Temperaturna Komora 2000 Litrov nakup rabljenega (10.949)

Stanje: zelo dobro (rabljeno), CTS Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Hsdpfxezg Twao Adksfk Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for Climatic Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port Ø approx. 50 mm, left side 2 ports Ø approx. 125 mm, left side 1 port Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as the buyer, please note the following: The following procedures are carried out in advance on all our offered chambers: Hodezizl Depfx Adksfk 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with touch panel) Features of this control system: - Color touchscreen with intuitive menu navigation (usually 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible if applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optional Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min - Maximum thermal compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Interior dimensions (W×D×H): 1100 × 950 × 950 mm - Exterior dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is fitted with port openings on the right and left sides. These allow measurement lines and test devices to be routed into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Where needed, refilling with a legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Hfedpsziyxpefx Adkjk Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and details!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber T-70/600 Water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test item control Shelving: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total max load for full shelf setup: 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Hfedpsziycbsfx Adksk Thermal radiation max. 1500 W at +20°C Technical data refers to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without auxiliary equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, new filling with legally approved refrigerant 3. Leak test with certificate 4. After successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and information subject to confirmation!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature test chamber with S!MCON / 32 controller, water-cooled Control unit: "Touchpanel" All control and operation commands can be initiated simply by touching the function symbols on the 'touchpanel' control unit. Leveling feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to ensure adequate ventilation of the machine components. Access ports The test chamber is equipped with access ports on the right and left sides. Through these, measuring cables and test devices can be routed into the test chamber. Standard access ports installed: Hsdpfsziyb Rsx Adkjfk R1: DN 125 mm L1: DN 50 mm (Refrigerant converted to R-452A) Test space volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable volume: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation: max. 2500 W Operating data: Test chamber lighting: Halogen bulb, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (customer-provided): 16 A, slow-blow Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) If you have any questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Hjdpfoziizysx Adksfk Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal supports to increase floor load capacity. Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Hsdpfx Adjzh Htwekofk Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to call us.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Hfedszh D E Repfx Adkek Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Hodpfezg Ty Iox Adkefk Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all data provided without guarantee!) Please feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Hedpfx Adozg Eygjkefk Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Hsdpfxezgbmis Adkjfk Technical Data: Mechanical loading data: Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Hfsdozga Huepfx Adkjk Weiss temperature chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control unit: Touch panel All control and operating commands can be activated on the touch panel simply by touching the function icons. Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Feedthroughs are integrated into the right and left sides of the test chamber. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test specifications: Temperature range: -42 to +180 °C Temperature deviation over time at chamber center: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Operating data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, rated power 7.8 kW Customer-side fuse: 16 A slow-blow Sound pressure level: Measured at 1m distance from the front, height 1m: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and specifications!) We will be happy to answer any further questions by telephone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions: Chamber external: Width 1,540 mm x Height 2,090 mm x Depth 1,240 mm With fan motor and door removed: Width 1,540 mm x Height 1,940 mm x Depth 925 mm Test chamber interior: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm External dimensions with doors open: Width 2,340 mm x Height 2,090 mm x Depth 2,165 mm Feedthroughs: 2 pieces, side wall left, diameter 100 mm Temperature range -70°C to +180°C Heating rate: 3.0 K / min Hfjdpfxezgah Sj Adkok Cooling rate: 3.0 K / min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 Important information for buyers for your safety! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications and technical details subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS TS-70/200-5/S temperaturna testna komora Proizvajalec: CTS Clima Temperatur Systeme GmbH Tip: TS-70/200-5/S Tip stroja: temperaturna testna komora / stresno-screening testna komora Volumen testne komore: pribl. 200 litrov Na prodaj je rabljena temperaturna testna komora proizvajalca CTS. Testna komora je primerna za temperaturna testiranja, stresno-screening, simulacijo okoljskih pogojev, testiranje materialov, zagotavljanje kakovosti ter razvojne in obremenitvene teste. Tehnični podatki Temperaturno območje: -70 °C do +180 °C Hitrost spremembe temperature (gretje): pribl. 8 K/min Hitrost spremembe temperature (hlajenje): pribl. 6 K/min Najv. emisija toplote pri +20 °C: pribl. 3500 W Mere testne komore pribl.: 650 x 400 x 750 mm (Š x G x V) Mere ohišja pribl.: 920 x 1345 x 1800 mm (Š x G x V) Teža pribl.: 550 kg Priključek na omrežje: 400 V 3/N / 50 Hz Moč: 10,9 kW Nazivni tok: 15,7 A Stopnja zaščite: IP22 Hfsdpfxszf Hi He Adkok Hladilno sredstvo, predhlajenje: R404A Količina hladiva, predhlajenje: 2,5 kg Hladilno sredstvo, hladilna stopnja: R23 Količina hladiva, hladilna stopnja: 0,6 kg / 15 bar Obratovalni nadtlak PS: 25 bar Preskusni tlak PT: 20 bar Oprema Upravljanje prek zaslona na dotik Opazovalno okno v vratih Notranjost iz nerjavečega jekla Osvetlitev testne komore Stranske preboje po slikah Vložne police / oprema testne komore po slikah Zaščita preizkušancev pred previsoko temperaturo Varnostni regulator Eurotherm RS232-vmesnik Dokumentacija / gradiva po slikah Področja uporabe Temperaturno testiranje Stresno-screening Simulacija okoljskih pogojev Testiranje materialov Preskušanje elektronike Zagotavljanje kakovosti Raziskave in razvoj Obseg dobave 1x CTS TS-70/200-5/S temperaturna testna komora Vložne police / oprema testne komore Obstoječa dokumentacija / gradiva Dodatna oprema po slikah Stanje Rabljeno Vizualno stanje po slikah Obseg dobave kot je prikazano. Spremembe in napake v tehničnih podatkih ter predhodna prodaja so pridržane.

Stanje: zelo dobro (rabljeno), Vötsch VC 4060 klimatska testna komora Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4060 Tip stroja: klimatska testna komora / temperaturna testna komora Testni volumen: ca. 600 litrov Krmiljenje: S!MCON / 32 Hlajenje: vodno hlajeno Hladilno sredstvo: R452A Naprodaj je rabljena klimatska testna komora proizvajalca Vötsch. Komora je primerna za temperaturna in klimatska testiranja, simulacijo okoljskih pogojev, preizkušanje materialov, zagotavljanje kakovosti ter razvojne in obremenitvene teste. Tehnični podatki Notranje mere komore: ca. 800 x 800 x 950 mm (Š x G x V) Zunanje mere ohišja: ca. 1090 x 1960 x 1995 mm (Š x G x V) Teža: ca. 600 kg neto Temperaturno območje: -40 °C do +180 °C Hitrost spremembe temperature - segrevanje: ca. 4,0 K/min Hitrost spremembe temperature - hlajenje: ca. 3,0 K/min Časovno temperaturno odstopanje: ±0,1 do ±0,5 K Prostorsko temperaturno odstopanje: ±0,5 do ±2 K Temperaturni gradient: ca. 1 do 4 K Klimatski razpon temperature: -10 °C do +95 °C Območje vlage: 10 % do 98 % r. v. Odstopanje vlažnosti: ±0,1 do ±3 % r. v. Časovno temperaturno odstopanje v klimatskem načinu: ±0,1 do ±0,3 K Prostorsko temperaturno odstopanje v klimatskem načinu: ±0,5 do ±1,0 K Temperaturni gradient v klimatskem načinu: ca. 1 do 2 K Električni priklop: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 7,8 kW Nazivni tok: 15,0 A Zaščita: 16 A počasna, na strani uporabnika 1 preboj Ø 50 mm levo vgrajen 1 preboj Ø 125 mm desno vgrajen Testni prostor iz nerjavečega jekla Upravljanje preko zaslona na dotik Oprema Krmilnik S!MCON / 32 Upravljanje preko zaslona na dotik Notranjost iz nerjavečega jekla Osvetlitev testnega prostora Stranska preboja Ø 50 mm in Ø 125 mm Police / oprema testnega prostora po slikah Vodno hlajen sistem Dokumentacija / navodilo za uporabo Priložena oprema glede na slike Področja uporabe Preizkus temperature Klimatsko testiranje Simulacija okolja Preizkušanje materialov Preizkušanje elektronike Zagotavljanje kakovosti Raziskave in razvoj Obseg dobave 1x Vötsch VC 4060 klimatska testna komora Dokumentacija / navodilo za uporabo Pribor po slikah Stanje Rabljeno Vizualno stanje po slikah Hjdpfxezf E E Ts Adkjfk Ogled možen po predhodnem dogovoru Opomba: Naprava je bila predelana na hladilno sredstvo R452A. Obseg dobave kot na slikah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje.

Stanje: zelo dobro (rabljeno), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Usable volume: approx. 980 litres Temperature range: -70°C to 180°C Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating rate in °C/min, -65°C to 71°C: 6.8°C Heating rate in °C/min, -65°C to 180°C: 5.6°C Heating rate in °C/min, -40°C to 85°C: 6.5°C Cooling rate in °C/min, 85°C to -40°C: 4.7°C Cooling rate in °C/min, 71°C to -65°C: 3.7°C Cooling rate in °C/min, 180°C to -65°C: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE, 35 A Refrigerants: R508B and R404A Approx. weight: 900 kg Type: Thermotron SE-1000-6-6 For your safety as a buyer, please note the following: The following procedures are carried out on all chambers we offer in advance: 1. Functional test and replacement of necessary components 2. Refilling with legally compliant refrigerants Hedpfszd R T Hjx Adkjfk 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Hjdpfx Adszd R Tgokjfk Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, we provide the following information! The following steps are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch VC³ 4018 – klimatska komora za preskušanje Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC³ 4018 Tip stroja: klimatska komora / temperaturna komora Izvedba: zračna Prostornina preskusne komore: približno 190 litrov Naprodaj je rabljena klimatska komora proizvajalca Vötsch. Model VC³ 4018 je primeren za temperaturna in klimatska preskušanja, simulacijo okoljskih razmer, preskušanje materialov, preskušanje elektronike, zagotavljanje kakovosti ter raziskovalne in razvojne aplikacije. Tehnični podatki: Temperaturno območje: -42 °C do +180 °C Hitrost spreminjanja temperature (ogrevanje): približno 4 K/min Hitrost spreminjanja temperature (hlajenje): približno 5 K/min Maks. toplotna kompenzacija pri delovanju pri različnih temperaturah: približno 2300 W Časovni odklon temperature: ± 0,1 do ± 0,5 K Prostorna homogenost temperature: ± 0,5 do ± 1,5 K Klimatsko območje (temperatura): +10 °C do +95 °C Območje rosišča: -3 °C do +94 °C Območje vlažnosti: 10 do 98 % relativne vlažnosti Časovni odklon temperature pri delovanju v klimatskem načinu: ± 0,1 do ± 0,3 K Prostorna homogenost temperature pri delovanju v klimatskem načinu: ± 0,5 do ± 1 K Časovni odklon vlažnosti: ± 1 do ± 3 % relativne vlažnosti Toplotna kompenzacija pri delovanju v klimatskem načinu: približno 400 W Dimenzije preskusne komore: približno 580 x 450 x 750 mm (Š x G x V) Dimenzije ohišja: približno 870 x 1550 x 1800 mm (Š x G x V) Teža: približno 470 kg Hsdpfx Ajzc Ht Ijdksfk Hladilno sredstvo: R404A Količina hladilnega sredstva: 2,50 kg Maks. tlak: 22,5 bar g Maks. visokotlačni tlak: 25 bar g Priključitev na omrežje: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 4,1 kW Nazivni tok: 14 A Osvetlitev preskusne komore: halogenska, 2 x 24 V / 50 W Oprema Upravljanje na dotik Pregledno okno na vratih Preskusna komora iz nerjavečega jekla Osvetlitev preskusne komore Stranske odprtine Police / notranja oprema glede na slike Dokumentacija / navodila za uporabo Dodatna oprema glede na slike Stanje Rabljeno Vizualno stanje glede na slike Obseg dobave kot je prikazano Ogled je možen po dogovoru Opombe o varnosti Za varnost naših strank izvajamo naslednja dela na ponujenih klimatskih komorah: 1. Preverjanje funkcij in zamenjava potrebnih komponent 2. Po potrebi ponovno polnjenje s hladilnim sredstvom, ki je v skladu z zakonom 3. Preizkus tesnosti s potrdilom 4. Dokumentiran preizkusni tekel po uspešnem preverjanju Zaradi velikosti in teže priporočamo dostavo s špediterjem. Obseg dobave kot je prikazano. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do morebitne vmesne prodaje.

Stanje: zelo dobro (rabljeno), Vötsch VC³ 4018 – klimatska komora za preskušanje Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC³ 4018 Tip stroja: klimatska komora / temperaturna komora Izvedba: zračna Prostornina preskusne komore: približno 190 litrov Naprodaj je rabljena klimatska komora proizvajalca Vötsch. Model VC³ 4018 je primeren za temperaturna in klimatska preskušanja, simulacijo okoljskih razmer, preskušanje materialov, preskušanje elektronike, zagotavljanje kakovosti ter raziskovalne in razvojne aplikacije. Tehnični podatki: Temperaturno območje: -42 °C do +180 °C Hitrost spreminjanja temperature (ogrevanje): približno 4 K/min Hitrost spreminjanja temperature (hlajenje): približno 5 K/min Maks. toplotna kompenzacija pri delovanju pri različnih temperaturah: približno 2300 W Časovni odklon temperature: ± 0,1 do ± 0,5 K Prostorna homogenost temperature: ± 0,5 do ± 1,5 K Klimatsko območje (temperatura): +10 °C do +95 °C Območje rosišča: -3 °C do +94 °C Območje vlažnosti: 10 do 98 % relativne vlažnosti Časovni odklon temperature pri delovanju v klimatskem načinu: ± 0,1 do ± 0,3 K Prostorna homogenost temperature pri delovanju v klimatskem načinu: ± 0,5 do ± 1 K Časovni odklon vlažnosti: ± 1 do ± 3 % relativne vlažnosti Toplotna kompenzacija pri delovanju v klimatskem načinu: približno 400 W Dimenzije preskusne komore: približno 580 x 450 x 750 mm (Š x G x V) Dimenzije ohišja: približno 870 x 1550 x 1800 mm (Š x G x V) Teža: približno 470 kg Hladilno sredstvo: R404A Količina hladilnega sredstva: 2,50 kg Maks. tlak: 22,5 bar g Maks. visokotlačni tlak: 25 bar g Priključitev na omrežje: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 4,1 kW Nazivni tok: 14 A Osvetlitev preskusne komore: halogenska, 2 x 24 V / 50 W Oprema Upravljanje na dotik Pregledno okno na vratih Preskusna komora iz nerjavečega jekla Osvetlitev preskusne komore Stranske odprtine Police / notranja oprema glede na slike Dokumentacija / navodila za uporabo Dodatna oprema glede na slike Stanje Rabljeno Vizualno stanje glede na slike Obseg dobave kot je prikazano Ogled je možen po dogovoru Opombe o varnosti Za varnost naših strank izvajamo naslednja dela na ponujenih klimatskih komorah: 1. Preverjanje funkcij in zamenjava potrebnih komponent 2. Po potrebi ponovno polnjenje s hladilnim sredstvom, ki je v skladu z zakonom 3. Preizkus tesnosti s potrdilom 4. Dokumentiran preizkusni tekel po uspešnem preverjanju Hodpfx Adsztu Nqokjfk Zaradi velikosti in teže priporočamo dostavo s špediterjem. Obseg dobave kot je prikazano. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do morebitne vmesne prodaje.

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Vötsch ClimeEvent C/340/70/5/S – podnebna testna komora (posebna izvedba)!! Proizvajalec: Vötsch Industrietechnik GmbH Tip: ClimeEvent C/340/70/5/S Letnik proizvodnje: 2019 Tip stroja: podnebna testna komora / testna komora za temperaturo in vlago Prostornina testne komore: približno 340 litrov Opis Za prodajo je rabljena Vötsch ClimeEvent C/340/70/5/S testna komora za temperaturo in klimo, letnik 2019. Ta naprava je posebna izvedba s tremi stransko izvlečnimi teleskopskimi testnimi predali. Testni vzorci se lahko udobno pripravijo, priklopijo zunaj testne komore in nato vstavijo v testno komoro. Zaradi tega je ta naprava še posebej primerna za serijske teste, razvojne naloge, dolgotrajne teste in aplikacije s pogostimi zamenjavami vzorcev. Vsak testni predal ima košaro iz nerjavečega jekla in ločeno zapiralni sprednji del z lastno odprtino za testne vzorce. Tri ločene testne ravni omogočajo preprost vnos več testnih vzorcev ali sklopov v eno samo testno komoro. Naprava je opremljena, med drugim, z nadzorno ploščo WEBSeason Touch, regulacijo temperature in vlage, sistemom za pripravo stisnjenega zraka Donaldson in obsežno dokumentacijo. Naprava je primerna, med drugim, za: Testiranje temperature Testiranje klime Simulacijo okolja Testiranje materialov Testiranje elektronike Testiranje komponent Testiranje baterij Testiranje senzorjev Zagotavljanje kakovosti Raziskave in razvoj Teste staranja in obremenitve Tehnični podatki Proizvajalec: Vötsch Industrietechnik GmbH Tip: ClimeEvent C/340/70/5/S Letnik proizvodnje: 2019 Prostornina testne komore: približno 340 litrov Temperaturno območje: približno -70 °C do +180 °C Hitrost spremembe temperature: približno 5 K/min Maks. kompenzacija toplote: približno 3.000 W Odstopanje temperature v času: ±0,1 do ±0,5 K Homogenost temperature v prostoru: ±0,5 do ±1 K Temperaturni gradient: ≤2 K Priključek na električno omrežje: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 9 kW Nazivni tok: 20 A Hladilno sredstvo 1: R449A – 2,50 kg Hladilno sredstvo 2: R23 – 0,75 kg Maks. nizek tlak: 21 bar(g) Maks. visok tlak: 25 bar(g) Delovni tlak R23: 13 bar(g) Dimenzije Zunanje mere (V × Š × G): približno 1.800 × 895 × 1.810 mm Mere testne komore (V × Š × G): približno 750 × 580 × 765 mm Teža: približno 650 kg Oprema Nadzorna plošča WEBSeason Touch Regulacija temperature in vlage Notranjost iz nerjavečega jekla Veliko opazovalno okno 3 stransko izvlečni teleskopski testni predali 3 košare iz nerjavečega jekla Ločeno zapiralni predali Ogrevani vložki predalov Odprtine za testne vzorce Ultrafilter Donaldson za pripravo stisnjenega zraka Transportni podatki Zunanje mere (V × Š × G): približno 1.800 × 895 × 1.810 mm Teža: približno 650 kg Stanje Rabljen / Used Naprava je bila pregledana v delavnici in podvržena dokumentiranemu testnemu teku. Optično stanje ustreza slikam. Hfsdpozp Nv Djfx Adkjk Obseg dobave Vötsch ClimeEvent C/340/70/5/S – podnebna testna komora 3 teleskopski testni predali 3 košare iz nerjavečega jekla Ultrafilter Donaldson Dodatna oprema glede na slike Možna je dostava ali pošiljka preko špediterja. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Za dodatna vprašanja smo vam z veseljem na voljo po telefonu.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), VÖTSCH ClimeEvent C/340/70/5/S – klimatska testna komora Proizvajalec: Vötsch Industrietechnik GmbH Tip: ClimeEvent C/340/70/5/S Leto izdelave: 2018 Tip stroja: Klimatska testna komora / komora za testiranje temperature in vlažnosti Prostornina testne komore: pribl. 340 litrov Na prodaj je rabljen VÖTSCH ClimeEvent C/340/70/5/S klimatska in temperaturna testna komora s tremi stranskimi, teleskopsko izvlečnimi testnimi predali. Testna komora je bila zasnovana za profesionalne teste temperature, klime, vlažnosti, staranja in obremenitve ter je idealna za testna laboratorija, avtomobilsko in elektronsko industrijo, raziskovalne institute in oddelek za zagotavljanje kakovosti. Tehnični podatki: Model: ClimeEvent C/340/70/5/S Prostornina testne komore: pribl. 340 litrov Temperaturno območje: pribl. -70 °C do +180 °C Hitrost spremembe temperature: pribl. 5 K/min Napajanje: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 9 kW Nazivni tok: 20 A Hladilno sredstvo: R449A Količina hladilnega sredstva R449A: 2,50 kg Dodatno hladilno sredstvo: R23 Količina hladilnega sredstva R23: 0,75 kg Maks. nizek tlak: 21 bar g Maks. visok tlak: 25 bar g Statični tlak R23: 13 bar g Testni predali: 3 teleskopsko izvlečni testni predali Rešetkaste košare iz nerjavečega jekla za namestitev testnih vzorcev Ločeno zaporni, izolirani sprednji deli predalov Ogrevani prehodni elementi predalov Posamezne testne ravni, do katerih se lahko dostopa ločeno Primeren za namestitev več manjših komponent in podskupin Dimenzije: Zunanje dimenzije (V × Š × G): pribl. 1.800 × 895 × 1.810 mm Dimenzije testnega prostora (V × Š × G): pribl. 750 × 580 × 765 mm Teža: pribl. 650 kg Oprema: WEBSeason – upravljalni vmesnik na dotik Digitalni sistem za merjenje in nadzor Regulacija temperature in vlažnosti 3 teleskopska testna predala Rešetkaste vložke iz nerjavečega jekla Opazovalno okno Stranski prehodni elementi za kable in testne vzorce Sistem za pripravo stisnjenega zraka Donaldson Ultrafilter Licenca za programsko opremo S!MPATI Kalibracijsko potrdilo Potrdilo o preverjanju kakovosti Izjava o skladnosti z EU Dokumentacija / navodila za uporabo Dodatna oprema, kot je prikazano na slikah Področja uporabe: Testiranje temperature Klimatsko testiranje Testiranje vlažnosti Simulacija okolja Testiranje materialov Testiranje elektronike in komponent Testiranje staranja in obremenitve Avtomobilska industrija Raziskave in razvoj Zagotavljanje kakovosti Transportni podatki: Transportne dimenzije (V × Š × G): pribl. 1.800 × 895 × 1.810 mm Električni priključek: 400 V / 50 Hz / 20 A Teža: pribl. 650 kg Stanje: Rabljen / Used Vizualno stanje, kot je prikazano na slikah. Obseg dobave: VÖTSCH ClimeEvent C/340/70/5/S – klimatska testna komora 3 teleskopska testna predala z rešetkastimi vložki Donaldson Ultrafilter Dokumentacija za programsko opremo S!MPATI Kalibracijska in dokumentacija o preverjanju kakovosti Navodila za uporabo / tehnična dokumentacija Hfsdpfxszp Inre Adkek Dodatna oprema, kot je prikazano na slikah Možna je dostava oziroma pošiljka s špediterjem. Obseg dobave je kot na sliki. Pridržane spremembe, napake in možnost prodaje.

Stanje: zelo dobro (rabljeno), Vötsch VCS³ 7034-5 klimatska testna komora / temperaturna testna komora Proizvajalec: Vötsch Industrietechnik GmbH Tip: VCS³ 7034-5 Tip naprave: klimatska testna komora / temperaturna testna komora Prostornina testne komore: približno 335 litrov Naprodaj je rabljena klimatska testna komora Vötsch VCS³ 7034-5 z vodnim hlajenjem in hitrostjo spreminjanja temperature 5 K/min. Testna komora je primerna za profesionalne temperaturne in klimatske teste, simulacijo okoljskih pogojev, testiranje materialov, zagotavljanje kakovosti, teste elektronike ter razvojne in obremenitevne teste. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Tip: VCS³ 7034-5 Prostornina testne komore: približno 335 litrov Temperaturno območje: -70 °C do +180 °C Hitrost spreminjanja temperature (ogrevanje): približno 7,0 K/min Hitrost spreminjanja temperature (hlajenje): približno 6,7 K/min Časovni odklon temperature: ±0,1 do ±0,5 K Prostorski odklon temperature: ±0,5 do ±2,0 K Klimatsko območje: +10 °C do +95 °C Območje rosišča: +4 °C do +94 °C (razširjeno do -3 °C, občasno) Območje vlažnosti: 10 do 98 % relativne vlažnosti Odklon vlažnosti: ±1 do ±3 % relativne vlažnosti Hladilno sredstvo: R404A / R-23 Količina hladilnega sredstva: R404A 2,5 kg / R-23 0,75 kg Največji dovoljeni tlak (ND): 21 bar(g) Največji dovoljeni visokotlačni tlak (HD): 25 bar(g) Električni priključek: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 9 kW Nazivni tok: 20 A Varovalka na strani uporabnika: 63 A, počasi reagirajoča Dimenzije: Zunanje mere (Š × G × V): približno 870 × 1.700 × 1.775 mm Notranje mere / testna komora (Š × G × V): približno 580 × 765 × 750 mm Teža: približno 570 kg Oprema: Krmilnik S!MPAC Upravljanje na dotik Notranjost iz nerjavečega jekla Regulacija temperature in vlažnosti Ethernet vmesnik USB vmesnik Kabelska uvodnica 50 mm Kabelska uvodnica 125 mm Funkcija zaščite testnih vzorcev Dodatna oprema glede na slike Transportni podatki: Dimenzije (Š × G × V): približno 870 × 1.700 × 1.775 mm Teža: približno 570 kg Stanje: Hfsdpjzpihaofx Adkok Rabljeno / Used Vizualno stanje glede na slike. Obseg dobave: Klimatska testna komora Vötsch VCS³ 7034-5 Dodatna oprema glede na slike Razpoložljivost: po dogovoru. Obseg dobave, kot je prikazano na slikah. Pridržujemo si pravico do sprememb, napak in prodaje predhodno.

Stanje: zelo dobro (rabljeno), Vötsch VC 4034 klimatska testna komora / temperaturna testna komora zračna hladitev Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4034 Tip naprave: klimatska testna komora / temperaturna testna komora Prostornina testnega prostora: približno 335 litrov Naprodaj je rabljena Vötsch VC 4034 klimatska testna komora podjetja Vötsch Industrietechnik GmbH. Temperaturna in klimatska testna komora z zračno hladitvijo je primerna za profesionalne temperaturne in klimatske teste, simulacije okoljskih razmer, preizkušanje materialov ter razvojne in obremenitvene teste. S temperaturnim območjem od -40 °C do +180 °C in območjem vlažnosti od 10 do 98 % relativne vlažnosti ponuja naprava optimalne pogoje za reproducibilne testne postopke v raziskavah, razvoju, zagotavljanju kakovosti in industriji. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4034 Prostornina testnega prostora: približno 335 litrov Dimenzije testnega prostora: približno 580 × 765 × 750 mm (Š × G × V) Zunanje dimenzije: približno 780 × 1.758 × 1.800 mm (Š × G × V) Teža: približno 515 kg neto Temperaturno območje: -40 °C do +180 °C Sprememba temperature (ogrevanje): približno 3,2 K/min Sprememba temperature (hlajenje): približno 3,5 K/min Odklon temperature: ±0,1 do ±0,5 K Homogenost temperature: ±0,5 do ±1,5 K Območje vlažnosti: 10 do 98 % relativne vlažnosti Odklon temperature pri klimatskem delovanju: ±0,1 do ±0,3 K Homogenost temperature pri klimatskem delovanju: ±0,5 do ±1,0 K Priključitev na omrežje: 3/N/PE AC 400 V +10 % / 50 Hz Nazivna moč: 4,1 kW Nazivni tok: 12,5 A Oprema: Upravljanje s pomočjo zaslona na dotik Testni prostor iz nerjavečega jekla Okno v vratih Osvetlitev testnega prostora Stranska odprtina Rešetka Hfodpezng Unofx Adkek Sistem z zračno hladitvijo Dokumentacija / navodila za uporabo Dodatna oprema v skladu s slikami Področja uporabe: Temperaturni testi Klimatski testi Simulacije okoljskih razmer Preizkušanje materialov Preizkušanje elektronike Zagotavljanje kakovosti Raziskave in razvoj Razvojni in obremenitveni testi Stanje: Rabljeno Klimatska testna komora je v rabljeno stanju. Vizualno stanje ustreza starosti in je razvidno na slikah. Obseg dobave: Vötsch VC 4034 klimatska testna komora Rešetka Upravljalna plošča / krmilnik Dodatna oprema v skladu s slikami Miza ali drugi predmeti, ki niso izrecno omenjeni na slikah, niso del ponudbe. Po dogovoru je možen prevoz s špediterjem ali osebni prevzem. Pridržujemo si pravico do sprememb, napak in medčasne prodaje.

Stanje: zelo dobro (rabljeno), Na prodaj klima komora Vötsch VT 7004, namenjena natančnim raziskavam in testiranjem v nadzorovanih temperaturnih pogojih. Naprava se uporablja v laboratorijih, oddelkih za nadzor kakovosti, pri raziskavah materialov, v elektroniki in avtomobilski industriji. Komora je opremljena z elektronskim regulatorjem temperature, učinkovitim hladilnim sistemom in prisilnim kroženjem zraka, ki zagotavlja enakomerno porazdelitev temperature po celotni delovni komori. Notranjost, izdelana iz nerjavečega jekla, olajša čiščenje in zagotavlja visoko vzdržljivost. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Model: VT 7004 Leto izdelave: 2000 Serijska številka naprave: 58566024350010 Napajanje: 230 V AC, 50 Hz Nazivna moč: 2,0 kW Nazivni tok: 10 A Hladilno sredstvo: Hsdpfxozi U Tne Adkofk R404A – 0,7 kg R23 – 0,22 kg Najvišji dovoljeni delovni tlak: 25 bar Notranjost: nerjaveče jeklo Elektronski regulator temperature Prisilno kroženje zraka Vrata s silikonsko tesnilom Osvetlitev in servisni dostop v komori Kompaktna konstrukcija Stanje: Naprava je bila uporabljena. Vizualno v dobrem stanju. Komora je čista in popolna. Prodaja se v stanju, kot je prikazano na slikah.

Stanje: zelo dobro (rabljeno), Naprodaj je profesionalna klimatska komora Vötsch VTL 7010, namenjena izvajanju temperaturnih testov in simulacij okoljskih razmer. Naprava se uporablja v laboratorijih, oddelkih za nadzor kakovosti, raziskovalno-razvojnih centrih ter pri testiranju elektronskih, avtomobilskih in mehaničnih komponent. Komora je delujoča – na dotik občutljiv zaslon se pravilno prižge, prikazuje glavni meni in trenutno delovno temperaturo, kar potrdijo tudi fotografije. Tehnični podatki: Proizvajalec: Vötsch Industrietechnik GmbH Model: VTL 7010 Leto proizvodnje: 2010 Temperaturni razpon: od -70 °C do +180 °C Hitrost ogrevanja/hlajenja: približno 3,5 K/min Hladilno sredstvo: R404A – 0,8 kg R23 – 0,2 kg Napajanje: 230 V AC, 50 Hz Nazivna moč: 3,5 kW Nazivni tok: 15,2 A Delovni tlak: 8 bar Upravljanje prek barvnega zaslona na dotik Delovna komora iz nerjavečega jekla Vrata z opazovalnim oknom Nastavljive notranje police Oznaka CE Uporaba Naprava je idealna za: Hodpozi T Nhsfx Adkefk temperaturna testiranja, raziskave materialov, testiranje elektronike in komponent, raziskave trdnosti, nadzor kakovosti, raziskovalno-razvojna dela. Stanje: rabljena, delujoča, upravljalna plošča deluje pravilno, notranja komora je čista in dobro vzdrževana, običajne sledi uporabe, prodaja se v stanju, kot je prikazano na fotografijah. V kompletu: klimatska komora Vötsch VTL 7010, 2 perforirani polici, vgrajena upravljalna plošča.