Cetingil Cmk nakup rabljenega (26)

Leto izdelave: 2025, stanje: novo, The Belt Conveyor Shot Blasting Machine is a modern device designed for cleaning, derusting, and surface preparation of metal components. With a continuous rubber or steel belt conveyor, workpieces are automatically transported through the blasting chamber, where high-performance turbines direct abrasive media onto the surfaces. This process removes rust, scale, sand, and paint residues, leaving a clean and uniform surface ready for painting, coating, or further processing. Iajdpfx Absxv Atijxsu The machine is ideally suited for foundries, the automotive industry, forges, and metalworking plants, where it efficiently cleans small and medium-sized parts such as castings, forgings, or hardened components. The belt conveyor ensures gentle handling of parts and even blasting on all sides, while the automatic abrasive recovery and air filtration system guarantees cost-effective and environmentally friendly operation. Thanks to its energy-efficient design, low operating costs, and high performance, the belt conveyor shot blasting machine is an excellent solution for production lines requiring consistent quality and short processing times.

Leto izdelave: 2025, stanje: novo, ASK - 0 Hanger Type Shot Blasting Machine Iedpfsvkf Agjx Abxjau This machine is used for polishing of sheet and metal parts after pressing and heat treatment, cleaning and roughening of castings, preparation prior to painting and rubber coating, transferring forged parts onto trolleys, and refurbishment of used parts. (Workpiece Capacity x Diameter): Ø: 800 H: 700 Equipped with 2 turbines, each Ø 325 mm, 6-bladed. The blasting cabin is manufactured from ST-37 grade steel sheet, with the high-wear zones reinforced using Brinell or manganese wear plates. The inside of the cabinet is lined with rubber sheets to protect against abrasion during the blasting process; these are mounted to the cabinet with clamping strips. (Fully manganese armored internal lining is available as an option.) The wear plates are of a bolted (screw-in) design, allowing easy replacement by authorized personnel when necessary due to wear. The machine cabin doors, offered in both pneumatic and manual versions, are double-winged design for convenient access. To ensure operator safety, the doors feature an interlock system to prevent them from being opened during the shot blasting cycle. Additionally, a sensor or switch is integrated into the door mechanism, which halts the blasting operation if the door is open. The system is fitted with a rail conveyor, suspension gear mechanism, and (optionally) a crane, enabling easy transfer and handling of workpieces within the machine cabin. A fully automated electrical panel is included, featuring Siemens or Schneider components. Machine operation is controlled via a 10” PLC touchscreen display.

Leto izdelave: 2025, stanje: novo, Drum-type Shot Blasting Machine; Consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Sieve. Three rubber belts wound on drums rotate the barrel-shaped virtual chamber; during this process, the turbine propels steel shot onto the parts, achieving the blasting effect. The blasting cabin is manufactured from ST-37 steel plate; areas directly targeted by the turbines in the hot spot are lined with wear-resistant manganese steel, while other sections are reinforced with Hardox plate. (Full manganese steel lining is optional.) The wear-resistant plates are mounted with bolts to facilitate future replacement due to wear; they can be easily replaced by your authorized personnel. The bolted design of wear plates allows for convenient replacement by your company’s authorized staff when replacement is required due to abrasion. The dimensions of the TK-6 PREMIUM machine are as follows: Drum Diameter Ø: 1000 mm, Length between Discs L: 1200 mm, with a loading capacity of 800 kg. Turbine specifications: 2 x F300 type Ø 320 mm with 7.5 kW motor. Equipped with a Rubber Belt Conveyor. Iaodpevliucefx Abxsu

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, A Blast Room is an enclosed space used for cleaning, roughening, or preparing surfaces made of metal, concrete, stone, or wood. Inside the chamber, abrasive material (e.g., quartz sand, steel shot, aluminum oxide, corundum, or glass beads) is propelled at high speed using compressed air. This process removes rust, paint, oxides, or contaminants and achieves the desired surface roughness. Main Components of a Sandblasting Room: Working Chamber: Steel structure with walls lined with wear-resistant materials. Blasting Equipment (nozzle system): Mixes compressed air with abrasive material and directs it onto the surface to be treated. Dust Extraction System (air filtration): Removes dust from the air to maintain a clean working environment. Abrasive Recovery System: Collects used abrasive, cleans it, and enables its reuse. Operator Equipment: The operator wears protective clothing, an air-fed helmet, gloves, and a coverall. DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4,000 x 4,000 x 3,000 KO - 2 6,000 x 3,000 x 3,000 KO - 3 6,000 x 5,000 x 5,000 KO - 4 10,000 x 5,000 x 5,000 KO - 5 12,000 x 5,000 x 4,000 Ijdpfjxr Am Uox Abxsau KO - 6 15,000 x 5,000 x 5,000 KO - SPECIAL 27,000 x 18,000 x 9,000

Leto izdelave: 2025, stanje: novo, A sandblasting cabinet is a closed system designed for cleaning, roughening, or preparing the surfaces of small and medium-sized components prior to painting, coating, or further processing. Unlike large sandblasting chambers, the cabinet is compact and self-contained, allowing the operator to work in a controlled, dust-free, and safe environment. ⚙️ Main Features of the Sandblasting Cabinet Closed Working Area: The cabinet is fully sealed. The operator handles the process through rubber sleeves (gloves) and monitors the interior via a transparent protective window. Nozzle System (Sandblasting): Compressed air mixes with the abrasive media (e.g. sand, corundum, steel shot, glass beads) and impacts the surface of the workpiece at high speed. Internal Lighting: The cabinet interior is equipped with powerful LED lighting, ensuring excellent visibility during operation. Dust Extraction / Filtration System: Removes dust generated during sandblasting, cleans the air, and protects the operator's health. Abrasive Recovery System: Used abrasive falls into a hopper, is sieved, and is reused, making the process economical and environmentally friendly. Ergonomic Design: Features convenient working height, a large observation window, and foot pedal operation to facilitate work. 🧩 Types of Sandblasting Cabinets Pressure Cabinets: Discharge abrasive at high pressure — ideal for removing heavy rust, paint, and scale. Suction Cabinets (Venturi): Draw and accelerate the abrasive using air — suitable for delicate and precision work. Iaodpfjxr Awajx Abxju Automatic Cabinets with Rotary Table: Equipped with rotating tables, ensuring uniform and automatic surface treatment.

Leto izdelave: 2025, stanje: novo, Rulo Konveyörlü Kumlama Makinesi Sac, Profil ve Mamul Metal Ürün Kumlama Makinesi: Kabin, Türbin Sistemi, Konveyör Sistemi, Geri Dönüşüm Sistemi, Filtrasyon Sistemi, Kumanda Panosu ve Platformdan oluşur. Rulo Konveyörlü Kumlama Makineleri; Sac Kumlama Makineleri ve Profil Kumlama Makinelerinden oluşur. Malzeme, özel olarak imal edilmiş rulo konveyör üzerinde kabine iletilir. Yüzeyi temizlenen malzeme, kabinden çıkışta bir sonraki işleme (boyama, kaplama vb.) hazır hale gelir. Sac, NPI, NPU, Profil kumlama işlemlerinde kullanılır. Iedpfx Abevnrr Ajxoau Boyama öncesi pas alma, pürüzlendirme ve temizleme için idealdir. Kabin, ST-37 sacdan imal edilmiş olup, kumlama bölgesi mangan aşınma plakaları ile desteklenmiştir. Legging bölgelerine yakın kısımlara Hardox saclar ilave edilmiştir. Aşınma plakası kaplaması, ileriki aşınmaya bağlı değişimlerde kolaylık sağlamak amacıyla vidalı tiptedir. Makine üzerindeki türbinlerin yan aşınma plakası, üst aşınma plakası, ön ve arka aşınma plakası, bıçakları, impelleri, kontrol kafesi ve çelik bilya besleme dirseği Ni-Hard dökme demir kimyasal bileşiminden üretilmiştir. KOD G x Y (mm) TÜRBİN SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1.000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1.000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1.000 16 x Ø 400 SK - 9 3.000 x 1.500 16 x Ø 400 SK - 10 4.000 x 2.000 22 x Ø 400

Leto izdelave: 2025, stanje: novo, A pipe shot blasting machine is a specialized device designed for cleaning, roughening, or preparing the internal and external surfaces of pipes and cylindrical components. It is used for removing rust, mill scale, burrs, old paint coatings, and other contaminants by means of a high-velocity abrasive stream (e.g., steel shot, grit, or sand). ⚙️ Operating Principle Loading: Pipes are placed on a roller or belt conveyor system, which enables smooth movement. Transport: Iasdpfx Abjxuhrboxju The pipes are automatically fed into the blasting chamber via a roller conveyor or a through-feed line. Shot Blasting Process: Inside the chamber, high-speed turbines propel steel shot or other abrasive material onto the surface of the pipe. During the process, the pipe rotates and advances, ensuring uniform cleaning of the entire surface. Abrasive Cleaning and Recovery: The used abrasive is automatically collected, filtered, and recycled for reuse. Dust and contaminants are removed through an industrial extraction and filtration system.

Leto izdelave: 2025, stanje: novo, Rotacijski stroj za peskanje z mizo omogočajo učinkovito in enakomerno čiščenje površin ulitkov, odkovkov in kovinskih komponent. Z uporabo vrtljive mize in visokozmogljivih peskalnih koles odstranijo rjo, oksidne plasti, barvo ter nečistoče za pripravo delov na premaz ali nadaljnjo obdelavo. Idealni so za majhne in srednje serijske proizvodnje, ti stroji zagotavljajo stalno kakovost, zmanjšujejo ročno delo in nudijo zanesljivo delovanje v industrijskem okolju. Iajdpfx Aoxzzi Tsbxju

Leto izdelave: 2025, stanje: novo, The Pass-Through Hanging Shot Blaster is an automatic surface cleaning system primarily used for removing rust, scale, paint, or other contaminants from metal surfaces. In this system, components are suspended on an overhead conveyor and continuously transported through the blasting chamber, ensuring high efficiency and consistent processing quality. ⚙️ Operating Principle Loading: Components are hung on rotating hooks or hangers attached to the overhead conveyor. Transport: The conveyor automatically moves the components into the shot blasting chamber. Blasting Process: Inside the chamber, high-speed turbines propel steel shot or other abrasive media onto the surface of the components. This effectively removes rust, scale, burrs, old paint coatings, and other contaminants. Hook Rotation: The hooks typically rotate to ensure even cleaning of the entire surface of the component. Unloading and Abrasive Recovery: After blasting, the components exit the chamber. The used abrasive is recovered and recycled, while dust is extracted by a filtration system. CODE W: H: Turbine ASK-KON - 1 1,000 x 1,000 4 x F400 ASK-KON - 2 1,000 x 1,500 6 x F400 ASK-KON - 3 1,000 x 2,000 8 x F400 Iedpfxjxuhf Ij Abxoau ASK-KON - 4 1,500 x 3,000 12 x F400 ASK-KON - 5 1,500 x 4,000 12 x F500

Leto izdelave: 2025, stanje: novo, A gas cylinder shot blasting machine is an industrial device designed for cleaning, removing rust, old paint, and contaminants from the surface of gas cylinders (e.g. LPG, technical, industrial) prior to repainting, refurbishment, or technical inspection. ⚙️ How does it work? The machine uses steel shot, which is propelled at high speed onto the cylinder surface inside an enclosed blast chamber. This process: - Removes rust, paint, and contaminants, - Produces a uniform, roughened surface to improve paint adhesion, - Enables thorough surface inspection (cracks, dents, corrosion), - Prepares cylinders for safe reuse. 🧩 Main components Component Function Blast chamber Location where the cleaning takes place Blast wheels Propel steel shot at high velocity onto the surface Transport system Rotates or moves the cylinders (conveyor, turntable, hoist) Iedpfoxun T Sox Abxoau Abrasive recovery system Collects and recycles abrasive material Dust collector (air filter) Removes dust and airborne contaminants Control panel Process automation and control

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, hladilna zmogljivost: 1 kW (1,36 KM), Gre za rabljeni agregat z nazivno hladilno zmogljivostjo približno 600 kW za parametre voda +12/7°C. Vijčasti kompresorji Bitzer. Hladilno sredstvo R513A. Agregat ima vgrajeno črpalko in tovarniško ekspanzijsko posodo. Agregat je v dobrem stanju, iz našega najemnega strojnika parka. Prevoz ni vključen v ceno naprave. Nudimo 3-mesečno garancijo (velja na ozemlju Poljske). Iodpfx Asy Tmixobxjau

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, hladilna zmogljivost: 1 kW (1,36 KM), To je rabljena enota z nazivno hladilno zmogljivostjo približno 720 kW za parametre voda +12/7°C. Vijakasti kompresorji Bitzer. Hladilno sredstvo R513A. Enota ima vgrajeno črpalko in tovarniško ekspanzijsko posodo. Agregat je v dobrem stanju, iz našega najemnega strojeparka. Prevoz ni vključen v ceno naprave. Nudimo 3-mesečno garancijo (velja za ozemlje Poljske). Iaodpoy Tmh Ujfx Abxeu

Stanje: potreben popravila (rabljeno), Leto izdelave: 2015, To je rabljena enota z nazivno hladilno močjo približno 430kW. Hladilno sredstvo R134A. Enota ima vgrajeno črpalko, tovarniško ekspanzijsko posodo in kompresor Bitzer z inverterjem. Enota trenutno prihaja iz našega najemnega parka strojev. Trenutno je uparjalnik (plaščno-cevni toplotni izmenjevalnik) popolnoma netesnjen. Prevoz ni vključen v ceno naprave. Iasdpfxsix Adbo Abxou

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, A hose bag machine (flat bag machine with twist tie) from Honsel & Co., overhauled by PCM in 2003, is available. Roll width: 980 mm, bag length range with twist closure: 280 mm - 710 mm, bag length range as tube without twist: 710 mm - 1020 mm. Includes an auxiliary flexographic printing unit and extensive accessories for format changeover. Documentation is available. On-site inspection possible. Iodpjvtqq Uofx Abxoau

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, hladilna zmogljivost: 1 kW (1,36 KM), This is a used chiller unit with a nominal cooling capacity of approximately 1000 kW for water parameters of +12/7°C. It is equipped with Bitzer screw compressors and uses R513A refrigerant. The unit features a built-in pump and a factory-installed expansion vessel. The chiller is in good condition, coming from our rental machine fleet. Transport is not included in the device price. We provide a 3-month warranty (valid within the territory of Poland). Isdpfx Ajq Rvwnobxjau

Stanje: rabljeno, največja dovoljena obremenitev: 2.590 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, prva registracija: 01/2024, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.060 mm, višina nakladalnega prostora: 30 mm, skupna širina: 2.130 mm, skupna višina: 870 mm, A21. GW26H346846 Iasdpexw Dy Hefx Abxju Innere-/Lademaße: 480 x 206 cm Nutzlast: ca. 2590 kg zul. Gesamtgewicht: bis 3500 kg Leergewicht: etwa 910 kg 3 gebremste Achsen Robustes und voll verzinktes Fahrgestell mit V-Deichsel Auflaufeinrichtung und Feststellbremse Stahlrahmen und Standschienen aus Lochblech im Ganzen geschweißt, komplett Tauchbad feuerverzinkt Transportfläche: Standschienen aus LOHR Blech + Alu-Riffelblech in der Mitte + zusätzliche Verstärkung aus Sperrholz unter der Ladefläche Korrosionsschutz: feuerverzinkte Konstruktion Manuelle Seilwinde Hydraulische Handpumpkippvorrichtung Einseitiger Hydraulikzylinder für Heben und Senken Lochprägung in Standschienen für die Ladungssicherung Seitlich ausklappbare Rücklichter für einfaches Beladen des Anhängers Stützrad...u.v.a.m. Fhz. nicht aufbereitet Irrtümr und Zwischenverkauf vorbahalten

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, 2024 MODEL COILTECH CMKS A1602D1300 12T stroj za odvijanje, ravnanje in podajanje kolutne pločevine. Na voljo za ogled v našem skladišču v Gebzeju. Širina 1300 mm, nosilnost 12 ton. Iedpszdy Ersfx Abxoau

Stanje: novo, lastna masa: 490 kg, največja dovoljena obremenitev: 810 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 3.100 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 1.950 mm, velikost pnevmatike: 185/70r13, Tandem box trailer Roadstar 400 by Cheval Liberté / Debon. An appealing design, aerodynamic front, sandwich panel walls, aluminium floor, and polyester roof are combined in this box body. Ijdpfx Abeqah R Aexoau Hardly any other car trailer offers such outstanding driving characteristics! The aluminium box trailer is equipped with the Pullman2 chassis, a proprietary development by Cheval Liberté. The low loading height of just 35 cm and the independent wheel suspension with trailing arm, coil spring, and shock absorbers built to automotive standards ensure optimal handling. The low loading angle is ideal for loading motorcycles and quads. A particular highlight is the poly box trailer’s loading ramp, which can also be opened as a door to make pallet and general cargo loading effortless. The extensive standard equipment of this car trailer includes a one-piece polyester roof and front, sandwich panel walls, aluminium floor, side hatch, flap-door system, 100 km/h road approval, interior light, automatic jockey wheel, lashing eyes, reinforced chassis, and a V-shaped drawbar. Useful box trailer accessories such as a motorcycle clamp, mounting rail, motorcycle straps, tie-down straps, rear supports, and extra lashing eyes are also available. The superstructure is splash-proof.

Stanje: novo, lastna masa: 980 kg, največja dovoljena obremenitev: 2.520 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 4.350 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.000 mm, velikost pnevmatike: 185r14c, Product Information: "Cheval Liberte Roadstar C800 3500kg 435x200x200cm Box Trailer" NEW C800 box trailer from Cheval Liberte / Debon. Combining large cargo volume, attractive design, aerodynamic front, aluminum sidewalls, aluminum floor, and polyester roof, this box trailer offers top-tier performance and quality construction. Few passenger car trailers offer similarly outstanding handling characteristics! This aluminum box trailer is equipped with the proprietary Pullman2 suspension system developed by Cheval Liberte. Iaodpeiu Tlvofx Abxju A low loading height of just 35cm, independent wheel suspension with longitudinal control arm, coil springs, and automotive-standard shock absorbers ensure optimal driving dynamics. The shallow loading ramp angle is ideal for motorcycle and quad bike loading. Another highlight is the unique rear ramp/door combination, which can be opened as a door for easy loading of pallets and other goods. Extensive standard features on this car trailer include a one-piece poly front and poly roof, aluminum sidewalls, aluminum floor, side door, ramp-door system, certified for speeds up to 100 km/h, interior light, automatic jockey wheel, lashing eyes, maneuvering handle, reinforced frame, and a V-drawbar. Dimensions: Usable width approx. 178cm, usable height approx. 181cm, width between wheel arches (narrowest point) approx. 190cm. We also offer a range of cost-effective accessories, such as motorcycle cradles, wheel chocks, motorcycle straps, lashing rails, tie-down straps, rear supports, and additional lashing eyes. The body is splash-water protected.

Stanje: novo, lastna masa: 300 kg, največja dovoljena obremenitev: 450 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.250 mm, širina tovornega prostora: 1.170 mm, višina nakladalnega prostora: 1.200 mm, Ploščata zaboja Roadstar C220 proizvajalca Cheval Liberté / Debon. Oprema zaboja vključuje stene iz vezanega lesa, enokrilna vrata, podporne noge, podporno kolo, pritrdilne obroče, stabilen okvir in V-desenico. Nudimo tudi uporabno dodatno opremo za prikolice, kot so pritrdilne letve, napenjalni pasovi ter dodatni pritrdilni obroči. Nadgradnja je zaščitena pred škropljenjem vode. Tehnični podatki: Notranje mere D x Š x V: pribl. 225x117x120cm Skupne zunanje mere D x Š x V: pribl. 348x163x173cm Skupna masa: 750kg brez zavore Lastna masa: pribl. 300kg Nosilnost: pribl. 450kg Iasdpfx Abjy Efqfjxou Višina nakladalne površine: pribl. 50cm Izvedba za 100km/h: na voljo za doplačilo Pnevmatike: 155/70R13

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), The Coiltech Decoiler Straightener Feeder System is a compact coil feeding system for presses. Strip width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler capacity: 6000kg, inner diameter (min-max): 470-520mm. Connected load: 7.5kW, supplied with documentation. Iaodpfx Aei El Ucjbxju

Stanje: novo, lastna masa: 950 kg, največja dovoljena obremenitev: 2.550 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.750 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 195/50r13c, Three-way tipper, heavy-duty, by trailer manufacturer HAPERT, model COBALT HM-2-FERRO, 3500 kg, 375x180x30. In our opinion, the Cobalt tipper series from Hapert is extremely robust, excellently equipped, and offered at a fair price. This car trailer in high-loader design is built for durability. Premium quality features and a highly comfortable chassis (parabolic suspension) come as standard on this tipper trailer. Below is an overview of the extensive standard equipment of the three-way tipper trailer: - Extremely robust steel frame, hot-dip galvanized - Parabolic suspension with shock absorbers - Loading ramps - Rear support leg kit - Approved for 100 km/h - Electro-hydraulics with battery - Battery box with cover - Removable, illuminated control unit - Double-walled anodized aluminium side panels, all panels foldable and removable - Easy-to-operate eccentric locks - Low chassis with 195/50R13C tyres - Lashing eyes with 1000 kg load capacity - Net hooks - Solid steel floor - Automatic jockey wheel - Reinforced V-drawbar Technical details follow below. For Hapert three-way tippers, we offer useful and affordable accessories such as side wall extensions, mesh extensions, tarpaulin with frame, flat tarpaulin, battery charger, emergency hand pump, toolbox, lashing straps, and trailer lock. ----- Iedpfx Ajftwqwobxjau All of our attractively priced offers can also be found on our homepage. Delivery throughout Germany (except islands) possible! Please feel free to ask us for delivery prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – hrs Collection not possible on Saturdays!

Stanje: novo, lastna masa: 1.060 kg, največja dovoljena obremenitev: 2.440 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 185/70r13c, Three-way tipper from trailer manufacturer HAPERT, model COBALT HM2+ 3500kg 335x180x40. In our opinion, the cobalt tippers from Hapert are extremely robust, very well equipped, and also offer a fair price. This car trailer, designed as a flatbed high loader, is built for longevity. Premium-quality equipment comes as standard with this three-way tipper. Overview of the comprehensive standard equipment on this tipping trailer: - Extremely sturdy steel frame, hot-dip galvanized by immersion - Parabolic suspension with shock absorbers - Loading ramps stowable beneath the platform - Crank-type rear support legs - Electrohydraulics with battery and emergency hand pump - Removable, illuminated control unit Iedpfsf Nt Diox Abxsau - Double-walled, 40cm high, anodized aluminium drop sides in anthracite - All sides are hinged and removable - H-frame headboard - Easy-to-use eccentric latches - Low chassis with off-road tread tyres - LED lighting with protective covers - Lashing rings rated to 1000kg - Mesh hooks - Solid steel floor - Highly robust automatic jockey wheel - Battery charger - Reinforced V-drawbar We offer useful accessories for Hapert three-way tippers: Affordable mesh sides, sidewall extensions, tarpaulin with frame, toolbox, lashing straps, and locks available here. ----- All of our competitively-priced offers can also be found on our website. Delivery available across Germany (except islands)! Feel free to ask for a quote. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37, 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – hours No collection possible on Saturdays!

Stanje: novo, lastna masa: 250 kg, največja dovoljena obremenitev: 500 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.060 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.300 mm, Kart trailer from the trailer manufacturer VEZEKO, model KART-2. This lid trailer allows for easy loading of two karts. One kart is positioned on the floor, the other is mounted on the wall bracket. The standard features of the Kart lid trailer include a wall bracket for the second kart, lockable lid, double-wing rear doors, jockey wheel, robust galvanized frame, and a sturdy tubular drawbar. We also offer kart trailers as box trailers. Trailer accessories such as lashing straps, storage boxes, wheel restraints, and locks are also available. Ijdpfsui Nu Hjx Abxeau

Stanje: rabljeno, Leto izdelave: 1999, Format: 340 mm Oprema: VIVA 340 št. 85, opremljena z: 1 odvijalnikom papirja (premer 1 m) 1 rotacijskim izsekovalnim modulom z magnetnim valjem, dolžina formata 14 palcev 6 visokotiskarskih enot z integriranim register vozičkom in magnetnim valjem (dolžina formata 14 palcev) 1 sistemom za odstranjevanje mreže (premer 600 mm) 1 navijalnim sistemom (premer 700 mm) 1 enoto za vzdolžno rezanje in obrezovanje Ijdpfozcp D Nsx Abxjau 1 UV-fleksolakirnim modulom z magnetnim valjem za plošče 7 I.S.T. UV sušilniki s CMK reflektorji in predpripravo za vodno hlajenje 1 Rotometrics-Hydrajack sistem za regulacijo tlaka za glavno izsekovalno enoto 1 BST ProMark video sistemom za pregled traku (model Euroscope) 1 predpriprava za Corona obdelavo 1 izsekovalna enota za plošče 1 naprava za upogibanje plošč