Odmotovalec Pločevine, Odmotovalec Pločevin, Gsw nakup rabljenega (6.140)

Stanje: rabljeno, Tehnični podatki o izravnalni plošči: Proizvajalec: Bito, tip PRO Primerno za osnovno ploščo L, ki je nameščena na regalnih stojalih P1-P3. Vključen je: 01x Izravnalna plošča, rabljena Barva materiala: sendzimir pocinkana Skupna širina: pribl. 120 mm Skupna globina: pribl. 105 mm Debelina materiala: pribl. 0,5 mm Razdalja med luknjami (sredina - sredina): pribl. 95 mm Teža: pribl. 0,05 kg/kos Vaši kontakti v našem podjetju: G.: Andre Evering Ncodpfxox Tua Se Altjw G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Morebiten prevoz ali pošiljanje izdelka je povezan z dodatnimi stroški, ki jih, glede na lokacijo dostave oziroma obseg dobave, lahko dodatno preverite pri nas.

Stanje: novo, Scope of delivery includes: 01x Lattice Brace, new Manufacturer: Stow Material color: Sendzimir galvanized Profile dimensions: C: 35 x 25 x 7.5 mm Length: approx. 1,035 mm Center-to-center hole: approx. 993 mm Drill hole diameter: approx. 10 mm Weight: approx. 1.07 kg | each Currently available in stock: approx. 900 pcs. Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Ncedpfjtaui Asx Altsw General information about the item: This item is only offered for collection. If transport or shipping is additionally required, this entails extra costs, which can be specifically requested from us depending on the delivery location and scope.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Presejalne mreže in perforirane plošče za sortirne stroje VS Naše visokokakovostne presejalne mreže in perforirane plošče so zasnovane za učinkovito sejanje zemlje, lesnih sekancev, gramoza in gradbenih odpadkov. Vsaka mreža in plošča sta izdelani za dolgo življenjsko dobo, natančnost in enostavno zamenjavo – idealno za modele VS COMPACT, VS MEDI in VS BIG. Specifikacije mrež: • Nadomestna jeklena presejalna mreža • Standardna odprtina: 20x20 mm, kvadratna Nedpfx Aexm S Eijltecw • Debelina žice: Ø3 mm • Primerno za vse velikosti strojev VS • Po meri možne odprtine od 3 do 100 mm Specifikacije perforiranih plošč: • Nadomestna hladno valjana jeklena plošča • Standardna perforacija: Ø20 mm, okrogla • Debelina plošče: 2 mm • Združljivo z vsemi modeli VS • Možnost izdelave perforacij po meri od 3 do 100 mm Za individualne dimenzije mrež ali druge prilagoditve nas kontaktirajte – ponujamo rešitve po meri za vse sortirne stroje serije VS.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta laserja: vlakenski laser, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Format rezanja (mm): 12000*2500 Pomak osi X (mm): 2530 Ncsdpewwz Dxofx Altsw Pomak osi Y (mm): 12050 Pomak osi Z (mm): 120 Maksimalna sintetička brzina pozicioniranja (m/min): 140 Ubrzanje (G): 1,5 Dimenzije glavnog uređaja (mm): 15600*3650*1900 Tlocrtna površina (mm): 16000*5500 Ukupna masa stroja (kg): 12500

Stanje: novo, Leto izdelave: 2024, Stanje novo Letnik 2024 Številka zaloge 9738 Dobava takoj, prodano vmes Država izvora Turčija Cena 20.300 € Leasing rata 389,76 € Na zalogi 1 Dolžina upogibanja 1530 mm Maks. kapaciteta upogibanja - konstrukcijsko jeklo 6 mm Maks. debelina pločevine brez predhodnega upogibanja - konstrukcijsko jeklo 6 mm Ncodowirulopfx Altow Maks. debelina pločevine s predhodnim upogibanjem - konstrukcijsko jeklo 4 mm Premer zgornjega valja 150 mm Moč motorja 4 kW Dolžina 3100 mm Širina 1120 mm Višina 1020 mm Teža 2100 kg 3 valji Asimetrična postavitev valjev - s pred-upogibanjem 2 gnana valja Motorizirana nastavitev stranskega in vpenjalnega valja Digitalni prikaz položaja stranskega in vpenjalnega valja Zgornji valj z možnostjo odklopa naprej Delovanje naprej/nazaj Kaljeni valji Premični upravljalni pult Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI (Simbolna fotografija)

Stanje: novo, Dolžina upogibanja: 2100 Debelina pločevine: 45 Upogib: 35 Premer zgornjega valja: 430 Stranski valj: 390 Motor: 30 Dimenzije (DxŠxV): 5200 x 2200 x 2500 Teža cca: 19000 Tehnični podatki: - Kaljeni in polirani valji Ncedpfx Aleytyy Njtsw - Celotno ohišje iz ST-52 jekla - Naprava za stožčasto krivljenje - Digitalni prikaz za stranske valje - Prenosna kontrolna konzola - Valji so montirani na ležajih - Pokrov zgornjega valja, hidravlično odpiranje in zapiranje preko nadzorne plošče - Vse valje poganja hidravlični motor in planetno gonilo - Stranski premiki poganjani hidravlično

Stanje: novo, Dolžina upogibanja: 4100 Debelina pločevine: 25 Premer zgornjega valja: 460 Motor: 22 Dimenzije (D x Š x V): 7200 x 2500 x 2200 mm Teža pribl.: 31000 Dolžina pločevine: 4100 Tehnični podatki: - Kaljeni in polirani valji - Celotno ohišje iz jekla ST-52 - Konusna naprava za upogibanje - Digitalni prikaz za stranske valje - Prenosna kontrolna plošča - Valji so vgrajeni z ležaji - Zgornja zaščita valjev, hidravlično odpiranje in zapiranje preko upravljalne plošče. - Vsi valji poganjani s hidravličnim motorjem in planetnimi zobniki - Stranske premike poganja hidravlika - Primeren za CE-standard Opcije: - spremenljiva rotacijska hitrost EURO 5.858, -- - Miza za dovod materiala na zahtevo - Oljni hladilnik STD - Sredinska podpora EURO 18.750, -- Nsdpfxsd Ab Spj Altjcw - Stranske opore EURO 15.400, -- Imamo veliko referenc!

Stanje: novo, Dolžina pločevine: 2100 Debelina pločevine: 40 Ukrivljanje: 30 Premer zgornjega valja: 390 Stranski valj: 360 Motor: 22 Ncsdpfxed Ab Syj Altow Dimenzije (DxŠxV): 4900 x 1950 x 2200 Teža približno: 17000 Tehnični podatki: - Kaljeni in polirani valji - Celotno telo iz jekla ST-52 - Konusna upogibna naprava - Digitalni prikaz za stranske valje - Prenosna kontrolna konzola - Valji so montirani z ležaji - Pokrov zgornjih valjev, hidravlično odpiranje in zapiranje preko upravljalne plošče - Vse valje poganja hidravlični motor in planetno gonilo - Stranski premiki so izvedeni hidravlično Opcije: - spremenljiva hitrost rotacije EURO 4.682,-- - Miza za dovajanje materiala na zahtevo - Hladilnik olja EURO 1.040,-- - Podpora v centru EURO 13.600,-- - Stranske podpore EURO 9.250,-- Imamo veliko referenc!

Stanje: novo, Very robust motorized 3-roll plate bending machine Weight: 670 kg Equipped with hardened rolls Roll hardness: HRC 28-32 Minimum sheet thickness: 0.5 mm Maximum sheet thickness: 3 mm Maximum working width: 1,000 mm Pre-bending: 2.5 mm Ncodpsga Tz Aofx Altsw Roll diameter: 95 mm Motor power: 1.5 kW INCLUDES * Hardened rolls * SCHNEIDER electrical components

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Na voljo je precizni stroj za ravnanje pločevine. Širina materiala: 1500 mm, debelina materiala: 1-2 mm, primerno za: aluminij, krmiljenje: Siemens Simatic OP177B. Opremljen s transportnim valjčnim stojalom. Dodatno so na voljo rezervni deli: Siemens krmilna enota 24V DC (6SL3040-1NB00-0AA0), Siemens kompaktni asinhronski motor 15 kW (1PH7133-2DF02-0BA0), Siemens sinhronski servomotor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA valjčne roke. Teža: pribl. 6700 kg, skupne mere X/Y/Z: pribl. 2400 mm/1600 mm/1800 mm. Ogled po dogovoru možen. Ncodpfxoy Uyfvj Altow

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, najv. debelina pločevine: 120 mm, višina obdelovanca (maks.): 120 mm, širina brušenja: 800 mm, The grinding and deburring machine provides an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent results by rounding the edges and removing burrs, leading to a significantly improved surface quality. Utilizing state-of-the-art technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. User-friendly operation combined with a robust design ensures seamless integration into your production processes. Njdpfx Alowzv E Estscw With our grinding and deburring machine, you not only optimize processing times but also increase the precision and durability of your products. Benefit from superior processing quality and boost your efficiency in production.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 800 mm, najv. debelina pločevine: 120 mm, višina obdelovanca (maks.): 120 mm, širina brušenja: 800 mm, The grinding and deburring machine provides an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent results by rounding the edges and removing burrs, leading to a significantly improved surface quality. Utilizing state-of-the-art technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. User-friendly operation combined with a robust design ensures seamless integration into your production processes. With our grinding and deburring machine, you not only optimize processing times but also increase the precision and durability of your products. Benefit from superior processing quality and boost your efficiency in production. Ncsdpfsulauvsx Altow

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Njdpfxjypbque Altocw Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg Njdjypbqnopfx Altscw 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Nsdpfsypbqhox Altjcw Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Nsdpfx Ajypbqbsltocw Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Ncedpfx Ajypbp Rsltsw Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Nsdpsypbp Djfx Altjcw Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg Nedpfxeynmw Rj Altecw WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Condition: New Ncodpfx Aoynmwkjltow Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: novo, Bending length: 2100 mm Sheet thickness: 6 mm Upper roll diameter: 170 mm Technical data: - Rear roll motorized drive - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel Ncsdpfx Aljd Ab Npstew - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electromotors and planetary gears in the gearbox - Portable control console - In compliance with CE standards Options: - Bottom roll driven by electric motor EUR 1,650 - Digital display for rear roll position EUR 1,010 - Extended rolls EUR 966 - Profile rolls EUR 1,190 We have numerous references!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 200 mm, najv. debelina pločevine: 100 mm, skupna dolžina: 1.850 mm, skupna širina: 670 mm, skupna višina: 2.145 mm, skupna masa: 1.090 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, moč: 8 kW (10,88 KM), širina obdelovanca (maks.): 1.200 mm, vhodni tok: 16 A, Ta stroj je bil uporabljen izključno kot testni model in je zato praktično kot nov. Vedno ste dobrodošli, da si ga ogledate v našem razstavnem salonu v Bergeijku. 2024 Stroj za odstranjevanje robov in končno obdelavo F200 XL z vakuumsko podporo. Primeren za odstranjevanje robov, zaobljenje in/ali brušenje jeklenih izsekanih delov do širine 200 mm. Odkrijte napredni finiširni stroj F200 XL. Na tem kompaktnem, a zmogljivem stroju lahko obdelujete vse izdelke od velikosti evrskega kovanca do širine 200 mm. Na vstopni strani se s pomočjo brusne enote odstranijo robovi in nepravilnosti, kar daje gladko in brezrobno površino. Sledi obdelava z dvema nihajnima kombiniranima ščetkama, ki izvajata nežen pritisk. Ščetki zagotavljata enakomerno zaobljene vse robove in luknje – po celotnem konturi in na ploščinah – za optimalno obdelavo izdelka. F200 XL omogoča avtomatsko kalibracijo ščetk, kar zagotavlja konstantno doslednost in natančnost, prav tako je možna popolna ERP-kontrola ter brezhibna integracija v avtomatizirana proizvodna okolja. Skratka, stroj za končno obdelavo, popolnoma pripravljen na prihodnost! Trenutno vam lahko ponudimo ta razstavni F200 XL - VAC stroj letnik 2024, po želji v kompletu z mokrim izsesovalcem WES3000 in pripadajočim cevovodom. Na voljo samo do prodaje. Ncodpfx Aljyt I U Ujtow Stroj je dobavljen z 1-letno garancijo (brez nadomestnih obrabnih delov). Dobava: iz tovarne Bergeijk. Po želji lahko ponudimo tudi dostavo, montažo in usposabljanje vaših operaterjev na lokaciji. Na voljo imamo tudi mlado rabljeni F200 XL stroj z magnetno fiksacijo izdelkov, letnik 2023. Stroj si je možno ogledati v našem razstavnem prostoru na Nizozemskem. Kontaktirajte nas in pripravili vam bomo zanimivo ponudbo.

Leto izdelave: 1999, stanje: dober (rabljeno), Sheet width 500 – 1,600 mm Sheet length max. 4,500 mm Stack weight max. 3 t Stack height (with pallet) max. 500 mm Speed max. 40 m/min. Nodebh Dtwepfx Altjcw

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: Nsdpfx Aed Ab Ngjltecw - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EURO 2,200 - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Ncodpfxod Ab Nqo Altjw Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references!