Linija za sestavljanje

THEYSOHN TSK 90

Leto izdelave: 1996, stanje: delavnici obnovljeno (rabljeno), No. 2590k 1 used compounding and pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: - 1x gravimetric metering system, 5-component SITECOM including control unit - 1x twin-screw extruder THEYSOHN type TSK 90 Screws: 2x Ø 90 mm – 36 L/D, co-rotating Segmented screws and barrel, water / medium cooled Gsdpfx Aoh Eyd Ajf Ssir Screw speed up to 300 rpm Extruder drive 255 kW DC - 1x side feeder-extruder TSD 75, twin-screw, with 3 kW drive - 3x degassing ports - 1x melt filter Type K – HS – Y, 176 mm, with hydraulics - 1x melt pump with 22 kW drive - 1x strand die head with 32 x Ø3.5 mm holes - 1x strand cooling trough, 620 x 5000 mm - 1x strand pelletizer SG 300, 11 kW drive - Touchscreen control ResoTec / control cabinet Inspection / demonstration possible at short notice by arrangement. Further compounding lines and accessories can be found in our online machinery stock list on our homepage.

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. Gsdpfxoh S Nz Sj Af Sjir The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Gjdpfx Afow U Ry No Soir Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Leto izdelave: 1993, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RH 241-1-50-30v, Rabljen REIFENHÄUSER enopolžni ekstruder s premerom polža 50 mm x 30v z rebrastim dovodom in odplinjevalnim območjem tip RH 241-1-50-30v z DC pogonom 30,2 kW leto izdelave 1993 z nameščeno elektro omaro Giedpfxepy Eygs Af Ssr Popolnoma delujoč Ta (in druge) ekstruderje si lahko ogledate v našem skladišču v Königswinterju. Stroj je mogoče zagnati in prikazati v praznem teku. Polž je bil izvlečen in očiščen.

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Gisdpfjiyyf Isx Af Ssr Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: pripravljen za uporabo (rabljen), Stisna sila: približno 700 kN (približno 70 ton) Moč motorja: približno 11 kW Napajanje: 3 × 400 V / 50 Hz Teža posamezne bale: do približno 600 kg Dimenzije bale: približno 1100 × 1100 × 1200 mm Dimenzije stroja: približno 5,9 m dolžine, 2,5 m širine, približno 2,6 m višine Teža stroja: približno 7 ton Čas cikla: približno 45–47 s Konstrukcijske značilnosti • velik polnilni otvor za karton • možnost samodejnega polnjenja (npr. s transporterjem) Giedpfx Afsra Ddde Ssr • ročno vezanje z žico (4 žice) • blokada palete in hidravlična vrata za prevzem bale Prednosti te preše • velike bale = manj transportov • visoka stisna sila • prilagojena za neprekinjeno delovanje Balirka iz leta 2016 brez preklopnika

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 12 meseci, skupna širina: 1.400 mm, skupna dolžina: 1.400 mm, skupna višina: 2.000 mm, hitrost vrtenja (razdalja/čas): 50 mm/min, Rotary Tablet Press SPT-TP500DH Salt Production Touch screen, PLC Control Panel; HMI (Human Machine Interface); SPT-TP 500 DH Number of Stations: 33 Standard Tools: EU 1” (IPZ1”) Gisdpfxjvu Uk Uo Af Ser Max. Output/Hour: 180,000 pcs Rotations per Minute (rpm): 5–50 Max. Tablet Dimension (Round): 30 mm Max. Filling Depth: 35 mm Upper Punch Penetration (max.): 1–6 mm Max. Main Compression Force: 20 t Die Diameter: 41.30 mm Die Height: 38.10 mm Punch Barrel Diameter: 31.70 mm Punch Length: 154 mm Machine Dimensions with Hopper (L x W x H): 1,400 x 1,400 x 2,000 mm Weight: 7,000 kg Power Rating: 20 kW Voltage / Frequency: 240/400 V – 50/60 Hz

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.178 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 667171, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.096 mm, This is a KUKA KR 210 R3100 ultra, year of manufacture 2018. We are happy to offer you the robot as a fully refurbished unit as well! The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination - Profinet KRC-Nexxt - RemoteService - SafeOperation Godpfsrnrprex Af Sjir - UserTech

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Gijdsq A Um Rspfx Af Ssr Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Discharged thermal energy: With top heating approx.: 10,260 KJ/h With top and bottom heating approx.: 17,715 KJ/h Special equipment: Hollow floor device available Control cabinet: included

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Giedpfxjhy Tp De Af Sor Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany