Pulsotronic Pulsotronic Magnetni Separator nakup rabljenega (6.384)

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 51E361-010-02, IFE tehnologija predelave Letnik 2008 Fodpfxoxztbhs Aprspk Na prodaj sta 2 enaka sita, vsak z 2 nezbirnimi motorji Cena je za 1 sito

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna Fpjdpechuvrefx Aprek

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Fpjdpsdubpuofx Aprjk Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (Shipping €14.90 net) *Please refer to image 2 for construction lengths The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the reverse for mounting *Handle available on request The block magnet systems can be used up to a maximum operating temperature of +100°C. The magnet surface should be cleaned regularly of captured iron parts. Attraction heights for all types, e.g.: Fpedotqfhxopfx Aprek For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Mounting Example 1: Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface. Mounting Example 2: Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible. Installation and safety instructions: When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby. The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.

Stanje: dober (rabljeno), Approx. 490 compartment dividers (freestanding) for 80 cm shelf racks, SSI Schäfer – used – : Price per unit ex location: €2.50 (net) dismantled, packed, and loaded! Manufacturer: SSI Schäfer Model: TRF-D 4817 G Fpsdpfx Ajki Tmrjprok Year of manufacture: unknown Height: approx. 17 cm Depth: approx. 76 cm – suitable for shelf depth 80 cm Galvanised Original price: approx. €8 Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Stanje: dober (rabljeno), Approx. 200 free-standing shelf dividers for shelf racking type 2510, SSI Schäfer – used – : Price per item ex location: €2 (net) dismantled, packed and loaded! Fsdskhd Uiopfx Aprjpk Manufacturer: SSI Schäfer Type: TRF 25 10 Year of manufacture: unknown galvanized Original price: approx. €5 Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 7 h, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.620 mm, skupna dolžina: 1.760 mm, skupna širina: 700 mm, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja: 285 l, vhodna napetost: 400 V, največja hitrost vrtenja: 2.850 obr/min, vhodna frekvenca: 50 Hz, kapaciteta rezervoarja za vodo: 440 l, Naprava za čiščenje in recirkulacijo tehnološke vode Z 800K HA TURBO FLOC – leto 2024 | Stanje skoraj kot novo Na prodaj je profesionalna naprava za čiščenje in recirkulacijo tehnološke vode Z 800K HA TURBO FLOC. Sistem je bil izdelan leta 2024 in je v uporabi le 7 ur, kar pomeni, da je praktično nov. Naprava je namenjena učinkovitemu čiščenju industrijske odpadne vode ter ponovni uporabi procesne vode. S pomočjo centrifuge in flokulacijskega sistema Turbo-Floc bistveno zmanjšuje porabo vode ter obratovalne stroške obrata. Tehnični podatki: - zmogljivost čiščenja do 1200 l/h, - dimenzije sistema: 1760 × 700 × 1620 mm, - dimenzije centrifuge: 995 × 680 × 580 mm, - hitrost vrtenja bobna: 2850 obr./min, - barvanje RAL 7035, - avtomatsko odstranjevanje vode iz centrifuge med zaviranjem, - poliuretanski koš za mulj, - elektromagnetni varnostni ventil. Fedpfx Apezcybrerspk Buffer rezervoar (285 l): - iz HDPE materiala, - opremljen s sistemom Turbo-Floc za avtomatsko doziranje koagulanta ali flokulanta, - dodatni filter na dovodu industrijske vode, - dva plovca za regulacijo nivoja tekočine, - impulzno napajanje s črpalko P-3. Rezervoar za čisto vodo (440 l): - iz polietilena HDPE, - dovaja procesno očiščeno vodo napravam, - opremljen z zmogljivo membransko črpalko P9: - zmogljivost 7,8 m³/h, - delovni tlak 4 bare, - nadzor nivoja vode. Sistem za nadzor in upravljanje: - kontrola polnjenja in menjave koša za mulj, - časovni rele in svetlobna signalizacija (opozorilna luč), - PLC krmilnik E60-420, - napetost napajanja 400 V / 50 Hz, - krmilna napetost 24 V DC, - stopnja zaščite IP54, - delovna temperatura od +5°C do +40°C, - varovalo, ki preprečuje zagon centrifuge brez predhodnega odpiranja in ponovnega zapiranja pokrova. Dodatna oprema: - dozirna črpalka DP1 za dovajanje koagulanta, - dozirna zmogljivost 0–1 l/h, - flokulacijsko mešalo Turbo-Floc z mešalnimi lopaticami na obeh straneh diagonale, - posebne stožčaste usmerjevalne plošče iz nerjavečega jekla, vgrajene znotraj centrifuge. Naprava je v odličnem tehničnem in vizualnem stanju. Idealna rešitev za industrijske obrate z vibracijskimi postopki, kjer je potrebno učinkovito čiščenje in ponovna uporaba tehnološke vode. Leto proizvodnje: 2024 Delovne ure: 7 Za podrobnejše informacije in dogovor za predstavitev naprave vas vabimo, da nas kontaktirate.

Stanje: rabljeno, Leto izdelave: 2014, Kersting Belt Conveyor, Conveyor Belt, Separator, Ejector, Placer GF 2880-510-400 Fpsdpfxjwkbfvo Aprsk RA2409 Technical data: Conveyor length (NL): 2880 mm Frame width (NB): 510 mm Belt width (GuB): 400 mm Height (BH): 780 mm infeed and 640 mm discharge Support legs: included Conveying speed (v m/s): Frequency inverter for stepless speed adjustment Drive: Drum motor Electrical data: 50Hz V380-500, kW 0.55 S1 Drive drum: Ø = 100 mm Return roller: Ø = 100 mm Package dimensions: (max 550) x (390...420) x (max 200) LxWxH Control and pneumatics included Food-grade with stainless steel design Optional available: Length adjustment (longer/shorter) Prices excl. VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to support you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Leto izdelave: 2026, stanje: novo, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and various other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all required machinery from us. Just ask! Fodpfx Apjqvmpfjrjpk With Josan & Söhne Maschinenbau Profit from copper recycling! ‼️We are happy to demonstrate the machines to you live in Heilbronn! By appointment only‼️ We are a German company based in Heilbronn — German laws, warranty, and service! We also speak English! We are happy to advise you on all recycling-related matters! Material separation solutions for all areas of recycling – just ask. Electrostatic separator for separating plastics from copper, iron, or other materials. You can also separate plastics from metals in uPVC windows. Separate plastics from sand or different types of plastics from each other. ➡️Motor: 6.59 kW ➡️Dimensions (LxWxH): 4000x1400x3000 mm ➡️Weight: approx. 1,000 kg ➡️Throughput: 150–300 kg per hour Price on request! Errors excepted Images, prices, and equipment details may vary.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.610 mm, skupna širina: 1.040 mm, skupna višina: 350 mm, skupna masa: 723 kg, moč: 2,2 kW (2,99 KM), vhodna napetost: 400 V, širina traku: 650 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, Uporabe in prednosti za stranke: SortMagnet CB omogoča učinkovito odstranjevanje feromagnetnih nečistoč (vijaki, orodje, feritni deli) iz pretočnih tokov razsutega materiala. Povečuje zanesljivost procesov, ščiti nadaljnjo opremo in zmanjšuje drage izpade v industrijah recikliranja, rudarstva, gradbeništva in predelave materiala. Ključne lastnosti: • Neprekinjeno ločevanje nad transporterjem z močnim permanentnim magnetom • Zanesljivo odstranjevanje železnih nečistoč iz toka razsutega materiala • Robustna, nizko vzdrževalna zasnova za dolgo življenjsko dobo Fpsdsxcm Haepfx Aprok • Enostavna integracija nad obstoječe transporterje Tehnične značilnosti: Dolžina 1610 mm · Širina 1040 mm · Višina 350 mm · Širina traku 0,65 m · Pogonska moč 400V / 2,2 kW · Hitrost traku: 1,1 m/s · Teža 723 kg · Permanentni magnet

Leto izdelave: 2002, stanje: rabljeno, Width 395 mm Length 2960 mm Fpedped Srxzsfx Aprek Discharge height 130 mm Usable width 385 mm Pole center distance 400 mm Drive motor: three-phase current Linear magnetic conveyor with permanent magnets.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, Opis Skupina za ločevanje trdnih in tekočih snovi, ki temelji na centrifugalnem sejalniku (Centri-Sifter): trdne snovi se s pomočjo vijačne lopatice pomikajo vzdolž koša/sita, medtem ko se tekočina loči in odvaja skozi namenski iztok. Naklon je nastavljiv za optimalno nastavitev časa zadrževanja in učinkovitosti ločevanja. Prodaja se skupaj s 1000 L zalogovnikom in fleksibilnim polžnim transporterjem. Stanje kot novo (uporabljeno le za testiranje), delujoče in takoj na voljo. Glavna oprema – Centri-Sifter • Tip: centrifugalni sejalnik (iztok za tekočino + iztok za trdne delce) • Izvedba: inox 304 • Koš/sito: wedge wire koš (inox 304) • Lopatice: “expanded 7,5°” (inox 304) • Varnost: pregledna vrata z varnostnim blokiranjem (varnost operaterja) • Teža (stroj): ≈ 220 kg • Čist zrak/plin za zapore: potreben čist/suh/filtriran zrak/plin Fsdpfx Aezc H H Iopropk Motor (motorna plošča) • Motor 3~: 2,2 kW, 50 Hz, 230 V Δ / 400 V Y • Hitrost: 1450 obr/min (50 Hz) • Zaščita / izkoristek: IP55, IE3 • Montaža: IM B35, način delovanja S1 Vključena oprema (v prodaji skupaj) 1) Zalogovnik (hopper) • Volumen: 1000 L • Inox 304, odprta izvedba, "food grade" (Type C Plus) • Nivojske sonde: zgoraj + spodaj • Iztok 30° 2) Fleksibilni polžni transporter • Dobavitelj: Spiroflow Ltd • Model: 146SH • Dolžina/naklon: 3 m 30° • Iztok: Ø300, 30° standard • Elementi: reverse bung / drop trap / QR prirobnice (hitro sestavljanje/razstavljanje) Cena in pogoji • Razpoložljivost: takoj • Lokacija: Martigny (Švica) • Stanje: kot novo, delujoče • Ogled / pregled: po dogovoru Prevozni stroški bremenijo kupca.

Stanje: rabljeno, Leto izdelave: 2022, Separator PCB Fpjdpfxjx U R S To Aprek Aurotec AUO 3000C Industrijski sesalnik Aurotec YSF-V553

Stanje: dober (rabljeno), Approx. 900 shelf dividers (continuous) for 30cm deep shelving – used –: Price per unit ex location: €2.50 (net) dismantled, packed, and loaded! Manufacturer: SSI Schäfer Model: likely TR 3330 Year of manufacture: unknown Height: approx. 33cm Height incl. mounting tabs: approx. 36cm Depth: approx. 26cm – suitable for shelves with a depth of 30cm Galvanized Original price: approx. €7 Fpsdpoki Tq Isfx Aprsk Condition: good Available: immediately Location: warehouse in Frankenberg (Saxony)

Stanje: rabljeno, Naprava za ločevanje olja in vode KAESER BEKO tip Öwamat Premer rezervoarja: 600 mm Skupna višina: 1200 mm Fjdpfxsy Ty Saj Aprjpk z aktivnim ogljikovim filtrom Potrebni prostor: Ø 700 x 1200 mm Lastna teža: cca 30 kg dobro stanje

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, EIMA FOOD PROCESSING MACHINES | Rotacijski bobnasti separator / sita Proizvajalec: EIMA Engineering Serijska številka: 2050039 Leto izdelave: 2020 Premer bobna: 1000 mm Dolžina bobna: 2400 mm Dimenzije: 3200 x 1600 x 2850 mm Fsdszczt Aepfx Apropk Profesionalni, velikogabaritni bobnasti separator (rotacijsko sito) nemškega vodilnega proizvajalca procesne opreme EIMA Engineering. Naprava je ključna komponenta v tehnoloških linijah živilskopredelovalne industrije, zlasti za predelavo sadja in zelenjave. Stroj je namenjen za neprekinjeno mehansko ločevanje trdnih in tekočih frakcij, kalibracijo surovin, čiščenje procesne vode od ostankov ali natančno odcejanje izdelkov po pranju in blanširanju. Srce stroja je zmogljiv perforiran boben, izdelan iz visokokakovostnega nerjavečega in kislinoodpornega jekla, z impresivnim premerom 1000 mm in delovno dolžino 2400 mm. Ta delovna geometrija zagotavlja izjemno površinsko in urni zmogljivost, preprečuje zamašitve tudi pri nenadnih izpustih surovin. Rotacijski način dela omogoča konstantno in nežno mešanje obdelovanega materiala, kar optimizira proces odcejanja in ločevanja brez tveganja mehanskih poškodb občutljivih živilskih izdelkov.

Stanje: rabljeno, Parker Hiross sušač za komprimovani vazduh za kompresorske sisteme Mehanički separator kondenzata, separator vode Hladni sušač sa vodenohlađenim naknadnim hladnjakom za uklanjanje vodene pare i hlađenje komprimovanog vazduha ili gasova. Fjdpfsdzqn Uex Apropk 1 komad naknadni hladnjak tip WFN009 DHH16 Protok vazduha (normalno): 540 m3/h = 9000 litara/min. Radni pritisak vazduha: max. 16 bar Dužina kućišta: 1020 mm Prečnik kućišta: Ø 105 mm Navojni priključak za vazduh: G 2" Navojni priključak za vodu: G 3/4" Težina naknadnog hladnjaka: 11 kg Dimenzije naknadnog hladnjaka (D x Š x V): 1030 x 850 x 200 mm + 1 komad separator vode tip CSP 008 Protok (normalno): 480 m3/h = 8000 litara/min. Radni pritisak: max. 16 bar Navojni priključak: G 2" - Kućište filtera od aluminijuma + 1 komad mehanički separator kondenzata HIROSS SAC 120 Navojni priključci: R 1/2" Radni pritisak: 16 bar Zapremina: 0,8 litara - radi bez gubitka komprimovanog vazduha sve montirano kao što se vidi na slikama Visina montaže u stojećem položaju: 2000 mm Ukupna težina oko 40 kg

Stanje: rabljeno, Leto izdelave: 2023, model krmilnika: , Opis: Tehnični podatki: Število vrtljajev (brezstopenjsko): 0–3.300 min⁻¹ Fpodpfx Apsyz Hr Nersk Obremenitev koša (maks.): 8 kg Oprema/Dodatki: Čiščenje delov: Denios pralna kad Ostali dodatki: različna obratovalna sredstva

Stanje: rabljeno, Slat band magnetic conveyor, magnetic slat conveyor DGS System GmbH Z-conveyor, slat band system, conveyor belt, magnetic conveyor belt Model No.: MBF 326P31.75 Commission No.: 44489-10 Year of manufacture: 2017 Slat band width: 300 mm Distance between permanent magnets: 250 mm Insertion length: approx. 3400 mm (up to extension box) Insertion length: approx. 3900 mm (without extension box) Insertion height: 210 mm Insertion width (housing): 370 mm Insertion width (threaded mountings for support feet): 410 mm Fpjdpfxei Huzxe Aprjk Insertion width at extension box: 470 mm Conveying/emission height: approx. 1040 mm Conveying speed: approx. 2 meters/min. Drive motor power (belt drive): 0.37 kW Power supply: 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Required space (L x W x H): 5200 x 700 x 1500 mm Weight: 410 kg Very good condition

Stanje: novo, Condition new Delivery time approx. 2-4 weeks from order Country of origin: Poland Price: €1,595 Drilling capacity in structural steel: 23 mm Shank: 19 mm Weldon Motor power: 1.6 kW Thread-cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 500 mm Weight: 17 kg Maximum drilling capacity: 23 mm Maximum annular cutter capacity: 50 mm Maximum cutting depth: 75 mm Stroke: 190 mm Motor speed: 160-250 / 390-580 rpm Minimum workpiece thickness: 8 mm The PRO-52T magnetic drill is designed for hole cutting and thread cutting operations. Its powerful motor with variable speed enables milling up to 50 mm and drilling up to 23 mm. Both forward and reverse operation, together with the new Promotech threading system, allow thread cutting up to M20. The two-speed gearbox with stepless speed adjustment enables optimal speed settings based on diameter, steel grade, or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. The innovative 360-degree LED indicator assists with proper machine operation and enhances workplace safety. Features and Benefits: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains consistent speed regardless of load changes • Capable of tapping through and blind holes • Milling with carbide or HSS cutters, or drilling • Electronic clutch • Overload and overheat protection • Rigid construction extends tool life • Tilt sensor stops the motor if the machine tips • 360-degree status monitoring system displays the drill’s condition and provides safety and diagnostic information, e.g. worn brushes • Innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) ensures maximum holding force on thin materials • Energy Saving Base (ESB) consumes only 50% power when the motor is idle • Semi-automatic wedge adjustment allows easy, quick, precise and reproducible guidance setting without specialist knowledge or experience • Intuitive control panel at the top of the drill • Large coolant tank Standard delivery set: • Drilling machine • Plastic case • Handles (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder Fedpfx Aoyrht Ijprepk • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 6 mm Allen key • 5 mm Allen key with handle • 2.5 mm Allen key • 8 mm open-end wrench • Tool box • User manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 ltr Vacuum pad Pneumatic ejector Pipe fastening

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in structural steel: 12 mm Spindle mount: 19 mm Weldon Motor output: 0.4 kW Fsdpfxjyrhtno Aprspk Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm This special battery-powered magnetic base drilling machine is designed for use in remote locations where no mains power is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that displays signals in green and red to indicate the current status of the drill and provide safety notifications. This machine can be used on convex (minimum diameter – 80 mm) and concave (minimum diameter 1000 mm) materials. With the PRO-36 PM Battery equipped with the CAS LiHD 10.0 Ah battery pack, up to 47 holes (D=20 mm) can be drilled in 10 mm steel plates. Features and benefits: • LED monitoring system flashes green when insufficient adhesion is detected, for example due to a gap or workpieces that are too thin • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor in the event of machine failure or magnetic detachment • Control panel is fitted with so-called "vandalism-proof" illuminated motor start/stop buttons Standard delivery set: • Cordless drill with cooling system • Plastic case • 4.0 Ah battery • Handle (3 pieces) • Safety strap • 4 mm Allen key with handle • Operating instructions OPTIONS (PRICES ON REQUEST): Charger Pressurised cooling system Vacuum pad Vacuum pump Pneumatic ejector

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,695 Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.45 kW Length: 316 mm Width: 235 mm Height: 328 mm Weight: 11.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm The PRO-36 Battery is a magnetic drilling machine designed for drilling holes up to 36 mm in diameter using annular cutters. The machine can also drill holes of up to 12 mm in diameter when using twist drills. The cordless drilling machine is equipped with an LED monitoring system that displays signals in green and red to indicate the current machine status and provide safety information. The control panel features “vandal-resistant” illuminated start/stop switches (green/red). Features and benefits: • LED monitoring system indicates the current machine status and provides safety information • The LED monitoring system flashes green if insufficient adhesion is detected, e.g. caused by a gap or workpieces that are too thin • The double guide system ensures exceptional precision and maintenance-free operation • Overload protection • Magnetic field sensor automatically stops the motor when holding force is insufficient • Magnetic Field Shape Control (MFSC) provides maximum holding strength, even on thin materials • The Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running • Innovative intelligent magnet with reduced weight Standard delivery package: • Cordless drilling machine • Plastic case • 4.0 Ah battery • Handle (3 pcs) • Safety strap • Cooling system • 4 mm Allen key with handle • User manual Fpsdeyrhqtjpfx Aprjk OPTIONS (PRICES ON REQUEST): • Charger • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Price: €1,445 Holder: 19 mm Weldon Motor output: 1 kW Length: 307 mm Width: 221 mm Height: 317 mm Weight: 13.5 kg Max. core drilling capacity: 36 mm Max. cutting depth: 51 mm Stroke: 70 mm Motor speed: 350 rpm Min. workpiece thickness: 6 mm The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current status of the drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation in automatic mode. The drill control continuously selects the most effective operating conditions based on the relationship between motor load, feed rate, and the permissible cutting parameter range for the specific tool type and bore diameter. This results in longer tool life for HSS and TCT cutters and improved machine performance. Countersinking and machining thin workpieces is only possible in manual mode when clamping force is insufficient (blinking green LED). A safety strap protects the machine from falling in the event of a loss of magnetic hold. Features and benefits: • LED monitoring system displays the current status of the drill and provides safety and diagnostic data. • The LED system blinks green if inadequate adhesion is detected, such as with gaps or thin workpieces. • Auto Feed Smart Drive optimizes milling parameters for each tool, depending on type (HSS or TCT) and hole diameter from 12 mm to 36 mm, significantly extending tool life. • The tilt sensor stops the motor if the machine tips. Fedpfx Aoyrhppsprspk • Dual-rod guide system ensures exceptional rigidity and backlash-free operation. • Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials. • Automatic feed control stops the machine as soon as the cutter passes through the workpiece. • Protection against automatic restart after power failure. • Compact, robust design with ultra-lightweight construction (13.5 kg). Standard scope of delivery: • Drill • Metal case • Safety strap • Coolant tank • Chip guard • 4 mm Allen key • Operating manual

Leto izdelave: 2016, stanje: rabljeno, Kovinski separatorji, 3 kosi, blagovne znamke Sesotec so naprodaj. Naši GF detektorji kovin za pnevmatske aplikacije nudijo optimalno zaščito pred proizvodnimi zastoji, prekinitvami in reklamacijami strank. Primerno za jeklo, baker, neželezne kovine, nerjavno jeklo (VA). Fpedjyrl Nyepfx Aprjk CENA velja za kos .....1750€

Stanje: novo, Leto izdelave: 2026, skupna masa: 700 kg, moč: 17 kW (23,11 KM), Separatorji Mizar Zig-Zag so zasnovani za učinkovito ločevanje lahkih in težkih materialov z uporabo zračnega cik-cak pretoka. Ta napredna tehnologija zagotavlja visoko natančnost ločevanja materialov, zaradi česar je idealna za recikliranje plastike, kovin in kompozitov. ✅ Učinkovita tehnologija pretoka zraka – Učinkovito ločuje materiale na podlagi teže in gostote. ✅ Visoka natančnost in doslednost – Zagotavlja natančno sortiranje za optimalne rezultate recikliranja. ✅ Energijsko učinkoviti in vzdržljivi – Namenjeni za dolgotrajno industrijsko uporabo. ✅ Enostavna integracija – Združljivo z obstoječimi reciklažnimi sistemi. 🔸 Tehnične specifikacije 🔹 ZZS M1 Moč: 17 kW Dolžina: 2000 mm Širina: 1250 mm Fpodpfjv Hm I Njx Aprok Višina: 4180 mm Teža: 700 kg