Stroj za okroglo upogibanje pločevine

Rogi PR-1000

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall Codpfjh Etf Rex Am Torc - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv Credpod Eqqqsfx Am Toc • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI DODATNO: kaljeni valji EURO 900,--

Stanje: novo, Leto izdelave: 2023, Sheet width: 1540 mm Sheet thickness: 4 mm Top roller diameter: 110 mm Lower roller diameter: 110 mm Bending roller diameter: 110 mm Crsdpfxsvx Uvxs Am Tec Total power requirement: 1.1 kW Machine weight approx. 0.9 t Space requirement approx. 2.5 x 0.6 x 1.1 m New machine Conical bending device, hardened and ground rollers, motorized bending roller, stationary control panel, digital display for right and left bending rollers, digital display for lower roller

Leto izdelave: 2000, stanje: generalkompletno obnovljen (rabljeno), System for filling, cooling, and sealing suppository casting packs made of plastic. Crsdpsfc I Hasfx Am Tjc The line was completely overhauled mechanically and electronically in 2019 and is as good as new. Before delivery, the system will be tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m Crsdscubatopfx Am Tec - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: skoraj kot novo (rabljeno), GASTI Dogatherm 41 cup filler. Manufacturer – Gasti-Verpackungmaschinen GmbH Model – Dogatherm 41 Buffer tank capacity – 100 L Filling volume (min.) – 25 ml Filling volume (max.) – 280 ml Output capacity – 4,500 to 8,000 cups per hour Csdsfddpvspfx Am Tsrc Suitable for filling the following products: milk, drinking cocoa, yoghurt, buttermilk, cream, sour cream, cottage cheese, pudding, fruit jelly, rice pudding, Nutella, jam, etc. Includes extra chain and a pallet with spare parts/replacement components. Additional filling head included. Diameter of extra chain for cups – 70 mm. HAD.20.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, številka stroja/vozila: 1000x40, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, skupna dolžina: 2.300 mm, skupna širina: 1.950 mm, skupna masa: 1.850 kg, delovna širina: 1.000 mm, delovno območje: 1.000 mm, Oprema: varnostna svetlobna zapora, Uporabljena, kot nova Ermaksan CNC upogibna stiskalnica (pressbrake), 1 meter x 40 ton, 3-osna, naprodaj Popolnoma opremljena z nadzorno enoto Cybelec Cybtouch 12 Leto izdelave: 2020 Tehnične specifikacije: - Največja dolžina upogibanja: 1 meter / 1000 mm - Razdalja med stebri: 800 mm - Največja stiskalna sila: 40 ton - Hod prečke: 100 mm - Širina mize: 90 mm Dimenzije (približno): - Dolžina: 2300 mm - Širina: 1950 mm - Višina: 1860 mm - Teža: 1850 kg Crsdpsvy Ewijfx Am Tsc Stroj je vključno s spodnjim multi-V orodjem in segmentiranim zgornjim orodjem.

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Credpfxofx Hv Hs Am Toc Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: rabljeno, Mounting: MK 4 Codpfxsb N Ezre Am Tjrc

Leto izdelave: 1979, stanje: rabljeno, Outreach: 22/29 mm Drive motor: at 380 V approx. 0.55 kW Crsdpfx Amozif Ss Tjc Space requirement: 450 x 500 x 560 mm Weight: approx. 6.5 kg Pressing force: 30 kN