Stroj za upogibanje pločevine - 3 valji

OSTAS SMR 1070 x 96

Stanje: novo, Leto izdelave: 2026, SPIRO PIPE PRODUCTION MACHINE Metformer MTF 1602 TUBEFORMER designed for the production of SPIRO-type round ducts. The manufactured duct meets DIN EN 12237, BS, and Eurovent standards. • Decoiler with vertically adjustable brake for sheet metal coil • Forming strips for tube production • Fast, burr-free cutting thanks to rotary disc cutters • LCD touchscreen operation • Automatic lubrication system • Automatic cutting during tube production • Reporting system (daily-weekly-monthly production quantities) • Automatic error detection Technical Data: 1. Diameter range: 80–1600 mm 2. Thickness range: - Galvanized steel: 0.4–1.2 mm - Stainless steel: 0.4–0.7 mm - Aluminum: 0.4–1.3 mm 3. Strip width: - 0.4–1.0 mm thickness: 137 mm - 1.1–1.3 mm thickness: 140 mm 4. Production speed: 60 m/min 5. Motor power: 11.25 kW 6. Beading: smooth, single or double 7. Lock type: external lock 8. Cutting system: rotary disc cutting system 9. Weight: 2,900 kg 10. Machine dimensions: 1900 × 2050 × 1500 mm 11. Decoiler: 1780 × 1130 × 1250 mm 12. Table: up to 2700 × 950 × 1200 mm Operating Environment: • Power supply: 3-phase, 380V, 50Hz • Ambient conditions: Clean • Maximum ambient temperature: 40°C • Minimum ambient temperature: -5°C Ijdpfxewa Skhs Al Njtf • Humidity: 55–85% • Altitude:

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, skupna masa: 35.000 kg, Ковашки чук HUTA ZIGMUNT тип MPM 1000A, 3600 кгм, произведен в Румъния, модел CM 1250. Iedpfstgpdzox Al Notf

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment Ijdpfx Aog Tzbhjl Notf • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: novo, Dimenzija (D x Š x V): 1.630 x 700 x 1.200 mm Teža ca.: 480 kg Skupna potrebna moč: 1,1 kW Upogib: 2 Debelina pločevine: 3 mm Dolžina pločevine: 1.050 mm Tehnični podatki Valjčna naprava za pločevino Premer valja: 90 mm Hitrost valjanja: 6 m/min • Asimetrična razporeditev valjev • 2 valja gnana s pomočjo zavornega motorja • Nastavitev zadnjega valja z ročnim kolesom • Zgornji valj izmenljiv • Naprava za konusno valjanje • Dvojna nožna stikala za desni-levi tek • Spodnji in zadnji valj z utori za žico • Navodila za uporabo v NEMŠČINI Iedpfxsd Eqqqo Al Njtf DODATNO: kaljeni valji EURO 900,--

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilting angle: 0 to 120° Total height adjustment: approx. 700 mm Itedsdvn E Uopfx Al Nef Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Dimensions with horizontal table: 1,200 mm to 1,900 mm

Stanje: novo, Leto izdelave: 2026, Table length 4000 mm Table width 2000 mm Torch heads 1 Control CNC Workpiece weight 2510 kg Traverse speed 200 m/min Space requirement approx. 11599 x 3380 x 2718 mm Laser cutting system with automatic shuttle table Configuration 1. BodorPower Laser Source 12 kW 2. BodorGenius Laser Cutting Head with Autofocus 3. BodorThinker 3.0 Control System 4. Bed with mortise and tenon structure 5. Stretched aluminium gantry 6. One-click fully automatic processing 7. Automatic nesting of residual material 8. Edge detection and automatic zero-point focusing via smart detection 9. Bodor Lightning Perforation Technology 10. 21.5 inch touch screen monitor 11. Intelligent gas pressure control 12. Automatic setting of cutting gas pressure 13. Bodor Mango ® ergonomic remote control 14. Active collision avoidance function 15. Intelligent vibration protection Ijdpfx Alowh Ukyo Notf 16. Intelligent overheating adaptation 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminders 19. WIFI internet connection 20. Water cooling 21. Dust extraction function 22. Safety light curtains 23. Extraction system 24. Wear parts set CUTTING CAPACITY: MILD STEEL 35 mm STAINLESS STEEL 35 mm ALUMINIUM 20 mm

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, Itsdpfxot Hw Iie Al Njf water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Ijdsb Nulhepfx Al Netf Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Stanje: novo, - Capacity: 1070 x 2 mm - Conical rolling - Removable top roll - Foot control - Emergency stop Isdpfx Aljhc Uvme Netf - Documentation - 400V

Leto izdelave: 2024, stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Itodpfxsftdh Is Al Njf Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.