Schiller Automatisierungstechnik Gmbh Greifer Portalkran, Kran nakup rabljenega (69.624)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Nwedeyz Af Eopfx Agxef Your service team, Mertens & Frowein GmbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 28 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2380029, skupna višina: 2.600 mm, skupna širina: 1.500 mm, skupna dolžina: 3.410 mm, skupna masa: 4.200 kg, premer rotorja: 330 mm, vrsta vhodnega toka: Klimatska naprava, dolžina rotorja: 800 mm, moč: 30 kW (40,79 KM), Function: The input material is drawn in by two slow-running, counter-rotating shafts (resulting in low dust and noise emissions), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. Should the machine become overloaded or foreign objects enter the cutting mechanism, the control system reverses operation. The precise cutting gap of the cutter discs ensures energy-efficient shredding of the material. The mounted clearing comb prevents wrapping and uplift of the material being shredded. The width of the blades and the number of cutting edges determine the output size of the shredded material. Applications: This robust and heavy-duty machine, designed for maximum durability, enables the cost-effective shredding of not only special waste, metal chips, electronic scrap, and steel drums, but also various containers filled with liquids. All types of industrial waste, steel and plastic containers Production waste, file folders, paper, cardboard Nwjdpfx Agsyw N Acoxef Electronic scrap, electric cables, metal chips Food, kitchen waste, biogenic waste, wood Glass, plastics, various liquid-filled containers, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Option not included in the price: Control cabinet incl. control system Nwedpfx Agot S Rduoxef Delivery: EXW

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Nedpfshx Elfox Agxjwf Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: GP147/147.2/147.3/58, 1 Vetter stenski vrtljivi žerjav, nosilnost / dvižna zmogljivost 500 KG Na voljo so 4 žerjavi! Njdpfx Agoy D D Imoxswf Tip PW2,5-4.0 Izvlek ca. 4 m, nosilnost 500KG - 0,5 t S verižnim dvigalom, nosilnost 500KG (2 hitrosti dviga) Skupna teža približno 500 kg Letnik 1999 Popoln komplet z nosilno konzolo, iztegnjenim krakom, verižnim dvigalom, kabelsko verigo, podvozjem in drobnim materialom Kot vrtenja ca. 180° Lokacija artikla: 75053 Gondelsheim Naprava je popolnoma razstavljena in takoj na voljo V celoti delujoče stanje Oglejte si slike Pošiljanje s špedicijo ali osebni prevzem Stroške dostave vprašajte glede na poštno številko

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, številka stroja/vozila: GP55/179, 1 Vetter stenski vrtljivi žerjav 500 KG nosilnosti / dvižne zmogljivosti Na voljo sta 2 kosa! Tip: PW2,5-5,5 Izmet cca 5,5 m, 500KG - 0,5t nosilnosti Z verižnim dvigalom, nosilnost 500KG (2 hitrosti dviga) Celotna teža cca 500 kg Leto izdelave: 2001 Komplet z zidno konzolo, izmetom, verižnim dvigalom, vodilom za kable, vozilcem in drobnim materialom Kot vrtenja cca 180° Nwedsy D D Hcopfx Agxsf Lokacija artikla: 75053 Gondelsheim Naprava je popolnoma demontirana in takoj na razpolago Popolnoma funkcionalno stanje Glej slike Dostava preko špediterja ali osebni prevzem Stroške dostave prosimo povprašajte glede na poštno številko

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, številka stroja/vozila: GP3180, Tehnični podatki: 1x Demag KBK 2 stebrno vrtilno dvigalo NL 500KG Nosilnost pri polnem iztegu 500KG Višina: ca. 3,5 + 0,3m povišanje stebra Spodnji rob iztega: ca. 3,3m Izteg: 3m Višina kljuke: ca. 2,9m Skupna teža ca. 600KG z verižnim dvigalom Liftket 500Kg, letnik 2012 Nwodpfx Agsy D D Adoxjf vklj. zatič, kabelski nosilec, voziček, končna kapa itd. Območje vrtenja 300°, priklop na 400V 16A Dvigalo je razstavljeno in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so še druga dvigala, nosilnost 80-5000Kg, povprašajte Glej slike Dostava po špediterju ali osebni prevzem po dogovoru

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: GP3159, Tehnični podatki: 1 Demag M10-4,5 stebrno vrtljivi žerjav, nazivna nosilnost 1000 kg Nosilnost pri polnem iztegu: 1000 kg / 1 t Višina: cca 4,4 m, spodnji rob iztegnjenega kraka: cca 4 m Iztegnjenost: cca 4,25 m, višina kljuke: cca 3,55 m Sidrna plošča 140x140 cm Nwsdjy D Dy Ajpfx Agxef Skupna teža cca 950 kg S 1000 kg verižnim dvigalom z daljinskim upravljanjem, voznim in vrtljivim pogonom (2 hitrosti dviga) Priklop na 400 V, 16 A, kot vrtenja 360° Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Prodaja se izključno žerjav, viden na slikah Zelo dobro stanje, glej slike Pošiljanje preko špediterja ali prevzem po predhodnem dogovoru

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. Njdpfsyizxrox Agxowf – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Nwedpfx Ageu Tha Ijxof Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Nwedpfx Asu Thh Esgxsf Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Nsdpfsu Th S Ssx Agxowf Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput rate for empty beverage cans with: • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors.

Stanje: rabljeno, Vzdolžna krožna žaga Krožna žaga za vzdolžni rez Prečna žaga / vzdolžna krožna žaga, l. 1999 deluje od spodaj za dolžine do 4,7 m debelina materiala do 110 mm primerna tudi kot premična žaga za proizvodno linijo Nodpfx Ageq E Ivtsxswf INFO!! Za tak nov Flender krožni žagin ploščati motor 10 kW plačate 4700 EUR, torej več kot pri podjetju Jöma za celoten stroj.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): Nwsdex A U Ncjpfx Agxof – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, skupna masa: 16.000 kg, Stacionarni kladivni mlin - Leto izdelave: 2001 - Višina dovoda: 350 / 400 mm - Širina dovoda: 1.600 mm - Premer rotorja: 1.200 mm - Ločena hidravlična enota - Teža: 16 t - Možna pogonska moč: 160 - 400 kW - Pretok do 60 t/h, odvisno od motorja in materiala Nodpfxsyzn S Do Agxewf Veliko delov obnovljenih (ležaji rotorja in valjev, verige, kladiva, protinoži, valji, sito itd.). Opcijsko: pogonski motor, električna krmilna omara, dovajalni sistem.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Stacionarni kladivni mlin - Leto izdelave: 2001 Nodpsyzn H Iefx Agxowf - Višina dovoda: 350 / 400 mm - Širina dovoda: 1.600 mm - Premer rotorja: 1.200 mm - Ločena hidravlična enota - Teža: 16 t - Možna pogonska moč: 160 - 400 kW - Pretok do 60 t/h, odvisno od motorja in materiala Veliko delov obnovljenih (ležaji rotorja in valjev, verige, kladiva, protinoži, valji, sito itd.). Opcijsko: pogonski motor, električna krmilna omara, dovajalni sistem.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 14,6 kW (19,85 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, poraba goriva na uro: 2 l/h, kapaciteta rezervoarja za gorivo: 20 l, barva: oranžna, skupna masa: 2.320 kg, obratovalna teža: 2.200 kg, dvižna višina: 4.190 mm, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, število sedežev: 1, prostornina žlice: 0,068 m³, vzmetenje: drugo, Leto izdelave: 2025, obratovalne ure: 5 h, Oprema: gumene gosenice, hidravlika, kabina, nastavljiva roka, nastavljivo podvozje, parkirni grelec, LT-25P Mini Excavator 2.5 t | LAST UNIT | -5% PROMOTION ✅ Only 1 left in stock – available immediately! ✅ Promotional price until the end of May: €18,525 net instead of €19,500 net ✅ Save €975 net Modern professional mini excavator in the 2.5 t class with Yanmar diesel engine, enclosed cab with heating, and powerful hydraulics. Ideal for construction, landscaping, agriculture, and municipal applications. Highlights ✅ Yanmar 3TNV80F diesel, 14.6 kW / approx. 19.9 hp ✅ Enclosed comfort cabin with heating ✅ Load-sensing hydraulics for precise operation ✅ Swing boom – ideal for confined jobsites ✅ Robust undercarriage 1,300 / 1,500 mm ✅ High digging and breakout forces ✅ LED work lights ✅ Heavy-duty rubber tracks ✅ Dozer blade included Technical Data ⚙ Operating weight: approx. 2,200 kg ⚙ With cab: approx. 2,320 kg ⚙ Digging depth: up to 2,410 mm ⚙ Digging reach: up to 4,520 mm ⚙ Travel speed: 2.0 – 3.8 km/h ⚙ Gradeability: 30° Nodjx Hg Etspfx Agxjwf Set Includes 📦 3 buckets included: • 25 cm trenching bucket • 50 cm digging bucket • 100 cm grading bucket Optional Accessories (at extra cost) ➕ Hydraulic quick coupler ➕ Hydraulic tilt quick coupler ➕ Hydraulic auger set up to Ø 300 mm Service 🛠 Maintenance every 250 operating hours or annually 🛠 12 months warranty Europe-wide 🛠 Spare parts & service from Rheda-Wiedenbrück stock Price 💰 RRP: €19,500 net 🔥 Promotional price until the end of May: €18,525 net 📍 Location: Rheda-Wiedenbrück ⚠ Last machine in stock – contact us now and secure your benefit!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: dizel, skupna masa: 550 kg, največja dovoljena obremenitev: 500 kg, stanje verige: 100 odstotek, Leto izdelave: 2025, Oprema: gumene gosenice, hidravlika, Track Dumper 500S The Professional Lift Dumper for Maximum Efficiency on the Construction Site The Track Dumper 500S delivers powerful material transport, precise unloading, and reliable engineering. With its hydraulic lifting function up to 1,200 mm, it is the ideal solution for direct unloading into containers, trailers, or raised loading platforms – efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust design, the Track Dumper 500S is perfect for confined construction sites, rough terrain, and professional continuous operation. Your Advantages: - Hydraulic lift and tilt function (90°) for convenient unloading - Lifting height up to 1,200 mm – ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimal traction from wide crawler undercarriage - Durable, low-maintenance, and robust construction - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Operating weight: 550 kg Payload: 500 kg Skip volume: 200 l Skip dimensions: 1,050 × 730 × 730 mm Lifting & Dumping Function: Max. lift height: up to 1,200 mm Dump height: 1,050 mm Dump reach: 220 mm Dump angle: 90° Operation: hydraulic Undercarriage: Type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Gradeability: up to 20° Minimum turning radius: 1,150 mm Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Track Dumper 500S impresses wherever reliability, maneuverability, and lifting capacity are required: - Structural and civil engineering - Landscaping and gardening - Municipal services - Agriculture - Material handling in confined spaces Nodpfjyml D Hex Agxjwf Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Inspection by appointment possible Save now – better price possible! Take advantage of our attractive offers. Enquiries are worthwhile!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 38.650 h, Funkcionalnost: popolnoma funkcionalen, Solvent system, completely overhauled. 3 tanks. Immersion with ultrasound / spraying / vapor degreasing / vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Basket dimensions: 4x T520 x W320 x H200 mm. Filling volume: 1000 L. Nwsdpfx Agowndu Usxsf

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz Nodpfx Aey Aa Ugogxewf L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, designed to optimally support companies with the highest quality standards. Thanks to its high-quality construction and wide range of applications, it offers intuitive operation that efficiently and reliably optimises your tube filling processes. The powerful drives and user-friendly colour touchscreen control system enable maximum flexibility when changing formats and products, significantly simplifying tube filling. The machine features memory slots for quick and reproducible adjustment of all relevant machine parameters. If you want to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling Range Nsdpjyq Hgksfx Agxjwf ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1% Output: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 13.500 kg, premer rotorja: 470 mm, dolžina elektro omare: 2.800 mm, širina krmilne omare: 600 mm, višina krmilne omare: 2.100 mm, dolžina rotorja: 2.000 mm, moč: 220 kW (299,12 KM), največja hitrost vrtenja: 80 obr/min, širina odprtine za polnjenje: 1.650 mm, dolžina polnilne odprtine: 2.060 mm, perforacija sita: 50 mm, vhodna napetost: 400 V, Najzmogljivejši model: Micromat 2000 V2 Pogonski motor: 2 x 110 kW, 400 V/50 Hz Krmilna omara: kompletna s frekvenčnim pretvornikom Nedpfx Agjyxxk Ssxewf Hitrost rotorja: pri 50 Hz cca 80 obr/min Rotorski noži: 104 kos, novi Oblika rotorskega noža: 43x43x19,5 mm Vstopna odprtina (D x Š): 2030 x 1650 mm Dolžina rotorja: 2030 mm Krog rotorjevega premera: 560 mm Strgalo: da Protinov: da Hidravlična enota: kompletna Hidravlični cilinder za sito kaseto: sita 50x50 mm Skupna teža cca 13,5 t Dimenzije (D x Š x V): cca 6500 x 2970 x 2660 mm Ogled in preizkus možen po dogovoru. Vključno z lijakom Dobavni rok: takoj

Stanje: novo, Leto izdelave: 2025, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Height increased by approx. 50 mm. Nsdok E Hmtepfx Agxewf

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Lift table with integrated chain conveyor. Load capacity: 3 tons. Platform size: approx. 2500 x 1200 mm. Technical specifications: Single scissor lift table type TT3000Bsp. - Load capacity: 3,000 kg - Effective lift: 1,600 mm - Closed height: 350 mm - Platform size: approx. 3,200 x 1,200 mm - Drive: hydraulic power unit with 2.2 kW motor - Control: up/down via manual hand switch Chain conveyor with 3 conveyor chains mounted on the lift table. - Length: approx. 3,200 mm - Distance between outer chains: 1,100 mm - Drive: SEW gear motor, 1.1 kW Nsdpfx Agefhbupjxewf - Drive installed underneath the lift platform - Conveyor chains: 3 x 1½" roller chains, German quality - Conveyor speed: approx. 7 m/min - Robust cover plates between the conveyor chains, walkable, closed design - Manual electrical control via hand-held deadman's switch, with forward/reverse function - Installation height: approx. 300 mm Subframe with adjustable feet allowing forklift access underneath with forks. Total installation height: approx. 750 mm (1 unit = lift table + chain conveyor + base frame)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja širina rezanja: 1.030 mm, premer žaginega lista: 450 mm, nastavitev nagiba žaginega lista: 45 °, vrsta nastavitve višine: električni, TECHNICAL DATA – Demonstration Machine from Showroom Carriage length: 3,200 mm Cutting length: 3,400 mm Max. cutting height: 155 mm at 90° / 105 mm at 46° Cutting width (rip fence): 1,030 mm Saw blade max. Ø: 450 mm Saw blade retractable under table: Ø 400 mm Table size, cast iron top: 1,200 x 655 mm Table extension: plus 750 x 655 mm Nsdpfx Agogz Hx Djxowf Table widening: 1,200 x 655 mm Table height: 900 mm +/- 20 mm Main saw blade speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Net weight: approx. 1,051 kg TECHNICAL DESCRIPTION Solid German engineering Suitable for edging, cross-cutting, panel cutting, mitre cuts, etc. Dimensionally stable, self-supporting machine body constructed as a robust welded steel frame from thick-walled steel profiles and laser-machined, mechanically finished steel sheet parts Mounted on the machine body is a torsion-resistant, precision-planed cast iron table top The robust, high-performance saw unit, integrated in the machine base, guarantees precise cutting results The complete saw spindle unit is dynamically balanced. Double-guided swivelling segments made of grey cast iron with dual column guidance for height adjustment, and a long, double ball-bearing mounted circular saw spindle provide absolute smooth running The double ball-bearing carriage is smooth-running and maintenance-free. Accurate, play-free operation over the full length, guided by hardened, precision-ground round steel rails with remote locking at 50 mm graduations Stable yet lightweight crosscut carriage made from steel profiles with a carrying roller at the outer narrow side. The crosscut fence can be extended on the long side up to 250 mm The length stop on the crosscut carriage with mm-scale and telescopic extension extendable up to 3,500 mm; with 2 sturdy, play-free adjustable stop flaps and 1 end stop with support for long strips; length stop can be used as an angle/mitre stop on both sides, continuously adjustable from 0° to 46° with mechanical length compensation. All common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set via a locking system Rip fence with cutting width of 1,030 mm right of the saw blade, including fine adjustment, easy manual adjustment and locking, measurement readout on an easily legible mm scale on an adjustable rule carrier Table widening 1,200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, bevel adjustment and spindle speed Electromotive height and tilt adjustment via push button Saw blade swivel range: 0° – 46° APA quick-release saw blade system Main saw blade speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Protective device swivels to both sides; guard with interchangeable wide/narrow inserts for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm retractable under table Extraction ports: Ø 120 mm on machine body, Ø 80 mm on blade guard Carriage, length and width fence profiles anodised CE compliant GS tested