Temperaturna komora 2000 litrov
CTS T-40/2000 -40°C bis +180°C

Stanje

Rabljeno

Lokacija

Borken

Temperaturna komora 2000 litrov CTS T-40/2000 -40°C bis +180°C

Prikaži karto

Podatki o stroju

Opis stroja:: Temperaturna komora 2000 litrov

Proizvajalec:: CTS

Model:: T-40/2000 -40°C bis +180°C

Stanje:: zelo dobro (rabljeno)

Cena in lokacija

Lokacija:: Einsteinstraße 8a, 46325 Borken, Deutschland

Klic

Podrobnosti ponudbe

ID ponudbe:: A17202157

Št. reference:: 24329

Nazadnje posodobljeno:: dne 15.11.2024

Opis

CTS
Type: T-40/2000
Air-Cooled Temperature Test Chamber
Technical Specifications:
Refrigeration Unit:
Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A.
Door:
Fully openable, left-hinged door with one-hand operation, lockable.
Shelf:
Stainless steel, support surface 970 x 980 + 500 mm
Load per shelf: max. 35 kg
Total maximum load (all shelves): 100 kg
Test Chamber Lighting: 3x halogen lamp 20 W, 12 V
Control System:
32-bit controller
LCD control panel
Digital display of set and actual values
Numeric input of setpoint values
Plain text error messages
RS 232 interface
Free relay outputs for user-provided test item control
Temperature Range: -40°C to +180°C
Rated Voltage: 400V 3/N 50Hz
Rated Power: 10.4 kW
Rated Current: 17.2 A
Compressor: TFH2516Z
Cable port: nominal width 50 mm
Control Panel
Window: 570x710 mm
Electrical connection, cable length: 5 m
Technical Performance Data:
Psdoup T Uqspfx Agpsrd
Temperature Tests:
Temperature range: -40°C to +180°C
Temperature deviation: ≤ ±0.3 K (over time)
Temperature change rate (acc. IEC 60068-3-5):
Heating: 2.5 K/min
Cooling: 1.5 K/min
Heat Radiation:
Approx. 2500 W at +20°C
Approx. 2100 W at ±0°C
Approx. 1500 W at -20°C
Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment.
Dimensions:
Test volume: 2000 liters
Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm
External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm
Operating Data:
Power supply: 400 V +6/-10%, 3/N, 50 Hz
Rated Power: 17.2 kW
Protection class: IP 22
Condensate drain: gravity flow, R 1/2" internal thread
Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A)
Weight: approx. 1200 kg
Important Safety Information for Buyers!
The following actions are performed on all chambers we offer prior to sale:
1. Function check and replacement of necessary components
2. If needed, refill with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, chambers undergo a documented test run.
Condition: used
Scope of delivery: (Refer to image)
(Subject to change and error in technical data and specifications!)
For further questions, feel free to contact us by phone.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2012

584 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 2861 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

Univerzalni preskusni stroj Stroj za natezno preskušanje Richard Hess MBV GmbH Universalprüfmaschine H3000TM

Sonsbeck

874 km

Univerzalni preskusni stroj Stroj za natezno preskušanje
Richard Hess MBV GmbHUniversalprüfmaschine H3000TM

Klic

Leto izdelave: 2018, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine H3000TM Made in Germany Podpfxet Rg H As Agpord Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Poglej podrobnosti

mali oglas

Prehodna klimatska preizkusna komora, klimatska komora Vötsch VSKZ 04/120/S

Borken

876 km

Prehodna klimatska preizkusna komora, klimatska komora
VötschVSKZ 04/120/S

16.700 €

Začetna cena brez DDV

Klic

Leto izdelave: 1996, Stanje: zelo dobro (rabljeno), Vötsch VSKZ 04/120/S walk-in climate test chamber Manufacturer: Vötsch Model: VSKZ 04/120/S Temperature range: -40°C to +120°C Mains voltage: 400V Rated current: 95A Rated power: 56 kW Pjdpsuuigysfx Agpsrd Refrigerant: R 404 A Year of manufacture: 1996 External dimensions: W 2850 x D 4100 x H 3080 mm SO-01 You will find more articles – new and used – in our shop! International shipping costs on request!

Poglej podrobnosti

mali oglas

XENON Fade-Ometer Atlas CI3000 Model Nr. CI3000 F

Borken

868 km

XENON Fade-Ometer
AtlasCI3000 Model Nr. CI3000 F

14.500 €

Stalna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), Atlas Model: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and Fade-Ometer, with their advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series has been approved by many OEMs in the textile, paint and coatings, as well as plastics industries, as an exclusive platform for precise, reproducible, and repeatable results for lifetime prediction. Features: - Climate Type - Test Method: Sunlight Simulation Pedpfxeucd Rbe Agpord - Light Source: Xenon Arc Lamp Applications: - Additives and Dyes - Adhesives and Sealants - Architecture and Construction - Automotive Industry - Food and Beverage - Graphic Arts - Packaging - Paints and Coatings - Photovoltaics - Plastics - Textiles - Wind and Solar Energy - Consumer Electronics Compressed Air Supply: The CI3000 humidification system operates with a compressed air ultrasonic spray nozzle. Before entering the unit, the compressed air must be passed through a water/oil separator. The small air regulator in the CI3000 contains a secondary water/oil filter and a 5-micron particulate filter. Ensure that a separate oil-water separator is installed and do not rely solely on the air regulator filter, as this is intended only as an auxiliary device. Compressed Air Specifications: - Pressure: 80-100 PSI (552-689 kPa) - Flow rate: 4 CFM (0.11 m³/min) Dimensions: - Overall dimensions of CI3000: 37.5" W x 29" D x 72" H (95 cm W x 73 cm D x 183 cm H) - Required footprint: 41.5" W x 80" D (105 cm W x 203 cm D) - Total weight: 404 kg - Voltage: 380-220 V, 38 A, 50 Hz, 3/N/PE, 8 kW Condition: Used Scope of delivery: see photo (Specifications and technical data subject to change and errors reserved!) For further questions, please feel free to contact us by phone.

Poglej podrobnosti

mali oglas

Stroj za točkovno varjenje SIMSEK MP 16 KVA ( 2003)

Tatabánya

305 km

Stroj za točkovno varjenje
SIMSEKMP 16 KVA ( 2003)

2.500 €

Stalna cena brez DDV

Klic

mali oglas

Geertruidenberg

963 km

Klimatska komora
Feutron3703/13

1.900 €

Začetna cena brez DDV

Klic

mali oglas

Temperaturna preskusna komora 1540 litrov Vötsch VT³ 4150 -40°C bis +180°C

Borken

868 km

Temperaturna preskusna komora 1540 litrov
VötschVT³ 4150 -40°C bis +180°C

Klic

Stanje: zelo dobro (rabljeno), Vötsch Type: VT³ 4150 Pedpfxjw Ehuts Agpjrd Vötsch Temperature Test Chamber, Air-cooled Temperature Testing Temperature range: -40°C to +180°C Rate of change: Cooling approx. 2.5 K/min. Rate of change: Heating approx. 3.5 K/min. Layout plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A Important safety information for buyers! The following steps are carried out on all of our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Poglej podrobnosti

mali oglas

Temperaturna preskusna komora Vötsch VT³ 4150/S

Borken

868 km

Temperaturna preskusna komora
VötschVT³ 4150/S

Klic

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Change rate: cooling approx. 3.5 K/min Change rate: heating approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Installation plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Function check and replacement of necessary components Prodpfx Agsinuhgeped 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and correction!) If you have any further questions, we will be happy to answer them by phone.

Poglej podrobnosti

mali oglas

Podnebna preskusna komora Espec EGNX12-6CWL

Borken

868 km

Podnebna preskusna komora
EspecEGNX12-6CWL

Klic

Stanje: dober (rabljeno), Espec Model: EGNX12-6CWL Espec Temperature and Climate Test Chamber, Air-Cooled Temperature (and Humidity) Test Chamber N Series Power supply: AC 400/460 V, 3-phase, 50/60Hz, 32A Temperature range: -70 to +180°C Humidity range: 10% to 95% RH Prodpfx Agst Nf Upepsd Temperature change rate: Heating: 15 K/min Cooling: 11 K/min Internal dimensions (W x H x D in mm): 600 x 750 x 850 External dimensions (W x H x D in mm): 889 x 2098 x 1768 Usable volume: 380 l Refrigerant: R404A Weight: 370 kg For your security as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to change and errors in technical data, information is provided without liability!) We are happy to answer any further questions you may have by phone.

Poglej podrobnosti

mali oglas

Temperaturna preskusna komora -40 do + 100 ° C Feutron TPK 3403/15

Borken

876 km

Temperaturna preskusna komora -40 do + 100 ° C
FeutronTPK 3403/15

8.500 €

Stalna cena brez DDV

Klic

mali oglas

Borken

868 km

Temperaturna preskusna komora 1540 litrov
VötschVT³ 4150 -40°C bis +180°C

Klic

Stanje: zelo dobro (rabljeno), Vötsch Type: VT³ 4150 Vötsch Temperature Test Chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min Rate of change: Heating approx. 4 K/min Temperature test Temperature range: -40°C to +180°C Prsdpfsu Nh Rbsx Agped Exhibition plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) Further questions can be answered by phone.

Poglej podrobnosti

Oglašujte tukaj