Cefla Škropilnica Cefla Kleenspray, S Papirnatim Trakom nakup rabljenega (82.817)

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30052, Merilna naprava za konture CV300 s svojim merilnim obsegom 100 x 300 mm omogoča varno preverjanje kontur tudi velikih in težkih obdelovancev. Tehnični podatki Zunanje upravljanje prek standardnih USB-vmesnikov Merilno območje CV300: 100 x 300 mm Položajni obseg Z-stebrička: 400 mm (opcijsko 600 mm) Programsko vodena funkcija dviga tipalnega kraka Lhsdpfx Ansyt Smbsfog Avtomatsko merjenje s Teach-In programiranjem Možnost merjenja tudi izjemno velikih in težkih vzorcev Avtomatizirano gibanje vseh osi Enostavna menjava tipalnega kraka

Stanje: zelo dobro (rabljeno), Profesionalni zunanji mikrometer priznane znamke Mahr, namenjen natančnim meritvam v industriji, delavnici in laboratoriju. Naprava se odlikuje z visoko natančnostjo ter robustno izdelavo, velik LCD zaslon pa omogoča hiter in enostaven odčitek rezultatov. . Merilno območje: 25–50 mm / 1–2” . Ločljivost: 0,001 mm (1 µm) . Funkcije: ZERO, ABS, REL, TOL . Razred zaščite: IP65 – odpornost na prah in brizganje vode . Napajanje: baterija CR2032 (3 V) . Ergonomična, natančna konstrukcija iz kaljenega jekla . Pregleden LCD zaslon . Kataloška številka: 4157042 . Proizvajalec: Mahr GmbH – Nemčija V kompletu: . Digitalni mikrometer Mahr Micromar 40 EWR-S . Merilni standard . Nastavitveni ključ . Dokumentacija in navodila za uporabo . Originalen transportni kovček Stanje naprave: zelo dobro – popolnoma tehnično brezhibna in pripravljena na uporabo. Odlična izbira za industrijske obrate, precizne delavnice in merilne laboratorije. Lodpjxl Rf Sjfx Anfshg

Stanje: rabljeno, for installation on an existing bar conveyor. Scope of delivery: Tube housing with exhaust fan and control cabinet. Without transport - Manufacturer: Cefla - Model: ECO LIGHT - Working width: 1,300 mm - Number of tubes from above: 1 piece - Tubes positioned straight - Suitable for mercury tubes - Suitable for gallium tubes Lhjdpsvun Uyjfx Anfeg - Reflector, swivelling - Total connected load: 14.61 kW - Location: in stock - Voltage/Hz: 400 / 50

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: 318113001, Stroj je bil delno obnovljen in testiran. - Proizvajalec: Cefla - Tip: UV-R3 - Letnik: 2018 - Delovna širina: 1300 mm - Višina obdelovancev: ~ 3 - 70 mm - Število zgornjih cevi: 3 kos - S transportom preko palic - Razmak palic: 60 mm - Primeren za živosrebrne cevi - Primeren za galijeve cevi - Moč cevi: maks. 120 W/cm - Priključna moč: 56KW/104A - Volt, Hz: 400 / 50 - Elektroomarica integrirana pod strojem - Nastavljiv podajalnik: ~ 1,25 - 21,25 m/min - Dolžina: ~ 3.500 mm - Širina: ~ 2.700 mm - Višina: ~ 1.600 mm - Količina izpušnega zraka: 3.600 m³/h - Lokacija: na zalogi Ledpfxex Tpx As Anfehg - Volt, Hz: 400 / 50

Stanje: rabljeno, Leto izdelave: 1998, - Proizvajalec: Sorbini - Tip: T/20MF - Leto izdelave: 1998 - Delovna širina: 1.300 mm - Stroj bo obnovljen, nato v zelo dobrem stanju - Delovna višina: pribl. 880 - 920 mm - Višina obdelovanca: pribl. 5 - 80 mm - Upravljalna stran levo - Premer valja: pribl. 248 mm - Dozirni valj: pribl. 174 mm - Obratni pogon - Dvojna membranska črpalka: 1 kos - Dolžina: 950 mm - Širina: 2.550 mm - Višina: 1.540 mm - Teža: pribl. 1.220 kg - S krmilno omaro - Volt, Hz: 400 / 50 - Lokacija: na zalogi - Nihanja napetosti maks. +/- 5 % SLIKE niso originalne slike, Ledjvupc Espfx Anfohg so le primer obnovljenega stroja.

Stanje: rabljeno, Leto izdelave: 2003, NA VOLJO od 08/2026 UV sušilnik, Cefla UV 2000 - Proizvajalec Cefla/Sorbini - Tip UV 2000 M2 / TTE2500 - Leto izdelave 2003 - Delovna širina 1.300 mm (1.445 mm) - Delovna višina 900 ± 40 mm - Upravljalna stran desna - Največja višina obdelovanca 70 mm - Število cevi od zgoraj 2 kos - Cevi naravnost postavljene 2 kos - Primerno za živosrebrne cevi - Primerno za galijeve cevi - Moč cevi maks. 120 W/cm - Paletni transport - Dolžina 2.500 mm - Širina 2.300 mm - Višina 1.500 mm Ledpfx Asyifwpenfehg - Volt, Hz 400 / 50 - Skupna električna priključitev 86 A / 36,4 kW - Dovoljena napetostna odstopanja maks. ± 5 % Slike so le primeri enakega stroja*

Stanje: rabljeno, for installation on an existing bar conveyor. Lhsdpfoumvqcjx Anfog Scope of delivery: housing with 2 tubes, exhaust fan, and control cabinet. Without transport

Stanje: rabljeno, Leto izdelave: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 ± 40 mm - Operator side: right - Maximum workpiece height: 70 mm - Number of top lamps: 2 pcs. - Straight-set lamps: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Maximum lamp output: 120 W/cm - Rod conveyor - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage/Frequency: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max. ± 5 % Lhodpfoxn Nlvox Anfeg *Images are for illustration purposes only and show a machine of the same type

Leto izdelave: 2019, stanje: rabljeno, številka stroja/vozila: DB407803A, Tehnični podatki: - Proizvajalec: Cefla - Tip: TR - Leto izdelave: 2019 - Z lastno električno omaro - Nastavitev pomika ~ 2,2 - 20 m/min - Nujno izklop (not-Aus) - Prikaz frekvenčnega pretvornika (Hz) - Transportna dolžina: - Delovna širina: 1.300 mm Lhsdeyifv Sopfx Anfjg - Delovna višina: 900 ±20 mm - Vgrajena moč: 0,8 kW - Izvedba EX ATEX - Lokacija: na zalogi

Leto izdelave: 2014, stanje: rabljeno, številka stroja/vozila: DB407803A, Tehnični podatki: - Proizvajalec: Cefla - Tip: TR 3000 - Leto izdelave: 2014 - Z lastno elektro omaro - Nastavitev podajanja ~ 2,2 - 20 m/min - Nujna zaustavitev - Prikaz frekvenčnega pretvornika (Hz) - Transportna dolžina: 3.000 mm - Delovna širina: 1.300 mm - Dolžina valja: 1.450 mm - Delovna višina: 900 +-20 mm - Premer valja: 65 mm Ljdpfx Anoyatdzefshg - Razmak med valji: 120 mm - Inštalirana moč: 0,8 kW - Izvedba EX ATEX - Lokacija: na zalogi

Stanje: rabljeno, Leto izdelave: 2008, Infrared dryer, consisting of: Module 1: - 3 units IRM lamps with a power rating of 3,500 watts per lamp - Structure made of painted sheet metal - Installed electrical power: 10.5 kW Module 2: - 2 units IRM lamps with a power rating of 3,500 watts per lamp - Structure made of painted sheet metal - Installed electrical power: 7.0 kW Total connected load: approx. 19.5 kW / 400V / 50 Hz Exhaust air: - Exhaust fan approx. 1,800 m³/h - Supply/room air approx. 1,800 m³/h - Extraction nozzle Ø160 mm ROLLER CONVEYOR - Manufacturer: Celfa Lsdpfxswub Uxe Anfjhg - Year of manufacture: 2008 - Steel rollers wrapped with heat protection tape - Roller pitch: 160 mm - Feed adjustment via handwheel - Installation length: 2,000 mm - Feed rate approx. 3 - 7.5 m/min - Including control cabinet - 400V/50Hz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 2014 Load capacity: 20 kg Reach: 1,726 mm Ljdpjr Aka Asfx Anfshg

Stanje: pripravljen za uporabo (rabljen), Dobro ohranjen kompakten detektor kovin za prosti pad – 55 mm odprtina pri tej enoti RP55 – odličen za uporabo s polnilnim strojem ali za prenos med polnilcem in izdelovalcem vrečk ali strojem za vrečke – preizkušen in delujoč – pripravljen za pošiljanje po vsem svetu. Lsdpfoy Nzbzjx Anfohg

Stanje: novo, Working width: 3,500 mm Working height: 2,300 mm Number of pressure cylinders: 4 pcs. Lhodpsd Ih H Sjfx Anfog S&S Frame Press Type RP 2000 – CE version Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment includes central pressure beam, angled window device, counter profiles for single-part production, and much more! Request our complete price list! Description: Robust frame welded construction made of thick-walled special profiles, sliding carriages, and pressure beams with 50 mm hole pitch. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical pressure cylinders on special pressure beams with single-hand quick adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure sustained absorption of high pressing forces. Quick and smooth width adjustment via ball-bearing guide carriage with central locking, fixing in 50 mm increments. Upper horizontal pressure cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal pressure cylinder with centering bores for both abutment levels, no weight compensation. Abutment and pressure plate depth 100 mm. Pressure plate and support width 130 mm. Machine controlled electro-hydraulically, with 2 vertical pressure cylinders, Ø 50 mm, stroke 120 mm, single-acting, with weight compensation and single-hand quick adjustment; 2 horizontal pressure cylinders, Ø 40 mm, stroke 120 mm, double-acting with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 100 bar corresponding to 400 to 2,000 kg pressing force vertically; powered by 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer without guarantee, images may show optional equipment!)

Stanje: novo, Working width: 3,500 mm Working height: 2,300 mm Number of pressing cylinders: 4 pcs. S&S Frame Press Type T 35 – CE Version ----- Options: Working widths from 3,000 mm to 5,000 mm Ledpjd Ih H Njfx Anfehg Working heights from 2,000 mm to 3,000 mm Optional equipment: center pressure beam, tilting window device, counter profiles for individual part production, and much more! Request the complete price list from us! Description: Robust frame welded construction made of thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole grid. Continuous left-side support for wide-veneer pressing; lower support on two levels. Vertical pressing cylinders mounted on special pressure beams with single-hand rapid adjustment and weight balance, height adjustable in 50 mm hole increments. Long sliding carriages ensure sustained absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriages with central locking, fixation in the 50 mm hole grid. Upper horizontal pressing cylinder continuously height adjustable and equipped with weight balance. Lower horizontal pressing cylinder with centering holes for both support levels, without weight balance. Support and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Electro-hydraulic machine control, with 2 vertical pressing cylinders d = 60 mm, stroke 120 mm, double-acting, with weight balance and single-hand rapid adjustment; 2 horizontal pressing cylinders d = 40 mm, stroke 120 mm, double-acting, with weight balance; 2 manual control valves, manometer, 1 pressure regulating valve from 20 to 130 bar equating to 550 to 3,500 kg vertical pressing force. With 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey. (Technical data according to manufacturer, subject to change. Image may show optional equipment!)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 12.000 W, valovna dolžina laserja: 1.060 nm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, maks. debelina aluminijaste pločevine: 50 mm, maks. debelina medeninaste pločevine: 50 mm, najv. debelina bakrene pločevine: 50 mm, dolžina mize: 3.100 mm, širina mize: 1.550 mm, potovalna razdalja osi X: 3.100 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 150 mm, hitrost pozicioniranja: 169 m/min, natančnost pozicioniranja: 0,03 mm, natančnost ponavljanja: 0,02 mm, teža obdelovanca (maks.): 1.800 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, priključek za stisnjen zrak: 14 letvica, skupna masa: 8.000 kg, skupna dolžina: 10.000 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, trajanje garancije: 12 meseci, potrebna višina: 2.500 mm, zahteva za prostor dolžina: 6.200 mm, potrebna širina: 5.800 mm, Oprema: hladilna enota, varnostna svetlobna zapora, Our space-saving model: G3015 HF mini 12KW fiber laser cutting machine with side exchange table The HF mini is our compact, space-saving fiber laser cutting machine with a side exchange table. The perfect entry-level solution for professional laser part production and series manufacturing. This machine is ideally suited for steel fabricators, sheet metal processors, and serial manufacturing companies looking to cut up to 50mm of steel with 12kW of laser power while minimizing the need for post-processing. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a comparable plasma system or a CO₂ laser system with the same cutting power. Alternatively, the machine can also be equipped with a 20 kW laser source, enabling an increase in cutting speed of up to 50%. When replacing an old CO₂ laser machine, a government subsidy of up to 15% of the investment sum can be requested. Contact us for details! German customer service in the North Rhine-Westphalia (NRW) Rhineland region with a 400m² spare parts warehouse. German-speaking phone and on-site support with short response times. All our machines are installed and supported by us. 80% of machine components are German or European-made. 1.5 x 3m cutting area Ljdpsv Nzvyofx Anfjhg X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 400 Maximum speed [m/min]: 169 Acceleration: 1.7 g Precision [mm]: 0.03 Repeat accuracy [mm/m]: 0.02 Dimensions: Length [mm]: 6200 Width [mm]: 5800 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting performance at 6kW: Steel – 25mm, Stainless Steel – 18mm, Aluminum – 18mm Cutting performance at 12kW: Steel – 50mm, Stainless Steel – 50mm, Aluminum – 50mm • Side exchange table, ideal for compact workshops • Fully enclosed for optimum laser safety • Compact design saves on shipping costs and reduces installation time • Improved accessibility through full-length side sliding door • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to powerful control system and motors • Integrated control cabinet and laser source for easy maintenance access • Fast service response enabled via remote service • Fully enclosed machine with OD5+ laser protection glass windows • Small footprint • Flexible operation thanks to adjustable control panel, front door, and side sliding door Higher dynamics & productivity • The optimized machine bed and extruded aluminum gantry, equipped with the fast real-time controller “Han’s 901 (Rexroth)” and high-performance Rexroth motors, enable the HF Mini S to achieve very high speeds and acceleration. Configuration and component selection: Control system: Han’s 901 (Rexroth, Germany) Servo driver: Rexroth, Germany Cutting head: Precitec, Germany Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Exchange table: Han’s, China

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 6.000 W, valovna dolžina laserja: 1.060 nm, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, maks. debelina aluminijaste pločevine: 15 mm, maks. debelina medeninaste pločevine: 10 mm, najv. debelina bakrene pločevine: 10 mm, dolžina mize: 3.100 mm, širina mize: 1.550 mm, potovalna razdalja osi X: 3.100 mm, pomik osi Y: 1.550 mm, hitrost pozicioniranja: 120 m/min, natančnost pozicioniranja: 0,03 mm, natančnost ponavljanja: 0,03 mm, teža obdelovanca (maks.): 2.000 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, priključek za stisnjen zrak: 14 letvica, skupna masa: 7.000 kg, skupna dolžina: 6.000 mm, skupna širina: 2.500 mm, skupna višina: 2.500 mm, trajanje garancije: 12 meseci, potrebna višina: 2.500 mm, zahteva za prostor dolžina: 6.000 mm, potrebna širina: 2.500 mm, Oprema: hladilna enota, varnostna svetlobna zapora, G3015 HF Mini S 6KW Fiber Laser Cutting Machine The HF Mini S is a high-quality, ultra-compact fiber laser cutting machine – your ideal entry point into laser part production. This machine is perfectly suited for small steel fabricators and sheet metal processors who need to cut up to 25mm with 6kW steel laser power, and want minimal post-processing effort. Due to its high energy efficiency, this machine can save up to 25% more energy compared to a plasma system with equivalent cutting capacity. Alternatively, the machine can be equipped with a 12 kW laser source, enabling cutting thicknesses up to 50mm in steel, stainless steel, or aluminum. German customer support in the NRW Rhine region, with a spare parts warehouse covering 400m². German-speaking telephone and on-site support with fast response times. All our machines are installed and maintained directly by us. Cutting Area: 1.5 x 3m X-Axis [mm]: 3100 Y-Axis [mm]: 1550 Z-Axis [mm]: 180 Max Speed [m/min]: 120 Acceleration: 1.5 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions: Length [mm]: 6200 Width [mm]: 2500 Height [mm]: 2500 Max Sheet Weight [kg/table]: 2150 Available Laser Power: 3 kW, 6 kW, 12 kW Cutting Performance at 6kW Steel - 25mm, Stainless Steel - 18mm, Aluminum - 18mm Cutting Performance at 12kW (optional) Steel - 50mm, Stainless Steel - 50mm, Aluminum - 50mm • Fully enclosed for maximum laser safety Lsdpfjv Nzrbsx Anfohg • Compact design reduces shipping costs and installation time • Improved accessibility via side sliding door along the machine length • Ergonomic loading/unloading for small workpieces • High dynamics and productivity through advanced control and motors • Integrated electrical cabinet and laser source for easy maintenance • Fast service response thanks to remote service capability • Fully enclosed machine with OD5+ laser-protection viewing windows • Small footprint • Adjustable control panel, front door, and side sliding door for ease of use Enhanced Dynamics & Productivity • The optimized machine bed and extruded aluminum gantry, equipped with the fast real-time controller Han’s 901 (Rexroth) and powerful Rexroth servo motors, achieve very high speed and acceleration on the HF Mini S. Component Configuration & Selection Control System: Han’s 901 (Rexroth, Germany) Servo Drives: Rexroth, Germany Cutting Head: Han's, China Linear Guideways: PMI, Taiwan (China) Rack: Svarog, Czech Republic Gearbox: Shimpo, Japan Servo Valve: Lanny, Germany Machine Frame: Han’s, China Gantry: Han’s, China Z-Axis: Han’s, China Shuttle Table: Han’s, China

Leto izdelave: 2026, stanje: novo, Sejalni stroj | Vibracijski sejalni stroj tip ASM-550 Razstavni stroj - Znamka: S&F GmbH - Tip: ASM-550 - Kapaciteta sejanja: pribl. 60–70 m³/h (pri sekancih in žagovini) - Površina sita: 5,4 m² - Frakcije: 3 ali 4 - Sejalna nadstropja: 3 - Pogonska moč: 4,0 kW - Teža stroja: pribl. 3.800 kg - Barva stroja: RAL 6011 reseda zelena - Vložki sita in izpust materiala po izbiri Primeren mdr. za sejanje naslednjih razsutih materialov: - lesni sekanci in sekalni material Ljdpfxoxtfv Ie Anfjhg - žagovina in lesni prah - biomasa - leseni peleti - lesno oglje - odpadni les - lubje Vibracijsko sito | sito za sekance | vibracijski sejalni stroj | plansko sito | vibracijsko sito | valjčni separator | sejalni stroj za sekance

Stanje: novo, Leto izdelave: 2026, Trough conveyor belt | Troughed belt conveyor | Conveyor belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Helical geared motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Lhsdpfx Ajw Ad Rrsnfsg Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-angle conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 fir green Suitable for, among others, the following bulk materials: Wood chips, sawdust and wood dust, biomass, wood pellets, charcoal, waste wood, bark, earth, humus, recycling material, trimmings, and much more. Accessories (optional): Feed hopper, belt scraper, chassis, drawbar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Stanje: novo, Leto izdelave: 2026, Trough Conveyor Belt | Troughed Belt Conveyor | Conveyor Belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/8 Belt width: 500 mm Axle distance (A-A): 8,000 mm Throughput capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Drum motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Lhedpfx Ajxk Tg Nsnfeg Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (32 mm) Machine weight: approx. 800 kg Machine color: RAL 6011 reseda green Suitable for, among others, the following bulk materials: Potatoes, wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cutoff pieces, and much more. Accessories (optional): Feed hopper (loading hopper), internal belt scraper, undercarriage, tow bar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Leto izdelave: 2026, stanje: novo, Vibrating Screen Machine Series ASM S&F vibrating and flat screens are used in a wide range of applications throughout the wood processing industry (sawmills, pellet plants). The "ASM" series screening machines are used to screen wood chips, wood pellets, sawdust, reclaimed wood, biomass, and many other sawmill by-products in both dry and wet processing environments. The gentle, horizontally circular screening motion of the inclined screen box ensures high separation efficiency of this vibratory classifier. One key advantage is that long and fibrous particles slide diagonally or tangentially over the screen surface. As a result, in contrast with throw screens, there is no risk of clogging or pegging. Further advantages include a robust design, high throughput capacity, and long service life with minimal maintenance requirements. In addition to standard sizes, the company also offers the "ASM" series as a customized split version for existing installations. This allows new screening machines to be integrated even where space is tight or access is restricted, such as in existing plants or sawmills. ASM screening machines provide screening areas from 0.5 to 15 m² (per deck) and are characterized by high throughput capacities (up to 350 m³/h, depending on material). At a glance: - Ideal for: wood chips, pellets, sawdust, biomass, bark, reclaimed wood, substitute fuels - Application areas: wood industry, recycling & disposal, animal feed - Screening area: 0.5 – 15 m² (up to 30 m² as a double-deck version) - Throughput (material-dependent): up to 350 m³/h Lsdpfx Anein Ey Sefshg - Separation size: 0.1 – 150 mm (dependent on machine size) - Drive power: 0.55 – 15.0 kW (dependent on machine size) Advantages: - High throughput - High separation efficiency - No clogging or pegging - Quiet and low-maintenance operation - Versatile - Customized manufacturing Need more information? Contact us! We are happy to advise you.

Leto izdelave: 2025, stanje: novo, Screening plant for loading wood pellets, stationary New manufacture Lhsdoinkw Aopfx Anfog Screening capacity: 10 - 50 t/h (depending on configuration) Comprising: - Modular silo - Screening machine type ASM - Conveyor belt type MFB incl. magnetic separator - Loading set // MODULFLEX loader - Tubular screw conveyor (optional) - De-dusting unit (optional) Functional description and operation: The pellets are fed into the modular silo by wheel loader. The pellets are then conveyed onto the ASM vibrating screening machine. The screening machine separates the pellets into two fractions (pellets and fines). The screened pellets are loaded into the silo vehicle using a trough belt conveyor and loading set. Thanks to the integrated level sensor in the loading assembly, the system automatically switches off once the silo vehicle is sufficiently filled. Fines are discharged via a screw conveyor. To minimize dust exposure, the screening plant can be equipped with an additional NE de-dusting unit. Depending on the configuration, the screening plant achieves a throughput of between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening performance - Precise separation - Low noise and low maintenance - Flexible application - Custom manufacture Do you require further information? Please contact us! We will be happy to advise you. We look forward to your enquiry!

Leto izdelave: 2026, stanje: novo, Screening plant for wood chip screening Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on model) Comprising: - Vibrating feeder bunker type AVB - Screening machine type ASM - Subframe / hook lift (optional) - Conveyor belt type MFB - Electrical installation Function and operation: Lhedpein Ewlsfx Anfsg The wood chips are loaded into the vibrating feeder bunker with a wheel loader. They are then fed onto the vibrating screening machine type ASM. The screening machine separates the wood chips into three size fractions (oversize, chips, dust). The discharge of the fractions is handled by conveyor belts. Depending on the model, the screening plant achieves a capacity of 20 to 40 m³/h for wood chips. Advantages: - High screening capacity - High separation precision - Low noise and low maintenance - Flexible application - Custom manufacturing Do you require further information? Contact us! We will be happy to advise you.

Leto izdelave: 2026, stanje: novo, Screening plant for loading wood pellets, semi-mobile Custom-built Screening capacity: 10 - 50 t/h (depending on configuration) Comprising: - Trough belt conveyor type TFB - Screening machine type ASM - Conveyor belt type MFB incl. magnetic separator - Loading fitting // MODULFLEX loader Lodpfxeiux Tfs Anfohg - Tubular screw conveyor (optional) - Deduster (optional) Functional description and operation: Pellets are fed into the trough belt conveyor (including hopper extension) using a wheel loader. The pellets then pass onto the vibration screening machine type ASM. The screening machine separates the pellets into two size fractions (pellets and dust). The screened pellets are loaded into the silo vehicle via a trough belt conveyor and loading equipment. Thanks to the integrated level sensor in the loading fitting, the unit shuts off automatically when the silo vehicle is sufficiently filled. The dust fractions are discharged by means of a screw conveyor. To minimize dust emissions, the screening unit can be equipped with an additional deduster type NE. The screening plant's capacity (depending on configuration) ranges from 10 to 50 t/h (70 m³/h) for wood pellets. Benefits: - High screening capacity - Precise separation efficiency - Low noise and low maintenance - Flexible application - Customized manufacturing Need more information? Contact us! We will be happy to advise you.

Stanje: pripravljen za uporabo (rabljen), T&S ConturoMatic T2 Contour Measuring Device Measuring system: optical-incremental Measuring speed: 0.1...3.0 mm/s Positioning speed: up to 25 mm/s Measuring point interval: 0.5...25 µm Accuracy: ±(0.9+L(mm)/100) µm Radius accuracy: ±0.005% of the nominal value at R 12.5 mm Distance accuracy: ±(1.2+L(mm)/100) µm Angle accuracy: ≤ 30'' Technical data have been adopted as provided. You are welcome to arrange an inspection. We are happy to organize affordable shipping for you. You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. Lodewak Nvspfx Anfjhg The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.