chocks with holder * 2-inch king pin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the loading area, right-hand side * Galvanised folding supports under the rear loading area bevel * 9 pairs of stake pockets for insertable stanchions, approx. 100 x 50 mm, in the outer frame of the loading area * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip sand coating painted on the centre beam * 1 INOX toolbox transverse under the loading area, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the loading area, for 1x 20' container, 2x 20' containers, or 1x 40' container * 3 pairs of transverse stake pocket rails mounted in the loading area, for insertable stanchions approx. 100 x 50 mm * Storage for max. 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 2 INOX toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the loading area, behind the axles * One beacon light supplied

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: Bedpfx Aoyvnfgekrodc * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: rabljeno, največja dovoljena obremenitev: 44.420 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 11.500 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment. Complete equipment details on request. Loading platform: * Loading bed with approx. 30 mm thick hardwood floor * 9 pairs of folding lashing rings towards the outside (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm Landing gear / Support legs: * Hydraulic landing gear Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is carried out via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical capacity 10,000 kg each, first axle hydro-mechanically steered, second axle fixed, and third axle hydro-mechanically forced-steered, mounted on turntable * Air suspension with raise/lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Bsdpfx Akoyu Eu Ierodc Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: * Entire steel construction shot-blasted automatically after welding using a turbine blast machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Jet Black as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Coating tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Included accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * DUOMATIK air couplings at the galvanized connection rail at the front * Storage for approx. 1,000 mm plug-in stakes, rear in the central beam * On the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket * White reflective tape in accordance with EU regulations on the sides and red at the rear * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform * European reflective plates (red-yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * Manual and description on USB stick * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump cover * 4 wheel chocks with holder on the front wall * Steering from the front and rear via cable remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stake pocket bars mounted in the loading plat

Stanje: novo, največja dovoljena obremenitev: 45.820 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt of features. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of externally foldable lashing rings (LC 5,000 daN) * 3 pairs of externally foldable lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the platform for fastening straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, with chequer plate above the axles Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Tyres: * Tyre size 245/70 R 17.5 3PMSF, load index (146/146 F) * Brand at our discretion * TPMS tyre pressure monitoring system as per ECE R 141 * Data transmission to truck tractor via standardized EBS interface according to ISO 11992 * For correct display, the tractor must support the transmission and display of this data Bedpfjxbmpfjx Akrjdc Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Braking system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M) without connections to the tractor unit Paintwork: * Complete steel structure, automatically shot-blasted after welding using a turbine system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 coats of 2K topcoat, solid colour in RAL 3002 Carmine Red as per RAL System 841GL * Wheels in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * No metallic paint available * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin. Connections in accordance with ISO: * 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connector rail * Electro-hydraulic power pack * Remote steering of axles from the front and rear via cable remote control with push buttons, single-track alignment control (no installation in the tractor unit) * Galvanized folding supports under the rear slope of the loading platform * 1 pair of recessed lashing rings along the central beam at the rear in the sloped section (LC 10,000 daN) * On the gooseneck, plug-in aluminium side and rear panels, approx. 2,440 x 400 mm (L x H) * Rear removable galvanized stanchions (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the sloped gooseneck section * 3 pairs of WADER container pockets in loading area for a 20' (30?) or

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Bdjdpfx Aoyhkq Uokrsc Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable Bdjdpfoyhkrrox Akroc * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) Bodpfx Akoyhkqzerodc * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * Tyres 205/65 R 17.5 twin-mounted Bdsdpfx Ajx Uvlrjkrsc Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram

Stanje: novo, največja dovoljena obremenitev: 25.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Full specification available upon request. Bdedsv Sw E Aspfx Akrec Gooseneck * Gooseneck in SNT design to optimize loading area length * Length approx. 3,750 mm, hydraulically lift-/lowerable, as well as detachable * Technical fifth-wheel load: 25,000 kg For tractors: 4 x 2 and 6 x 2 Kessel bridge * Low bed designed as telescopic Kessel bridge SUPER LOW design * Length approx. 6,850 mm * with mechanical locking * Supply lines are routed protectively within the telescopic beams and automatically adjust to the respective low bed length Rear chassis * Short version with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twinned. Load index 143/141J (146/146F) Brake system * WABCO brand, EBS-E according to EU regulations, WITHOUT connection cable to tractor unit Paintwork * 6-coat final treatment * Complete steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 layers of 2K (acrylic) paint, single colour, then cavity sealing with special wax Trailer colour * RAL 3002 Carmine red * Rim colour: silver-grey * Side wall colour: Aluminium-natural Accessories included * Steel front wall, plug-in, approx. 400 mm high * 3 kW electro-hydraulic pump unit for hydraulic operation, except for hydraulic winches. Without installation of supply connectors at the tractor unit * Mounting adapter for 1 spare wheel in front of the gooseneck front wall * Outer beams of the gooseneck with mounting holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2 inch kingpin * Hydraulic traverse for supporting the gooseneck on the tractor or a dolly * Air connection with air pistol on the gooseneck * 1 pair of steel ramps with climbing cleats and retaining bolts to bridge the low bed attachment hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * At the outer beams of the loading area, prepared for removable loading floor * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the inside outer beams of the loading area * Lashing rings with retaining spring approx. every 1,200 - 1,300 mm on the outermost beams of the loading area (LC 10,000 daN) * Cut-outs over the lashing rings on the upper flange of the outer beams * Mechanical pin-lug coupling from the low bed to the running gear, for changing the loading area or installing extension beams. With electro-pneumatic-hydraulic couplings * Outer beams of the low bed with painted-on sand layer for anti-slip protection * 2nd driving height for upper drive position, max. ± 50 mm from the normal driving position, without installation of controls from the tractor unit * 1 pair of lashing rings with retaining spring at the transition from low bed to excavator recess (LC 10,000 daN) * Front and rear chamfered edge