Cts Temperaturschock-Prüfschrank Toplo: +50°C / +200°C Hladno: -80°C / +100°C nakup rabljenega (97.069)

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Kdsdpfx Aey Hkd Hokael Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of manufacture: 10/2017 Design: Temperature shock test chamber Refrigeration unit: water-cooled Description Used temperature shock test chamber by CTS. Suitable for shock and cyclical temperature testing. Ideal for applications in industry, research, and quality assurance. Applications - Materials testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and QA Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Kjdpfxjy H Hk Aj Akaedl Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Features - Touchscreen control - Microprocessor controller - Programmable operation - Digital setpoint/actual value display - 2-zone system - Movable test basket for rapid transfer - Viewing window - Integrated control cabinet - Cooling water connections Technical Configuration - Separate hot and cold chambers - Stainless steel test chamber - Industrial-grade construction Dimensions External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Wiring diagram and piping schematic - Spare parts list Pre-Delivery Service (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. See photos for visual condition. Scope of Delivery - TSS-70/350-A test chamber - Documentation (as available) Note Used equipment, sold without warranty. Inspection by arrangement possible. Loading and transport can be organized upon request. Technical modifications and prior sale subject to change. Please contact us if you have any questions.

Stanje: zelo dobro (rabljeno), CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and cyclic temperature testing Technical data: Type: TSS-70/350-A Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -70°C to +100°C Electrical data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 20.4 kW - Rated current: approx. 36.5 A Refrigeration system: - Refrigerant: R404A / R23 - Pre-cooling stage: approx. 6.0 kg - Cooling stage: approx. 3.0 kg - water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital display of set and actual values - 2-zone system (hot and cold chambers) - Automatic specimen carrier for shock tests Technical specification: - Hot and cold chambers separated - Carrier system for rapid temperature change - Test space made of stainless steel - Shelf / wire rack - Viewing window in the door - Water cooling connections available - Integrated control cabinet Dimensions: - External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm - Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm - Weight: approx. 2500 kg Additional data: - Protection class: IP 54 - Operating overpressure: approx. 25 bar - Test pressure: approx. 27.5 bar Safety information for buyers: The following procedures are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: see pictures (Specifications subject to change and errors reserved!) For further questions, feel free to contact us by phone. Kdedpfxoy Hkgbo Akajl

Stanje: zelo dobro (rabljeno), CTS Temperature Shock Test Chamber Model: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS temperature shock test chamber for thermal cycling and shock testing in industrial, research, and development settings. Technical Data: Test chamber volume: approx. 32 liters Maximum specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature transition rate: up to approx. 100 K/min Transition time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Nominal power: approx. 9.7 kW Nominal current: approx. 15.4 A Fusing: 16 A slow-blow Kedpfx Akey I Ntcsajdl Protection class: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: Approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: Approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" male thread Equipment: Two-chamber system (hot / cold chamber) Digital CTS controller Display / control panel Program operation Operating hours counter Viewing window Internal lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick instruction available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as shown in the pictures Scope of delivery as depicted Inspection by appointment is possible. Loading can be arranged. Commercial sale. Sale without warranty. (Subject to changes and errors)

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 The type designation of the CTS chamber series is structured as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for lithium-ion battery testing Control: 32-bit controller LCD control panel Ksdpfx Ajvba Raokaodl Digital display of setpoint and actual values Numerical input of setpoints Error messages in clear text Ethernet interface RS 232 interface Free switching channels for external specimen control Test Chamber Lighting: Energy-efficient, high-intensity LED light strip mounted on the door Rack: Stainless steel, load surface 970 x 980 mm Maximum load per rack: 35 kg Total load with maximum rack assembly: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Tests: Temperature range -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without thermal compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1 m front distance) Weight: approx. 1000 kg Heat dissipation to ambient: 10.4 kW Refrigeration Unit: Water-cooled, low-noise, fully hermetic overall stepless power adjustment via electronic monitoring and control system environmentally friendly refrigerants R404A/R23 For your safety as a buyer—the following will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by telephone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/1000-S Equipment Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Version: Climate test chamber / Environmental simulation chamber Cooling: Water cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability tests. Applications in industry, research, development, and quality assurance. Temperature and Climate Data Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% relative humidity Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control unit with LCD display Program mode Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / temperature limiter Interior lighting Side cable ports Feedthroughs approx. 50 mm and 125 mm RS232 interface as per documentation Digital outputs for test specimen control Mobile design on casters Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating manual Notifications and digital channels Site plan Quick reference guide Humidity diagram Scope of Delivery CTS climate test chamber C-70/1000-S Documentation as available Scope of delivery as shown Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in pictures. Note Kedpfey Iam Hex Akaedl Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: pripravljen za uporabo (rabljen), Marposs 6366160401 Napajalnik 706 C365 330/20W 100-120/200-240V-AC 50-60 Hz, rabljen, dobro ohranjen, 100% delujoč, dobava kot je prikazano na slikah. Ksdey Nrynopfx Akaodl

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Equipment Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate test chamber Cooling: water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Ideal for use in research, development, and quality assurance. Operating Condition Display: Manual operation / stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7 % RH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Kdedpfoy H H D Ajx Akajl Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with protocol Condition Used. Condition as shown in photos. Note Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climatic Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climatic test chamber Cooling: water-cooled Description Used climatic test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Pre-cooling compressor: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS Touch-/LCD control unit Program operation Sample protection / temperature limiter Kdsdpfx Aey H Hmwokasl Water-cooled refrigeration unit Humidity system with water bath Automatic water refill possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Ports 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climatic Test Chamber CS-70/600-5/S Documentation / test certificates (if available) Service prior to delivery (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition as per photos. Note Used device, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. For use in industry, research, and quality assurance. Technical Specifications Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Cooling System Refrigerant: R404A / R23 Cascade refrigeration system Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Kodpfx Akey H Hl Hjajdl Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (as far as available) Pre-delivery service (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Cosmetic condition as per images. Note Used device, sale without warranty. Viewing possible by arrangement. Loading and transport can be organized on request. Specifications subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Model: C-70/600 Climate Chamber CTS C-70/600 air-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate chamber, model C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industrial applications. Technical specifications: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Power supply: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerants: R404A (precooling) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control unit with digital set/actual value display Specimen protection / temperature limiter Water connection / DI-water inlet Test chamber and condensate drain Feedthroughs on the sides of test chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (according to documentation): approx. 850 x 850 x 830 mm External dimensions (according to documentation): approx. 1900 x 1115 x 1850 mm Weight (according to documentation): approx. 600 kg Scope of supply: CTS climate chamber C-70/600 incl. available documentation / user manuals Scope of supply as shown in the pictures For your safety as a buyer: The device can be inspected by arrangement. Forklift loading can be organized. For your peace of mind, the following measures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Specifications are subject to change and error!) Kdsdpjy Hkazofx Akaol If you have further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Tehnični podatki za prečno nosilko paletnega regala: Regalni sistem: Arestant Tip: AS Vsebuje: 01x prečna nosilka za paletni regal, rabljena Barva materiala: oranžna Škatlast profil: 100 x 50 mm Kljuka: 4 HK (kljuke) Čista širina: 1.805 mm 02x varovalni zatiči, rabljeni Izvedba: popolnoma pocinkano Za zavarovanje prečnih nosilcev pred nenamernim dvigovanjem Vaše kontaktne osebe pri nas: Kdjdpfsw Uitzsx Akasl G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Če želite transport ali pošiljanje izdelka, so z njim povezani dodatni stroški, ki jih je mogoče posebej preveriti glede na kraj dostave oziroma obseg dobave.

Stanje: dober (rabljeno), Tehnični podatki o prečki paletnega regala: Regalni sistem: Jung Heinrich Tip: Hubertus Obseg dobave: 01x prečka paletnega regala, rabljena Barva materiala: sendzimir pocinkano Škatlasti profil: 100 x 50 mm Agrafa: 2 HK Čista širina: 1.800 mm 02x varnostni zatič, rabljen Izvedba: sendzimir pocinkano Za dodatno zaščito vzdolžnih nosilcev Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Kdsdpfjw U Dlfjx Akajl Ta artikel je na voljo samo za osebni prevzem. Vsakršni dodatni prevoz ali pošiljanje tega artikla sta povezana z dodatnimi stroški, ki jih lahko individualno preverite pri nas, odvisno od kraja dobave oziroma obsega pošiljke.

Stanje: zelo dobro (rabljeno), CTS Type: C-40/350 Air-Cooled Climate Test Chamber For sale is a professional CTS climate test chamber, model C-40/350. This device is engineered for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temporal temperature deviation: ≤ ±0.3 K - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climatic Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% r.H. - Dew point range: +5°C to 78°C - Temporal temperature deviation: ≤ 1.0 K - Temporal humidity deviation: ≤ +3.0% r.H. Technical specifications are based on an ambient temperature of +25°C, rated voltage of 400V, without test specimen, heat compensation, or additional equipment. Options may affect performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, continuously variable capacity via electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber floor load capacity: 150 kg/m² - Shelf: stainless steel, support area 620 x 600 mm - Max. load per shelf: 35 kg - Total load at maximum shelf configuration: 100 kg Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input of set values - Plain-text error messages Kdedpfx Akjx Ekupeael - RS 232 interface - Ethernet interface - Free switching channels for customer-side specimen control Dimensions: - Test volume: 350 liters - Internal dimensions (H x W x D): 750 x 650 x 720 mm - External dimensions (H x W x D): 1800 x 920 x 1670 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level:

Stanje: zelo dobro (rabljeno), Here we offer you a temperature test chamber. Water-cooled Technical performance data: Temperature working range Temperature range in °C: -70 / +180°C Change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (H x W x D): approx. 750 mm x 650 mm x 720 mm External dimensions (H x W x D): approx. 1800 mm x 850 mm x 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Rated power: 13.3 kW Refrigerants: R404A / R23 Weight: approx. 650 kg Model: TS-70/350 For your security as a buyer, please note the following information! The following actions are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components Kdsdpfeyguprox Akasl 2. Refilled with compliant refrigerant according to regulations 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see pictures) (Subject to modifications and errors in technical specifications and details!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a climate test chamber. Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Kdedpfeygumksx Akael Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% r.h. Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 to ±0.3 K over time Humidity deviation: ±1% to ±2% r.h. over time up to 90% r.h., max. ±1% to 3% r.h. over time above 90% r.h. Electrical connection: 400V +6-10 %, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information! The following procedures are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a test run monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Technical data and specifications are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Kjdpfoup T Uqex Akajdl Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: rabljeno, COMPLETE LINE FOR LOADING, CUTTING, DEBURRING AND UNLOADING, manufactured by RALC CTS CONNI OPTIONAL: AUTOMATIC ROBOTIC PACKAGING SYSTEM for square/hexagonal bundles, with outfeed carriage and safety zones Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140 mm - Bundle loader: 6,000 mm - 12,300 mm x 5 tons - Unloading: Up to 5,000 mm - Optional: Automatic robotic packaging system BUNDLE SPECIFICATIONS: Weight on loader: 5,000 kg Max. diameter: 600 mm Min. – max. tube entry length: 6,000 – 12,300 mm Maximum tube curvature at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Round: 40 – 140 mm - Square: 40x40 – 135x135 mm - Rectangular: 50x25 – 200x80 mm Max. tube weight: 200 kg Feed speed: 10 - 60 m/min Saw blade diameter: 350-400-450 mm Disc clamping according to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at output: 5,000 mm DEBURRING Deburring unit Dimensions: - Round diameter: 20 – 102 mm - Square dimensions: 30x30 – 70x70 mm - Rectangular dimensions: 40x20 – 80x50 mm Length: 500 – 5,000 mm Material: Stainless steel 37 according to DIN17100 Maximum tube curvature at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITER CUTTING Manual loading also enables MITER CUTTING. Cutting capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Square: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangle: Kjdpevt Tzcefx Akajdl - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF DELIVERY 1. Loader Mod. CM5FT12 for bundles of 5,000 kg and lengths from 5,000 to 12,300 mm 2. Cutting unit Mod. LYBRA C450 with: - Microlubrication - Air blow-off - Chip conveyor - Tilting carriage - Unloading grip 3. Deburring unit Mod. SDB100 5000 4. Outfeed cradle with endless slings 5. Complete electrical and hydraulic systems 6. Existing documentation * 7. Existing spare parts * *To be verified before order placement. OPTION: Automatic front pick-up portal with robot, capable of packaging round, square or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6,000 mm - 12,300 mm x 5 tons Unloading: Up to 5,000 mm Optional: Automatic robotic packaging system Bundle weight on loader: 5,000 kg Maximum bundle diameter: 600 mm Tube length at entry: 6,000 – 12,300 mm Tube curvature at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, round: 40 - 140 mm CUTTING Possible dimensions with loader, square: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Tube weight: Maximum 200 kg Feed speed: 10-60 m/min Saw blade diameter: 350 - 400 - 450 mm Tube length at output: Max. 5,000 mm DEBURRING Round diameters: 20 – 102 mm DEBURRING Square dimensions: 30x30 – 70x70 mm DEBURRING Rectangular dimensions: 40x20 – 80x50 mm Length: 500 – 5,000 mm Material: Steel 37 according to DIN17100 Maximum tube curvature at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, For sale is a Cognex camera system designed for demanding OCR assembly verification and defect detection applications. The system has never been used and is sold as a complete set including all accessories as shown in the pictures. The model number is IS7802-373-50-LAB // 821-10035-2R and can be researched online for further details. Kdedpsmx Sl Tsfx Akajl Digital industrial image processing camera (2Mpixel) with PatMax RedLine + Gigabit Ethernet (GigE) - Demonstration unit - COGNEX (In-Sight 7000 Gen2 series) - 7802 - 1600x1200 pixels UXGA resolution (1/1.8" CMOS monochrome sensor with global shutter) - 53fps - C-Mount type / S-Mount type - 7.2GB (program; non-volatile flash memory) + 512MB (SDRAM) + 8GB (SD card) - 1 x digital input (15-28VDC / optocoupler; isolated trigger input) + 3 x digital inputs (15-28VDC / optocoupler; isolated discrete inputs) + 4 x digital outputs (26.4VDC 50mA / sink/source discrete outputs) - 8-pin M12 connector (Ethernet) + 5-pin M12 connector (power supply) + 12-pin M12 connector (breakout) + Micro SD card slot - Supply voltage 24VDC - with RS-232C + Ethernet + PROFINET + CC-Link + Modbus TCP communication capabilities - IP67 - aluminum (die-cast) housing - compatible with PatMax RedLine.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber allows for the assessment of the function or material properties of test objects under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation rate ensures effective transfer to the test specimen. The air treatment section is located at the rear of the interior chamber. The technical units are housed behind the chamber in a separate frame and are easily accessible. The control system is located in a separate switch cabinet, with the operator panel integrated into the cabinet door. For dehumidifying the test chamber, the unit is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan. Technical Specifications: Temperature Testing: Ksdpfx Aex Eabpjkaodl - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test specimen and radiant heating, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time All technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without any test specimen, irradiation, or additional equipment. Dimensions: Interior (test chamber / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm - External dimensions: Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: Refrigeration unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes: - Inspection by appointment (46325 Borken) - Shipping by freight carrier possible – costs & arrangements on request - Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone. Kodpfx Akex Eaxboaodl

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) Ksdpfxsx D Abpj Akaodl - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Kdodpfovb Hanox Akasl Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in Kdsdpfx Akovb E Uqoaol -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), Tehnični podatki za paletno regalno prečko: Regalni sistem: Dexion (Hovik) Tip: P 90 V obsegu dobave: 01x paletna prečka, rabljena Barva materiala: bela I-profil: 100 x 50 mm Viseča kljuka: 5 HK Prosta širina: 1.800 mm 02x varnostni zatič, rabljen Izvedba: sendzimir pocinkano Za varovanje vzdolžnih nosilcev Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo le za osebni prevzem. Če želite prevoz ali pošiljanje tega izdelka, to pomeni dodatne stroške, ki jih je mogoče posebej preveriti pri nas glede na kraj dostave oziroma obseg dobave. Kjdpfx Aew R N Hyekasdl