Plantec Uk 600 Ha nakup rabljenega (25.995)

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! Gjdjpa Nxdjpfx Abrokc The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-600-A is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials possible to a limited extent). The machine stands out for its easy operation, quick and convenient material changeover, as well as simple mitre angle adjustment. The UK-600 A offers a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed operates automatically at the push of a button, and the material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders. As standard, the machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connection points for a chip extraction system are provided as well. Additionally, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety cover! Equipment • Precision under-table circular saw • Stepless mitre adjustment 0º/45º/90º/-45º/-60º • Includes 2 pneumatic clamps (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Minimum quantity coolant system for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600mm Our NC pusher system ensures that your workpieces are positioned at the desired machining point on our UK 600 HA 90°. A gripper clamp holds the material, with the NC controller positioning it automatically. Next, the clamping and sawing process is triggered. The positions are pre-programmed in the control system. After the machine completes the machining process, it automatically moves to the next sawing position. Depending on the workpieces, multiple parts can also be clamped either on top of or next to each other and positioned simultaneously. You are welcome to visit the desired system at any time in our manufacturing/showroom. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH Gksdpfx Aegwt S Eebrsc

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! Gkedpfx Asgcbwgobrsc You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm Gkjdpfxogwt Ryo Abrsc • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm Gjdpfxogwt Rrj Abrjkc • Saw blade not included in the scope of delivery! You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop Gkodsgwt Rvopfx Abrjc • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) Gksdogwt R Dspfx Abrsc • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders Gedsidun Djpfx Abrskc - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir Godpfx Aboidun Ijrokc - Air gun for cleaning the machine - Saw blade diameter: 800 mm Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH Gedpfsgwt Rnjx Abrskc

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.660 kg, nosilnost: 600 kg, doseg roke: 2.826 mm, proizvajalec krmilnikov: Kuka, Oprema: dokumentacija / priročnik, Industrijski robot KUKA KR 600 R2830 / FLR, izdelan novembra 2021. Robot ni bil nikoli uporabljen in ima 0 ur delovanja. Gsdpez D Tkrefx Abrekc Glavne specifikacije: * Nosilnost: 600 kg * Največji doseg: 2.826 mm * Teža robota: 2.660 kg * Serijska številka: 1414192 * Leto izdelave: 2021 * Stanje: Nov / nerabljen, 0 ur delovanja Robot ni bil nikoli uporabljen v proizvodnji in je v odličnem stanju.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2X394C04103, Leto izdelave: 2012, obratovalne ure: 19.070 h, nosilnost: 5.000 kg, dvižna višina: 4.100 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.070 mm, Brez minimalne cene – zagotovljen prodaj po najvišji ponudbi! TEHNIČNE PODROBNOSTI Višina dviga: 4.100 mm Celotna višina: 3.070 mm Nosilnost: 5.000 kg PODROBNOSTI O STROJU Godez I I Ruopfx Abrekc Tip jambora: Simplex Vrsta goriva: dizel Lastna teža: 7.600 kg Delovne ure: 19.070 ur Zunanja referenčna številka: SL15892SP

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A1607, proizvodna zmogljivost: 500 enota/h, TEHNIČNE PODROBNOSTI Gedoz Hwfrspfx Abrjkc Dimenzije palet: Euro paleta: 800 × 1.200 mm CP1 paleta: 1.000 × 1.200 mm Masa vreče: maks. 50 kg Proizvodnja: do 500 vreč/uro OPREMA Naprava za odvijanje folije Stroj za ovijanje

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 8.483 h, nosilnost: 4.000 kg, dvižna višina: 3.100 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 2.404 mm, Brez minimalne cene – zagotovljen prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Nosilnost: 4.000 kg Višina dviga: 3.100 mm Višina vozila: 2.404 mm PODROBNOSTI O STROJU Tip nosilca: standardni Vrsta vozila: električni viličar s štirimi kolesi Razred ISO: razred ISO 3 = 2.500–4.999 kg Stanje baterije: 60–80 % Napetost baterije: 80 V Prazna teža: 4.700 kg Delovne ure: 8.483 ur OPREMA Stranski premik Naprava za nastavitev vilic 3. ventil 4. ventil Gsdpfx Aboz I Rzcorokc Ogrevanje Popolna kabina Zunanja referenca: SL12869SP

Leto izdelave: 1991, stanje: zelo dobro (rabljeno), Popolnoma avtomatizirana pregradna naprava HDN 600 z avtomatskim vlačilcem ZE, vključno z mehanizacijo. Tehnični podatki: Višina prehoda: 700 mm Gedpfoz Ehfajx Abrskc Širina prehoda: 735 mm Gib: 600 mm Napredovanje: največ 15 m/min Vodni sistem hlajenja vodil Pogonski sistem – reduktor Naprava je po dokazih delovala samo 10 let.

Stanje: rabljeno, Leto izdelave: 2011, Naprodaj je navpično obdelovalno središče: Proizvajalec: AGIE MIKRON / GF AgieCharmilles Tip: HPM 600 HD Letnik: 2011 Krmilnik: HEIDENHAIN iTNC 530 Tehnični podatki / oprema: Hodi X/Y/Z: 600 / 600 / 500 mm Godszk Erkopfx Abrskc Število vrtljajev vretena: do 20.000 vrt/min Vpenjalni sistem orodja: HSK-A 63 Menjalnik orodja: 60 mest maks. premer orodja: 80 mm maks. dolžina orodja: 300 mm maks. teža orodja: 6,5 kg maks. teža obdelovanca: 500 kg pomik X/Y/Z: 40 / 40 / 30 m/min miza, nastavljiva po kotu transportni sistem za odrezke sistem za hlajenje Dimenzije: pribl. 3.500 x 2.350 x 3.050 mm Teža: pribl. 9.500 kg Po navedbah uporabnika je stroj v zelo dobrem, rabljenem stanju. Ogled je možen po predhodnem dogovoru. ____ Pridržana pravica do vmesne prodaje in napak pri tehničnih podatkih. Tehnični podatki so bili zbrani po najboljših močeh, vendar ne predstavljajo zagotovljenih lastnosti. Veljajo naši splošni pogoji poslovanja, poleg tega prodajalec ne odgovarja za tipkarske ali napake pri prenosu podatkov. Videz ponujenih izdelkov ustreza starosti in prikazanim slikam. Tehnika in obraba ponujenih izdelkov ustrezata starosti. Rabljenih strojev se prodaja izključno podjetjem in brez garancije.

Leto izdelave: 2023, obratovalne ure: 1 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: N.A., Unused CIC 600 peeler centrifuge made from Hastelloy C22 DIN 2.4602. The centrifuge was delivered and installed in 2023, but this unit, along with much of the other equipment, has never been commissioned. The centrifuge features a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed of 1,940 rpm, maximum centrifugal acceleration of 1,260 (g), housing material 1.4571, product-contact parts made of 2.4602—identical to Heinkel centrifuges. Scope of supply: a) CIC 600 peeler centrifuge Gsdpfx Absyffr Uorskc b) Support frame c) CIP system integrated into the main system d) Quick-release front cover, including tool set e) Pressure monitoring inertization integrated into the main system f) Solids discharge valve g) Flooding function h) Washing tray including coating Technical details are available upon request. Please contact us for a written quotation as well. Dismantling, packing, and loading onto a truck will be organised and supervised by Cycron GmbH. This ensures the work is carried out to the highest professional standards. Should you have any further questions or wish to get in touch, please feel free to contact us at any time. We look forward to hearing from you. Cycron GmbH, Switzerland

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 352 P, manual Gedpfxoidunvs Abrokc The semi-automatic circular saw UK 352 P is an "upcut" machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P features a continuously adjustable mitre range—up to 45° to the left and up to 0° to the right. The saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical clamping cylinders. The standard scope of delivery includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system. Features: - Manual guidance of the saw blade - Double mitre 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly structured control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be moved back to increase cutting capacity - Large protective cover, fully shields the working area - Minimum quantity lubrication system - Air blow gun for cleaning the machine - Saw blade Ø 350 mm Work Process: 1) Set the cutting angle 2) Insert the material 3) Position the clamping cylinders up to 20 mm from the material 4) Pneumatically clamp the material 5) Press the start button to activate the saw blade 6) The cutting operation must be carried out manually using the hand lever 7) After completing the cut, switch off the machine! You are welcome to inspect the desired machine in our production/demo hall at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 352 M, manual Gsdpfx Abeidunnerjkc The manual circular saw UK 352 M is an "upcut" machine, primarily used for single cuts on aluminum and copper profiles as well as hard plastics (solid materials only to a certain extent). The machine stands out thanks to its easy operation, quick and convenient material changeovers, and simple miter angle adjustment. The UK 352 M offers a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is manual via a hand lever, and material clamping is also done manually. Equipment - Double miter 45° – 90° – 0° - Large support table - Powerful drive motor - Clearly arranged control panel - One manual clamping cylinder - Fixed material stop jaw can be shifted backwards to increase cutting capacity - Large protective hood covering the entire working area - Saw blade diameter: 350 mm Working process 1) Set the cutting angle 2) Insert the material 3) Manually clamp the material 4) Press the start button to power up the saw blade 5) Perform the cut manually using the hand lever 6) After finishing the cut, switch off the machine! You are always welcome to view the desired machine in our production or demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.800 kg, skupna dolžina: 2.750 mm, skupna širina: 1.500 mm, skupna višina: 1.800 mm, vhodna napetost: 400 V, premer rotorja: 730 mm, širina rotorja: 600 mm, Drobilnik s nihajnimi kladivi za nadaljnjo drobljenje kabelskega odpada, aluminija, elektronskega odpada in neželeznih kovin. Tehnični podatki: – Rotor: premer kroga kladiv približno 730 mm, širina 600 mm, premer rotorjevih diskov Ø 520 mm – Kladiva: ploščata kladiva 215 × 100 × 13 mm, luknja 35 mm – Sito: zamenljivo luknjasto sito, nameščeno eno sito Gkjdez I I Hvepfx Abroc – Pogon: jermenski pogon, motor ABB, velikost 225 (približno 37–45 kW), 400 V / 50 Hz – Električna napeljava popolnoma obnovljena, nov nadzorni omarici v kompletu – Zgornji del ohišja je odpirajoč – Dimenzije približno 2 750 × 1 500 × 1 800 mm, vključno z motorjem in lijakom, teža približno 2 800 kg Obseg dobave: drobilnik z motorjem, zaščito jermena in nadzornim omaricami; nov komplet obrabljenih delov (kladiva, vijaki, distančniki, nerabljeni); izpustni transportni trak z menjalnikom. Tablica z oznako ni prisotna, proizvajalec neznan. Stroj pri nas deluje brezhibno. Ogled in preizkus po dogovoru na lokaciji (Cheb, Češka). Nalaganje na tovornjak na kraju samem. Prodaja brez garancije, cena neto plus DDV.

Stanje: dober (rabljeno), Leto izdelave: 2008, Colchester Harrison Alpha 1400U CNC Lathe Footprint: 1.7 x 3.1 m Height: approx. 1,500 mm Weight: 3,200 kg Equipment: Electrically interlocked chuck guard, full enclosure, 100-litre coolant tank and pump, fully extendable chip tray, machine lighting Turning length: 1,250 mm Swing diameter: 400 mm Centre distance: 1,250 mm Spindle bore: 54 mm Gkjdpfx Abjrnkdyjrsc Turret, number of tool positions: 8 Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No guarantee is given for the correctness, completeness, or currentness of the information.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Robot ABB Robotics IRB 7600 – samo mehanski del (različni modeli in izvedbe – glejte spodaj) 1 x Robot ABB Robotics IRB 7600-325/3.1 M2004, št. robota 76-63643 – samo mehanski del (EAN 4262549323934) • Največja obremenitev robota: 325 kg • Število osi: 6 • Največji doseg: 3100 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 1 x Robot ABB Robotics IRB 7600-500/2.55 M2004, št. robota 76-63756 – samo mehanski del (EAN 4262549323941) • Največja obremenitev robota: 500 kg • Število osi: 6 • Največji doseg: 2550 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 1 x Robot ABB Robotics IRB 7600-325/3.1 M2004, št. robota 76-63695 (20960 delovnih ur) – samo mehanski del (EAN 4262549323958) • Največja obremenitev robota: 325 kg • Število osi: 6 • Največji doseg: 3100 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 1 x Robot ABB Robotics IRB 7600-325/3.1 M2004, št. robota 76-63839 (16184 delovnih ur) – samo mehanski del IRB 7600 (EAN 4262549323965) • Največja obremenitev robota: 325 kg • Število osi: 6 • Največji doseg: 3100 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 Rabljen izdelek – vidne so normalne sledi uporabe. Dodatne informacije, številke izdelkov in slike so na voljo po povpraševanju. Dvodnevna garancija za namestitev. Brez nadaljnje garancije. Poleg tega so nadomestni deli stalno na voljo na zalogi. Navedeni znesek je neto in se nanaša na en izdelek. Zakonsko predpisani davek na dodano vrednost (DDV) v višini 19 % bo dodan pri zaključku naročila. Dobili boste ustrezno račun z navedenim DDV. Osebni prevzem v 74722 Buchen/Hainstadt. Gedpfx Abjz Rndbsrskc Stroški pošiljanja ali stroški špediterja se razlikujejo glede na količino, težo in želene pogoje dostave. Stroški pošiljanja v tujino so na voljo po povpraševanju – prosimo, navedite državo, kraj in poštno številko. Stroški špediterja so na voljo po povpraševanju – prosimo, navedite naslov za dostavo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Robot ABB Robotics IRB 7600 – samo mehanski del (različni modeli in izvedbe – glejte spodaj) 1 x Robot ABB Robotics IRB 7600-325/3.1 M2004, št. robota 76-63643 – samo mehanski del (EAN 4262549323934) • Največja obremenitev robota: 325 kg • Število osi: 6 • Največji doseg: 3100 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 1 x Robot ABB Robotics IRB 7600-500/2.55 M2004, št. robota 76-63756 – samo mehanski del (EAN 4262549323941) • Največja obremenitev robota: 500 kg • Število osi: 6 • Največji doseg: 2550 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 1 x Robot ABB Robotics IRB 7600-325/3.1 M2004, št. robota 76-63695 (20.960 delovnih ur) – samo mehanski del (EAN 4262549323958) • Največja obremenitev robota: 325 kg • Število osi: 6 • Največji doseg: 3100 mm • Ponovljivost: 0,3 mm • Krmilnik: IRC5 M2004 1 x Robot ABB Robotics IRB 7600-325/3.1 M2004, št. robota 76-63839 (16.184 delovnih ur) – samo mehanski del IRB 7600 (EAN 4262549323965) • Največja obremenitev robota: 325 kg • Število osi: 6 • Največji doseg: 3100 mm • Ponovljivost: 0,3 mm Godpfez Rnd Uox Abrekc • Krmilnik: IRC5 M2004 Rabljen izdelek – prisotne so normalne sledi uporabe. Dodatne podrobnosti, številke izdelkov in slike so na voljo na zahtevo. Dve tedna garancije za zagon. Brez dodatnih garancij. Poleg tega so nadomestni deli stalno na voljo v skladišču. Navedeni znesek je neto in velja za en izdelek. Zakonsko predpisani davek na dodano vrednost (DDV) v višini 19 % se doda ob zaključku nakupa. Prejeli boste urejen račun z navedenim DDV. Osebni prevzem na naslovu 74722 Buchen/Hainstadt. Stroški pošiljanja ali špedicije se razlikujejo glede na količino, težo in želene pogoje dostave. Stroški pošiljanja v tujino so na voljo na zahtevo – prosimo, navedite državo, kraj in poštno številko. Stroški špedicije so na voljo na zahtevo – prosimo, navedite naslov za dostavo.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1975, BRUSILNI STROJ DISKUS (dvostranski brusilni stroj) DISKUS WERKE AG (FRANKFURT / MAIN), tip DDS 600 P, leto izdelave 1975, POPOLNO PRENOVLJEN leta 2024. Godpozzpaaofx Abrskc

Leto izdelave: 2019, obratovalne ure: 5.500 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The system must be collected by 26.05.23 – placing a bid obligates you to dismantle and collect within the deadline. Gksdpfx Absk H D Haorec TECHNICAL DETAILS: Max. workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1,000 kg Travel ranges: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Control: Fanuc 31i-WB Installation dimensions: 2,440 x 2,680 mm Machine hours: 5,500 h