Cts Temperaturna Komora 2000 Litrov nakup rabljenega (10.591)

Stanje: zelo dobro (rabljeno), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal supports to increase floor load capacity. Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: Bodszh Htwopfx Ag Ejdd 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to call us.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Bsdpozh D E Rsfx Ag Eodd Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters Bdjdszg Eygopfx Ag Ejd - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Bdjdpfx Agozgbmio Eod Technical Data: Mechanical loading data: Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control unit: Touch panel All control and operating commands can be activated on the touch panel simply by touching the function icons. Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs Feedthroughs are integrated into the right and left sides of the test chamber. These allow measuring cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Bdjdpfx Agjzga Huj Esd Temperature test specifications: Temperature range: -42 to +180 °C Temperature deviation over time at chamber center: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation max. 2500 W Operating data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, rated power 7.8 kW Customer-side fuse: 16 A slow-blow Sound pressure level: Measured at 1m distance from the front, height 1m: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and specifications!) We will be happy to answer any further questions by telephone.

Stanje: zelo dobro (rabljeno), Here we offer a temperature test chamber. Feutron Temperature Test Chamber, Air-Cooled Test Chamber Nominal Volume: 280 liters Dimensions: Chamber external: Width 1,540 mm x Height 2,090 mm x Depth 1,240 mm With fan motor and door removed: Width 1,540 mm x Height 1,940 mm x Depth 925 mm Test chamber interior: Width 720 mm x Height 690 mm x Depth 560 mm Door, clear opening: Width 720 mm x Height 690 mm Viewing window, heated: Width 500 mm x Height 600 mm External dimensions with doors open: Width 2,340 mm x Height 2,090 mm x Depth 2,165 mm Feedthroughs: 2 pieces, side wall left, diameter 100 mm Temperature range Bdsdpfjzgah Sex Ag Ejd -70°C to +180°C Heating rate: 3.0 K / min Cooling rate: 3.0 K / min Power supply: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 Important information for buyers for your safety! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Specifications and technical details subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS TS-70/200-5/S temperaturna testna komora Proizvajalec: CTS Clima Temperatur Systeme GmbH Tip: TS-70/200-5/S Tip stroja: temperaturna testna komora / stresno-screening testna komora Volumen testne komore: pribl. 200 litrov Na prodaj je rabljena temperaturna testna komora proizvajalca CTS. Testna komora je primerna za temperaturna testiranja, stresno-screening, simulacijo okoljskih pogojev, testiranje materialov, zagotavljanje kakovosti ter razvojne in obremenitvene teste. Tehnični podatki Temperaturno območje: -70 °C do +180 °C Hitrost spremembe temperature (gretje): pribl. 8 K/min Hitrost spremembe temperature (hlajenje): pribl. 6 K/min Najv. emisija toplote pri +20 °C: pribl. 3500 W Mere testne komore pribl.: 650 x 400 x 750 mm (Š x G x V) Mere ohišja pribl.: 920 x 1345 x 1800 mm (Š x G x V) Teža pribl.: 550 kg Priključek na omrežje: 400 V 3/N / 50 Hz Bdedpfszf Hi Hsx Ag Ejd Moč: 10,9 kW Nazivni tok: 15,7 A Stopnja zaščite: IP22 Hladilno sredstvo, predhlajenje: R404A Količina hladiva, predhlajenje: 2,5 kg Hladilno sredstvo, hladilna stopnja: R23 Količina hladiva, hladilna stopnja: 0,6 kg / 15 bar Obratovalni nadtlak PS: 25 bar Preskusni tlak PT: 20 bar Oprema Upravljanje prek zaslona na dotik Opazovalno okno v vratih Notranjost iz nerjavečega jekla Osvetlitev testne komore Stranske preboje po slikah Vložne police / oprema testne komore po slikah Zaščita preizkušancev pred previsoko temperaturo Varnostni regulator Eurotherm RS232-vmesnik Dokumentacija / gradiva po slikah Področja uporabe Temperaturno testiranje Stresno-screening Simulacija okoljskih pogojev Testiranje materialov Preskušanje elektronike Zagotavljanje kakovosti Raziskave in razvoj Obseg dobave 1x CTS TS-70/200-5/S temperaturna testna komora Vložne police / oprema testne komore Obstoječa dokumentacija / gradiva Dodatna oprema po slikah Stanje Rabljeno Vizualno stanje po slikah Obseg dobave kot je prikazano. Spremembe in napake v tehničnih podatkih ter predhodna prodaja so pridržane.

Stanje: zelo dobro (rabljeno), Vötsch VC 4060 klimatska testna komora Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC 4060 Tip stroja: klimatska testna komora / temperaturna testna komora Testni volumen: ca. 600 litrov Krmiljenje: S!MCON / 32 Hlajenje: vodno hlajeno Hladilno sredstvo: R452A Naprodaj je rabljena klimatska testna komora proizvajalca Vötsch. Komora je primerna za temperaturna in klimatska testiranja, simulacijo okoljskih pogojev, preizkušanje materialov, zagotavljanje kakovosti ter razvojne in obremenitvene teste. Tehnični podatki Notranje mere komore: ca. 800 x 800 x 950 mm (Š x G x V) Zunanje mere ohišja: ca. 1090 x 1960 x 1995 mm (Š x G x V) Teža: ca. 600 kg neto Temperaturno območje: -40 °C do +180 °C Hitrost spremembe temperature - segrevanje: ca. 4,0 K/min Hitrost spremembe temperature - hlajenje: ca. 3,0 K/min Časovno temperaturno odstopanje: ±0,1 do ±0,5 K Prostorsko temperaturno odstopanje: ±0,5 do ±2 K Temperaturni gradient: ca. 1 do 4 K Klimatski razpon temperature: -10 °C do +95 °C Območje vlage: 10 % do 98 % r. v. Odstopanje vlažnosti: ±0,1 do ±3 % r. v. Časovno temperaturno odstopanje v klimatskem načinu: ±0,1 do ±0,3 K Prostorsko temperaturno odstopanje v klimatskem načinu: ±0,5 do ±1,0 K Temperaturni gradient v klimatskem načinu: ca. 1 do 2 K Električni priklop: 3/N/PE AC 400 V ±10 % / 50 Hz Nazivna moč: 7,8 kW Nazivni tok: 15,0 A Zaščita: 16 A počasna, na strani uporabnika 1 preboj Ø 50 mm levo vgrajen 1 preboj Ø 125 mm desno vgrajen Testni prostor iz nerjavečega jekla Upravljanje preko zaslona na dotik Oprema Krmilnik S!MCON / 32 Upravljanje preko zaslona na dotik Notranjost iz nerjavečega jekla Osvetlitev testnega prostora Stranska preboja Ø 50 mm in Ø 125 mm Police / oprema testnega prostora po slikah Vodno hlajen sistem Dokumentacija / navodilo za uporabo Priložena oprema glede na slike Področja uporabe Preizkus temperature Klimatsko testiranje Simulacija okolja Preizkušanje materialov Preizkušanje elektronike Zagotavljanje kakovosti Raziskave in razvoj Obseg dobave 1x Vötsch VC 4060 klimatska testna komora Dokumentacija / navodilo za uporabo Pribor po slikah Bedpfxozf E E To Ag Eodd Stanje Rabljeno Vizualno stanje po slikah Ogled možen po predhodnem dogovoru Opomba: Naprava je bila predelana na hladilno sredstvo R452A. Obseg dobave kot na slikah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje.

Stanje: zelo dobro (rabljeno), Here we offer you a Thermotron temperature chamber. Water-cooled Thermotron Temperature Chamber SE-1000-6-6 Internal dimensions (W x D x H): 1000 x 1000 x 980 mm Usable volume: approx. 980 litres Temperature range: -70°C to 180°C Overall heating rate: approx. 4.1 K Overall cooling rate: approx. 1.2 K Heating rate in °C/min, -65°C to 71°C: 6.8°C Heating rate in °C/min, -65°C to 180°C: 5.6°C Heating rate in °C/min, -40°C to 85°C: 6.5°C Cooling rate in °C/min, 85°C to -40°C: 4.7°C Cooling rate in °C/min, 71°C to -65°C: 3.7°C Cooling rate in °C/min, 180°C to -65°C: 4.3°C External dimensions (W x D x H): 1250 x 1900 x 2200 mm Electrical requirements: 400V/5P/N/PE, 35 A Refrigerants: R508B and R404A Approx. weight: 900 kg Type: Thermotron SE-1000-6-6 For your safety as a buyer, please note the following: The following procedures are carried out on all chambers we offer in advance: 1. Functional test and replacement of necessary components 2. Refilling with legally compliant refrigerants 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Bdsdpfxjzd R T Hs Ag Esd Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Bdodpfx Agjzd R Tgs Eod Rated power: 10 kW, Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, we provide the following information! The following steps are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) For further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for Climatic Testing: Temperature range: +10°C to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port Ø approx. 50 mm, left side 2 ports Ø approx. 125 mm, left side 1 port Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as the buyer, please note the following: The following procedures are carried out in advance on all our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) Bdedpfoxufypex Ag Ejd (Specifications are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS temperaturna testna komora T-40/25 Tehnični podatki Proizvajalec: CTS Clima Temperatur Systeme Tip: T-40/25 Temperaturno območje: -40 °C do +180 °C Volumen testne komore: 25 litrov Hitrost spremembe temperature: Ogrevanje: 8,0 K/min Hlajenje: 6,5 K/min Časovno temperaturno odstopanje: ±0,5 do ±1 K Dimenzije testne komore (Š x G x V): 350 x 240 x 300 mm Zunanje dimenzije (Š x G x V): 595 x 580 x 860 mm Električni podatki: Nazivna napetost: 230 V 1/N 50 Hz Nazivna moč: 1,86 kW Nazivni tok: 8,53 A Stopnja zaščite: IP20 Hladilno sredstvo: R404A Količina polnjenja: 0,8 kg Obratovalni nadtlak: 25 bar Preskusni tlak: 20 bar Oprema: LCD upravljalna enota Digitalni prikaz nastavljene/dejanskih vrednosti Bdsdpfezcxmtsx Ag Eod RS232 vmesnik Testna komora iz nerjavečega jekla, material 1.4301 Okno 200 x 200 mm Zaklenljiva vrata Zračno hlajena hladilna enota EASYLog podatkovni zapisovalnik 3 polic iz nerjavečega jekla Teža: pribl. 90 kg Za varnost naših strank izvajamo naslednja dela na ponujenih klimatskih komorah vnaprej: 1. Preverjanje delovanja in menjava potrebnih komponent 2. Po potrebi novo polnjenje s hladilnim sredstvom v skladu z zakonodajo 3. Preizkus tesnosti s certifikatom 4. Dokumentiran poskusni zagon po uspešnem pregledu Stanje: rabljeno Obseg dobave: (glej sliko) Ogled po dogovoru mogoč. Nakladanje je možno organizirati. (Spremembe in napake v tehničnih podatkih so pridržane!) Dodatna vprašanja z veseljem odgovorimo po telefonu.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with touch panel) Features of this control system: - Color touchscreen with intuitive menu navigation (usually 5.7" or larger) - Programming of temperature/humidity profiles with ramp and dwell times - Data acquisition & logging (e.g., temperature progression, alarms) - USB port for data export (CSV, S!MPATI-compatible if applicable) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optional Modbus or Profibus VT³ 4100 – Technical Data (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min - Maximum thermal compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Interior dimensions (W×D×H): 1100 × 950 × 950 mm - Exterior dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is fitted with port openings on the right and left sides. These allow measurement lines and test devices to be routed into the test space. - 1 x L1 DN 50 mm - 1 x R1 DN 125 mm - 3 x R1 DN 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Sound level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Where needed, refilling with a legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Bdsdpfx Agjygvm Es Esd Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical specifications and details!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber T-70/600 Water-cooled Temperature range: -70°C to +180°C Bjdpfx Aeygulteg Ejdd Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test item control Shelving: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total max load for full shelf setup: 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Temperature change rate measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refers to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without auxiliary equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, new filling with legally approved refrigerant 3. Leak test with certificate 4. After successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and information subject to confirmation!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss temperature test chamber. Weiss temperature test chamber with S!MCON / 32 controller, water-cooled Control unit: "Touchpanel" All control and operation commands can be initiated simply by touching the function symbols on the 'touchpanel' control unit. Bdsdpfsyguh Iex Ag Esd Leveling feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to ensure adequate ventilation of the machine components. Access ports The test chamber is equipped with access ports on the right and left sides. Through these, measuring cables and test devices can be routed into the test chamber. Standard access ports installed: R1: DN 125 mm L1: DN 50 mm (Refrigerant converted to R-452A) Test space volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature test data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable volume: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature change rate (according to IEC 60068-3-5): Heating: 4.0 K/min Cooling: 3.0 K/min Heat compensation: max. 2500 W Operating data: Test chamber lighting: Halogen bulb, 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power: 7.8 kW Main fuse (customer-provided): 16 A, slow-blow Sound pressure level: Measured at 1m distance from the front, 1m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) If you have any questions, feel free to contact us by phone.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D Bsdjxdi Ezopfx Ag Eodd • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Bedpfx Agezg Twaj Ejdd Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC 7018 Vötsch Climate Test Chamber VC 7018 Water-cooled Control Unit »Touch Panel« All control and operation commands can be initiated easily by touching the function icons on the »Touch Panel«. Leveling Feet To compensate for floor unevenness and ensure adequate ventilation of the machine components, the test chamber is equipped with adjustable feet. Feed-throughs Feed-throughs are fitted on both the right and left sides of the test chamber. These allow test leads and testing devices to be routed into the test space. Feed-throughs come as standard: R1: nominal width 125 mm L1: nominal width 50 mm Test Space Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Bodpfjzh Huhox Ag Ejdd Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ±0.1 to ±0.5 K Spatial deviation: ±0.5 to ±2.0 K Temperature change rate in accordance with IEC 60068-3-5: Heating: 4 K/min. Cooling: 2.3 K/min. Specifications for Climate Testing: Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH Temporal temperature deviation at center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation at center: ±1 to ±3 % RH Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Power cable: 3.5 m Fuse protection: 16 A slow-blow, to be provided by buyer Refrigerants: R-404A and R-23 Test Chamber Volume: approx. 190 liters Weight: approx. 460 kg net For your safety as buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Technical specifications and information are subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Temperature test chest with spray device Technical Description: Bdodpfx Ajzh D S Rog Ejd Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Climats Type: EXCAL 1413-HA Air-Cooled Climate Chamber The EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports, ensuring state-of-the-art technology. Technical Specifications: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Bjdpozh D Rtsfx Ag Eedd Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Viewing window: 350 x 380 mm Chamber volume: 138 liters Feedthroughs included as standard: R1: 80 mm Ø L1: 80 mm Ø Data for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.8 K Rate of temperature change: Heating: 15 K/min Cooling: 10 K/min Data for climate testing: Temperature range: +10°C to +90°C Humidity range: 10 to 98% RH Operating data: 3/N/Ph+T 400V±10% 50 Hz Rated power: 9.8 kVA Refrigerants: R-404A / R-23 Weight: 430 kg For your safety as a buyer, please note the following information: The following procedures are carried out on all chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications may be subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), ESPEC TSA-72EL-A Klimatska komora za temperaturni šok Proizvajalec: ESPEC Corporation Tip: TSA-72EL-A Bjdpszhkfqjfx Ag Eodd Tip stroja: Klimatska komora za temperaturni šok / Thermal Shock Chamber (2-conska) Izvedba: Vodno hlajena Naprodaj je rabljena ESPEC klimatska komora za temperaturni šok tip TSA-72EL-A. Naprava je primerna za ponovljive preizkuse temperaturnih sprememb in termičnih šokov v raziskavah, razvoju, zagotavljanju kakovosti ter v elektroniki, avtomobilski industriji, letalstvu in materialnih testiranjih. Preklapljanje med vročo in hladno komoro poteka samodejno preko 2-conske dušilne lopute. Tehnični podatki Volumen testnega prostora: pribl. 70 litrov Notranje mere (Š × V × G): 410 × 460 × 370 mm Zunanje mere (Š × V × G): 1.310 × 1.900 × 1.470 mm Teža: pribl. 900 kg Temperaturno območje vroče komore: +50 °C do +200 °C Temperaturno območje hladne komore: -65 °C do 0 °C Temperaturna stabilnost: ±0,5 °C Predgretje: do +205 °C Predhlajenje: do -75 °C Čas segrevanja: s sobne temperature na +200 °C v pribl. 15 minutah Čas hlajenja: s sobne temperature na -70 °C v pribl. 40 minutah Čas obnovitve temperature: ≤ 5 minut Maks. testna obremenitev: 30 kg enakomerno porazdeljeno Prevod za kable: Ø 50 mm Priklop stisnjenega zraka: 0,4 do 0,7 MPa (4 do 7 barov) Hladilni sistem / Električni priklop Hladilni sistem: Mehanska kaskadna klimatska naprava Hladilno sredstvo, visokotemperaturna stran: R404A Hladilno sredstvo, nizkotemperaturna stran: R23 Kondenzator: Vodno hlajen Priklop na omrežje: AC 380 / 400 / 415 V 3 faze / 50 Hz Največja priključna moč: 45 A Oprema 10,4" TFT barvni zaslon na dotik PID regulacija temperature Programski pomnilnik (RAM/ROM) Trend grafika Zgodovina alarmov RS-485 vmesnik Eko način delovanja Samodejno odtaljevanje Vertikalna drsna vrata Inox testni prostor 2 inox testni polici Mehanski kaskadni hladilni sistem Elektronski ekspanzijski ventil Sirocco krožni ventilator Pnevmatsko preklapljanje dušilne lopute Prevod za kable Ø 50 mm Področja uporabe Preizkusi temperaturnega šoka Testiranje temperaturnih sprememb Testiranje elektronike Testiranje polprevodnikov Avtomobilska industrija Materialna testiranja Preizkušanje komponent Zagotavljanje kakovosti Raziskave in razvoj Stanje Rabljeno Vizualno stanje skladno s slikami. Obseg dobave ESPEC TSA-72EL-A klimatska komora za temperaturni šok 2 inox testni polici Dodatki skladno s slikami Dobava kot na slikah. Spremembe, napake in predhodna prodaja pridržane.

Stanje: dober (rabljeno), H. Köhler HK 300 S Kesternich-korozijski preizkusni aparat Proizvajalec: H. Köhler GmbH Tip: HK 300 S Leto izdelave: neznano Tip stroja: Kesternich-korozijski preizkusni aparat / SO₂-korozijska preizkusna komora Volumen preizkusnega prostora: pribl. 300 l Naprodaj je rabljeni H. Köhler HK 300 S korozijski preizkusni aparat za izvajanje Kesternich oziroma SO₂-korozijskih preizkusov v skladu z DIN 50017 / DIN EN ISO 6988. Naprava je primerna za korozijske preizkuse na kovinah, premazih, lakih in sestavnih delih v laboratoriju, raziskavah, razvoju ter v kakovostni kontroli. Tehnični podatki Volumen preizkusnega prostora: pribl. 300 l Temperaturno območje: sobna temperatura do pribl. +55 °C Obratovanje vlažnosti: možen režim nasičenja Ogrevanje preizkusnega prostora: 1.000 W Priključna moč: pribl. 1.100 W Električni priključek: 230 V / 50 Hz Poraba stisnjenega zraka: pribl. 3 Nm³/h Priključek za stisnjen zrak: 4,5 – 7,0 bar Priključek za demineralizirano vodo: 2,5 – 4,0 bar Tlak pršenja: 0,7 – 1,5 bar Dimenzije (Š × G × V): pribl. 1.200 × 600 × 1.750 mm Teža: pribl. 100 kg Krmiljenje HK PC102 mikroprocesorsko krmiljenje LCD zaslon Programabilni testni postopki Regulacija temperature Oprema Preizkusni prostor iz nerjavečega jekla Veliko opazovalno okno Naprava za doziranje plina Prezračevalni sistem Regulacija temperature Termometer za preizkusni prostor Manometer Priključek za stisnjen zrak Priključek za demineralizirano vodo Priključek za odvod zraka Navodila za uporabo priložena Dokumentacija za vzdrževanje priložena Izjava o skladnosti CE priložena Področja uporabe Kesternich testiranje SO₂-korozijsko testiranje Korozijska testiranja Testiranje premazov Testiranje lakov Materialni testi Avtomobilska industrija Kontrola kakovosti Raziskave in razvoj Stanje Rabljeno / Used Vizualno stanje skladno s slikami. Obseg dobave H. Köhler HK 300 S korozijski preizkusni aparat Navodila za uporabo Izjava o skladnosti CE Bsdpezg U Tiefx Ag Eodd Vzdrževalna dokumentacija Dokumentacija Pribor v skladu s prikazanimi slikami Obseg dobave kot na slikah. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: dober (rabljeno), Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance Data for Temperature Tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Bdsdpfx Agozg Twgo Ejd Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climate Tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and correction!) If you have further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 34/60 Weiss Climate Chamber, Air-Cooled Refrigerant converted to R-452A -60°C to +150°C Chamber volume: 34 liters Feedthroughs included in standard configuration: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm, Width 324 mm, Depth 300 mm External dimensions: Height 1740 mm, Width 630 mm, Depth 970 mm Performance Data for Temperature Testing: Temperature range: -60 to +150 °C Temperature variation in stabilized state (per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 1 K, ± 1 to ± 2 K Spatial temperature deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Performance Data for Climate Testing: Temperature range: +10 to +95 °C Bdodpfezgr U Rsx Ag Ejd Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (in stabilized state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.h. Operating Data: Test chamber lighting: Halogen bulb 12V, 20W Nominal voltage: 1/N / PE AC 230 V ± 10 %, 50 Hz Nominal power: 2.5 kW Nominal current: 11 A Required customer-side fuse: 16A slow-blow Heat dissipation for air-cooled chambers: Max. heat emission to environment: 1700 W Refrigerants: R-452A / R23 Weight: 140 kg For your safety as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors, all details are non-binding!) If you have any further questions, we are happy to answer your calls.

Stanje: zelo dobro (rabljeno), Vötsch VC³ 0034 klimatska testna komora Bdjdezgb Awopfx Ag Esd Proizvajalec: Vötsch Industrietechnik GmbH Tip: VC³ 0034 Tip stroja: Klimatska testna komora / klimatska komora Prostornina testnega prostora: pribl. 335 litrov Na prodaj je rabljena klimatska testna komora Vötsch za temperaturna in klimatska testiranja v laboratoriju, raziskavah, razvoju ter zagotavljanju kakovosti. Tehnični podatki Notranje mere testnega prostora: pribl. 580 x 765 x 750 mm (Š x G x V) Zunanje mere ohišja: pribl. 875 x 1860 x 1805 mm (Š x G x V) Temperaturno območje: -10 °C do +90 °C Območje vlažnosti: 10 do 98 % r.h. Območje rosišča: +4 °C do +89,5 °C Temperaturna homogenost: ±0,5 do ±1 K Temperaturno odstopanje: ±0,1 do ±0,5 K Hitrost segrevanja: pribl. 1 K/min Hitrost hlajenja: pribl. 0,3 K/min Maks. toplotna kompenzacija: pribl. 200 W Hladilno sredstvo: R404A Količina polnjenja: 0,6 kg Maks. nizki tlak (ND): 25 bar g Maks. visoki tlak (HD): 25 bar g Električni priključek: 230 V / 50 Hz Nazivna moč: 2,3 kW Nazivni tok: 10 A Razred zaščite: IP54 Teža: pribl. 490 kg Oprema SIMPAC krmiljenje Regulacija temperature in vlage Testni prostor iz nerjavečega jekla Ethernet, USB, RS232, RS485/422 Funkcija zaščite testiranega izdelka Prehodi za kable Področja uporabe Klimatsko testiranje Temperaturno testiranje Testiranje materialov Testiranje elektronike Zagotavljanje kakovosti Raziskave in razvoj Obseg dobave Vötsch VC³ 0034 klimatska testna komora Pribor po slikah Stanje Rabljeno Vizualno stanje kot na fotografijah Za varnost naših strank so vse ponujene klimatske komore pred dostavo pregledane, po potrebi napolnjene z zakonito dovoljenim hladilnim sredstvom, podvržene testu tesnosti in izročene z dokumentiranim testnim zagonom. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje.