Varjenje rotacijska miza

DUMETA D-TLP-020

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Giedpfx Afjg Tdpgjqsl Hand and foot remote control with speed display Very robust construction

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Giedod Ab H Hjpfx Afqol Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, obratovalne ure: 15.000 h, Stopnja kompresorja Atlas Copco po obnovi. Giodemzbdwspfx Afqol

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Giedpfjrypmgsx Afqel Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Stanje: novo, Leto izdelave: 2024, nosilnost: 5.000 kg, Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Godpsl Dq U Ujfx Afqoil Tilted height min: 800 mm Tilted height max: 1900 mm Horizontal height min: 1050 mm Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Rotational speed from 0.01 to approx. 0.9 rpm CE certification

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilting angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Gijdjdvn E Uopfx Afqsl Dimensions with horizontal table: 1,200 mm to 1,900 mm

Leto izdelave: 2018, Stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Gsdpfx Ajhua Dqefqeil Very robust construction

Leto izdelave: 2025, Stanje: novo, The RS-9 has been specifically developed for the efficient and trouble-free processing of various types of paper. The parameters are personalized depending on the machine with which it will be used. The shredder enables fast and safe shredding of paper, which can be taken directly from the die-cutting machine, allowing for easy transport to the baler via a conveyor system. The RS-9 shredder is designed to reduce waste from a die-cutting machine for straightforward transport via a belt system. Godsiklxbspfx Afqoil Our shredder is simple to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 also features retractable shafts, ensuring worker safety and extending the service life of the device. The machine is fitted with a frequency inverter that allows for soft starting and precise motor control. Feel free to contact us.

Stanje: novo, Original Siegmund welding table perforated plate Octagonal, 2D or 3D 1200 x 200 mm with 28 mm holes 514 kg, diameter 1300 mm Plasma-nitrided Gsdpet Sk Ndefx Afqoil Original price €8,900 Half price when purchased together with positioner Sold only in combination with positioner Hole mount: 8 holes, 500 x 500 mm, diameter 18 mm (see photo)

Leto izdelave: 2018, Stanje: kot nova (razstavni stroj), Welding positioner KT 50 Horizontal load capacity: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Infinitely adjustable tilt range via geared crank motor: 0 – 90° Speed: 1.7 – 15 rpm Incl. foot remote control Gedpjd A Etyefx Afqeil