Wmt Maschinenheber 10T nakup rabljenega (1.170)

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air Kdodpfxsfv Awae Ah Uju • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: novo, Clamping range of the chuck: 10 - 200 mm Height: 67.5 mm Bore: 65 mm Kjdpfjfv Awlex Ah Ujdu Outer diameter of chuck: 200 mm Outer diameter of clamping lever: 360 mm Weight: 4 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers enable rapid workpiece changes. • Low weight and flat design minimize change in center of gravity. The D-D quick-change chuck allows for fast product changes and is ideally suited for frequent component replacement. No separate quick-release key is required, as the levers are integrated into the quick-change chuck.

Stanje: novo, Clamping range of the chuck: 80 - 280 mm Height: 67.5 mm Bore: 100 mm Chuck outer diameter: 300 mm Clamping lever outer diameter: 480 mm Weight: 13 kg Features: • Self-centering. • Reversible jaws. • Fixed clamping levers allow for rapid workpiece changes. • Lightweight and low-profile design minimizes shift in center of gravity. Ksdpfxefv Awpe Ah Usdu The D-D quick-change chuck enables rapid product changeover and is ideally suited for frequent component interchange. No loose quick-change key is required, as the levers are integrated into the quick-change chuck.

Stanje: novo, Table diameter 600 mm Table load capacity 0.6 t Swivel range 0 - 90 degrees Rotation speed 0.1 - 1.8 rpm Kodpsfv Awzjfx Ah Ujdu Torque at faceplate 450 Nm Pass-through diameter in table 80 mm Welding current 500 amperes Total power requirement 0.18 + 0.18 kW Machine weight approx. ... t TURN-TILT TABLE WITH LARGE THROUGHBORING • Self-locking gearbox, no lead or follow-up movement under eccentric load. • Electronic components by Siemens and Schneider. • Frequency-controlled, highly precise speed regulation. • Turntable with large through bore and T-slots. • High stability thanks to clever construction. • CE certificate. • Excellent price/performance ratio. • The D-TLP series is supplied with remote control and foot pedal (left/right).

Stanje: novo, Table diameter: 1200 mm Table load capacity: 1.2 t Swivel range: 0 - 120 degrees Rotational speed: 0.06-0.6 rpm Torque at faceplate: 2400 Nm Table through-hole: 200 mm Welding current: 500 amperes Total power requirement: 0.75 + 1.1 kW Machine weight approx. 1.0 t ROTARY TILTING TABLE WITH LARGE THROUGH-BORE - Self-locking gearbox: no forward or backward movement under eccentric load. - Electronic components by Siemens and Schneider. - Frequency-controlled for precise speed adjustment. - Rotary table with large through-bore and T-slots. Ksdpfsfv Aw Nsx Ah Usdu - High stability due to intelligent design. - CE certified. - Excellent price/performance ratio. - The D-TLP series comes equipped with remote control and foot pedal (left/right). No original images. Construction type identical.

Stanje: novo, Table diameter: 1,400 mm Table load capacity: 2.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.05 - 0.5 rpm Torque at face plate: 6,000 Nm Table through-hole: 200 mm Welding current: 700 amperes Total power requirement: 1.1 + 2.2 kW Machine weight: approx. t ROTARY TILTING TABLE WITH LARGE THROUGH-HOLE • Self-locking gearbox – no overrun or backdriving with eccentric loads. • Electronic components by Siemens and Schneider. • Frequency-controlled for precise speed regulation. • Rotary table with large through-hole and T-slots. • High stability due to ingeniously engineered construction. • CE certified. Ksdpfx Asfv Aw Tjh Uodu • Excellent price-to-quality ratio. • The D-TLP series is supplied with remote control and foot pedal (left/right).

Stanje: novo, Table diameter: 2500 mm Table load capacity: 20.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.04 - 0.4 rpm Torque at faceplate: 40,000 Nm Through-hole in table: 200 mm Welding current: 1000 Amps Total power requirement: 5.5 + 11.0 kW Machine weight approx.: t TURN-TILT TABLE WITH LARGE THROUGH-HOLE • Self-locking gearbox, no forward or backward movement with eccentric load. • Electronic components by Siemens and Schneider. Kdodpfefv Axmex Ah Uou • Frequency-controlled, very precise speed regulation. • Turntable with large through-hole and T-slots. • High stability due to clever design. • CE certification. • Excellent price/quality ratio. • The D-TLP series comes with remote control and foot pedal (left/right). No original photos. However, construction is identical.

Stanje: novo, Table diameter: 780 mm Table load capacity: 1.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.15 - 1.5 rpm Table height adjustment: from 780 to 1560 mm Kodefv Ay Sjpfx Ah Ujdu Torque at faceplate: 1000 Nm Welding current: 500 amps Features - Self-locking gearbox, no creep or run-on with eccentric load - Hydraulic height adjustment allows for almost unlimited positioning - Electronic quality components from Schneider, Siemens, and Delta - Italian hydraulic components - Frequency-controlled, stepless speed of the turntable - High stability due to heavy and compact construction - CE certificate - Excellent price-performance ratio - Supplied as standard with remote control and dual foot pedal - 3 years warranty (see warranty conditions)

Stanje: novo, Table diameter: 1600 mm Table load capacity: 8 t Swivel range: 0–130 degrees Rotational speed: 0.05–0.5 rpm Table height adjustment: from 1210 to 2238 mm Torque at faceplate: 1200 Nm Welding current: 700 amperes Features • Self-locking gearbox – no pre- or post-rotation with eccentric load • Hydraulic height adjustment allows virtually limitless positioning Kjdpfx Ahofv Azho Ujdu • Electronic quality components from Schneider, Siemens, and Delta • Italian hydraulic components • Frequency-controlled, stepless turntable speed • High stability due to heavy-duty, compact design • CE certificate • Excellent price-performance ratio • Supplied as standard with remote control and dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: novo, Load capacity: 10 t Workpiece diameter: 320 - 3200 mm Roller diameter: 300 x 120 mm Feed rate: 100 - 1000 mm/min Total power requirement: 1.1 kW Features • Self-aligning for multiple diameters Kdsdpofv A Dcofx Ah Uou • Electronic quality components by Schneider/Siemens/Delta • Infinitely variable speed of drive unit • Polyurethane coating of rollers • Optimal load distribution (4 rollers per unit), especially gentle on workpieces with thin walls and sensitive surfaces • Remote control via cable and dual foot pedal • CE certificate • 3-year warranty (see warranty terms)

Stanje: novo, Load capacity 20 t Workpiece diameter 500 - 3800 mm Drum diameter 350 x 150 mm Feed rate 100 - 1000 mm/min Total power requirement 1.5 kW Machine weight approx. 1.8 t Dimensions (LxWxH) 2.2 x 2.7 x 0.9 m Kedpfxefv A Dge Ah Uedu Features • Self-aligning for multiple diameters • Electronic quality components from Schneider/Siemens/Delta • Steplessly adjustable drive unit speed • Polyurethane-coated running rollers • Optimal load distribution (4 rollers/unit), especially gentle on workpieces with thin walls and sensitive surfaces • Remote control via cable and dual foot pedal • CE certificate • 3-year warranty (see warranty conditions)

Stanje: novo, Load capacity 5 t Workpiece diameter 250 - 2500 mm Drum diameter 250 x 100 mm Feed rate 100 - 1000 mm/min Total power requirement 0.75 kW Features • Self-aligning for various diameters • Electronic quality components from Schneider/Siemens/Delta • Infinitely variable speed adjustment of the drive unit • Drive rollers made of robust rubber in a steel frame • Optimal load distribution (4 rollers/unit), especially gentle for workpieces with thin walls and sensitive surfaces • High stability due to the machine’s solid construction • CE certificate • Excellent price-performance ratio • Remote control (wired) and dual foot pedal Ksdsfv A D Depfx Ah Uedu • 3-year warranty (see warranty terms)

Stanje: novo, Load capacity 10 t Workpiece diameter 320 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 1.1 kW Features • Self-aligning for multiple diameters • Electronic quality components from Schneider/Siemens/Delta • Infinitely variable drive unit speed • Running rollers made of strong rubber encased in steel • Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with thin walls and sensitive surfaces • High stability due to the machine's robust construction • CE certificate • Excellent price-performance ratio • Remote control (with cable) and double foot pedal Kdjdpfx Ajfv A D Ioh Usu • 3-year warranty (see warranty conditions)

Stanje: novo, Nosilnost 40 t Premer obdelovanca 600 - 4500 mm Premer bobna 400 x 160 mm Pomik 100 - 1000 mm/min Skupna potrebna moč 3 kW Značilnosti • Samodejno prilagajanje za različne premere • Elektronske kakovostne komponente Schneider/Siemens/Delta • Brezstopenjsko nastavljiva hitrost pogonske enote Kodpfjfv A Easx Ah Uedu • Tekalni valji iz močne gume v jeklenem ohišju • Optimalna porazdelitev obremenitve (4 valji/enota), posebej prijazna za obdelovance z majhno debelino stene in občutljivo površino • Visoka stabilnost zaradi masivne konstrukcije stroja • CE certifikat • Zelo dobro razmerje med ceno in zmogljivostjo • Daljinski upravljalnik (na kablu) in dvojno nožno stikalo • 3 leta garancije (glej garancijske pogoje)

Stanje: novo, Širina pločevine: 2070 mm Debelina pločevine: 4 mm Razdalja med stojali: 2100 mm Premer zgornjega valja: 140 mm Teža stroja: pribl. 0,37 t Stroj za upogibanje pločevine z: - Zmogljivostjo 2070 x 4 mm - Električno nastavljiv: zadnji valj in vpenjanje Kdsdefv H A Uspfx Ah Usu - Digitalni prikaz za zadnji valj in vpenjanje - Kaljeni valji - Konusno upogibanje - Izvlečni zgornji valj - Varnostna naprava zasilne vrvice - Dokumentacija

Stanje: novo, Sheet thickness 1.2 mm Roller diameter 62 mm Kodpsfv H Edefx Ah Ujdu Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Machine is equipped with: - Emergency stop switch - Foot pedal - 7 sets of rollers

Stanje: novo, Solid round stock 35 (600) mm Solid square stock 35 (900) mm Angle steel 50 x 50 x 5 (800) mm T-bar – web outward 60 x 7 (600) mm Shaft diameter 50 mm Working speed 4.5 m/min Total connected load 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.1 x 0.8 x 1.5 m Profile bending machine featuring: - Foot pedal for right/left rotation - Mounting: 50 mm shaft - with digital display - Hardened special steel shafts - 1 set of standard rollers - 2 driven rolls - Top roller hydraulically adjustable up and down Kdodpfx Aofv H Etjh Uou - Horizontal and vertical operation - Motor with brake device

Stanje: novo, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 820x610 mm Cutting range at 45 degrees: round 550 mm Cutting range at 45 degrees: square 550 mm Cutting range at 45 degrees: flat 550x600 mm Cutting range at 60 degrees: round 370 mm Cutting range at 60 degrees: square 370 mm Cutting range at 60 degrees: flat 370x600/450 mm Saw blade length 7260 x 41 x 1.3 mm Blade speed 15 - 100 m/min Table height 800 mm Ksdofg E Hmepfx Ah Usdu Total power requirement 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double-mitre band saw for rapid cutting with pusher system P15. Option: P30 Hydraulic saw frame lowering • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new “B&S positioning system”. An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake, featuring large-radial center positioning. The work table is mounted with high-quality preloaded bearings to ensure very smooth rotation. CNC control A CNC control allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Dual-side gripping positioning system The B&S pusher system, feeding and positioning device, is equipped with “dual-side opening grippers” which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is structurally separate and guided via ball-bearing linear rails, a precision-ground rack, and a robust, frequency-driven gear motor.

Stanje: novo, Cutting diameter round: 900 mm Ksdpfx Aofg E Hpoh Usdu Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting diameter (round): 355 mm Cutting diameter (square): 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Kodpfx Ahsfg E Hzo Usdu Shark 350 NC HS 5.0, automatic hydraulic band saw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, can be installed on the right or left side of the machine. + Adjustable clamping pressure for the vices. + Infeed conveyor with vertical rollers for lateral material support. + Numerically controlled band saw machine, also operable in semi-automatic mode, with the new MEP 50 CNC control system, specially developed by MEP for automatic machines, based on Windows CE. + "Clean cut" cycle: The feeder pushes the workpiece backwards at the end of the cut to avoid scoring on the cut surface when the saw band returns upwards. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with a 7" touch-screen display and mechanical buttons for all machine operations, ensuring reliable, simple, and intuitive operation, as well as real-time monitoring of all cutting parameters.

Stanje: novo, Cutting diameter 250 mm Kdedpfxefg E H Is Ah Uju Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t MEP Sawing Machine: Saw frame, vise unit, and base made of high-strength cast iron Precision angle scale on the cast iron structure Electrical system (with fully identifiable wiring and 24 V low voltage system) Switch handle IP 55 for manual cycles (if applicable) Rotating chip removal brush for the saw band Vise unit with quick approach Precise stops with setting for miter cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, user manuals, and spare parts order instructions in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual mode and cutting with automatic head feed by gravity. CCS (Cut Control System) with (A: selector switch for manual and automatic cutting – B: adjustment of the cutting speed – C: hydraulic brake with reservoir – D: end stop for stopping the band); also available as an option for already produced machines. Quick-adjust vise Hydraulic indicator for band tension Electric coolant pump for cooling and lubricating the saw band and easily accessible coolant tray above the base frame On versions with pneumatic vise (MA), opening and closing of the vise are controlled by a manual valve (optionally foot-operated).

Stanje: novo, Premer reza 250 mm Dolžina tračnega lista 2950x27x0,9 mm Kdedpfx Asfg E H Noh Ueu Hitrost tračnega lista 36/72 m/min Skupna priključna moč 1,8 kW Teža stroja pribl. 440 kg Absolutna posebna cena!! 7170,-EUR (Aktualna cena od 2024 je 9425,-EUR) Osnovna oprema: Vpenjalna čeljust s hitro nastavitvijo in nastavljivimi vodili Hidravlična naprava za napenjanje traku z indikatorjem napetosti Podnožje s snemljivo kadjo za hladilno tekočino Krtača za odstranjevanje ostružkov Nastavljeni precizni prisloni za reze pod: 0°, 45° in 60° levo ter 45° desno Obračevalna plošča za dvojne poševne reze Električna naprava za dovod hladilne tekočine 48 V (Možna dodatna namestitev mikro-razpršilne enote)

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported. Kedpfx Aofg E Ibjh Uedu

Stanje: rabljeno, Thread diameter M3 - M12 mm Infinitely variable speed 400 rpm Torque 25 Nm Air pressure 6 - 8 bar Working area radius 1000 mm Machine weight approx. 12 kg Demonstration unit! Pneumatically driven tapping machine for M3 - M12 threads, featuring: - Stable and flexible articulating arm. Kodpefg U Smofx Ah Ujdu - 6 quick-change chucks with slip clutch. Documentation in English!! Optional: - Clamping table with T-slot mounting surface 900 x 600 mm

Stanje: novo, Drilling capacity in steel: 30 mm Tapping capacity: M20 Throat depth: 260 mm Quill stroke: 125 mm Spindle taper: MT 3 Spindle speeds: 80 - 1440 / 180 - 3200 rpm Kjdpfefg U Tpex Ah Ujdu Gear stages: 2-stage Column diameter: 110 mm Table size: 500 x 365 mm Total power requirement: 0.8 / 1.4 kW Machine weight: approx. 0.27 t Space requirement: approx. 0.4 x 1.2 x 1.9 m Auction Autumn/Winter 2003 Powerful, precise column drilling machine with a wide range of applications. Drill table adjustable via rack and pinion as well as worm gear, and can be swivelled around the column. Forward/reverse switch. Emergency stop push button. Full motor protection. Star grip. Digital speed display as standard.