Okvir pritisnite

S&S RP 2000

Stanje: novo, Working width 4000 mm Working height 2600 mm Number of press cylinders: 6 pcs. Dimensions (L/W/H): 5300 x 1250 x 3330 mm Nodpfxsu Uvalo Abrolc S&S Frame Press Type RP 2000 ----- CE version Robust frame welded construction made of thick-walled special hollow profiles. Sliding carriage and pressure beam with 50 mm hole grid. Continuous left-side abutment for width pressing, lower abutment on two levels. Vertical press cylinders on special pressure beam with single-hand rapid adjustment and weight compensation, height-adjustable in 50 mm increments; long sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment via ball-bearing carriage with central locking, fixing in 50 mm hole grid. Upper horizontal press cylinder infinitely height-adjustable and equipped with weight compensation. Lower horizontal press cylinder with centering bores for both abutment levels, with weight compensation. Abutment and pressure plate depth: 100 mm Pressure plate and support width: 130 mm Machine is electro-hydraulically controlled, with 2 vertical press cylinders, d = 50 mm, stroke 120 mm, double-acting, with weight compensation and single-hand rapid adjustment; 2 horizontal press cylinders, d = 40 mm, stroke 120 mm, double-acting, with weight compensation; 2 manual control valves, manometer, 1 pressure control valve from 20 to 125 bar corresponding to 400 to 2400 kg vertical press pressure, with 3 kW three-phase motor for 400 V, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light grey with RAL 7016 anthracite grey Working size: 4000 mm x 2600 mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine includes the following options: ----- Article ,00 pcs Central pressure beam with press cylinder, double-acting, weight compensation, pressure hose and shut-off valve, up to 2600 mm high Article ,00 pcs Individual pressure control for central pressure beam, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Cross-pressing device complete with press cylinder, double-acting, weight compensation, pressure hose, and shut-off valve; weight compensation at the lower horizontal cylinder omitted Article ,00 pcs Individual pressure control for cross-pressing device, pressure range up to max. 100 bar (for pressing cross-bar windows) Article ,00 pcs Shut-off valve on the 3rd vertical cylinder Article ,00 pcs Shut-off valve on the upper horizontal cylinder Article ,00 pcs Width compensation insert for pressing small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article ,00 pcs Basic equipment for counter profiles (height requirement increases by 100 mm) Article All pressure plates and abutments covered with plastic Article ,00 pcs Triangle studio window pressing device consisting of: locking device for the vertical pressure beams and 3 attachable, laterally guided articulated pressure plates Article ,00 pcs Double articulated pressure plate for special-shaped windows (triangle) ----- Total price for the above configuration ex works: On request! -----

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 530 mm, število rezil rezkalnika: 4, Oprema: motorna zavora, Houfek Planer Thicknesser R 530 - 400V/50Hz, 5.5 kW (7.5 HP), Width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterblock 1.2 Total working table length 3100 mm 1.3 Fence dimensions 1300x150 mm with tiltable auxiliary fence 1.4 Planed table surface 1.5 Top control panel with ELGO Z60 digital display - Electronic adjustment of cutting depth 0 - 7 mm - Tilting range of the tiltable fence 0°- 45° - Digital display - Adjustment of infeed table inclination (concave/convex jointing) 1.6 SUVAMATIC cutterblock guard 1.7 4-knife cutterblock D=120 mm 1.8 Automatic star-delta motor start 1.9 Electromagnetic brake 1.10 Extraction port with outlet D=150 mm 1.11 Knife setting gauge 1.12 Voltage 400V/50Hz 1.13 Standard packaging in PE foil 1.14 Machine built according to CE electrical and safety standards Nljdpfou Rnqqox Abrec

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Nsdjrigxyopfx Abrslc Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Njdju R Szaopfx Abrelc Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: zelo dobro (rabljeno), Spodnja vretenasta rezkalka SCM T150 Premer vretena: 35 mm Skupna dolžina vretena: 180 mm Električni dvig vretena Električni pomik vodila Električno nastavljiv kot -10/45° Spremenljiva hitrost vretena: 3000-4500-6000–7000-10000 vrt/min Moč motorja: 5,5 kW Nljdpfxow Ral Hs Abrec Tehnična dokumentacija DTR

Stanje: rabljeno, številka stroja/vozila: 008027, Maks. obdelovalna širina: 1350 mm Nedowvq E Aopfx Abrslc Min. obdelovalna debelina: 200 mm Delovna miza: fiksna višina Podtlakovni trak: da Število delovnih agregatov: 4 kos

Stanje: dober (rabljeno), Leto izdelave: 2020, Masterwood Project 351 L 3-osiowy CNC Opis Chłodzony powietrzem 3-osiowy elektrowrzeciono frezujące 17,5 KM (HSK-63F) Przemiennik częstotliwości umożliwiający programowanie prędkości obrotowej 1.500–24.000 obr./min Zmieniacz narzędzi na 22 pozycje 6 pneumatycznych, wpuszczanych prowadnic paneli do załadunku/pozycjonowania ciężkich elementów Przygotowane do montażu docisków 2 poziome dociski do drewna klejonego warstwowo 6 punktów bazowych wzdłuż osi X (pozycjonowanie paneli przy tylnej krawędzi podpór) 8 punktów bazowych wzdłuż osi X (pozycjonowanie paneli w połowie długości podpór) Pełne odniesienie po prawej stronie wzdłuż osi Y Pełne odniesienie po lewej stronie wzdłuż osi Y 2 pola robocze 1 x pompa próżniowa 100 m³ 24 przyssawki próżniowe Pilot radiowy z cyfrowym wyświetlaczem Automatyczny system pomiaru narzędzi Taśmociąg do transportu odpadów Agregat wiertarski z 19 wrzecionami (rozstaw 32 mm) 2,2 kW - 7 pionowych wrzecion w kierunku X - 6 pionowych wrzecion w kierunku Y - 4 poziome wrzeciona w kierunku Y - 2 poziome wrzeciona w kierunku X (wszystkie wrzeciona wiertarskie programowane niezależnie) Jednostka sterująca z komputerem PC Oprogramowanie SINCRO CAD/CAM MASTERWORK Njdpfx Asvu U Itobrelc Dane techniczne Zakres roboczy w osi X: 5.130 mm Zakres roboczy w osi Y: 1.550 mm Prędkość w osiach X-Y: 80 m/min Prędkość w osi Z: 25 m/min Maks. grubość obrabianego elementu: 200 mm Moc silnika frezującego: 17,5 KM (S1) Obroty elektrowrzeciona frezującego: 1.500–24.000 obr./min Agregat wiertarski: 3 KM System uchwytów narzędziowych: HSK63-F Zmieniacz narzędzi: 22 pozycje Pompa próżniowa: 100 m³ Średnica króćca odpylającego: 250 mm Wydajność powietrza: 4.500 m³/h Prędkość powietrza: 30 m/s Ciśnienie robocze sprężonego powietrza: 7 bar Zużycie sprężonego powietrza: 300–500 l/min Wartość zabezpieczenia: 40 A Waga: 7.000 kg (Wszelkie zmiany, błędy w danych technicznych, informacjach i cenach zastrzeżone. Dostępność może ulec zmianie. Bez gwarancji na dane drukowane!) Najlepsze maszyny do obróbki drewna z Holandii

Stanje: novo, Število vreten: 6 kos Nljdpfxevnv Ubo Abrsc Delovna širina: 250 mm Višina skobeljenja: 150 mm Dolžina poravnalne mize: 2500 mm Motor za podajanje: 4 kW Hitrost podajanja: 6-24 m/min Teža: 4770 kg Dimenzije (D/Š/V): 4722x1860x1776 mm Štiristranski skobeljni stroj Kuper SWT XL-6 v okenski izvedbi z elektronskim aksialnim in radialnim nastavljanjem vreten. Masivno ogrodje stroja, nepopustljivo in z nizko vibracijo. Število vreten: 6 Delovna širina: 250 mm Delovna višina: 150 mm Dolžina poravnalne mize: 2500 mm Hitrost vreten: frekvenčno krmiljena 4.000 - 8.000 vrt/min Hitrost podajanja: 6-24 m/min Podroben opis najdete v pripeti PDF datoteki! (Tehnični podatki po navedbah proizvajalca - brez garancije!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Nedpfx Abefzzhyjrslc Total price: €17,000. Condition: very good!

Stanje: zelo dobro (rabljeno), skupna dolžina: 3.000 mm, skupna širina: 1.500 mm, Stiskalnica za plošče v zelo dobrem delovnem stanju + finger jointing Grecon Nsdpfot Uduxox Abrjlc