Stroj za brizganje

KraussMaffei KM500-4300CX

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Pressing force: 320 t (also available in various other configurations!) Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Bwsdpfx Aeuf Nr Asgtel Clear gap between uprights: 2555 mm Machine length: 3785 mm Machine width: 2290 mm Width without support arms: 1740 mm Total height: 3100 mm Table height: 920 mm Motor power: 22 kW Oil tank capacity: 300 l Machine weight: 14450 kg (Data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double guided press beam, robust and precise - Robust backgauge, double guided - Double-guided backgauge fingers on linear rails - Movable front supports with height adjustment - Side and rear safety guards - Lower die adapter rail 60mm - Manual upper tool clamping system (Promecam system) - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Additional equipment: - Delem DA 66t CNC control - CNC controlled R-axis backgauge - CNC controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (total 4) - 1 set of upper and lower tools - Other bending lengths and capacities available with appropriate accessories! -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Bodpfx Agova H Amotewl Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Bedpfowy U E Usx Agtjwl Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 6.200 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4.200 kN, premer vijaka: 75 mm, Krauss-Maffei KM 420-2000 CX Injection moulding machine from Krauss-Maffei with a 420-tonne clamping force. Only 6,000 operating hours in automatic mode. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras include: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The injection moulding machine is delivered REFURBISHED by the UK Transitus technical expert team. Commissioning at customer facilities can be offered, ensuring machine functionality upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ INJECTION WEIGHT: 1126 g MAXIMUM DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOULD THICKNESS: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282 Bsdpfswq D Efex Agtowl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Bwedpfx Ageikfmhotel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Stock no. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control type: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping Unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen size (H x V): 1,704 x 1,700 mm Clear distance (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Bodpfxsub S R Hs Agtowl Minimum mold installation height: 600 mm Maximum opening width: 1,750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 226 kN Injection Unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Stroke volume: 6,172 ccm Shot weight (PS): 5,617 g Injection flow rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing throughput: 238 g/s Nozzle contact force: 246 kN Electrohydraulic Equipment: Pump motor rated power: 132 kW Installed heating capacity: 70 kW Cylinder heating control zones: 7 Dimensions and Weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Total weight: 43,000 kg Accessories: - Vibration damping elements Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on BFAP - 2 x hydraulic core pulls on FFAP - 8 x hot runner controllers - Robot interface according to Euromap 67

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Bodpfx Agsxirqqetewl Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), A large-format Krauss-Maffei injection molding machine without robot, conveying equipment, safety enclosure, or attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Overall system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83,000kg, operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected to be available from Q1/2026. Bedpfxewut Hyo Agtswl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, WITTMANN BATTENFELD Injection Moulding Machine TM 400/3400 Control System: UNILOG B6P Year of manufacture: 2015 Total operating hours: 33,756 ServoPower SO Package: Variable-speed servo drive for the hydraulic pump, designed to increase energy efficiency and reduce cycle times in accordance with EUROMAP 60 Cycle II and Cycle III standards. _____ Injection unit technical specifications: • Screw diameter: 85 mm • L/D ratio (length-to-diameter): 22 Bwedpfx Agewqd Tcstel • Specific injection pressure: 1,574 bar • Calculated injection volume: 2,128 cm³ • Max. injection weight (PS): 1,936.4 g _____ Clamping unit technical specifications: • Clamping force: 4,000 kN • Clear space between tie bars: 710 × 710 mm (W × H) • Minimum mould height: 300 mm • Maximum platen distance: 1,380 mm • Opening stroke: 670 mm

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), Display – Demag Year of manufacture: approx. 2003 Bedpfxohi Ttne Agtswl