UV sušilnik, nastavek, 1 tuba, Cefla EcoLight

Cefla Eco Light

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: 71257/1, - Manufacturer: Cefla/Sorbini - Model: Ecolight Csdpfx Afeumvp Esnjgp - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 870 +/- 20 mm - Max. workpiece height: approx. 70 mm - Number of tubes from above: 1 pc. - Tube alignment: straight, 1 pc. - Suitable for mercury lamps - Suitable for gallium lamps - Conveyor type: roller conveyor - Roller pitch: approx. 95 mm - Feed speed adjustable: 5 - 25 m/min - Machine length: 1,500 mm + 500 mm - Voltage, frequency: 400 V / 50 Hz - Total electrical connected load: 12.56 kW - Voltage fluctuations max. +/- 5%

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Cgsdpfxjw Sy T Hj Afnsp Location: Nattheim

Stanje: rabljeno, for installation on an existing bar conveyor. Scope of delivery: housing with 2 tubes, exhaust fan, and control cabinet. Cgjdjumvqcopfx Afnsp Without transport

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): Cedpewhmdfsfx Afnegp - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Cgsdpfx Aovupm Defnep Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) Cgjdpfx Aoqwyclofnsp comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Csdpfeh A Sfdox Afnogp Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: dober (rabljeno), WEBER pipe extrusion line including: Cgsdpjvryhysfx Afnsp WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, We offer for sale a complete SCHLATTER multi-point automatic steel wire welding line. Cgodpfx Astvpiljfnsp We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we have a wide selection of individual spot welders for steel wires.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, 5 kW air-cooled chiller for outdoor installation with axial fans. Standard configuration includes a P3 pump. Technical data available upon request. The unit is available in stock at our Güglingen warehouse. We are happy to provide free and professional advice for your application. Cedpfx Ajfqlllefnsgp We constantly have a changing selection of chillers in various sizes available from stock, both as demo units, new, and occasionally used. We also accept chillers in part exchange or purchase them outright.