Magnetni vibracijski polirni stroj

Forplan Ergomag PM 3000

Stanje: novo, Leto izdelave: 2025, * 250 L neto prostornina * Dovajalna (dozirna) črpalka vključena * Visoko odporna poliuretanska obloga (90 Shore) Bljdpfxoh I N Udo Ahneh * Visokozmogljiv trifazni pogonski motor * Zamenljiv ventil za izpust odpadne vode * Glavno stikalo in stikalo za zasilno zaustavitev * Časovnik in števec delovnih ur * Posebna izvedba krmilne omare (v skladu z EU standardi) vključena

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber Bsdpfxjg Rxhgj Ahnjlh With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line.

Stanje: rabljeno, Leto izdelave: 2020, številka stroja/vozila: 031EP-2020, Ref. No. 24558 Technical Data: Bodjvazz Depfx Ahnslh - Abrasive diameter: 150 mm - Grinding unit can be swiveled on articulated arm - Swivel radius of grinding arm: 2,000 mm - Motorized dust extraction - Disc speed steplessly adjustable: 800 – 2,200 rpm - Table dimensions: 1,500 x 880 mm - Table height approx.: 920 mm - Drive: 400 V / 3.6 kW - Space requirement approx.: W 1,600 x H 1,600 x D 1,600 mm - Weight approx.: 250 kg

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new Bedpfom Rpy Rex Ahnslh The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or

Stanje: dober (rabljeno), Trough Vibrator, Vibratory Finishing System, Vibratory Finishing Machine, Vibratory Trough Finisher, Trowalizing System, Continuous Vibrator, Vibratory Conveyor, Oscillating Conveyor -Manufacturer: circlon, round vibratory trowal-vibrator with soundproof hood -Total volume: 230 liters -Type: CLS-230 -Work bowl: elastically mounted -Working bowl width: 250 mm -Outlet: approx. 200 x 260 mm Blodpjiy Ef Asfx Ahnoh -Working bowl height: 510 mm -Features: manual separation flap, stepless motor speed via variator gearbox, liquid connection -Machine for: deburring, polishing, edge rounding -Transport dimensions: 1700/1600/H2240 mm -Total weight: 1150 kg

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated digital XY and angular readouts for precise measurements. The device is equipped with a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision engineering. Contact us for further information on this machine. • Laterally correct image (no mirror inversion) for easy evaluation • 3-position objective turret for rapid magnification selection Bedpfx Aex D I Etehnslh • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary table Type 2 • Maximum workpiece height: 100 mm • Integrated XY and angular digital display for precise readings • Illumination: combination of contour (transmitted light) and vertical (incident light) • Light source: 24 V / 150 W halogen for high-quality projection • 4-position condenser in transmitted light mode with automatic illumination adjustment for magnification • Optics: semi-transparent mirror for clear incident light images; telecentric lenses for distortion-free imaging across the entire field • Focusing via movable optical head (table remains stable to avoid measurement deviations) • Measurement accuracy: contour illumination ±0.1%; tilt/surface illumination ±0.15% • Robust construction with precision-engineered guides; workshop-suitable and easy to operate • Proven Nikon quality, made in Japan • Large projection area, suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision engineering, and sample inspection • Flexible upgradability with digital interfaces or SPC connectivity

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Blsdpfx Aot Tqy Eohnsh Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, used Timesavers model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Transport speed, frequency controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connection: 400 V Frequency: 50 Hz Control voltage: 24 V Total connected load: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Total extraction capacity: Required extraction volume at 100 mm water column: 3,000 m³/h W-unit: Roller unit Contact roller unit, Ø150 mm Contact roller hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W-unit: 15 kW B-unit: Bljdpeyu Tfhefx Ahnoh Brush unit Brush Ø200 mm Oscillation: 110 strokes/min Main drive: 11 kW Total power B-unit: 11 kW Machine configuration according to CE Door switch Emergency stops at the infeed and outfeed sides of the machine Machine weight, unpacked: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Blodpfjhbal Dsx Ahnsh Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Hitrosti vrtenja do: 2250 obr/min Pomikalna hitrost: 0 - 300 mm/min Bljdpeyfgd Eofx Ahnsh Pogonska moč na motor: 2,9 kW Električni priključek: 400 V Teža: 395 kg Zahtevan prostor: 4100 x 1670 x 1450 mm