Ats Omara Za Stiskalnico Tipa B nakup rabljenega (113.090)

Stanje: novo, Leto izdelave: 2026, Popolnoma avtomatski razrez jekla majhnih in srednjih dimenzij z enostavno uporabo avtomatizacije. Odložite katerikoli kos jekla, ki ga želite razrezati, stroj ga samodejno zazna in razreže na kose, kjer je za visoko natančno pozicioniranje materiala uporabljen servo motor. Uvoz Excelovih seznamov opravil preko WIFI za poenostavljen vnos obsežnih seznamov rezov. Servo gnano upravljanje žage s pomočjo industrijskega vijačnega aktuatorja. Samodejno zaznavanje prisotnega jekla s strani stroja, ki nato nastavi začetno točko reza za minimalen hod in čas reza. Niso potrebni nobeni mejni senzorji ali poseg operaterja. Za vsak kos jekla, ki ga položite za rezanje, ne glede na dolžino, laserski senzor izmeri njegovo dolžino. Naš zmogljiv optimizacijski algoritem sproti izračuna najboljši vrstni red delov, da zagotovi minimalne odpadke. Stroj samodejno reže po izračunanem seznamu brez prekinitve. Od vas ni zahtevan noben vnos – le dovajajte nov material. Enostavna in hitra alternativa dvoglavim žagam. Vnesite (ali uvozite) dolžine in kote reza ter pritisnite START. Stroj neprekinjeno proizvaja natančno odrezane kose pod kotom in pri veliki hitrosti. • Popolnoma avtomatsko rezanje z avtomatskim pomikom in rezanjem na dolžino. • Enostaven uporabniški vmesnik za avtomatsko delovanje, vnos naloge in zagon v nekaj sekundah. • Poenostavljeno rezanje serij, posamičnih ali večjih excelovih seznamov. • Oddaljen uvoz excelovih seznamov preko WIFI z obsežnimi zmožnostmi mapiranja podatkov. • Samodejni izpis nalepk za izdelke z uporabo podatkov iz seznama opravil (ročna aplikacija nalepk, opcijsko). • Popolnoma nastavljivi hitrost reza in pomika materiala za maksimalno produktivnost procesa. • Samodejno zaznavanje velikosti materiala za nastavitev minimalnega hoda in časa reza. • Zaznavanje zatikanja žaginega lista in avtomatska povratna zanka za odpravo težave. • Visokotlačni, visoko zmogljiv, tesen hladilni in odtočni sistem brez puščanja. • Avtomatsko servo pozicioniranje kota žaginega lista do ±45° (opcijsko) Zelo primerno za: • Jeklarsko proizvodnjo • Proizvodnjo kmetijske opreme • Proizvodnjo počitniških prikolic in prikolic • Proizvodnjo vrat in ograj • Maloprodajo jekla Model: S400 Dolžina: 3 m Linearni sistem: ProfiStop Alpha Dolžina materiala: 1680 mm Potisna zmogljivost: 20 – 40 kg Hnjdsmdq S Dspfx Ah Hst Programska oprema: Optimiser KAKOVOSTNI STROJI – PROIZVEDENO V AVSTRALIJI.

Stanje: dober (rabljeno), APC revolverna žaga, novejše izvedbe. Doslej uporabljena za razrez zamrznjenih hrbtnih (loin) kosov na zrezke. Hnjdpfx Ahstq A Nxs Hst

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 39.687 h, Funkcionalnost: popolnoma funkcionalen, Bruderer BSTA 200 High-performance stamping press. Maximum force: 200 kN (20 t) Speed range: 100 – 600 spm Year of manufacture: 1990. BBV feed unit on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Slide adjustment: 51 mm Hnedpfetraadox Ah Hst Clamping plate dimensions: 510 x 400 mm Bed opening: 400 x 160 mm Maximum tool width clearance between columns: 410 mm. Connected load: 36 kVA Power supply: 400 V, 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Control cabinet and controller included. All original technical documentation included. Also available in stock: High-speed presses by Mabu, Schaal, Bihler, and other Bruderer models.

Stanje: zelo dobro (rabljeno), Manufacturer: Zebra Model: 110PAX4 The product is supplied with complete documentation and software. If you have any questions, please contact us by phone or email. Hnjdpfx Ahjtrly Ds Hjt Best regards, centralgep.hu Team

Stanje: rabljeno, Sesalni filter za odsesavanje oblancev, z avtomatskim čiščenjem filtrov (protitočni izpih z izpihovalnimi šobami in upravljanjem Macair), z enim vrečem. Motorizirano pometalno vozilo, po izbiri, Euro 500 + DDV Moč sesalnega motorja: 4 kW Dimenzije filtrov: Glavna cev, premer 250 mm; razvejitve po 150 mm vsaka Hnjdetxdpxjpfx Ah Hot

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards • Corner crimping machine designed for joining aluminum profiles at 90 degrees • Equipped with 2 pneumatic top clamps and pneumatic knife movement • Features a millimeter ruler system for adjusting knife height and stroke Hsdpfsrbiv Ajx Ah Hont • Automatic center positioning square stop • Equipped with a release button for precise adjustments • Uses 2 pedals to operate pneumatic clamps for securing the profile • Polyamide plate prevents damage to profile surfaces • Side support arms available

Leto izdelave: 2022, stanje: novo, The semi-automatic Pneumatico PT-2800 assembly table is ideal for the production of pallets in various sizes. Its design allows for quick and easy adjustment of the dimensions of the pallets to be assembled, enabling the manufacture of small series batches. Operation of the table requires one operator, who can stack between 180 and 210 pallets in an 8-hour shift, depending on skill and work organization. Two nailers for different nail lengths are suspended on spring balancers, ensuring ergonomic working conditions. Pneumatic clamps position blocks and stringers precisely, resulting in higher quality and repeatability for specific pallet sizes. Pneumatic lifting of the pallet makes the entire process less tiring for the operator. • Work ergonomics: 180 to 210 pallets in an 8-hour shift by a single operator • Compact design: Table area only 4.94 m² (53.17 ft²) • Versatility: Adjustable worktable enables production of EUR-pallets, and 2, 3, 4, or 5-stringer pallets • Time savings: fast changeover to other pallet sizes • Pneumatic clamping: precise centering of blocks possible • Pneumatic pallet ejection: relieves operator fatigue • Boom with balancers: smooth nailer movement during operation • Additional jig: option for manufacturing deck boards Hnjdjht E T Rjpfx Ah Hjt • Adjustable steel anvils: for bending smooth nails during pallet assembly • Innovation: The diagonal table adjustment module reduces working time by 50% Produced pallet dimensions: • Width: 900 – 2800 mm • Length: 1500 mm

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC Hodpfxog Urn Ej Ah Hjnt - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Hodpfxogpxc Sj Ah Hjnt Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling Hnjdpfxjgwt Rye Ah Hst • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: skoraj kot novo (rabljeno), Kompletno izrađena od posebnog nehrđajućeg čelika Specijalizovana za mljevenje blokova sira i polutvrdog sira Promjer rupičaste ploče: 200 mm Kapacitet lijevka: cca 400 litara Sinkronizirana brzina mješača i puža za uvlačenje Radni puž Hedpfepgnftsx Ah Hsnt Dimenzije stroja u cm: Širina: 215,0 Dubina: 150,0 Visina: 196,0 Snaga glavnog motora: 45 kW Ugrađena snaga cca 65 kW Napon: 380 V, 50 Hz

Stanje: zelo dobro (rabljeno), Weiss SC 1000/+20 IU Corrosion-Climate Alternating Test Chamber Weiss SC 1000/+20 JU Corrosion-Climate Alternating Test Chamber The test system combines a climate test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. In accelerated testing, susceptible metallic components are inspected for corrosion in accordance with relevant standards. Temperature Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K Climate Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K relative humidity: 10...98 % r.h. temporal humidity deviation: 3...5 % r.h. dew point: +12 °C ... +59 °C Salt Spray Test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt mist via 2-substance nozzle, 1.5 x 0.5 m V80 cm³/h) Control Digital measuring and control system SIMCON/32*-Net with touch control panel Interfaces - serial interface RS 232 C - parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Climate mode - Salt spray test - Direct spraying with saline solution - Condensation water load - Rinsing of test chamber walls - Drying/ventilation of the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measurement device tft’ (with forced humidification) Technical Data SC 1000/+20 JU Internal dimensions Height up to eaves approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including aggregate parts and control cabinet Height approx. 2100 mm Hodpoph U Dhofx Ah Hsnt Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected load: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 15005225, Automatic Banding Machine HIMA BA 30/800 Year of Manufacture: 10/2004 - Serial No. 15005.225 Suitable for coated kraft paper or plastic film Hnjdpfx Ajn Aw Ucsh Hjt Technical specifications: - Output: up to 23 cycles per minute - Width of banded product: 30 - 310 mm - Stack height: 3 - 200 mm - Band width: 30 mm Triggering of cycle: – Manual / Start button – Foot actuator – Automatic mode button Online video inspection possible via Skype We would be pleased to welcome your visit – more machines available in stock Available immediately – Inspection possible Located in Emskirchen / Nuremberg – Testing possible on site

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning Hnodpfopa Nxaex Ah Hot - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed Hnodpepa Nxdofx Ah Hjt 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 2018, stanje: dober (rabljeno), Belshaw Mark VI avtomatska cvrtnica za krofe Serijska številka: 22682 Leto izdelave: 2018, avtomatska cvrtnica za krofe s 4 vrstami, kapaciteta nad 1000 krofov na uro, nastavljiva hitrost, časovnik in regulacija temperature, z dovodnim transporterjem, 1-fazni priklop. Hnsdpfsqnvyyox Ah Hot

Stanje: rabljeno, Column-guided semi-automatic bandsaw METORA - KALTENBACH Type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028 Year of manufacture: approx. 1993 Cutting range round: Ø 380 mm Square: 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Blade speed: 25–108 m/min, stepless Material infeed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor power: 4 kW Power supply: 400 Volt, 50 Hz - Fully hydraulic bandsaw with twin-column design - Hydraulic saw frame lowering with stepless cutting pressure adjustment - Steplessly adjustable lowering speed - Hydraulic vice clamping with hydraulic top bundle clamping Hnjdpfx Ahsdzqtgs Hst - Hydraulic unit integrated into the machine base - Material feed roller on infeed side with gear motor (not mounted on machine frame) - Coolant system with coolant pump for water-emulsion - Minimum quantity lubrication for the saw blade - Electric heating cartridge for coolant and hydraulics - Length stop TRENNJAGER Type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop total length: 6750 mm, stop travel: 5650 mm, stop arm hydraulically foldable Without roller conveyor Floor space required (L x W x H): 2800 x 1400 x 2450 mm Weight of machine: approx. 3 t Weight of stop system: approx. 800 kg In good condition

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm Hnsdpfxet Hwz Ne Ah Hst gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm mit Aufspannplatte – 340 – 530 mm Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.

Stanje: rabljeno, Polavtomatski stroj za pihanje PET plastenk Proizvajalec: FERENC Tip: F-1400 Leto proizvodnje: 2006 Kapaciteta: cca 800 kosov/uro Hnedpougu E Rsfx Ah Hjt Število orodij v stroju: 2 x 5 L (pokrivka 48 mm) Dimenzije peči: - dolžina: 900 mm - širina: 900 mm - višina: 1200 mm Dimenzije pihalnega stroja: - dolžina: 1800 mm - širina: 750 mm - višina: 2000 mm Teža kompleta: 1200 kg Tehnično stanje: rabljeni stroj

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Žaga z listom VHM/HSS: maks. 425 mm Moč pogona: - Dvozstopenjski z verigo: 1,7/2,6 kW, - Dvozstopenjski z remenico: 3,7/4,5 kW Hitrost rezanja žage (400 mm): - dvozstopenjski z verigo: 10/20 m/min, 13/26 m/min, 15/30 m/min - dvozstopenjski z remenico: 20/40 m/min, 30/60 m/min Nastavitev višine reza je brezstopenjska in v celoti elektronska. Delovni obseg, pravokotni profil 90° maks.: 120 x 120 mm 45° maks.: Delovni obseg, ploščati profil: 90° maks.: 230 x 80 mm 45° maks.: Delovni obseg, okrogli profil: 90° maks.: 140 mm 45° maks.: Dolžina podajanja, enojni hod: 5–1000 mm Večji hod: 5–9999 mm Hitrost podajanja, AC-servo maks.: 500 mm/s Teža (žaga): približno 3100 kg Dimenzije (Žaga) DxŠxV: približno 2500 mm x 1300 mm x 2100 mm Površina za postavitev DxŠ: 2500 mm x 1300 mm Zaradi svoje opreme in konstrukcije je stroj zelo učinkovit za široko paleto uporabe. HMI vmesnik za upravljanje stroja zagotavlja enostavno in brezhibno upravljanje. Zaradi konstrukcije žage je mogoče doseči zelo natančno toleranco dolžine. Stroj bo na zahtevo stranke pri nas generalno obnovljen. Med drugim bodo obnovljeni naslednji elementi: - Prehod na nadzorni sistem Siemens S7 SPS - Prehod na nadzorno ploščo Siemens HMI - Zamenjava vretena z krogličnim vijakom - Zamenjava servomotorja in servo-pogona - Zamenjava frekvenčnega pretvornika za glavni pogon žage - Nove elektronske komponente - Vzdrževanje oz. zamenjava vseh hidravličnih cilindrov in ventilskih blokov - Optimizacija in prenova hladilnega sistema - Zamenjava splošnih delov, ki se obrabljajo - Prenova ohišja stroja Stroj ima dodatno: - Popolnoma avtomatsko podajanje - Popolnoma avtomatsko nastavitev kota +/- 60° Garancija: Za naše stroje, če ni dogovorjeno drugače, nudimo 6-mesečno garancijo za vse dele, ki smo jih obnovili oz. zamenjali. Garancija ne velja za delovni čas in dele, ki se obrabljajo. Neobvezna oprema: Hodpfx Asuiy R Reh Hjnt - Strgalo za odrezke - Podaljšana enota za podajanje, 2000 mm - Shramba verige za 6 m materiala - Sistem za odvajanje in razvrščanje odrezkov - Sistem za odvajanje in razvrščanje odrezkov ter omogočanje večkratnega obrezovanja na koncu obdelovanca - Dostava in namestitev v vašem obratu - Izobraževanje vaših zaposlenih

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 131 153, Press force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Hedpfxeuqc Age Ah Hjnt Installation height (stroke down, adjustment up): 310 mm Distance between uprights L-R: 820 mm Table clamping surface approx.: 810 x 450 mm Ram clamping surface approx.: 720 x 350 mm Through-hole in table: 600 x 110 mm Strokes per minute: 100 - 1,000 min⁻¹ Table height above floor: 1,030 mm Power requirement: 19.5 kW Machine weight approx.: 6.8 t Additional equipment

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 131 542, Pressing force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Shut height (stroke bottom, adjustment top): 290 mm Distance between uprights (L-R): 600 mm Distance between uprights (sideways): 190 mm Table clamping surface approx.: 600 x 500 mm Ram clamping surface approx.: 600 x 400 mm Pass-through opening in table: 500 x 110 mm Strokes per minute: 65 - 400 min-1 Table height above floor: 1100 mm Power requirement: 32 kW Height above floor approx.: 2,800 mm Machine weight approx.: 6.2 t Additional equipment: Hnsdouqc Ezjpfx Ah Het The machine was retrofitted with a roller feed in 2002 Model MWVL-200, year of manufacture 2002

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 1377, STROMAB TR 500 PNEUMATIC CROSSCUT SAW – CE STANDARD – USED - Equipped with TIGERSTOP electronic positioning stop, 4000mm - Infeed roller table, 4500mm - Outfeed roller table, 4500mm - Blade diameter: 500 mm - Maximum cutting capacity: 360 mm (width) x 60 mm (height), 135 mm (height) x 280 mm (width) Hjdpfx Ahjt U Izpe Hjnt - Motor: 10 hp - 415 volt - Serial no.: 1377 - Year: 2007

Stanje: dober (rabljeno), Leto izdelave: 1998, Semi-automatic circular saw machine Manufacturer: KASTO Type: V350 U Year: 1998 with miter cutting, roller conveyor and stop Hsdpjfym Ewofx Ah Hsnt Saw blade diameter: 350 mm Pneumatic vice and saw feed Infinitely variable. Machine with low usage, in good condition.

Stanje: novo, Leto izdelave: 2026, Komplett automatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit bedienerfreundlicher Automatisierung. Legen Sie einfach ein Aluminiumprofil auf, die Maschine erkennt dieses automatisch und schneidet es positionsgenau durch servomotorische Materialzuführung in die zuvor definierten Aufträge. Schneidlisten können per Excel-Jobliste und WIFI sehr einfach und effizient eingespielt werden – ideal zur Verarbeitung großer Stücklisten. Für jedes zu schneidende Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die exakte Länge. Unser leistungsfähiger Optimierungsalgorithmus berechnet in Echtzeit die optimale Schnittreihenfolge zur Minimierung des Materialverschnitts. Die Maschine führt die berechnete Schnittliste vollautomatisch und ohne Unterbrechung aus. Es sind keine weiteren Eingaben oder Bedienhandlungen notwendig – legen Sie einfach das nächste Profil ein. Einfaches, schnelles Alternativsystem zu klassischen Doppelgehrungssägen. Geben Sie nur die gewünschten Längen und Winkel ein oder importieren Sie diese, und starten Sie den automatisierten Schneidprozess. Die Maschine fertigt Ihre Gehrungsteile kontinuierlich, hochpräzise und mit hoher Geschwindigkeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den automatischen Betrieb, Auftrag eingeben und in Sekunden starten • Vereinfachte Bearbeitung von Einzelteilen, Batches oder umfangreichen Excel-Stücklisten • Bündel-/Mehrfachprofilzuschnitt mit automatischer Stückzählung • Ferneingabe von Excel-Joblisten per WIFI inklusive umfangreicher Datenzuordnung • Komplett einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Prozessproduktivität • Automatischer Optimiermodus mit Laserlängenmessung und Verschnittminimierung (optional) Hnjdpfef Ekn Dex Ah Hot • Automatische Etikettierung der Zuschnitte anhand der Jobdaten (Etikettenanbringung manuell, optional) • Online-Direktdruck der Teilebezeichnung direkt auf das Material ohne Bedienereingriff (optional) • Barcodes oder QR-Codes zum Drucken oder Scannen bei der Auftragseingabe (optional) • Automatische servo-gesteuerte Positionierung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Fenster- und Türenfertigung • Herstellung von auf Gehrung gearbeiteten Aluminiumkonstruktionen • Herstellung von Aluminium-Bauteilen • Composite-Fertigung • Herstellung von Jalousien, Beschattungselementen und Möbeln • Aluminiumhandel und Einzelverkauf Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkapazität: 20 – 40 kg Software: Optimiser QUALITÄT AUS AUSTRALIEN – MADE IN AUSTRALIA.