Klimatska preizkusna celica s prostornino 5500 litrov (5,5 m³)

CTS CW-60/5,5 -60°C bis +100°C

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone. Ncedpfx Asx Eaxbsfmeu

Stanje: rabljeno, Hladilna/zamrzovalna komora Viessmann -Zunanje mere: 3300 x 2100 x 2450 mm -Notranje mere: 3100 x 1900 x 2250 mm -Deblina plošč: 100 mm -Svetla širina vrat: 800 mm -Tla iz nerjavečega jekla -Stenski hladilni agregat vključen -Stanje zaloge: 1 kos -Komora enostavna za montažo Ncodpfxsxqpgro Afmeu

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: Ncsdpsx D Abpjfx Afmeu - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: novo, številka stroja/vozila: 1900040028, dolžina transportnega traku: 1.700 mm, širina transportnega traku: 440 mm, hitrost transportnega traku: 57 mm/s, moč: 0,18 kW (0,24 KM), vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, Voran conveyor belt 1,700 x 440 mm Ncodpfetv E Dijx Afmeu FDA compliant

Stanje: zelo dobro (rabljeno), Weiss Type: WK 27'/50-150 Climatic Chamber Water-Cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor Load Capacity: 30000 N/m² (Surface Load) Test Chamber Volume: Approx. 27,000 Litres Sample Mass: 1000 kg Cooling/Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Stability: ±0.3 to 1.0 K (Over Time) Temperature Stability: ±0.1 to 0.5 K (Over Time) Nodpfxovx Nfbs Afmscu Climatic Operation: 10 – 90°C Humidity: 10...98% rH Temperature Stability: ±0.1 to 0.5 K (Over Time) Dew Point Range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A With additional base plates to increase floor load capacity Important Safety Information for Buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Further questions gladly answered by phone.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, stiskalna sila: 15 t, Hidralmac C-frame Press – 15 t – Assembly Press – Manual Combination Press For sale is a compact hydraulic C-frame combination press from Hidralmac with a press force of 15 t. This machine is a custom manual version and is ideal for flexible assembly, straightening, and pressing operations in workshop and service environments. The table can be swung out to the left. The lower base plate can be inserted at three different heights. The press ram can be manually lowered using the cross handle. Special features of this press: The operator can apply very precise pressure from 0 to 1.5 t. This is especially important, for example, when pressing in ball bearings. We have supplied this press type multiple times to the aerospace industry, where precise and careful operation is vital. Once the precise positioning is done, the hand pump allows you to build up a pressure of up to 15 t. ##### Technical Data & Information: Assembly/Disassembly Press – 15 t – 270 × 600 mm ==== General Information - Design: C-frame / manual hydraulic press - Manufacturer: DURENDUS - Press force: 0–15 t - Table size: 270 × 600 mm - Installation height: 650 / 800 mm - Table height from floor: 750 mm - Table hole: Ø 60 mm - Distance from lower recess to table: 450 mm - Overall dimensions (W×D×H): 900 × 850 × 2,300 mm - Total weight: approx. 800 kg - Frame: welded steel frame - Table: swing-out - Lower table: adjustable height (3 positions) ==== Hydraulic Cylinder - Ram stroke: 150 mm - Piston rod diameter: Ø 80 mm - Cylinder diameter: Ø 100 mm - Max. working pressure: 250 bar ==== Hydraulics & Drive - Drive: manual via hand lever and hand pump - Precision pressure control: 0–1.5 t via cross handle - Hand pump: 0.5 l - Pressure display: manometer ==== Controls - Operation: manual via hand lever and cross handle - Pressure regulation: mechanically sensitive adjustment ==== Safety - Anti-twist device - Stable frame construction ##### Application areas: Pressing-in, pressing-out, assembly, disassembly, straightening, bearing technology, workshop operations, maintenance, fine assembly, service applications, small batch production Hydraulic press, hydraulic assembly press, disassembly press, workshop press, 15 t press, 15 ton press, manual hydraulic press, C-frame press, single-column press, C-press, hand press, pressing-in press, bearing press, industrial press Ncsdpfsfhcc Ijx Afmeu Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply fully with the national Brazilian safety guideline NR 12, which builds upon these. Our core strength is in custom machine building and press automation. We provide bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Stanje: rabljeno, Leto izdelave: 2017, potovalna razdalja osi X: 435 mm, pomik osi Y: 465 mm, pomik po osi Z: 560 mm, teža obdelovanca (maks.): 80 kg, skupna višina: 2.755 mm, skupna dolžina: 3.360 mm, skupna širina: 3.870 mm, skupna masa: 8.500 kg, nos vretena: MAS BBT 40, Matsuura MX-330 - PC10 Vertikalni 5-osni obdelovalni center CNC krmiljenje Matsuura G-Tech 31 i Velikost mize: ø 130 mm Nosilnost mize: 80 kg Število palet: 10 Njdoy Ny Akjpfx Afmscu Največji premer x višina obdelovanca: 330 x 300 mm Pomik po X-osi: 435 mm Pomik po Y-osi: 465 mm Pomik po Z-osi: 560 mm C-os (vrtenje mize): 360° A-os (nagib mize): -125/+10° Hitrost vretena: 50 – 15.000 min⁻¹ Vreteno MAS BBT 40 Moč vretena: 7,5/5,5 kW Kapaciteta zalogovnika: 90 Za vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge.

Stanje: rabljeno, Leto izdelave: 2020, Two machines from 2020 (G5 i) and one machine from 2022 (G5) available. Including hydraulic unit, oil cooler, and air dryer Initial commissioning of the 2020 machines in March/May 2022, the 2022 machine in March 2023. The machining centre can be used for grinding, milling, and drilling of metallic workpieces. As standard for these machines, an integrated dressing device is included. The machining centre is employed for hard grinding and boring of openings in discs and flanges of high-precision planetary gearboxes. Machine description Makino Model G5 i Grinder Universal Machining Centre With creep feed grinding capability Makino Professional 5 CNC controller Machine specifications (according to manufacturer) Linear axes Column X-axis: 520 mm Spindle Y-axis: 560 mm Table Z-axis: 600 mm Spindle centre to top of pallet: 80 – 640 mm Spindle nose to pallet centre: 70 – 670 mm Feed rates Minimum increment: 0.001 mm Jog mode: 1 – 8,000 mm/min Machining feed: 1 – 48,000 mm/min Rapid traverse: 48 m/min Spindle Spindle taper: ISO 40 Spindle motor (high torque): 18.5 / 22 kW AC Speed range (2 ranges): 50 – 12,000 rpm Automatic tool changer Machine weight 8,450 kg Controlled axes 5-axis simultaneous Special equipment for VIPER grinding Dressing unit Rotary dressing unit (quick-change) – electric, including holder (52 mm) Electrical interface for dresser Workpiece clamping Erowa ER-029392 Power Chuck Clamping/release control including pressure gauge Coolant preparation and supply Water-based coolant filtration system Transfer tank High-pressure pump Self-tilting chip bin Coolant supply bridge Extraction system incl. pipework Makino interface for coolant system Makino interface for extraction Coolant monitoring (pressure, flow, temperature) Programmable coolant nozzle (PCN) – through spindle, nozzle, base and shower PCN nozzle assembly Miscellaneous Automatic workpiece measurement (RMP600) Point Master unit (manual probe) Bench Master Air dryer Special I/O interface Machine anchoring kit FANUC warranty (2 years) C&F costs UK/Euro transformer High-speed rotary workpiece spindle (100 rpm) Time-delayed splash guard Oil lubrication system for ball screws and linear guides Programmable coolant nozzle for grinding wheels (PCN) Reinforced splash guard door Automatic front door (AWC) with light curtain Signal lights (3-color) Halogen work light (1 pc) Safety interlock package Optional equipment Easy-Grind Max NC, incl. HMI and Machine Manager Scale system for X, Y, Z axes (0.05 µm) Nodpfx Ajywgh Nefmscu Change of display language from English to German Free rotation of rotary axes during operation Project management by NCMT and Melior Motion Easy-Grind Max+ (single-station solution, custom configured)

Stanje: rabljeno, -Außenmaße: 2600x2900x2110 mm -Innenmaße: 2400x2700x1950 mm -Wandstärke: 80 mm -Temperaturbereich: -2 bis +8 °C / -18 bis -23 °C -Kältemittel: R452A -Klimaklasse: 5 -Vormontiertes Kälteaggregat auf dem Paneel -Automatische Kondensatverdunstung -Innenbeleuchtung -Paneeloberfläche aus speziell für Lebensmittelanwendung beschichtetem Blech, Farbe lichtgrau Nodpfsx Eyhfox Afmocu -Modularer Aufbau mit Paneelen à 300, 600, 900 und 1200 mm -Paneelstecksystem mit Doppelhakenverschluss -Abgerundete Türen und innere Ecken im 45°-Winkel geschnitten -Ergonomischer Griff mit Schloss und Notöffnungssystem -Druckausgleichsventil -Edelstahlboden mit rutschfester Beschichtung -Umschlagbare, selbstarretierende Türen bei 90°, in zwei Größen erhältlich, lichter Durchgang von 600 und 700 mm -Schräghängende Türscharniere -FCKW-freie Polyurethan-Isolierung, hochdruckgeschäumt, Dichte 41 kg/m³

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Krmiljenje MAX5 DSM (2 x 19" zaslona) Velikost mize 762 x 406 mm X-hod 660 mm Y-hod 406 mm Z-hod 508 mm Hitrost vretena 10 – 12.000 min⁻¹ Magazin orodij 20 pozicij Vpenjalo SK40 Hitri pomiki X/Y/Z 28 m/min Moč 9,4/11 kW Tloris 2000 x 1800 x 2600 mm Teža stroja 2850 kg Oprema - Opcije programske opreme: 3D, DXF, AVG (realistična grafika), žepi/otoki, funkcija rampe, sinhrono rezanje navojev, orodna in materialna baza, NCPP in ISNC (makro-ISO-kodno programiranje), Ultimotion, sinhrono rezanje navojev Nedsy Du I Repfx Afmecu - Električni ročni kolešček - Sistem za hlajenje - Transportni polž za odrezke - Signalna luč - Noge za stroj