Stroj za upogibanje pločevine - 4 valji

FALKEN 4 R HMS 1550 x 150

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm Fodpfx Aed Auaceflsft » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61373, It is in working condition. Ffedpfsvwlf Isx Aflst

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Ffodpfx Aed Ab H Hoflet Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 8618030, Offer 25182 Technical Specifications: - Max. working width: 2,040 mm - Max. material thickness: 4 mm - Roller diameter (each): 140 mm - Stroke: 70 mm - Rear and lower rollers adjustable for conical bending - Upper and lower rollers driven by motor - Working speed, forwards and backwards: 6 m/min - Drive: 380 V / 6.2 kW - Space requirement (approx.): W 3,560 x H 1,100 x D 870 mm - Weight (approx.): 1,700 kg - Includes: - Asymmetric roller arrangement - Crowned, through-hardened rollers - Manual rear roller adjustment - Pre-bending Ffodpfx Afjwq It Tolst - Swiveling upper roller - Electric foot switch for forward and reverse operation

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ffodpfxetzfntj Aflet Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Weight (kg): 1200

Leto izdelave: 2022, Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll Fodpfx Afjg Tzbhelsft • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: novo, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Size ----- 3770 x 34 x 1.1 mm Saw Speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ---- 290 mm / 250 x 250 mm Fedpfx Aega Tzxofloft INCLUDES Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guidance with carbide guides Hydraulic quick-release vice Coolant pump Hydraulic drop-down cylinder Motor overload protection switch Automatic cut-off

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, obratovalne ure: 1.200 h, X 800 mm Y 460 mm Z 510 mm Styrsystem: FANUC Fsdsv Th E Aepfx Aflsft Spåntransportör Inklusive 4-axlig rundbord.

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Fedpfoiffwqox Afloft Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 - ST 42 structural steel)

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm Ffedpfx Afegg Nv Ieljt - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation - 400V