Okvir pritisnite

S&S T 35

Stanje: rabljeno, Leto izdelave: 1985, Teža: cca 3000 kg Dimenzije: cca 3700 x 2000 x 1600 mm Lokacija skladišča: Nattheim Kodpfx Afevvi Tte Todg

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.650 mm, skupna širina: 1.255 mm, skupna višina: 6.030 mm, Uporabe in prednosti za stranke: Učinkovito ravnanje z biomaso za pelete in lesne sekance – idealno za polnjenje skladiščnih prostorov z zanesljivim, neprekinjenim transportom. Stranke imajo koristi od enakomerne razporeditve goriva, prilagodljivih možnosti nakladanja in zmanjšane ročne dejavnosti. Ključne značilnosti: Kdjdpfx Afew Ugars Tsg • Robusten polžasti transporter z okrepljenim zalogovnikom • Nastavljiva pokrivna plošča za optimalno hitrost doziranja • Prilagodljive konfiguracije za različne postavitve skladišč • Zanesljivo delovanje z minimalnim vzdrževanjem Tehnični poudarki: D 7,65 m · V 6,03 m · Š 1,25 m

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • V skladu s CE standardi. • Stroj lahko reže pod kotom +45, -45 ter vmesne kote. • Hitre nastavitvene omejitve za 90, 75, 60 in 45 stopinj • Ročica za pritrditev mize za vmesne kote • Pnevmatski sistem za vpenjanje profila, praktična uporaba. • Premer diamantne žage je Ø400 mm. • Standardno opremljena z merilnim in transportnim trakom (po 2,5 m na levi in desni strani) Kdedpfx Aferamzuj Tog • Hladilna naprava za rezanje aluminijastih profilov • Možnost dela z digitalnim metrom OPCIJA • Valjčni transportni sistem (po 3 m na levi in desni strani)

Stanje: novo, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Outstanding compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed Features: Compression Concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-adjusted via frequency inverter Controller: Graphic control unit C55DD Refrigerated Dryer: Integrated, refrigerant R513A Filtration: Includes cyclone separator Tank: Horizontal, painted Performance Data: Kedpoixt I Hjfx Af Todg Volume flow at 7.0 bar operating pressure: 0.26–2.26 m³/min Operating pressure min./max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil volume: 5.2 liters Dimensions and Weight: L x W x H: 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air tank capacity: 270 liters

Leto izdelave: 1999, Stanje: potreben popravila (rabljeno), številka stroja/vozila: AL 1 / 99, Connection: 9.0 kW, 400 V Compressed air connection: 6 bar Extraction: 1 x 160 mm, 3400 m³/h, 30 m/sec Compressed air consumption: 200 NL/min Drilling spindles: 9 units / 3000 rpm Grooving cutter: 1 unit / 6000 rpm Milling spindle: 1 unit / 16000 rpm Dimensions (LxWxH): 4050 x 2050 x 1900 mm Kjdpfx Asiiy E Tof Tsdg Weight: approx. 1500 kg Max. panel thickness: 55 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.300 mm, dolžina pomika po osi Y: 4.300 mm, dolžina rezanja (maks.): 4.300 mm, višina reza z zareznim rezilom (max.): 4.300 mm, premer žaginega lista: 380 mm, HPP 380/43/43, popolnoma avtomatsko nalaganje s TBP 200/31/22/ Glavni motor 18,5 kW Stroj deluje odlično, možen preizkus delovanja Holzma Profi HPP 380 Dolžina reza: 4.300 mm Širina reza (programsko voden pomik potiskača): 4.250 mm Miza z zračno blazino: 2.160 x 650 mm, 3 kos + 1* 2.810 mm dolžine Centralni puhalnik: 1 enota z izboljšano zmogljivostjo puhanja 2 dodatni napravi za poravnavanje Tehnični podatki: Kodpfexvz T Isx Af Tedg Izvlek žaginega lista: 95 mm Podajanje vozička žage: naprej 1–130 m/min, nazaj stalno 130 m/min Glavni motor žage: 18 kW Predrezovalni motor: 2,2 kW, VVSH agregat, programsko voden, vertikalno dvižen Obratovalna napetost: 400 V (+10%/-5%) / 50 Hz Električna priključna moč za glavni motor žage 18 kW: 24 kW Krmiljenje Power Control CADmatic 4.0 s 17-palčnim ravnim zaslonom Označevanje z grafiko kosov / program etikete / tiskalnik etiket PICA 104

Stanje: novo, Leto izdelave: 2025, PREMIUM VERSION MODELS ARE CHARACTERISED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, OPERATING WITH FULL INTERPOLATION ON EACH X, Y, AND Z AXIS. The machine comes with an "Innovation Opinion" certificate, which facilitates financing the purchase with EU funds. Digital Signal Processing. The plotter with a working area of 1220x1230 ensures smooth operation and high machining accuracy. The controller’s built-in memory allows the machine to operate without the need to upload the program each time. The spindle construction incorporates high-quality machine bearings, ensuring exceptionally quiet operation and increased durability. The Premium version meets the expectations of both individual users and companies with a high workload. Training for each machine is included in the price at our headquarters! Technical parameters: Spindle: 3.7kW / 18,000 rpm, inverter, air-cooled Working area: 1230x1220x210 mm Control: DSP Software resolution: 0.001 mm Power supply: 400V Weight: 450 kg Machine dimensions: 2000x1800x1640 mm Table height: 715 mm Kdsdpfx Afoiz Avvs Tsg Linear guides Drive transmission: rack and pinion (Z axis – ball screw) ATTENTION! The machine is equipped with a function that memorises the last G-code path. In case of a failure or power interruption, it resumes operation from the last point, saving time and material. Equipment included: - Levelling feet - Hose - Clamping brackets - Screws - Wrenches - 2 boxes of cutters - Collets 1/8, 1/2, and 5-6 mm For more information, please contact us.

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Kodjwx Aaqepfx Af Tedg Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Kdsdpfjvqbh Eox Af Teg

Stanje: rabljeno, Working width: 1350 mm Number of sanding units: 2 pcs. Maximum workpiece thickness: 160 mm Sanding belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT: ROLLER 2ND BELT: COMBINATION UNIT (ROLLER/PAD) SUITABLE FOR SOLID WOOD, VENEER, AND INTERMEDIATE COATING SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 x 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Continuously adjustable feed conveyor with variable speed: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION: ECO GEAR PATENT SYSTEM - 1 PC. DRUM BRAKE for belt stop - Swiveling ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP STRIP at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER CONVEYORS, each with 2 rollers at infeed and outfeed - AUTOMATIC CENTRING OF FEED CONVEYOR - 1 EXTRACTION CONNECTION, 160 mm diameter - AUTOMATIC TABLE POSITIONING IMPORTANT: New patented belt oscillation system 1. No valves 2. No photo sensors 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Kdodpfx Aormucxof Tjg Since 2008, the machine model with this system has operated continuously without lateral belt tracking issues! - Unitek steel calibrating roller (same for all models) - Unitek flexible pressure shoe before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set, 6 positions (per pc., same for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width: 1350 mm) - Unitek belt motor upgrade to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor: 14.7 kW (for Excel 2-belt only) - Unitek automatic table lowering in case of emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed or outfeed conveyor with 4 rollers (same for all models) - Price per roller conveyor - Unitek electronic control of machine functions with 12'' touchscreen (same for all models) Automatic workpiece sensing with feed motor control ----- Machine price for the above configuration on request! ----- Optional items at extra cost: Surcharge for 3-belt machine (roller-roller-pad, Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and user training: EUR 1,300.00 ----- All prices are net plus 19% statutory VAT. ----- (Technical data according to manufacturer's information – no liability assumed!)