Enota obračanja plovila

DUMETA D-TLRS-20-D

Stanje: rabljeno, Leto izdelave: 1990, I-beam, flat: 140 x 140 x 13 mm I-beam, upright: 120 x 120 x 13 mm Angle steel: 130 x 130 x 12 mm Round steel: 85 mm Bending capacity – flat bar: 125 x 25 mm Flat bar on edge: 65 x 65 mm Including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203 mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) Lsdpfxstt Ecdo Ahuern 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32 / 32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Stanje: novo, Maximum welding current: 300 A Open-circuit voltage: 55 - 76 V Lodpfx Asu Aw Shohuern Supply voltage: 400 V Weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Shielded gas welding machine: - with pulse function - 300 Ampere - 400 Volt - 3 m torch hose package - Earth cable - Wire feed rollers for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0 mm

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Lrodpfshcnhmjx Ahuen Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 70/2 M - Two driven rollers - Dual adjustment of the upper roller - Operation possible in both horizontal and vertical positions Ledpfjt Hwfnjx Ahujrn - Shafts supported by tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Bending capacity: up to 60x10 mm (vertical orientation) - Round tube up to 80x2 mm - Angle iron up to 50x50x5 mm - Solid material up to 35 mm - Weight: 400 kg

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Ledpogvkktofx Ahujrn Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control - Very high stability – compact model - Through-hole in the turntable - CE marking

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Container Rotator with 10 Ton Load Capacity - Infinitely variable speed control - Hand and foot remote control - Suitable for diameters from 320 mm to 2,800 mm Lodpfx Ahjd Nmx Teuern - Roller diameter: 300 mm - Speed: 6 - 60 m/h - Power: 2 x 0.55 kW

Stanje: novo, Leto izdelave: 2025, nosilnost: 20.000 kg, 20-ton container rotator, turning rolls, complete set 380 V, infinitely variable speed adjustable from 200 to 1000 mm/min. Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support rollers temperature resistance: 100°C Dual synchronized drive AC motor, 380 V, 750 W With hand and foot remote control, complete set Lrjdpfx Ajifgu Ujhujn

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control Lodpfx Aof Ep Diohuorn • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: kot nova (razstavni stroj), Fronius TPS 3200 ✅ Scope of delivery: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The unit shuts down if the water cooling fails or overheats to protect the torch assembly. These features typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most sensible wire feed case. The wire spool is safely stored inside the closed case. ➤ Fronius intermediate hose package, long version – each unit includes a 5-meter connecting hose set between the power source and wire feeder for greater flexibility and improved handling. Take the wire feed case off the machine to reach difficult areas! The connecting hose is neatly mounted on a hook at the side of the unit (hooks are manufactured by us). ➤ Fronius large transport cart – Probably the best cart with gas cylinder holder on the market. ➤ Binzel torch package – With up/down amperage adjustment on the torch handle. ➤ Earth cable 3–4m Dobkh Hjum Rw Dsufpokk (unclear term left untranslated) ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools With this equipment you can weld nearly all materials, including aluminium, steel, and V2A. It features cold wire programmes and is also suitable for Mig brazing (CuSi), which is widely used in sheet metalworking. Additional options available for a surcharge, for example Fronius Job Master torch package (display on torch) + EUR 500.00 ----- Lsdowbilxepfx Ahuern IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna, Austria 1230! ✔ Insured shipping on pallet available! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the equipment? For clarification: we buy nearly new pre-owned units, dismantle and check everything, replace wear parts if necessary, and only release for sale after successful test welding. "All" equipment is clean and has neither burn marks on the display nor multiple burn holes or dents across the unit! You are buying an item from us that is also ⭐worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for an intra-Community delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Prepayment or cash on collection in person. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always stock 60–80 units – exclusively Fronius, no other brands! We know these machines inside out and never sell anything we aren't fully familiar with.

Stanje: novo, Load capacity: 5.0 t Workpiece diameter: 100 – 2500 mm Total power requirement: 2 x 0.37 kW Max. payload drive unit: 2500 kg Ljdpfxjgvwgco Ahujrn Max. payload idler unit: 2500 kg Table rotation speed: 100 – 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight: approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)