Avtomatski Stroj Za Žaganje Aluminija Pressta Eisele Profilma 500 E nakup rabljenega (123.596)

Leto izdelave: 2011, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Rezno območje do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazom Hnjdpfsxl Dz Tsx Agiok Hitrost vrtenja žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom pri doseženi nastavljeni vrednosti Brezstopenjsko nastavljivo pnevmatsko podajanje materiala Hidropnevmatski podajanje žage Pnevmatski vpenjalci materiala Sistem za pršenje Samo 4400 obratovalnih ur Vključno z navodili za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxGxV)

Leto izdelave: 2006, stanje: rabljeno, Maks. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazom Hitrost vrtenja žaginega lista: 2 obrata na minuto Števec kosov z avtomatskim izklopom ob doseženem cilju Hsdpfsvcmirox Agienk Neomejeno nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalne naprave za material Razpršilna naprava Samo 2200 obratovalnih ur Vključno z navodili za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxGxV)

Leto izdelave: 2004, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazovalnikom Hitrost žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom ob doseženi nastavljeni vrednosti Hedpjxn Iq Dofx Agijnk Brezstopenjsko nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalke materiala Naprava za pršenje Vključuje navodila za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxDxV) 1000 kg

Leto izdelave: 2009, stanje: rabljeno, Aluminium saw system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, discharge table, chip conveyor, and extraction system included Soundproof enclosure Hedpfxjqzmnue Agienk Controlled via Siemens S7 panel Operating manual and other documentation available; further technical data upon request The machine was operational until disassembly For further technical data, please inquire or refer to the photos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: Horizontal loading magazine, model HLM 4-strand timing belt conveyor 6 compartments, each 285mm wide, for profile storage; max. material height as per saw cutting range, round material max. diameter 130 mm 3 sliding rails between the belts as additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously adjustable speed Hydropneumatic saw blade feed, continuously adjustable from rear to front Control: Siemens S7-300 with touchscreen Reversing device with 5-fold stroke up to max. 5,000 mm Electric material feed 3 – 1,000 mm (single stroke) Cutting slot extension on both sides Pneumatic unloading pusher Waste flap after the saw for offcuts / remnants Cut-off length: profile-dependent, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for chip extraction Unloading: Table area: 1,500 mm x 2,500 mm Hnsdpfx Agjxvbvvjisk Pneumatic cross pusher

Stanje: rabljeno, Leto izdelave: 2009, Hidravlično delovanje Višina profila do 210 mm pod pritiskalcem Največja višina izsekovanja z dvojnimi nastavljivimi izsekovalnimi glavami: 145 mm Višina prislona: 150 mm Teža: pribl. 450 kg Hnedpfx Ajyu Rw Ijgisk

Leto izdelave: 1978, stanje: rabljeno, številka stroja/vozila: 1078136, Behringer vollautomatische Bandsäge in gutem funktionsfähigem Zustand. Hnedpfobta Dmex Agisk Rundmaterial-Kapazität: 320 mm

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic Kasto band saw system is available. Cutting range at 90°: Round material: 530mm, Square material: 530mm x 530mm, Flat material: 530mm x 640mm. Saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (X/Y): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation is available. On-site inspection is possible. Hodov S E Edopfx Agijnk

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024,

Stanje: potreben popravila (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 PLC control: Siemens S7 Saw blade: 60 – 250 mm Motor power: 1.5 kW Saw blade feed: 0–20 mm/min Cutting speed: 15–170 m/min (steel) 630–1885 m/min (non-ferrous metal) Max. working area: 70x40 mm (steel) Max. working area: 60x40 mm (non-ferrous metal) Round working area: 5–70 mm (steel) Round working area: 5–50 mm (non-ferrous metal) Feed length: 5–500 mm 5–9999 mm (multiple stroke) Max. feed speed: 500 mm/sec Weight (saw): approx. 610 kg Dimensions LxWxH (saw): approx. 2500mm x 1000mm x 2000mm Hsdpfxjuiy I Aj Agisnk The machine is completely overhauled in-house according to customer specifications. Among other things, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of pneumatic feed and/or ball screw - Replacement of servo motor and servo drive - Replacement of frequency inverter for the main saw drive - New electronic components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Optimization of extraction system - Maintenance of central and minimum lubrication systems - Replacement of general wear parts - Overhaul of machine body Additional features: - Minimum quantity lubrication for optimal sawing quality Due to its design and equipment, the machine is particularly suitable for mass cutting of steel with high precision tolerances. Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts on our systems. Labor time and consumable/wear parts are excluded from the warranty. Optional: - Conversion of the saw unit to a gearless main drive for cutting non-ferrous metals and plastics (speed 1,000–3,000 rpm) - 1,000 mm feed unit - 2,000 mm feed unit - 4 m angled magazine - 6 m angled magazine - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prism jaws (60°) for clamping round stock in bulk - Discharge system - Delivery and installation at your facility - Operator training

Stanje: dober (rabljeno), Leto izdelave: 1984, številka stroja/vozila: 102335, Offer 23172 Technical Specifications: - Saw blade diameter up to: 400 mm - Cutting range with saw blade diameter: 400 mm - At 90°, round: 130 mm - Square: 120 mm - Flat, up to: 260 x 60 mm - Mitre adjustment left and right: 0 – 90° Hnodjrmkl Aspfx Agiok - Cutting speed: 1750 / 3500 m/min - Saw blade feed speed: 0 – 3 m/min - Rapid return: 3000 mm/min - Saw drive: 400 V / 3.7 / 4.4 kW - Pneumatic material clamping vice with adjustable clamping pressure - Required space approx.: W 1200 x H 1900 x D 1200 mm - Weight approx.: 600 kg - Discharge roller conveyor: 3000 mm - Infeed roller conveyor: 3000 mm

Stanje: dober (rabljeno), Fully automatic with mitre cutting, Max. diameter or cutting width 180 mm, Minimum dimension to be cut D 10 mm, Automatic feed single 600 mm, Max. feed length multiple 1800 mm, Minimum remnant length for single cut 20 mm, Minimum remnant length in automatic mode 110 mm, Table rotation range for mitre cut 135 degrees, Total drive power 3.2 kW, Weight without roller conveyors 1100 kg, Coolant system, The saw is still connected to power, Operating video available, Hnedpfxotqdvgo Agijk Operating manual with circuit diagrams and spare parts lists.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, commande entièrement automatique entraînement 7,5 kW, S6, 400 V, 50 Hz, 2850 tr/min pour l’utilisation de lames de scie D 550 mm plage de coupe 270x140 mm (largeur x hauteur), D 185 mm largeur de profil max. 270 mm commande avec écran avec compteur de pièces avec dispositif de réversibilité pour une longueur de coupe max. 3000 mm arrêt automatique via interrupteur de fin de course en fin de matériau avancement de lame de scie hydropneumatique, réglable en continu, de bas en haut système de serrage vertical et horizontal, côté alimentation et évacuation de la tête de scie dispositif pneumatique de pulvérisation doseuse élargissement de l’écartement de coupe des deux côtés de la lame Hsdpfx Agjyvtyveienk dispositif d’alimentation électronique 3–600 mm de longueur d’avance, avec vis à billes et servomoteur, avec dispositif de serrage pneumatique horizontal et vertical, longueur de chute à partir de 75 mm, selon le profil 2 embouts d’aspiration D 100 mm capot de sécurité sur la tête de scie et l’unité d’avance Une installation d’aspiration adaptée peut être proposée en option !

Stanje: novo, Semi-Automatic Bandsaw MACC 320 MS Brand New “CE” Certified Technical specifications sheet attached. Available for immediate delivery, subject to prior sale. Key features of the machine (blade support rigidity, flywheel sizing, blade guides, and blade tensioning system) have been thoroughly engineered to prevent blade fatigue, extend service life, and improve cut accuracy and cutting time. Vertical rotation on pivot with adjustable tapered roller bearings without backlash. Blade drive via two-speed motor and special gearbox with bronze gear and hardened, ground worm screw. Properly dimensioned flywheels. Robust blade guides made with sealed bearings and adjustable carbide (Widia) pads. Blade tension achieved via electromechanical device with micro-switch controlled blade rotation. Safety devices on flywheel covers, on the control knob, and on the blade to prevent accidents. Hodpfofibfasx Agisnk Cutting thickness: 1.2 mm Cutting range: 0° to 60° to the right Adjustable stop for repetitive cuts. Coolant electric pump 0.06 kW for blade cooling. Operation: Cutting cycle started by pressing the start button, the machine: 1. Closes the vise and starts the blade drive motor 2. Lowers the saw arm for cutting 3. Saw arm returns to the starting position 4. Stops the blade drive motor 5. Opens the vise Manual cutting mode also available. OPTIONAL ACCESSORIES: Single-phase motor 69 m/min Speed variator from 20 to 90 m/min

Stanje: dober (rabljeno), Leto izdelave: 1998, Semi-automatic circular saw machine Manufacturer: KASTO Type: V350 U Year: 1998 with miter cutting, roller conveyor and stop Saw blade diameter: 350 mm Pneumatic vice and saw feed Infinitely variable. Hodpfsfym Ewsx Agienk Machine with low usage, in good condition.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: nepreverjeno, številka stroja/vozila: 230102, Dear Sir or Madam, Hodorvz H Iopfx Agisnk We are selling, on behalf of our client, the ELCOMA winding machine model ES-500X described and pictured here. The detailed specifications for this winding machine can be provided to you via email upon request. We are also available via WhatsApp. Please note that this is an informational listing only. The purchase contract can only be concluded at the specified location of the item.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, univerzálně použitelný díky dvakrát nastavitelnému děrovacímu tělesu pro rohové úhelníky s drážkou o rozměru 25–60 mm a s posunem komory profilu 0–40 mm plynule výškově nastavitelné snímače, děrovací nůž a dorazová vložka snímače a děrovací tělesa jsou opatřeny měřítky zasouvatelný doraz pro snadné vkládání profilů, automaticky se nastavuje při najetí na profil hydraulická aretace dorazu pneumatický děrovací proces přes pákový systém zajišťuje synchronní děrování max. výška dorazu 120 mm výška profilu do 190 mm při stlačení výška děrování do 150 mm šířka profilu do 75 mm, navíc přesahy do 60 mm nejmenší vnitřní rozměr rámu 175 mm 2 pneumatické upínací válce pro upnutí profilů 2 excentrické kotouče pro polohování rámů 2 výkyvná ramena pro odkládání profilů ovládání pomocí 2 nožních ventilů Hnedpfx Asyqxbgsgijk

Stanje: novo, Za obdelavo vseh standardnih aluminijastih okenskih profilnih sistemov kot so Schüco, Hueck, Heroal, Reynolds itd. Univerzalna uporaba zaradi dvakrat nastavljivih prebijalnih teles Za vogalne spojke z dimenzijo utora od 25–60 mm in premikom profilne komore 0–40 mm Neomejeno po višini nastavljivi tipala, prebijalna rezila in vstavki prislonov Hodpfx Agehmfyhjienk Tipala in prebijalna telesa so opremljena z lestvicami Vgradni prislon za enostavno vstavljanje profilov, samodejno nastavljiv ob pomiku proti profilu Hidravlična blokada prislona Pnevmatski stiskalni postopek prek vzvodnega sistema zagotavlja sinhron prebijalni postopek 2 pnevmatska vpenjalna cilindra za pritrditev profilov 2 ekscentrična diska za pozicioniranje okvirjev 2 zložljivi podporni roki za profile Upravljanje preko 2 nožnih ventilov Vključno s standardnimi orodji

Stanje: dober (rabljeno), Leto izdelave: 1993, Mitre saw, saw unit right/left, double mitre saw, cross-cut and mitre saw, double end profiler - Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 - Cutting length: 250 to 5000 mm - Saw units: swivelable by 45° Hnjdpfx Agstxkprsijk - Saw blade: Ø 500 mm - Cutting data 90°: cutting height 350 mm, cutting width 160 mm - Cutting data 45°: cutting height 260 mm, cutting width 125 mm - Dimensions: 5750/1220/H1700 mm - Weight: 1200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Metal circular saw from 2013. This PRESSTA EISELE Profilma 400 V is equipped with a saw blade diameter of Ø400 mm and a powerful motor with approx. 12 kW. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, consider the PRESSTA EISELE Profilma 400 V machine, which we have for sale. Contact us for further details on this machine. • Design: Integrated material feed/loader magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Motor power: approx. 12 kW • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Cross cut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before saw blade retraction (no secondary trimming) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; exchangeable plastic/PVC pads • Control: PLC-based; operation via control console with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control Hedpfx Ajyyxxfogienk • Extraction ports: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction Additional equipment • External chip extraction unit (for connection to Ø100/Ø160 mm ports)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1587 / 1588, premer žaginega lista: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control. Punching unit: Features a hydraulic punching unit on the discharge side with a punching force of 250 kN. The punching direction is vertical from above, and up to 8 profile punching tool cassettes can be used simultaneously. Material feed: The feed is managed via a ball screw and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control: Modern variants often utilize a Siemens S7 control system with a touch display for intuitive operation and precise programming. Hnodpfxsyyz Txs Agiek The machine is built for continuous industrial use and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. On request, we also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about. 📞 Please feel free to contact us for further information or a non-binding quotation. We provide you with personal and expert advice. Interim sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials. Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing Range & Feed: 500–550 mm saw blades Hnsdpfx Asyyz Ebjgiok Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Infinitely variable speed regulation Saw cut from below, motorized feed Material feed: 3–800 mm, reversible up to 4,000 mm Ballscrew with servo drive and round-shaft guide Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: Vertical hydraulic punching unit (outfeed side) with automatic oil cooling Punching force: 300 kN Stroke: 20 mm Double-stroke cycle time: 2–3 seconds Punch scrap ejection into frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, reduced pressure) 3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control Minimum quantity lubrication system with 2x 3-liter tank and fill level display Noise reduction package: hood and internal saw blade guard insulated Roller conveyor (740 mm) with operator protection on infeed side Sturdy stationary machine frame, working height: 960 mm Manually operated safety hood Saw blade housing located below table surface Max. Cutting Range: Profile height: up to 65 mm Profile width: up to 170 mm Technical Data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm 2 machines available ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution. On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed. Sawing range & feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Continuously variable speed control Up-cut sawing, motorized feed Material feed: 3–800 mm, reversing up to 4,000 mm Ball screw spindle with servo drive and round shaft guide Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching unit: Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler Punching force: 2 × 150 kN Stroke: ≤ 20 mm Hjdpfoyyzxhox Agionk Vertical stroke infinitely adjustable (also suitable for embossing) Horizontal punching cylinder can be switched off separately Double-stroke cycle time: 2x 2–3 seconds Punch waste is discharged laterally from the machine frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure-reduced) 3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control Minimum quantity spray unit with 2x 3-litre tanks and level indicators Noise protection package: hood and saw blade guard with internal insulation Roller conveyor (740 mm) with reach-in protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening safety hood Saw blade housing below the tabletop Max. cutting range: Profile height: up to 65 mm Profile width: up to 135 mm Technical data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm A total of 2 units available. ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and competent advice. Subject to prior sale, changes and errors excepted!

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Strojna žaga za izreza in poševne izreza. Stroj ima dve žagini listi s premerom 500 mm. Opremljena je s pnevmatsko vpenjalno napravo. Podajanje je hidropnevmatsko in se sproži z dvoročnim upravljanjem. Omejevalnik materiala je vrtljiv z zaskočnimi točkami ter digitalnim prikazom. Višina izreza ter kot sta motorizirano nastavljiva in imata digitalni prikaz. Maks. višina profila: 280 mm Maks. širina izreza: 300 mm Maks. višina izreza: 185 mm Maks. globina izreza: 185 mm Hjdoyzcpdjpfx Agienk

Leto izdelave: 2009, stanje: rabljeno, Premer žaginega lista navpično: 600 mm Premer žaginega lista vodoravno: 500 mm Hnsdpfx Asywtqdogiek Širina izreza: pri 90° obdelavi profilov do 300 mm, konične poševnine do 30° Največja višina profila: 280 mm Globina izreza: pri 90° vodoravno do 185 mm / pri 90° navpično do 230 mm Omejilnik materiala: vrtljiv 30° - 90° - 45° Vrtljiv omejilnik materiala z zaskoki in prikazom na zaslonu Programska krmiljenja za samodejno nastavitev višine reza, kotov in višine izreza Shranjevanje do 6 programov Hidropnevmatsko podajanje materiala preko dvoročnega upravljanja Pnevmatske vpenjalke za material Mazanje s hladilno tekočino