Presejalna naprava za lesne pelete, polmobilna

S&F GmbH

Leto izdelave: 2026, Stanje: novo, Sejalni stroj | Vibracijski sejalni stroj tip ASM-550 Razstavni stroj - Znamka: S&F GmbH - Tip: ASM-550 - Kapaciteta sejanja: pribl. 60–70 m³/h (pri sekancih in žagovini) - Površina sita: 5,4 m² - Frakcije: 3 ali 4 - Sejalna nadstropja: 3 - Pogonska moč: 4,0 kW - Teža stroja: pribl. 3.800 kg - Barva stroja: RAL 6011 reseda zelena - Vložki sita in izpust materiala po izbiri Primeren mdr. za sejanje naslednjih razsutih materialov: - lesni sekanci in sekalni material - žagovina in lesni prah - biomasa - leseni peleti - lesno oglje - odpadni les - lubje Lhedpfx Asxtfv Ijbbjb Vibracijsko sito | sito za sekance | vibracijski sejalni stroj | plansko sito | vibracijsko sito | valjčni separator | sejalni stroj za sekance

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 5.000 kg, dvižna višina: 3.770 mm, skupna dolžina: 5.930 mm, Diesel Forklift Linde H 50D-01/600 Ljdpfxsxd El Rj Abbshb Drive: Diesel Year of manufacture: 2023 Lifting height (mm): 3,770 Load capacity (kg): 5,000

Stanje: novo, Leto izdelave: 2026, Trough conveyor belt | Troughed belt conveyor | Conveyor belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Helical geared motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-angle conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 fir green Lodpfew Ad Rrjx Abbjhb Suitable for, among others, the following bulk materials: Wood chips, sawdust and wood dust, biomass, wood pellets, charcoal, waste wood, bark, earth, humus, recycling material, trimmings, and much more. Accessories (optional): Feed hopper, belt scraper, chassis, drawbar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Stanje: novo, Leto izdelave: 2026, Trough Conveyor Belt | Troughed Belt Conveyor | Conveyor Belt Demonstration machine Manufacturer: S&F GmbH Model: MFB-500/8 Belt width: 500 mm Axle distance (A-A): 8,000 mm Throughput capacity: approx. 30 - 40 m³/h (at 0° incline) Drive: Drum motor Lhedpfx Abjxk Tg Nobeb Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (32 mm) Machine weight: approx. 800 kg Machine color: RAL 6011 reseda green Suitable for, among others, the following bulk materials: Potatoes, wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cutoff pieces, and much more. Accessories (optional): Feed hopper (loading hopper), internal belt scraper, undercarriage, tow bar, steel support, electrical installation (plug switch 16 A) Trough conveyor belt | Troughed belt conveyor | Conveyor belt | Bulk material conveyor | Belt conveyor | Inclined conveyor belt

Stanje: novo, številka stroja/vozila: Baureihe GSE / Neumaschine, Economic Granulators: Ledpfx Abjghgbtobshb This GSE series is ideal for all injection molding and blow molding operations. It is fundamentally suitable for all thin-walled plastic waste. Not only the attractive purchase price, but also the robust, split steel/welded housing, easy cleaning capability, as well as simple knife and screen changes, distinguish these granulators. The tangential housing design, in combination with V-cut rotors (except for the GSE 300/300), ensures that even bulky and large-volume materials are accepted and granulated by the rotor. Granulate Conveying: As standard, the granulators are equipped with an extraction system and bagging station. Optionally, a collection bin for regrind is also available, which, like the extraction tray, is made from stainless materials.

Leto izdelave: 2026, Stanje: novo, Vibrating Screen Machine Series ASM S&F vibrating and flat screens are used in a wide range of applications throughout the wood processing industry (sawmills, pellet plants). The "ASM" series screening machines are used to screen wood chips, wood pellets, sawdust, reclaimed wood, biomass, and many other sawmill by-products in both dry and wet processing environments. The gentle, horizontally circular screening motion of the inclined screen box ensures high separation efficiency of this vibratory classifier. One key advantage is that long and fibrous particles slide diagonally or tangentially over the screen surface. As a result, in contrast with throw screens, there is no risk of clogging or pegging. Further advantages include a robust design, high throughput capacity, and long service life with minimal maintenance requirements. In addition to standard sizes, the company also offers the "ASM" series as a customized split version for existing installations. This allows new screening machines to be integrated even where space is tight or access is restricted, such as in existing plants or sawmills. ASM screening machines provide screening areas from 0.5 to 15 m² (per deck) and are characterized by high throughput capacities (up to 350 m³/h, depending on material). At a glance: - Ideal for: wood chips, pellets, sawdust, biomass, bark, reclaimed wood, substitute fuels - Application areas: wood industry, recycling & disposal, animal feed Lhedpfx Aein Ey Sjbbob - Screening area: 0.5 – 15 m² (up to 30 m² as a double-deck version) - Throughput (material-dependent): up to 350 m³/h - Separation size: 0.1 – 150 mm (dependent on machine size) - Drive power: 0.55 – 15.0 kW (dependent on machine size) Advantages: - High throughput - High separation efficiency - No clogging or pegging - Quiet and low-maintenance operation - Versatile - Customized manufacturing Need more information? Contact us! We are happy to advise you.

Leto izdelave: 2025, Stanje: novo, Screening plant for loading wood pellets, stationary New manufacture Screening capacity: 10 - 50 t/h (depending on configuration) Comprising: - Modular silo - Screening machine type ASM - Conveyor belt type MFB incl. magnetic separator - Loading set // MODULFLEX loader - Tubular screw conveyor (optional) - De-dusting unit (optional) Functional description and operation: The pellets are fed into the modular silo by wheel loader. The pellets are then conveyed onto the ASM vibrating screening machine. The screening machine separates the pellets into two fractions (pellets and fines). The screened pellets are loaded into the silo vehicle using a trough belt conveyor and loading set. Thanks to the integrated level sensor in the loading assembly, the system automatically switches off once the silo vehicle is sufficiently filled. Fines are discharged via a screw conveyor. To minimize dust exposure, the screening plant can be equipped with an additional NE de-dusting unit. Depending on the configuration, the screening plant achieves a throughput of between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening performance - Precise separation - Low noise and low maintenance Lhodpfxjinkw As Abbsb - Flexible application - Custom manufacture Do you require further information? Please contact us! We will be happy to advise you. We look forward to your enquiry!

Leto izdelave: 2008, Stanje: zelo dobro (rabljeno), Vibratory Trough / Shaking Trough by Mogensen Excellent condition – barely used 4 units available Length: 1150 mm Width: 530 mm Ledpfomf Tk Aox Abbshb

Leto izdelave: 2026, Stanje: novo, Screening plant for wood chip screening Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on model) Comprising: - Vibrating feeder bunker type AVB Lhedpfx Abjin Ewlebob - Screening machine type ASM - Subframe / hook lift (optional) - Conveyor belt type MFB - Electrical installation Function and operation: The wood chips are loaded into the vibrating feeder bunker with a wheel loader. They are then fed onto the vibrating screening machine type ASM. The screening machine separates the wood chips into three size fractions (oversize, chips, dust). The discharge of the fractions is handled by conveyor belts. Depending on the model, the screening plant achieves a capacity of 20 to 40 m³/h for wood chips. Advantages: - High screening capacity - High separation precision - Low noise and low maintenance - Flexible application - Custom manufacturing Do you require further information? Contact us! We will be happy to advise you.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, S&F Drum Chipper Type ATH 220x530/3 Demonstration / Trade Show / New Machine Robust construction for long service life Infeed height: 200 mm Infeed width: 500 mm Number of chipping knives: 2 pcs Number of counterknives: 1 pc Rotor diameter: 520 mm (solid steel rotor) Number of infeed rollers: 3 pcs Throughput capacity: up to approx. 20 stacked cubic meters/hour* Chip length: approx. 30 mm Chipper drive power: 45 kW or as agreed Infeed roller drive power: 2 x 2.2 kW Operating/control voltage: 400/220 V, 50 Hz Weight: 2,600 kg *Depending on chip length, main motor kW, number of knives, and infeed method S&F chippers and drum chippers with horizontal infeed are used in many sectors of the wood processing industry (sawmills, timber plants). The “ATH” series chippers produce high-quality, homogeneous wood chips with low fines content from wood residues, e.g., as premium chips for the pulp industry or as fuel chips for energy generation. Lhsdow I R Rnjpfx Abbsb Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible application - Custom manufacturing Do you need further information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Shredder

Leto izdelave: 2011, Stanje: dober (rabljeno), • Shredding system, single-shaft shredder, shredder, chopper, cutting mill, single-shaft breaker, rotor mill - Shredding system: constructed entirely from stainless steel, suitable for frozen meat or other materials - Motor power: 4 kW - Speed: approx. 60 rpm Lodeh Di H Dopfx Abbjhb - Number of cutting blades: 10 pieces - Blade dimensions: 250 mm - Feed hopper: 500 x 895 x H480 mm - Dimensions: 880/1390/H2060 mm - Weight: 640 kg

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chipping machines and drum chippers with horizontal feed are widely used throughout the wood processing industry (sawmills, timber plants). Chippers of the "ATH" series produce high-quality, homogeneous wood chips from residual timber with a low proportion of fines—for example, as premium chips for the pulp industry or fuel chips for energy generation. Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 units - Number of counter knives: 2 units - Rotor diameter: 520 mm - Number of feed rollers: 3 units - Throughput capacity: up to approx. 40 loose cubic meters/hour * - Chip length: 5 - 50 mm - Main drive power: 22 - 110 kW - Feed roller drive power: 2 x 2.2 kW - Operating/Control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *Depending on chip length, kW of main motor, number of knives, and material feed. Advantages: - Maximum throughput - Low fines content - Low-maintenance - Versatile application - Custom manufacturing Need more information? Contact us! We are happy to advise you. Drum Chipper | Wood Chipper | Chipper | Chipping Machine | Wood Chipping Machine | Shredder | Wood Crusher Lsdpfx Abowbv Erobehb

Stanje: novo, Leto izdelave: 2026, Drum Chipper Series ATH 300 S&F chippers and drum chippers with horizontal feed are used in many sectors of the wood processing industry (sawmills, wood factories). Chippers of the "ATH" series produce high-quality, homogeneous wood chips with a low proportion of fines from residual wood, e.g. as premium wood chips for the pulp industry or as fuel chips for energy generation. Series ATH 300 - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pcs - Number of counter knives: 2 pcs - Rotor diameter: 700 mm - Number of feed rollers: 3 pcs - Throughput capacity: up to approx. 70 cubic meters/h * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Feed roller drive power: 2 x 3.0 kW - Operating / control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, main motor kW, number of knives, feeding Advantages: - Maximum throughput - Low proportion of fines - Low maintenance - Versatile applications - Custom manufacture Do you need more information? Contact us! We are happy to advise you. Lodpjuz Hmxsfx Abbehb Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood crusher

Leto izdelave: 2024, Stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume Lhsdpsff Sbisfx Abbsb - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm