Stroj za vrtanje cevi

HEBÖ RBV 12

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GL-0313-4995, skupna širina: 1.800 mm, skupna dolžina: 3.900 mm, skupna višina: 1.500 mm, vrsta vhodnega toka: trifazni, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Nudimo mizo za prebojno vrtalno napravo hebö RBV 12 v skoraj novem stanju, letnik 2013. Stroj je popolnoma delujoč, malo rabljen in v stanju kot nov. Optimalen za izdelavo ograj. Rodpfoygcziex Agtst Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm Redpjlgvkiefx Agtot - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Vrtalna zmogljivost v jeklu (premer): 40 mm Razdalja med vretenom in stebrom: 350 mm Hod vretena: 120 mm Vrtalna zmogljivost v litem železu: 60 mm Vpenjalo vretena: MK 4 Izstop vretena: 350 mm Hitrost vretena: 50 - 1450 / 18 stopenj U/min Podajanje: avtomatsko/ročno mm/U Razdalja vreteno/miza max.: 25 - 705 mm Delovna površina mize: 430 x 430 mm Prilagoditev višine vrtalne mize: 680 mm Premer stebra: 150 mm Razdalja od sredine vretena do spodnje plošče: 1210 mm Skupna potrebna moč: 1,6 kW Teža stroja pribl.: 350 kg Mere stroja pribl. DxŠxV: 0,95 x 0,55 x 2,3 m Rodpfx Agoviqybetjt Miza nastavljiva po višini (nagibna in vrtljiva) Miza vrtljiva 45° levo/desno in okoli stebra 360° Navojno rezanje do M24 Hladilni sistem *

Stanje: novo, Leto izdelave: 2026, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Item no. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped in place, and drilled. All you need to do is press the start button. The positioning system’s horizontal gripper allows for easy pneumatic clamping of round tubes, rectangular tubes, angle profiles, as well as flat and solid materials. After simply entering the X-values or recalling a previously saved program, the machine operates completely independently. The Y-axis can be adjusted by the operator via a handwheel with digital display. Benefits • Sequences of holes are drilled automatically at precise intervals. • Operator errors are drastically reduced. • Programming takes only a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Fully automatic version Measuring length: 6,000 mm Total length: 13,500 mm NC single-axis control Pneumatic vice (clamping range 200 mm) Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV (technical data see datasheet) Anti-rotation device Motorized height adjustment Thread cutting device Rjdpefu Itbjfx Agtjt NC Positioning System PD 200p Feed force 200 kg Positioning in absolute or incremental (chain) dimensions possible Carriage with DC servomotor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack and pinion Steel carrier profile as contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting angles / Roller width 407 mm / Insert plates / Reinforcements / Roller diameter 50 mm / Steel rollers We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Redpfx Ajfu Ivzegtst Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 310 kg, Teža: 310 kg Mere: 900x700x1550(v) mm Moč motorja: 3 kW Polna kvadratna palica: 20x20 mm Polna okrogla palica: premer 20 mm Ograjna letev: 60x12 mm Redpex I Rdisfx Agtst

Stanje: novo, Leto izdelave: 2023, Horizontal Bending Machine AH 40 - Manufacturer: ZOPF - With semi-automatic control - NC control unit - Includes bending pin - Includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely adjustable stroke setting - Adjustable working speed Max. working stroke: 10 mm/sec Return speed: 20 mm/sec - Adjustable hydraulic pressure Rjdpeqvm Ukofx Agtst - Max. tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Enclosed work table - Weight: 1000 kg - Bending capacities: Flat material: 150x22 mm Round tube: up to 60 mm

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m Rjdpfed Iin Hjx Agtjt SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... · Adjustable water cooling · Cutting pressure regulator IMPORTANT: Price does NOT include saw blade! (Saw blade price €204)

Stanje: zelo dobro (rabljeno), Motorised welding column 3x3 with movement control via pendant. Rjdpju Afttofx Agtet Usable capacity: 3x3 m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc welding unit with torch and flux hopper + Lincoln NA-3N control panel for Amperage and Voltage regulation. Submerged arc duty cycle: 1000 Amperes at 100%. Idealarc® DC-1000 Submerged Arc Welder Input Voltage: 230/460 V Input Current: 193/96.5 A Input Frequency: 60 Hz Input Phase: 3 Input Power: 230/460/3/60 Mode Icon: CC/CV Output Range: 150-1300A DC, 16-46V Polarity: DC Rated Output: 1000A/44V/100%

Stanje: novo, Digital technology: the NEOPULSE 400 CW is a three-phase pulsed MIG/MAG power source designed for heavy industry applications. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding welding tasks. Its intuitive and functional digital interface allows for easy adjustment of all welding parameters. MULTIPROCESS WELDING MIG/MAG: Rjdpfx Aemxkggogtst - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulose electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).