Z vlažnostjo 600 litrov

CTS Klimaprüfschrank C-70/600 -70°C bis +180°C

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber C-70/600 Equipment Data Manufacturer: CTS GmbH Model: C-70/600 Design: Climate test chamber Cooling: water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climate testing. Ideal for use in research, development, and quality assurance. Operating Condition Display: Manual operation / stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7 % RH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration unit Low temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Features Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Cable ports RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS climate test chamber C-70/600 Documentation (if available) Service before delivery (optional) Function check Refrigerant service Leak test Trial run with protocol Condition Used. Condition as shown in photos. Note Ppodpfx Ajy H H D Ajgxsr Used equipment, sale without warranty. Inspection by arrangement possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Climatic Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climatic test chamber Cooling: water-cooled Description Used climatic test chamber from CTS. Suitable for temperature, climate, and stress screening tests. Intended for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (drain water bath). Operating Hours Total: 19,788 h Compressor cooling: 8,699 h Pre-cooling compressor: 11,432 h Circulation pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber CTS Touch-/LCD control unit Program operation Sample protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water refill possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Ports 1x NW 50 2x NW 125 Dimensions Pjdpfx Asy H Hmwegxopr Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climatic Test Chamber CS-70/600-5/S Documentation / test certificates (if available) Service prior to delivery (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. Visual condition as per photos. Note Used device, sale without warranty. Inspection by appointment possible. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Stanje: zelo dobro (rabljeno), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, ideal for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industrial applications. The unit is in used condition and can be fully inspected as shown in the photos. Current display: Manual operation / Stop. Operating hours as per display: Technical data: Temperature range: -70°C to +180°C Humidity range: 10% to 98% RH Dew point range: -10°C to +94°C Podsy Hkblspfx Agxspr Test chamber volume: 600 liters Temperature change rate according to IEC 60068-3-5: Heating: 6.0 K/min Cooling: 7.0 K/min Electrical connection: 400 V 3/N 50 Hz Rated power: 14.6 kW Rated current: 22.0 A Protection class: IP 22 Refrigerants: R404A / R23 Pre-cooling stage: R404A – 4.5 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 17.65 t / 31.08 t GWP: 3922 / 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in door Stainless steel test chamber LED chamber lighting CTS LCD control panel with digital controls Specimen protection / temperature limiter Water-cooled refrigeration unit Automatic water top-up / deionized water inlet Test chamber and condensate drain Volt-free contact Digital outputs RS232 interface Ethernet interface Lateral cable ports Cable ports according to layout: 1x port NW 50 2x ports NW 125 Test chamber dimensions according to layout: approx. 850 x 850 x 830 mm External dimensions according to layout: approx. 1900 x 1120 x 1875 mm Weight / mass according to documentation: approx. 750 kg Scope of delivery: CTS climate test chamber CS-70/600-5 including available documentation / test certificates Scope of delivery as shown in the photos For your security as the buyer: The device can be inspected by appointment. Loading by forklift can be arranged. If you have any questions, please feel free to contact us. For your security as the buyer, please note the following! The following points are completed on our offered chambers before sale: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Subject to technical changes and errors in the specifications!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber type C-70/600 for precise temperature and climate testing in research, development, quality assurance, and industrial applications. The device is pre-owned and condition is fully visible in the photos. The current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7 % RH, and actual water reservoir 11.0 l. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerants: R404A (precooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control unit with digital actual/setpoint display Specimen protection / temperature limiter Water connection / DI water supply Pjdoy Hkazepfx Agxopr Test chamber and condensate drain Tube feedthroughs on the side of the test chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (per documentation): approx. 850 x 850 x 830 mm External dimensions (per documentation): approx. 1900 x 1115 x 1850 mm Weight (per documentation): approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 including available documentation / operating instructions Scope of delivery as shown in the photos For your security as a buyer: The device can be inspected by appointment. Loading by forklift can be arranged. For your security as a buyer, please note the following procedures! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if needed 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used (Subject to change and errors in the technical data and information!) Further questions can gladly be answered by phone.