Stroj za zarezovanje pločevine Hydr.

INDUMASCH, Siegen V 254

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: V 254326, Offer 22407 Technical Specifications: - Cutting length: 250 mm - Cutting angle: 90 ° - Cutting capacity: - Mild steel, up to: 4 mm - Stainless steel, up to: 3 mm - Aluminium, up to: 5 mm - Stroke rate: up to approx. 55 /min - Table size: W 800 x D 800 mm - Working height approx.: 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil capacity: 50 l - Electric foot switch Rsdpfx Afoif Aqveajw - Space requirement approx.: W 800 x H 1250 x D 900 mm - Weight approx.: 700 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 5211, Offer 24289 Technical Data: - Maximum cutting width: 3060 mm - Maximum cutting capacity at 45 Kp/mm²: 4 mm - Cutting angle: 1.50° - Cutting gap adjustment via adjustment screws - Number of hold-downs: 15 pcs - Strokes per minute: 23 to 43 /min Rodpst Ucgaefx Afaew - Front angle gauge - Motorized rear gauge, position-controlled: 15 – 850 mm - Cutting line illumination - Electric foot switch - Drive: 400 V / 7.5 kW - Space requirement: approx. W 3900 x H 1600 x D 2400 mm - Weight: approx. 4.5 t

Leto izdelave: 2008, stanje: dober (rabljeno), številka stroja/vozila: 431808, Ref. No. 18177 Hydraulic Flat, Profile, and Bar Shear with Notching Attachment and Punching Unit Technical Data: - Flat Bar Shear cuts up to 375 x 10 mm or 220 x 20 mm - Profile Steel Shear cuts angle steel (L-profile) at 90° up to 130 x 13 mm - Bar Shear cuts round bar up to 45 mm, square bar up to 45 mm - Notching Attachment with square notching tool 100 x 42 x 10 mm - Punching Unit – Punching force: 600 kN – with stop table – Throat depth: 300 mm – Punches holes in steel up to 28 mm Ø in 15 mm material, or 34 mm Ø in 12 mm material - Manual length stop - Drive: 400 V / 4 kW - Space requirements approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg Rodpfx Afsmidyijasw

Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 0159488169537, Offer 23293 Technical Data: Rjdpfx Afspuy H Doasw - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel 9 mm - or with special punching tool: up to 100 mm Ø in steel 2.5 mm - Stroke adjustable: 0 to 28 mm (stepless) - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - Incl.: - Foot switch - Centre-point finder - Support table with foldable stops W 1100 x D 850 mm - Stop travel from centre of punch - Width between left/right approx. 470 mm x D 510 mm

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1997, najv. debelina jeklene pločevine: 16 mm, dolžina rezanja (maks.): 4.000 mm, HIDRAVLIČNE ŠKARJE LVD MVSB 40/16 Serijska številka 24159 Leto izdelave 1997 TEHNIČNE SPECIFIKACIJE Največja debelina pločevine St45 16 mm Dolžina reza 4050 mm Razdalja med stebri 4250 mm Obseg zadnjega prislona 1000 mm Minimalni rezni kot 0,5 ° Maksimalni rezni kot 2,0 ° Minimalno število gibov/min 7 Maksimalno število gibov/min 26 Minimalna zračnost rezil 0,5 mm Rsdpfxouipu Es Afasw Maksimalna zračnost rezil 1,6 mm Moč motorja 22 kW Približna masa 20500 kg D x Š x V 4800 x 2170 x 2750 mm Priložena oprema: Električna nastavitev zadnjega prislona 1000 mm z Go-to krmilnikom Nastavljiva zračnost rezil in rezni kot 1 x čelna podpora 1500 mm, ena s 90° kotno roko 1 x čelna podpora 1500 mm Nožni pedal

Stanje: novo, Leto izdelave: 2025, Bandwidth: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 strokes/min at full feed length Rjdpfx Afo Ea U Hsaow Feed force: 90 N Available with mechanical control valve by default, or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Leto izdelave: 2007, stanje: dober (rabljeno), številka stroja/vozila: 12641207, Offer 23108 Technical specifications: - Welding current: max. 550 A at 60% duty cycle (ED) - Welding current: 420 A at 100% duty cycle (ED) - Adjustable welding current range: 50 A – 550 A - 3 coarse settings + 12 fine settings Redpfxolzif Se Afajw - Separate wire feed unit with 4 m intermediate hose package - 4-roller wire feed, infinitely adjustable: 0.5 – 24 m/min - 2-stroke + 4-stroke operation selectable - Water-cooled torch package, approx. 4 meters - Ground cable - Pressure regulator - Connection: 400 V / 64 A - Space requirements: approx. W 550 x H 1310 x D 1050 mm - Weight: approx. 150 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Erlo SEAR 25-RS drilling machine, geared-head drill with automatic feed, equipped with tapping system, spindle speeds 64-3060 rpm, comes with drill chuck and safety guard. Machine in very good condition, year 2006. 2 identical units available. Rodpfx Ajv Rnhxsfaew

Stanje: dober (rabljeno), OFFER 70105 Technical Specifications: - Hole diameters approx.: 44, 45, 48, 52, 2 x 55, 2 x 58, 61, 66 mm - 2 x 68, 2 x 80, 81, 85 mm - Oblong hole dimensions approx.: 12 x 42, 12 x 50, 18 x 55 mm - Punch holder: 58 mm - Punch height: 54 + 58 mm - Adapter ring for punch Rodpfx Asg T S Axofajw - Die height: 30 + 40 mm - Die outer diameter: 90 + 140 mm - Adapter ring for dies: 90 - 140 mm - Weight approx.: 90 kg

Stanje: rabljeno, Leto izdelave: 1997, Pressure 130 t Bending length 3060 mm Frame gap 2690 mm Throat depth 410 mm Stroke 365 mm Installation height 535 mm Rjdpfx Aoxacfmofaew Approach speed 200 mm/sec Working speed 1.0 - 10.0 mm/sec Return speed 135 mm/sec Table width 120 mm Table height 1050 mm Tiltable up to +/- 10.0 mm Operating hours approx. 31,800 h Compressed air 5.0 - 7.0 bar Oil capacity 250 l Operating pressure 340 bar Voltage 400 V Total power requirement 23.0 KVA Machine weight approx. 12,950 kg Dimensions (L-W-H) 3660 x 2310 x 2900 mm Machine in well-maintained condition (!!) with only approx. 31,800 operating hours - in inspected condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swivel-mounted control panel, front left * 2D graphical programming & product display * tool & program library * USB interface for keyboard and mouse - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled backgauge (X1 + X2 axis) - CNC controlled height adjustment of the backgauge (R1 + R2 axis) - CNC controlled adjustment of the backgauge fingers (Z1 + Z2 axis) - CNC controlled pneumatic die shifting (I axis) - CNC WILA electro-mechanical crowning system - TRUMPF hydraulic upper tool clamping - TRUMPF manual lower tool clamping - 1x movable 2-hand / foot control - Rear safety guard (sliding door) - Side safety guard (swing door) - original operating instructions + spare parts list