Stroj Za Površinsko Brizganje nakup rabljenega (92.981)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stork S+ 6600-5650 Vbrizgalni stroj Krmiljenje: CDS700 Letnik izdelave: 2011 Stroj je v zelo dobrem tehničnem stanju, popolnoma delujoč in pripravljen za takojšnje delo v industrijskem obratu. Enota za zapiranje Dwsdexyqyfepfx Afloa Zapiralna sila: 6600 kN Dimenzije pritrdilnih plošč (V × Š): 1370 × 1370 mm Razmak med vodilnimi stebri (V × Š): 900 × 900 mm Minimalna / maksimalna višina orodja: 300 – 900 mm Maksimalni hod odpiranja: 1840 mm Premer centrirnega obroča: 200 mm Hod izmetalca: 300 mm Vbrizgalna enota Premer polža: 84 mm Volumen vbrizga: 2575 cm³ Teža vbrizga (PS): 2369 g Tlak vbrizga: 1650 bar Maksimalna hitrost vbrizga: 500 mm/s Dodatna oprema Pnevmatski ventili – 6 kos Jedro – 1 kos Stroj je na voljo za ogled in testiranje pod napetostjo. Po želji pošljemo slike in video predstavitev delovanja. Pomoč nudimo pri nakladanju in organizaciji prevoza.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stork S+ 9000-12550 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2011 Clamping Unit: Clamping Force [kN]: 9000 Platen Dimensions (HxV) [mm]: 1570 x 1560 Dwodewrna Aepfx Aflsa Clearance Between Tie Bars (HxV) [mm]: 1010 x 1010 Min./Max. Mould Height [mm]: 300–1190 Maximum Daylight Opening [mm]: 2290 Locating Ring Diameter [mm]: 250 Maximum Ejector Stroke [mm]: 300 Injection Unit: Screw Diameter [mm]: 115 Injection Volume [cm3]: 6232 Shot Weight PS [g]: 5733 Injection Pressure [bar]: 1740 Maximum Injection Speed: 300 Additional Equipment: Pneumatic Valve – 6 pcs Core Pull – 1 pc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • L/D ratio: 22 • Theoretical shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticising capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / nozzle contact force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open air injection rate with accumulator (option): 1,812 cm³/s Dsdpfxjwzy N Uj Aflowa • Cylinder heating power: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Maximum opening stroke: 2,100 mm • Min./max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector stroke / force: 300 mm / 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump power: 90 kW • Heating capacity: 53.9 kW • Oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, BRIZGALNI STROJ BATTENFELD HM 270/1330 Leto izdelave: 2005 Enota za zapiranje Zapiralna sila: 2700 kN Dimenzije montažnih plošč: 1030 × 1020 mm Razmik med stebri: 710 × 630 mm Minimalna višina orodja: 350 mm Maksimalno odpiranje orodja: 1150 mm Premer centrirnega obroča: 160 mm Maksimalni hod izmetalca: 200 mm Brizgalna enota Premer polža: 55 mm Prostornina brizga: 650 cm³ Teža brizga (PS): 565 g Tlak brizganja: 2040 bar Dedpoziuguofx Aflowa Maksimalna hitrost brizganja: 144 mm/s Dodatna oprema 1 × pnevmatski ventil 3 × hidravlična jedra Dimenzije in masa Dolžina stroja: pribl. 6 200 mm Širina stroja: pribl. 1 800 mm Višina stroja: pribl. 2 300 mm Masa stroja: pribl. 12 500 kg Stroj je na voljo za ogled po predhodnem dogovoru. PIMM Machinery

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Vbrizgalni stroj Krauss Maffei KM 300-2000 CX Letnik proizvodnje: 2010 Krmiljenje: MC5 Tip: Hidravlični vbrizgalni stroj Oprema Popolnoma hidravlični sistem zapiranja Krmiljenje MC5 z barvnim monitorjem Integriran nadzorni panel 3 USB-priključki Sistem za plastificiranje za termoplastične materiale Vijačnik Ø 70 mm z zaščito proti obrabi Povratna zapora Odprta šoba Enota za zapiranje Sila zapiranja: 3000 kN Dimenzije plošč: 995 × 1050 mm Razdalja med stebri: 630 × 630 mm Hod odpiranja: 820 mm Maksimalno odpiranje: 1150 mm Minimalna višina matrice: 330 mm Hod izmetalnika: 200 mm Sila izmetalnika: 57,7 / 28,3 kN Enota za vbrizg Premer vijačnika: 70 mm Tlak vbrizga: 1877 bar Dwedpfx Afjzkafloloa Volumen vbrizga: 1078 cm³ Masa vbrizga (PS): 981 g Proizvodnja vbrizga: 385 cm³/s Proizvodnja vbrizga z akumulatorjem: 1155 cm³/s Hitrost vrtenja vijačnika: 220 / 310 vrt/min Sistem za plastificiranje Za termoplastične materiale Zaščita proti obrabi Povratna zapora Odprta šoba Elektrohidravlični sistem Moč motorja črpalke: 55 kW Moč grelnih elementov: 29,2 kW Število grelnih con: 6 Število suhih ciklov: 1350 ciklov/h Kapaciteta rezervoarja za olje: 720 l Dimenzije in masa Dimenzije: 6500 × 2200 × 2300 mm Masa: 14,5 t

Stanje: zelo dobro (rabljeno), Vbrizgalni stroj ENGEL e-cap 3440/420 T Osnovni podatki • Proizvajalec: ENGEL • Model: e-cap 3440/420 T • Letnik proizvodnje: 2012 • Vrsta stroja: Popolnoma električni vbrizgalni stroj • Nadzorni sistem: ENGEL CC200 • Delovne ure: 63.000 ur • Premer vijačnega valja: 80 mm Tehnični podatki Enota za zapiranje • Sila zapiranja: 4.200 kN (420 ton) • Vrsta zapiranja: kolenski, popolnoma električni • Hod odpiranja: 700 mm • Minimalna višina kalupa: 350 mm • Maksimalna višina kalupa: 750 mm • Dimenzije pritrdilnih plošč: 1350 × 1350 mm • Razdalja med stebri: 920 × 920 mm • Hod izmetalnika: 220 mm • Sila izmetalnika: 120 kN • Maksimalna masa kalupa: 6200 kg Vbrizgalna enota • Velikost enote: 3440 • Premer vijačnega valja: 80 mm • Volumen vbrizga: 1709 cm³ • Maksimalni tlak vbrizga: 1950 bar • Število ogrevalnih con: 6 Oprema • Nadzorni sistem ENGEL CC200 • Popolnoma električni pogoni vseh osi • Energetsko učinkovita tehnologija ENGEL e-cap Djdpjzlgi Hofx Aflewa • Izjemno visoka natančnost in ponovljivost procesa • Prilagojen za neprekinjeno delo 24 ur na dan, 7 dni v tednu Zgodovina stroja Stroj je bil od začetka uporabljen za proizvodnjo vedre iz plastike. Nikoli ni bil uporabljen za proizvodnjo pokrovčkov PET, čeprav je bila serija e-cap zasnovana prav za to vrsto uporabe. Povprečni čas cikla je bil približno 15 sekund. Zaradi tega je enota za zapiranje opravila precej manj delovnih ciklov kot običajni stroji e-cap, ki se uporabljajo za proizvodnjo pokrovčkov, kjer je čas cikla običajno manjši od 2–4 sekund. To pomeni potencialno manjše mehansko obrabo v primerjavi s stroji, ki se uporabljajo v skladu z njihovo prvotno namenjenostjo.

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice Dsdpfjwd Tx Usx Aflewa

Stanje: rabljeno, Leto izdelave: 1980, Workpiece diameter: 600 mm Workpiece weight: 400 kg Workpiece height: 300 mm Total power requirement: 35 kW Machine weight approx.: 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model: SWR 60 T NC-K Year of manufacture: 1980 Serial No.: 169371080 _____ Grinding area: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Infinitely variable table speed: 20 – 80 rpm Swing diameter approx.: 800 mm Max. grinding height above magnet: 300 mm Vertical movement of grinding head: 220 mm Cross-feed travel of grinding carriage: 320 mm Maximum table load: 400 kg Automatic vertical feed: 0.01 – 0.2 mm/stroke Grinding spindle speeds, steplessly adjustable: 1,000 – 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive approx. max.: 28 kW Total power: 35 kW – 380 V – 50 Hz Weight: 4,500 kg Accessories / Special equipment: - Control panel at the machine with adjustment options for stepless grinding spindle speed (potentiometer) and analog display of cutting speed in m/sec. as well as ampere display - Stepless table speed, infinitely variable cross-feed speed of the grinding carriage, and stepless vertical feed of the grinding wheel with ROUGHING/FINISHING/SPARKOUT, each adjustable via potentiometer, with dressing monitor for switching rapid vertical traverse to grinding carriage intermittent mode - Hand control panel with push buttons for manual machine operation, such as: dressing unit forwards/backwards, cross-slide forwards/backwards or creep feed, vertical slide up/down or creep feed - 2 preset counters for setting pre-dimension and finish-dimension with automatic shut-off Selector switch +1μ/-1μ, digital Y-axis display - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and stroke - Built-in standard polarity magnet approx. 600 mm Ø - Freestanding control cabinet and separate small coolant pump Condition: satisfactory to good – ready for demonstration under power / ideal for reworking and calibration tasks, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Here is the link to the video: Dwodpfx Afot Abrwoloa Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year 1980 Serial No. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing Ø approx.: 800 mm Infinitely variable table speeds: 20 – 80 rpm Max. grinding height above table approx.:

Stanje: rabljeno, Leto izdelave: 1969, Rotary table diameter: 1000 mm Grinding height: 500 mm Grinding head drive power: 15/5.5 kW Total power requirement: 30 kW Machine weight: approx. 18 t Space requirement: approx. ... m S I E L E M A N N Vertical Rotary Table – Surface and Internal Grinding Machine with 2 grinding heads Type RFsB 100 #8185 Year of manufacture: 1969, but completely overhauled by the manufacturer in 1990 _____ Rotary table - face plate diameter: Ø 1,000 mm Distance from table center to column: approx. 1,150 mm Installation height table/grinding heads: approx. 500 mm Workpiece height: approx. 400 mm Reach of grinding heads: approx. 500/700 mm Max. workpiece weight: approx. 900 kg Table speed hydraulic, stepless, CW/CCW (14.5 kW): 5–60 rpm Table longitudinal stroke: approx. 550 mm Table feed (internal/external grinding): 0.0025 - 0.025 mm/stroke Table oscillation (stroke) / slow feed 0.2 m: 0.2 - 1,000 mm/min Table dwell time at stroke reversal: 0-10 sec. Grindable bore diameters: approx. 0–900 mm Grinding slide stroke for both heads: approx. 500 mm Maximum internal grinding spindle diameter: 140/100 mm Surface grinding head diameter (segment wheel): 450 mm Motor drives for surface and internal grinding heads: 15 / 5.5 kW Dedpeu Su Apefx Aflewa Total drive approx. 30 kW - 380 V/50 Hz * Weight approx. 18,000 kg Accessories/Special equipment: • The rotary table rotates with the workpiece and also carries out the feed movement • The respective grinding head is swiveled in by turning the column (hydraulic lifting), so that the workpiece can be machined accurately in a single clamping operation • Additional height adjustment of the internal grinding slide by approx. 150 mm • Digital display of grinding wheel speeds • Grinding wheel dressing devices mounted on the grinding tower and can be swung in manually • Separate hydraulic system * separate control cabinet * • Magnetic chuck with stepless holding force adjustment, various small parts • Currently no coolant system The machine is ideal for grinding heavy and irregularly shaped workpieces, gears, ball bearings, housings and circular knives, and is highly versatile and accurate for other grinding tasks as well. Condition: good – soon ready for demonstration. A video can be found here: Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A wide range of other grinding machines always in stock – please inquire with us. Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and errors in technical data: S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and horizontal workpiece clamping Model RFsB 100 ...

Stanje: rabljeno, Leto izdelave: 1998, Grinding length 2000 mm Grinding width 600 mm Total power requirement 17 kW Machine weight approx. 10 t O F F E R We are pleased to offer you—subject to prior sale and errors—ex stock: GEIBEL & HOTZ CNC Cycle-Controlled Surface and Profile Grinding Machine Model FS 2060 - GT SL Year 1998 Serial no. 1013220998 _____ Maximum grinding length (max. table longitudinal movement 2,050 mm): 2,000 mm Maximum grinding width (max. cross movement 600 mm): 600 mm Maximum grinding height under the wheel: approx. 600 mm Table-to-spindle center distance min. / max.: 180 – 800 mm Table size: 2,300 x 550 mm Magnetic chuck size: 2,000 x 600 mm Maximum table load: 3,110 kg Table speed: 0 – 35 m/min Intermittent cross feed: 0.5 – 60 mm/stroke Dwedpfx Ajv S Ip Eeflea Cross rapid traverse: 0 – 4,000 mm/min Standard grinding wheel size: 400 x 100 x 127 mm Infinitely variable grinding spindle speeds: 1,000 – 3,000 rpm Grinding spindle drive approx.: 11 kW Total drive approx.: 25 kW - 400 V – 50 Hz Weight approx.: 9,500 kg Accessories / Special Equipment: • Dialog-guided GEIBEL & HOTZ automatic grinding cycle control Type SL for 3 axes. Graphic input support for data entry either as absolute values or via teach-in process for pre-programmed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and clear monitoring of axis movements and work progress. • Electronic handwheel for 3 axes X, Y, Z with selectable feed increment: 0.01 / 0.1 / 1 mm/rev. • Table movement via roller-ring screw drive (GT), enabling both very high and very low table speeds with constant torque and very high efficiency. • Cross and vertical movements via ballscrew drive with incremental glass scale encoder. • Single-point diamond dresser mounted on the table. (Previously equipped with an electric straight-line dressing device EGA 100, but this is currently not present.) • MPM fully automatic balancing device AB 100 (flange-mounted sensor currently missing). • Fine-pole electromagnetic chuck 2,000 x 600 mm with adjustable holding force. • Wet grinding equipment with universal paper belt filter system UPF 100 with magnetic separator. • Fully enclosed work area with electrically monitored sliding doors. • Separate control cabinet, separate mobile control panel, various accessories, operating manuals. Condition: Good to very good! Suitable for all grinding applications! A video of the machine will be available here soon. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Grinding length 500 mm Grinding width 250 mm O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: ABA Universal Surface Grinding Machine “made in Germany” Model easyGrinder 5 Year of manufacture 2015 _____ Max. grinding length (table longitudinal travel 600 mm) 500 mm Max. grinding width (cross travel max. 300 mm) 250 mm Grinding height under wheel with / without magnetic chuck 400 / 420 mm Max. vertical travel 550 mm Distance table – spindle center min. / max. 100 / 650 mm Magnetic chuck size 500 x 250 mm Max. table load 400 kg Table speed 2 – 30 m/min Max. cross/vertical feed rate 500 / 1,700 mm/min Grinding wheel dimensions 300 x 50 x 76.2 mm Max. grinding spindle speed 1,450 rpm Grinding spindle drive approx. 5.5 kW Total drive approx. 8 kW – 400 V – 50 Hz Weight approx. 3,000 kg Accessories / Special Features: • ABA proprietary program control with touchscreen color display for surface and plunge grinding. Intuitive operation using graphic-assisted input and teach-in procedures for manual and automatic grinding cycles – especially suitable for workshop operations! • Portable control panel allowing adjustments during automatic operation • Table motion via toothed belt drive – ideal for fast grinding of smaller workpieces • Feed (Y-axis) via ball screw, linear guides on all axes • Table-mounted dresser with automatic dressing cycle, including compensation • BRAILLON magnetic chuck EPEFINE2 500 x 250 mm, fine pole division and adjustable holding force • Fully enclosed work area with electrically monitored sliding doors • Wet grinding system with separately positioned band coolant filter and oil mist extraction unit Djdoxy S Dxopfx Aflswa • Modern LED lighting, various accessories, operating manuals • Compact design: 2,130 x 1,780 x 2,300 mm (plus oil mist extraction unit) Condition : Very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery : ex stock, immediate availability, FCA Metzingen Payment : strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please inquire about your requirements!

Stanje: rabljeno, Leto izdelave: 2013, Grinding length 800 mm Grinding width 400 mm Workpiece height 375 mm Control system Siemens 840 D Total power requirement 18 kW Machine weight approx. 2.6 t O F F E R We are pleased to offer you, subject to prior sale and error, from our stock: GEIBEL & HOTZ CNC horizontal surface & profile grinding machine Model FS 840 KT CNC Year 2013 38040513 _____ Max. grinding length (table longitudinal movement 850 mm): 800 mm Dsdpfx Afjwd Tx Ijlowa Max. grinding width (max. cross movement 400 mm): 450 mm Max. grinding height under wheel approx.: 375 mm Table–spindle center distance min./max.: 140 – 525 mm Standard magnetic chuck size: 800 x 400 mm Maximum table load: 700 kg Table speed: 5 – 35,000 mm/min Cross/vertical speed: 5 – 4,000 mm/min Grinding wheel size: 300 x 50 x 76.2 mm (350 x 100 x 76.2) Maximum cutting speed: 45 m/s Grinding spindle drive approx.: 9 kW Total drive approx.: 18 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special Features: • The machine features a simple, freely programmable SIEMENS CNC control, type 840 D SolutionLine, together with additional GEIBEL & HOTZ grinding software. User-friendly operation, with text and graphical support, easy programming even for complex grinding wheel contours, fast linking of grinding operations, and support for all standard grinding cycles. • Electronic handwheel for all 3 axes. • Table movement via ballscrew drive (KT), enabling both very high and very low table speeds, ideal for profile grinding. • Cross-feed (Z) and vertical feed (Y) via ballscrew drive with incremental glass scale. • Diamond dressing unit mounted on the left side of the table (also for profile dressing); additional driven diamond roll dressing device (mountable on table) with automatic dressing cycle including compensation. • HOFMANN balancing unit EasyBalancer EB3100 (with installed speed and vibration sensors) • Currently only small magnetic chuck 110 x 200 mm is available. • Wet grinding system with free-standing belt filter coolant filter • Complete enclosure with electrically monitored sliding doors, free-standing electrical cabinet, work light, various accessories, and operating manuals. Condition: Good to very good! Suitable for all grinding tasks! A video of the machine will be available here soon. Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net - upon receipt of invoice Always a large selection of grinding machines in stock – ask for your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole • Wet grinding unit with separate band filter coolant filtration Dodpfx Afex Haryjlswa • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!

Stanje: dober (rabljeno), Leto izdelave: 1994, vpenjalna sila: 150 kN, premer vijaka: 55 mm, razmak između stupova: 51 mm, delovna prostornina: 475 cm³, injekcijska masa: 428 g, vgradna višina: 660 mm, Stroj za brizgano oblikovanje – Machine-Engel Dwedozklz Ejpfx Afloa ES 700/150 Sila zapiranja 150 ton Premer vijačnega valja 55 mm Prostornina bata 475 mm Teža vbrizganega izdelka 428 g Višina vgradnje orodja 250 mm – 660 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 79.008 h, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 570 mm, delovna prostornina: 392 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 2.000 g, minimalna višina orodja: 250 mm, dolžina plošče: 795 mm, višina plošče: 795 mm, skupna dolžina: 6.000 mm, skupna širina: 2.000 mm, skupna masa: 10.950 kg, Arburg 570A-2000-170, dvokomponentni hibridni stroj za brizgano oblikovanje s preklopno loputo za sortiranje (243) z preklopno loputo za sortiranje Številka: 243 Razpoložljivost: na zalogi Leto proizvodnje: 2010 Proizvajalec: Arburg Stanje stroja za brizgano oblikovanje: rabljeno Premer vijačnega valja [mm]: 50 // 35 Injekcijska teža [g]: 359 // 105 Injekcijski tlak [bar]: 2000 // 1470 Zaključna sila [kN]: 2000 Razmik med ploščami [mm]: 570 x 570 Velikost plošče [mm]: 795 x 795 Minimalna višina matrice [mm]: Dodpfx Afozq A S Ielswa 250-550 Vrsta upravljanja: Selogica Jezik: angleščina, nemščina Delovni čas [h]: 79008 Teža [kg]: 10.950 Dimenzije [mm]: 6000 x 2000 Lijak za polnjenje: NE Zračni ventil: x5 Veriga za označevanje jedra: 1x

Stanje: potreben popravila (rabljeno), Stroj za brizganje plastike, Engel ES 330/85, Rabljeni stroj Djdpoukn S Hefx Aflewa Kot je prikazano na slikah, je njegovo delovno stanje negotovo. Skupne dimenzije: 3100 x 1950 x 2600 mm Teža: 5500 kg Proizvajalec: Engel Tip: ES 330/85 Leto izdelave: 1997 Električni podatki: 380V, 60 A Krmilne kartice: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211.

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Proizvajalec: Demag, Sumitomo Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Dsdpfxox Sqi Ho Aflowa Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 12.182 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 259303, vpenjalna sila: 1.500 kN, premer vijaka: 40 mm, razmak između stupova: 520 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.000 letvica, injekcijska masa: 184 g, popolnoma električni stroj za brizgano oblikovanje/stroj za brizgano oblikovanje z multigripom, transportnim trakom in zaščitno ograjo iz trenutne proizvodnje Nova cena: 168.000 € Proizvajalec: Arburg Tip: 520 E 1500-400 Krmilnik: Selogica Letnik: 2022 Številka stroja: 259303 Delovni čas: 12.182 ur Brizgalna enota Brizgalna enota/puž 40 mm Prostornina brizga: 201 cm³ Teža brizga: 184 g Moč gretja: 9,7 kW Grelne cone: 5 Dolžina poti šobe: 300 mm, 50 kN Tlak brizga: 2000 bar Zapiralna enota Razdalja med stebri: 520 x 520 mm Velikost plošče: 695 x 695 mm Zapiralna sila: 150 ton / 1500 kN Dolžina poti odpiranja: 450 mm Največja razdalja med ploščami: 700-1000 mm Minimalna višina vgradnje orodja: 250-550 mm Pot izmetnika: 175 mm / Sila izmetnika: 40 kN Teža: 7000 kg Dodatna oprema • Obradba termoplastov • Cilinder s posebno odporno oblogo • Odprta šoba 400 mm vključno z grelnim pasom • Ravna konica šobe • Gibanje šobe s servo krmiljenjem • Električni priključek za zapiralno šobo z iglo • Nadzor orodja za varnost izmetne plošče • Zaščitna naprava, odprta navzgor • Avtomatsko centralno mazanje • Volumski pretok za hidravlične vlečne mehanizme: 60 l/min • 2 x krmilnik za vlečni mehanizem • 2 x izpihovanje • Električna nastavitev višine forme • Hladilna voda s 6 ločenimi krogi • Programirljivi hladilni krogi stroja • Transportni trak, električno programirljiv • Enota za selekcijo: dobro/slabo • Pnevmatska servisna enota • Paketi opreme • Razširjena gibanja: • Povečanje števila stopenj gibanja in vmesnih funkcij ustavljanja • Nadzor proizvodnje: • Nadzor proizvodnje s krmiljenjem željene temperature in programirljivimi alarmnimi cikli. Optimizacija/pomoč pri upravljanju: za prilagoditev stroja individualnim operativnim potrebam • Zagotavljanje kakovosti: • Razširjeno serijsko nadzorovanje kakovosti in dokumentacija: • Možnosti analize procesa • Dokumentacija s protokolom dejanskih vrednosti • Pospeševanje (vklop grelnih šob z zvišanjem temperature) - taljenje brez upora • Prostor za konfiguriranje nastavitev vklopa (nastavitev ciklov z drugimi parametri namesto proizvodnih parametrov) • Kombinacija vtičnic: 1 x CEE in 1 x Schuko • Razdelilnik vtičnic: (3 x CEE in 3 x Schuko) • 12 x električni krog nadzora gretja, vsak po 2 kW (230 V) • Povečana moč krogov nadzora gretja 1-6 na 3,5 kW / 230 V • Povezani sistemi (CPU Ethernet, pripravljen za 4. servis - oddaljeno vzdrževanje) • Vmesnik za robota, standard Euromap 67 • Vmesnik za barvanje • Multigrip Select / prečni nosilec, nosilna teža 6 kg 3 CNC osi, sočasno upravljane / vključno s pnevmatskim ventilom / vakuumsko opremo in osjo C (preklopna os), pnevmatska Os X, Y in Z, servo električni pogoni z-1400 mm / X-400 mm / y-800 mm / c-pnevmatska preklopna os 0-90° 13 Nm / teža 1,2 kg z dodatno opremo Os X podaljšana na 600 mm / Os Y na 1000 mm / os C z nadzorom končnih položajev Povečana prehodna višina za 200 mm Dwjdpfxjzn Av Ie Aflsa • Transportni trak • Zaščitna ograja • 8 prosto programirljivih vhodov • 1 vmesnik z 4 prosto programirljivimi vhodi in izhodi Stroj je v odličnem stanju in ga je mogoče pregledati pri vklopljenem napajanju. Iz trenutne proizvodnje Stroj je na voljo v našem skladišču. brezplačno natovorjen na tovornjak kupca ali brezplačna dostava do vrat, stroški prevoza se povrnejo:

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1,0 rabljeni stroj za brizgano oblikovanje Proizvajalec: KRAUSS MAFFEI Tip: KM500-4300CX Letnik: 2010 Sila zapiranja: 500 ton Razmak med nosilcema: 900 x 900 mm Premer vijačnega valja: 90 mm Maksimalna prostornina vijačnega valja: 2.290 cm³ Masa brizganega izdelka: 1.777 g/ciklus Krmilnik: MC5 Oprema: 2 izvlečna sistema Robot Wittmann Dodpfx Ajx Tbfueflewa 12-kanalni sistem za regulacijo temperature Povezava z napravami za uravnavanje temperature

Stanje: rabljeno, Leto izdelave: 2015, Lot sestavlja: (1) Stroj za brizganje, rokovanje: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Regulacija temperature: HB Therm | Razno: 1x zaščitni ovoj 1x rokovalni sistem 1x transportni trak Tehnične specifikacije: Maks. hod (mm): 175,0 Dwjdpfxjy N R N Uo Aflea Merilni sistem: inkrementalni enkoder Sistem za vpenjanje: kolenčasta ročica (KH) Vpenjalna sila (kN): 1000 Servo za brizganje: ne Premer polža (mm): 40,0 Hitrost polža (vrt/min): 420 Ogrevalne cone: 4 Moč ogrevanja cona 1 (kW): 4,23 Moč ogrevanja cona 2 (kW): 3,00 Moč ogrevanja cona 3 (kW): 3,00 Moč ogrevanja cona 4 (kW): 3,00 Regulacija temperature: termočlen tip J Tip tipala tlaka: membrana

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Dwedpsy N R Iqofx Afloa Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Stanje: rabljeno, Leto izdelave: 2017, Sklop vključuje: Dwjdpey N R I Dsfx Aflja (1) Stroj za brizganje, Ravnanje: Wittmann | W842PRO-0111 | 2017 Temperaturni regulator: HB Therm | HB-100 Z1 | 2017 Sušilec: Somos | RDM 100 | 2021 Razno: 1x transportni trak Tehnične podrobnosti: Napetost napajanja (V): 400 Frekvenca (Hz): 50 Teža (t): 26,8

Stanje: rabljeno, Leto izdelave: 2015, (1) Stroj za brizganje plastike, rokovanje: Wittmann | W833-0747 | 2014 Kontrola temperature: HB Therm | Sušilnik: Somos | RDX27 | 2015 Razno: 1x Zaščitna ograja 1x Pomožna enota, podjetje Ferromatik Milacron Djdpfx Aey N R Tmsflewa 1x Avtomatizacija, podjetje Wittmann + Transportni trakovi, podjetje Frasch Tehnični podatki: Napetost napajanja (V): 400 Frekvenca (Hz): 50 Približna teža (t): 10,1 + 0,6

Stanje: rabljeno, Leto izdelave: 2000, (1) Brizgalni stroj, rokovanje: Wittmann | WX142-0325 | 2023 Razno: 1x zaščitni pokrov 1x rokovalni sistem, podjetje Wittmann, serija 9 1x transportni trak z možnostjo menjave zabojev 1x V2A drč za izmet 1x Euromap 12/67 predelava 1x zunanji sistem vročih kanalov, podjetje Mold Masters M1-06-12 (leto izdelave 2016), 12 con 1x transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 196 Tok 2 (A): 110 Tok 3 (A): 86 Tok 4 (A): 67 Teža (t): 9,7 Dsdpoy N R Uqjfx Afljwa Tlak (bar): 190 Pretok (l/min): 190

Stanje: rabljeno, Leto izdelave: 2003, (1) Stroj za brizganje plastike, Ravnanje: Sepro Robotique | Success 7 | 2016 Nadzor temperature: HB Therm | Razno: 1x Zaščitni ohišje 1x Transportni trak, podjetje RAU Maschinenbau 1x Regulator vročih kanalov 1x Transportni trak, podjetje SAS Grillet 1x Transportna enota, podjetje Motan Tehnične podrobnosti: Velikost stroja: 500/370-200 Napajanje: 3/N/PE AC 400 V Frekvenca (Hz): 50 Tok (A): 94 Dwjdey N R U Ropfx Aflja Teža (t): 3,3 Tlak (bar): 210 Pretok (l/min): 130