Ide Popolna Ekstruzijska Linija Za Pvc Profile nakup rabljenega (88.694)

Leto izdelave: 2013, stanje: rabljeno, Technical Data for Bale Opener Line for RDF, MSW, Paper, Cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of Manufacture: 2015 Number of Bales Opened: 674 Operating Time: Only 3 days, exclusively during commissioning of the entire system at new installation Opening Time: approx. 45 seconds per bale Bale Dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum Bale Weight: 2,000 kg System Discharge Height: 1,400 mm Maximum Conveyor Width: 1,200 mm Material to be Opened: RDF/MSW System Availability: 98% Noise Level of Bale Opening Line: 85 dB(A) Total Connected Load: 37 kW Rated Current: 125 A Operating Display: SIEMENS SIMATIC HMI Touch Control System: SIEMENS S7 ET200S Machine Dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Godpsu Tg I Djfx Afwjit Scope of Supply: - Feed Conveyor 3,500 x 1,200 x 1,400 mm - Infeed Conveyor to Opener 1,500 x 1,200 x 1,400 mm - Bale Opener (gripper with cutter) Special Equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for Short Operating Time: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The purpose of the installation was to allow municipal waste to be received, baled, wrapped, and stored in case of a plant malfunction or maintenance, until normal operation resumed. After the issue was resolved, all bales would then be opened and the waste fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned and subsequently never used in regular operation. Only during initial commissioning in 2015 were 674 bales opened over three days. The system is in excellent, ready-to-use condition. Due to plant modifications, the installation area is needed for other purposes, and the complete line is therefore offered for sale. Brief Description of the Bale Opening Process: The compressed bales are placed onto the infeed conveyor from the side or rear using a forklift. For opening, the bales must be positioned with the wire or twine binding running horizontally to the conveyor; otherwise, bales must be rotated 90°. The infeed conveyor moves each bale to the cutting unit. The grippers hold the wire or twine strapping firmly. The rotating knife cuts the bale lengthwise. The gripper then returns to its initial position. The opened bale is then conveyed to the discharge chute and drops onto the subsequent conveyor system. Notes: Original price of the complete system was €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. The system has been dismantled into transportable units, stored, and is available for inspection and loading at short notice. No liability is assumed for the technical specifications or any potential errors.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Linija za granulacijo plastičnih mas + za dele Sestava linije vključuje: - Ekstruder: CINCINNATI MILACRON CM65HP, letnik 1996 - Granulacijska glava - Sistem hlajenja granulata - Ciklon: GAMART - Pnevmatski transportni sistem za surovine DODATNE NAPRAVE - Eno-polžni soekstruderji – skupaj 9 kosov - Transport surovin: - Pnevmatski (praški, granulati) - Mehanski (polžni transporterji, 2x verižni redler) - 2 x koritni mlin – za mletje PVC profilov Tehnično stanje: naprave popolnoma delujoče, uporabljene v tekoči proizvodnji Uporaba: - Granulacija plastičnih mas (PVC, drugo) Gsdeyda Egepfx Afwjit - Sokoekstruzija Dokumentacija in slike na voljo na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a column. The line comes in parts. - Suitable for co-extrusion applications, e.g. multilayer profiles, strips, technical components. TECHNICAL DATA – BA92 (NOVEL) Extruder - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW DC, 210–2100 rpm - Degassing: 2.2 kW pump, 36 m³/h, 700 Hg vacuum - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder Gijdpfx Aoyc R U Aefwet - Screw: Ø1¾", length 21D, compression ratio 2:1, two-flighted - Material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt drive 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Technical condition: complete line, operational, ready for use Application: plastic processing in co-extrusion process Technical documentation available upon request. Additional spare parts included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, Popolna linija za proizvodnjo peletov, sestavljena iz: Silosa za sekance 8 m³ Kladivnega mlina 22 kW Silosa za oblance s 3 izpustnimi odprtinami Godpfxjy Ayiws Afweit Transportnega polža z dozirno enoto (vezivo) Walw stiskalnice za pelete Transportnega traku Hladilnega silosa za pelete z enoto za pakiranje in sejalnikom za fine delce

Stanje: skoraj kot novo (rabljeno), Inline folie-sealer en krimptunnel Merk: Kallfass Type: semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Gsdpog D Nv Tefx Afwoit Frame: Staal Doorvoerbreedte x Doorvoerhoogte: 1600 (band) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V + N + E, 65 kW Staat: In de huidige staat, werkend

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Višina dovoda: 900 mm Širina dovoda: 300 – 800 mm Neželezne kovine: 0,6 – 0,8 mm ali 0,8 – 1,0 mm (navesti pred naročilom) Neželezne kovine: 1,0 – 1,2 mm (samo pri fasadnih profilih) Gedpfx Afexwxdgsweit Jeklo (320 N/mm²): 0,55 – 0,70 mm Nerjavno jeklo: maks. 0,5 mm 3.830 mm x 2.045 mm x 1.275 mm 1.770 kg

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm Godsxvc N Dopfx Afweit - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100082MT, hitrost pomika os X: 25 m/min, širina transportnega traku: 1.250 mm, najv. debelina jeklene pločevine: 1 mm, širina tuljave: 1.250 mm, število rezil: 5, delovna širina: 1.250 mm, skupna širina: 2.450 mm, skupna dolžina: 11.300 mm, skupna višina: 2.900 mm, nosilnost: 1.000 kg, potrebna širina: 2.450 mm, zahteva za prostor dolžina: 11.300 mm, potrebna višina: 2.900 mm, Popolnoma delujoča rezalna linija Forstner MST 1250 s 5 rezili, 6-kratno vstopno mizo, 6 motornimi odvijalniki, vsak za 1000 kg, ročni poševni rez do 35 stopinj z valjčno škarjo, enota za stožčasti vzdolžni rez (trenutno ni v funkciji). Gedpfxeyx Evho Afwoit

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OMAG TRONIC 140/120 kompletna linija, velikost proizvodne palete 1450-1100, stroj z dvojnim polnjenjem, letnik 1993, regalni voziček z obračanjem, prepakiranje z bandiranjem, 10 kompletov kalupov, upravljanje Siemens S7. Giodpfxexl D Ime Afwot

Stanje: dober (rabljeno), Stroj za pasterizacijo zelenjave. Giodpfxerwn Hbo Afwet

Stanje: rabljeno, številka stroja/vozila: 006619, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 2: Dvo-kotni profilirni stroj – samostojni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 4: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 5: Transfer IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 6: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 7: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Giodjqy Em Njpfx Afwet Pozicija 8: Razkladalec IMA + MEINERT-COMBIMA/I/R75/2050

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, število ravnalnih valjev: 6, širina transportnega traku: 1.300 mm, najv. debelina jeklene pločevine: 1 mm, širina tuljave: 1.250 mm, dolžina rezanja (maks.): 6.400 mm, premer ravnalnega valja: 70 mm, potrebna širina: 3.500 mm, zahteva za prostor dolžina: 18.275 mm, potrebna višina: 4.000 mm, Enoosebno upravljanje, hiter dostop do številnih različnih pločevin, avtomatska menjava pločevine, standardne pločevine ostajajo nameščene na napravi; zgornje pločevine so manj pogoste vrste; varna rešitev pomične vzpenjalne pomoči za nakladanje zgornjih odvijalnih enot; programabilna razrezovalna naprava z 8 pari nožev v stacionarni izvedbi; rezalni noži so izmenično razporejeni za rezanje z majhnim zvijanjem; krožni noži AL p s premerom 100 mm za čim manjši rez; 7,2 m dolg trak za izvoz trakov Tehniška risba naprave v pdf je predstavljena zrcalno! Gsdpfx Afjxwc E Iswsit

Stanje: skoraj kot novo (rabljeno), Pakirna linija za skrčljive vrečke Linijo sestavljajo: Vakuumski pakirni stroj MULTIVAC C 700 Mere komore (D x Š x V): 1060x440x200 mm Mere stroja (D x Š x V): 1270x850x1150 mm Dolžina varilne letev: 1 x 1060 mm Cikel stroja: 15-40 sek. Napetost: 400 V-3-50 Hz Moč: 7,0 kW ; 22 A Gsdpfx Afjy Iv Iaewoit HENKELMAN DIPTANK 200 A Avtomatska platforma s transportnim trakom Digitalno upravljanje temperature Ohišje iz nerjavečega jekla Največja nosilnost: 30 kg Globina potopa: 200 mm Čas potopa: 3-5 sekund (nastavljiv) Cikel: 22 sekund Poraba stisnjenega zraka: 50 l/min pri 6 bar Samodejno krmiljen dotok vode Odtok vode Avtomatska kontrola nivoja vode Vgrajena zaščita tehtnice Časovni preklopnik za predgrevanje vode

Stanje: zelo dobro (rabljeno), 4-sided SIZING AND EDGE BANDING LINE + THROUGHFEED BORING MACHINE Consisting of the following machines: Giedpeyyb Sujfx Afwst A) "IMA" loading system (bridge design) with double pick-up station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for supplying panel stacks to the loader. B) 1st double-sided sizing and edge banding machine "IMA" model Combima/N/II/230/A/R3 (mm 1300) C) Panel turner (from longitudinal to transverse orientation) "IMA" D) 2nd double-sided sizing and edge banding machine "IMA" model Combima/II/740/B/R3+ (mm 3300) with KFA 30 (contour trimming unit for fine trimming) E) Throughfeed boring machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical boring supports) F) Motorized roller conveyor "IMA" G) Panel turner (from transverse to longitudinal orientation) "IMA" H) "IMA" stacking system (bridge design) with double stacking station, equipped with a central motorized roller conveyor. Includes 2 external, floor-mounted, motorized roller conveyors for transporting panel stacks away from the unloader.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Proizvodna linija Weinig CONTUREX C 125, letnik 2018 Gijdpfey Emrkjx Afwot

Leto izdelave: 1996, stanje: delavnici obnovljeno (rabljeno), No. 2590k 1 used compounding and pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: - 1x gravimetric metering system, 5-component SITECOM including control unit - 1x twin-screw extruder THEYSOHN type TSK 90 Screws: 2x Ø 90 mm – 36 L/D, co-rotating Segmented screws and barrel, water / medium cooled Screw speed up to 300 rpm Extruder drive 255 kW DC Godpfx Afjh Eyd Aowsit - 1x side feeder-extruder TSD 75, twin-screw, with 3 kW drive - 3x degassing ports - 1x melt filter Type K – HS – Y, 176 mm, with hydraulics - 1x melt pump with 22 kW drive - 1x strand die head with 32 x Ø3.5 mm holes - 1x strand cooling trough, 620 x 5000 mm - 1x strand pelletizer SG 300, 11 kW drive - Touchscreen control ResoTec / control cabinet Inspection / demonstration possible at short notice by arrangement. Further compounding lines and accessories can be found in our online machinery stock list on our homepage.

Leto izdelave: 2015, stanje: kot nova (razstavni stroj), številka stroja/vozila: 2245, OFFER No. 2245 1 used, as-new laboratory batch extrusion and pelletizing line including accessories, comprising: Gijdpfxsd Sg Hro Afwot - AlphaTec single-screw extruder, Type AE-S 25-30 Screw diameter: 25 mm – 30 L/D Extruder drive: 3 kW, screw speed: 10 – 80 rpm Air-cooled cylinder, electrically heated - 1x degassing zone - 1x manual screen changer with screen diameter 68 mm - 1x strand die head - 1x water bath 1,000 x 150 mm, height adjustable - 1x strand pelletizer, feed width 30 mm, drive 0.75 kW - Control cabinet with PID control, Melt pressure, frequency-controlled speed - Demonstration system A test run with your material can be arranged at short notice upon request. Further extruders available from stock in Wuppertal.

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 2586k,

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW Gijdjh Eyd Rspfx Afwst By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h depending on material, consisting of: Kreyenborg SW 100 stuffing unit, 7.5 kW drive BKG single-screw extruder Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled Screw speed up to 143 rpm Screw flight depth 14 mm Installed heating power approx. 35 kW Gjdpfx Aoi Dtb Ujfwoit 1x atmospheric degassing with melt backflow device ("Stuffer")* Screen changer, double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra charge > * Vacuum pump > Pellet classifier sieve, conveying system, big bag station > Process water cooling unit / temperature control Further pelletizing lines available ex works Wuppertal, please request our current machinery stock list or visit us.

Leto izdelave: 1996, stanje: delavnici obnovljeno (rabljeno), No. 2590k 1 used compounding and pelletizing line, throughput up to 1,200 kg/h, depending on material, consisting of: Gjdpfx Aogbffvofwsit - THEYSOHN twin-screw extruder, type TSK 90 - Screws: 2x Ø 90 mm – 36 L/D, co-rotating - Segmented screws and barrels, water/media cooled - Screw speed up to 300 rpm - Extruder drive: 255 kW DC - 1x side feeder-extruder TSD 75, twin-screw with 3 kW drive - 3x degassing ports - 1x screen changer, No. 1, type K-HS-Y, 176 mm screen, with hydraulics - 1x melt pump with 22 kW drive - 1x screen changer, type K-SWE 180 RS backflush, with hydraulics - 1x strand die head with 32 x Ø3.5 mm holes - 1x cooling trough 620 x 5000 mm - 1x strand pelletizer SG 300, 11 kW drive - Touchscreen control ResoTec / control cabinet Inspection / demonstration possible at short notice by arrangement. Further compounding lines and accessories can be found in our online machine inventory list on our website.

Stanje: delavnici obnovljeno (rabljeno), Stock No. 2452 1 used, partially overhauled, and function-tested pelletizing line Throughput up to 500 kg/h, depending on material, consisting of: - Kreyenborg SW 100 stuffing unit, 7.5 kW drive - BKG single-screw extruder, Ø 100 mm – 35 L/D, 132 kW drive – AC frequency controlled - Screw speed up to 143 rpm - Screw channel depth 14 mm - Installed heating capacity approx. 35 kW - 1x atmospheric degassing zone (vacuum pump available at additional cost) - Kreyenborg double-piston screen changer K-SWE 160 RS with backflush and screen area of 244 cm² - BKG underwater pelletizing system AH 300, complete with: * Start-up valve including hydraulic station * Pelletizer with 4 kW drive * Water pump 2.2 kW * By-pass system, water tank with 9 kW heater installed and heat exchanger - BKG granulate centrifuge TWE 300 with 3 kW drive - Granulate classification screen - Control cabinet with updated Siemens touch panel OPTIONAL at additional cost: > Vacuum pump > Material conveyor, Big-Bag station > Process water cooling/temperature control unit Gisdpfxsd Sg I Is Afwet Additional pelletizing plants available ex works Wuppertal. Ask for our current machinery stock list or visit us.

Stanje: rabljeno, obratovalne ure: 35.000 h, številka stroja/vozila: LC581, Used Complete CSD Can Filling Line – 14,000 Cans/Hour – Overview This used, complete can filling line for carbonated soft drinks (CSD) is designed for the production and industrial packaging of carbonated beverages, achieving up to 14,000 cans per hour in the 250 ml format. The heart of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 can seamer with 6 heads (can end size 200). The scope includes depalletizing, can rinsing, filling and seaming, tunnel pasteurization, inline inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used filling line solution. Technical Specifications & Performance Data Core Monoblock: Filler-Seamer Filler: Ortmann Herbst, isobaric, 45 valves (Year of manufacture: 1980) Seamer: Ferrum 706, 6 heads (Year of manufacture: 1982) Product type: carbonated soft drinks (CSD) Rated output: 14,000 cans/hour at 250 ml Can end: Type 200 (Industry size 200) Monoblock configuration: integrated filler-seamer block to minimize dissolved oxygen (DO) pickup Formats & Throughput Primary can format: 250 ml Line speed: up to 14,000 CPH (depending on format and product) Included Process Equipment Kaeser compressor system with booster and two compressed air tanks (Year of manufacture 2010, commissioning 2011) CIP system, three tanks (Year of manufacture 2011) Syrup room with cooling system (Year of manufacture 2011) Nagema mixer (Year of manufacture 1992) Five finished beverage tanks, each 10,000 liters (100 hl), steel with food-grade lining Beverage filter (Year of manufacture 2011) Frezart can depalletizer (Year of manufacture 2009, commissioning 2011) Two can washers, adapted to 250 ml (Year of manufacture 2011) Hermis tunnel pasteurizer (Year of manufacture 2015) Stratec fill level inspection for cans (Year of manufacture 2000) Victor can marker / coder (Year of manufacture 2020) Kisters packaging machine (Year of manufacture 1993) Keber palletizer (Year of manufacture 1997) Sita stretch wrapper (Year of manufacture 2011) Complete conveyor system connecting all machines + two can accumulation turntables (Year of manufacture 2011) Giodjyhbpzspfx Afwjt Thermo-shrink labeling line for plain cans (Year of manufacture 2015) Advanced Automation & Control Systems Inline quality control: Stratec fill level inspection for continuous monitoring and rejection of out-of-specification containers Product coding: Victor industrial printer for date/batch coding CIP capability: three-tank CIP system supports hygienic cleaning cycles for fillers and product pathways Integrated conveying and accumulation technology: conveyors with two turntables ensure even flow and buffer management for maximum uptime Detailed electrical and control documentation available upon request. Integration Options into the Production Line Upstream Section Depalletizing of empty cans (Frezart) and transfer to the can washer Dual can washers, adapted to the 250 ml format...

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 47.000 h, številka stroja/vozila: LC582, Used Complete Krones CSD PET Bottling Line – 22,000 BPH – Overview This used, ultra-clean Krones CSD PET bottling line is a highly efficient turnkey solution for beverage production and industrial packaging of carbonated soft drinks, cider, sparkling water, still water, and CO2-blended juices. Built in 2010 by Krones and GEA and maintained in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 l) and 18,000 bph (1.5 l), featuring a Contiform S12M stretch blow molder directly coupled with an ultra-clean isobaric filler-capper block. This is a market-ready used bottling line, designed for reliability, hygiene, and quick format changeovers in PET. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of construction: 2010 Operating hours: approx. 47,000 Rated output: 22,000 bph (0.5 L) | 1.5 L (18,000 bph) Products processed: carbonated soft drinks, cider, sparkling water, still water, CO2-blended juices Filling technology: Ultra-clean, isobaric, volumetric PET filling Current product: Apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Controls: Siemens Simatic S7 PLC platform Main Equipment Scope CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5,000 L, 30 m³/h Processing: GEA TDS system with flash pasteurizer, mixer, carbonator, deaerator, and process tanks Preforms: Preform tipper and feed conveyors; Krones Contifeed RS preform feeding system; Prejet linear preform cleaning unit Caps: Cassner cap feeding unit with cap rinsing and sterilization Blow molder: Krones Contiform S12M, directly linked to the ultra-clean block (no air conveyor) Filler-capper block: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler block cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L fill level inspector; Krones Checkmat 731 EM label inspector Conveying & testing: SYNCO bottle conveyor; Krones Flowliner bottle leak tester Labeler: Krones Contiroll OPP 720-15, double reel wrap-around labeler with hotmelt Secondary packaging: Krones VarioPro FS shrink tray packer; Krones Multico S pack conveyor; Twin Pack handle applicator Pack coding: Leisinger Jet 3 inkjet coder Palletizing: Krones Robopox Modulpal (2016) Advanced Automation & Control Systems Line Automation & PLC Siemens Simatic S7 series PLC for coordinated line control, interlocks, and diagnostics Integrated bottle cleaning via Krones Vario Dos for validated ultra-clean cycles Recipe and parameter management for rapid PET format changeovers Quality Assurance & Traceability Laser date coding (Domino DDC 3) on primary packaging; Inkjet coding (Leisinger Jet 3) on packs Inline inspection with Krones Checkmat systems for fill level and label presence/position Godpfx Aeyhbmtefweit Leak detection via Krones Flowliner for container integrity Options for integration...

Stanje: novo, Leto izdelave: 2025, For clients from: Lithuania, Latvia, Estonia. Coil metal leveling, slitting, and shearing equipment is an essential attribute for companies working with sheet metal. FORSTNER, a company with long-standing experience in the manufacturing of coil metal processing machines, currently offers the market not only standard metal shears, but also equipment that performs leveling, slitting, and shearing functions. Shearing is carried out by either rotary disc shears or guillotine shears. Depending on your production goals and the tasks your equipment needs to perform, these machines can be categorized into four groups: 1. Cut-to-length lines; 2. Slitting and cut-to-length lines; Gisdowd E N Ejpfx Afwjt 3. Leveling and cut-to-length lines; 4. Leveling, slitting, and cut-to-length lines. On certain slitting machine models, the leveling and slitting functions can be automated, enabling quick and convenient parameter adjustments when starting to process a new material. The Forstner EASY series features machines that cut metal sheets to a specified length using guillotine or rotary disc shears. The EASY CUT machine is equipped with rotary disc shears capable of cutting steel up to 1.0 mm thick. If you need a machine for cutting thicker metal, the EASY PRO model with a guillotine is recommended. Working widths for these machines are available at 1250 mm or 1500 mm. Forstner STRAIGHT: These machines pull a pre-set length of metal sheet, level it, and cut it to length. Depending on the type of cross-cutting knife and leveling roller diameter, the processed metal thickness ranges from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT models differ in leveling roller adjustment: mechanical or automatic. Integrated automatic controls save time in the long run, as a single button press is enough to change machine parameters. Automatic control is an excellent choice when working with a wide range of materials. Forstner SLIT series is a reliable solution for slitting coil metal. The SLIT CUT and SLIT PRO models not only cut the metal but also slit it lengthwise into strips of selected width. As standard, these models come equipped with 5 slitting knives (maximum number – 7). The main difference between SLIT CUT and SLIT PRO models is the type of cutting knife: rotary disc shears or guillotine. The Forstner COMPACT series consists of machines that pull the required length of material, level it, slit it into strips of desired width, and cut sheets to specified lengths. The main difference between models is the type of cutting blade used: rotary disc shears or guillotine. Leveling rollers and slitting knives are mechanically adjustable. POWER COMPACT is a powerful coil metal leveling, slitting, and cut-to-length system. The two available models differ in working width and maximum sheet thickness for cross-cutting. nuSLIT machine models are fully automated systems. If you are looking for automated machines that perform slitting and cut-to-length functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented rotary disc shears. The nuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also level the metal sheet. The maximum number of slitting knives in these models is 7. Should you have any further questions, we are always pleased to offer consultations by phone or arrange an on-site demonstration of the equipment.