Menci Polpriklopnik Z Nizko Nakladalno Ploščadjo nakup rabljenega (49.258)

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: Klsdsyhkrljpfx Al Njr * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, with vehicles available immediately and at short notice, on our website. Selection of equipment features. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm, with rear chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2 and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit to control hydraulic functions, except for hydraulic winches * On the gooseneck: 1 pair of removable ALU side walls, approx. 400 mm high, anodized * On the gooseneck: removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck: approx. 40 mm hardwood floor, over the kingpin area with tread plate covering * 2-inch kingpin LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° * Recess in the loading platform and chamfer section to accommodate excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck is done via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data * TPMS tire pressure sensors installed in all wheels * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically steered * 1st axle with electromagnetically operated reverse gear lock, can be activated via reverse gear or manually * Technical axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * Axle tool kit * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load capacity ≈ 50,000 kg * 245/70 R 17.5 3PMSF twin tires. Manufacturer of our choice, load index 143/141J (146/146F) * Loading platform features continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Platform locking with conically welded locking profiles approx. every 250 mm. Includes tensioning plate * 1 intermediate table, approx. 300 mm wide, for telescopic tube with large cross-section * Intermediate table with stepped loading area and extendable suspension rails for ALU bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 8 pairs of flush-mounted lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * Extendable (galvanized) platform width extensions, approx. 230 mm each side (excluding timber boards) * Wheel wells with 15 x 15 mm square climbing strips ahead of the axles, open continuously up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells that can also be used as bridging elements for the extension OR as width extension boards (when vehicle is equipped with width extensions) * Wheel wells with 15 x 15 mm square climbing strips between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports Kjdpfx Aleyhkrfe Nelr * Remote-controlled steering from front and rear via cable remote, with single-track alignment of axles HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-KG-HV-M: A pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Klodpeyhkrrjfx Al Nor * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) Kljdpfxjyhkqzo Al Nsr * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed Kljdpsyhkqnofx Al Nsr * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually Kledeyhkquopfx Al Nor - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, največja dovoljena obremenitev: 16.300 kg, skupna masa: 22.000 kg, konfiguracija osi: 1 os, prva registracija: 08/2022, naslednji pregled (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading platform length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings in the outer platform frame (8t), aluminium frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers on the loading platform, extendable bumper, ramp holder. Klodpfx Aleih E Hyo Ner

Stanje: rabljeno, prva registracija: 06/2010, dolžina tovornega prostora: 11.350 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, - Krmiljena os - Daljinsko upravljanje - Hidravlične rampe - Zgornja nakladalna površina 3500 mm - Spodnja nakladalna površina 7850 mm Kledpfsx Dzn Usx Al Nsr

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: Ksdsxbmn Uopfx Al Nelr - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable

Stanje: rabljeno, največja dovoljena obremenitev: 24.500 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1995, Leto izdelave: 1995, Oprema: ABS, BABELSBERGER SSA 51 SAF AXLES BALLAST TRAILER 14 STAKES 1st OWNER ----VEHICLE HISTORY Klsdpjtvt A Tefx Al Ner * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT * TYPE: SSA 51 / 124/1 * BALLAST SEMI-TRAILER * 3 AXLES * DRUM BRAKES * AIR SUSPENSION * 14 STAKES * CARGO SECURING EYELETS * TIRE SIZE: 445 / 65 R 22.5 * PERMISSIBLE TOTAL WEIGHT: 34,000 KG * UNLADEN WEIGHT: 9,500 KG * PAYLOAD: 24,500 KG * READY FOR IMMEDIATE USE---- * EXPORT SALE ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT CUSTOMS DECLARATION EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS PLATES AND 17-21 DAYS AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least €500 / €1,000 is required. Changes, errors, and prior sale reserved! More vehicles can be found on our homepage. Sale exclusively according to our General Terms and Conditions – see homepage. Important Note – Important Information: Despite careful review of all details in our offer, errors may occur. Some may result from transfer errors in the systems of various platform providers. Therefore, all information is provided without guarantee and does not constitute legal claims. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. The details provided here are without guarantee and do not constitute warranted characteristics.

Stanje: novo, največja dovoljena obremenitev: 25.000 kg, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.000 mm, Leto izdelave: 2025, Oprema: ABS, GVN 3GVN*O4*EXTRA WIDE DECK*KOC*LIFT*PE ----VEHICLE HISTORY * NEW VEHICLE 04/2025 * VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT FEATURES & SPECIAL EQUIPMENT * SPARE WHEEL * FRONT STORAGE COMPARTMENT * FIRE EXTINGUISHER HOLDER * EXTENDABLE DECK FOR EXTRA WIDTH * EXTRA-WIDE SIDE SKIRTS * STORAGE BOXES ON BOTH SIDES * FRONT STORAGE UNDER NECK * LOADING AREA ON NECK * OVERSIZE WARNING SIGN * OSMAN KOC AXLES – IDENTICAL TO BPW AXLES * FIXED HYDRAULIC LOADING RAMPS * ADDITIONAL SUPPORT LEGS * LASHING POINTS * ELECTRICAL CONNECTION FOR HYDRAULIC RAMPS * TRAILER LIGHT SYSTEMS * PRESSURE GAUGE * ROTATABLE REVERSE LIGHTS * DOUBLE KINGPIN MOUNT AXLES & WHEELS * NUMBER OF AXLES: 3 * WHEELS: 12 * TWIN-TYRE CONFIGURATION: ALL AXLES * STEERING AXLE: 3RD AXLE * LIFT AXLE: 1ST AXLE * TYRES: 235/75 R17.5 * SPARE TYRE: YES DIMENSIONS * WHEELBASE: 10,200 MM * AXLE SPACING: 7360 / 1420 / 1420 MM * TOTAL LENGTH: 12,900 MM * WIDTH: 2,550 MM * HEIGHT: 3,000 MM * COUPLING TO REAR END: 11,600 MM * LOADING PLATFORM LENGTH: 8,900 MM * REAR OVERHANG: 1,400 MM * OVERALL LENGTH WITHOUT RAMPS: 12.9 M * NECK HEIGHT FROM GROUND: 1.4 M * DECK HEIGHT FROM GROUND: 0.9 M CARGO SPACE DIMENSIONS * DECK: 8.8 M L / 2.55 M W / 3 M W AT MAXIMUM WIDTH * LOADING AREA OVER NECK: 1.8 M L / 2.4 M W * RAMPS: 3.23 M L / 0.75 M W WEIGHTS & LOADS * UNLADEN WEIGHT: 10,500 KG * AXLE LOAD DISTRIBUTION: 2,820 KG EACH * TECHNICAL GROSS WEIGHT: 58,000 KG * PERMITTED AXLE LOAD PER AXLE: 12,000 KG * PERMITTED AXLE GROUP: 36,000 KG Ksdjwwn Uwopfx Al Njlr * INTERNATIONAL GROSS WEIGHT APPROVAL: 35,500 KG * INTERNATIONAL AXLE LOAD PER AXLE: 8,000 KG * INTERNATIONAL AXLE GROUP: 24,000 KG * FIFTH WHEEL LOAD: 22,000 KG HANDLING & SUSPENSION * MAX. SPEED: 80 KM/H * LIFT AXLE: 1ST AXLE * STEERING AXLE: 3RD AXLE * SUSPENSION: FULL AIR SUSPENSION ON ALL AXLES BRAKES & TECHNOLOGY * BRAKE SYSTEM: WABCO T EBS-E * DRUM BRAKES * COUPLING: E20*55R-01 3753 * D-VALUE: 190 KN BODY & APPLICATION * BODY TYPE: LOWBED SEMI-TRAILER DA 29 * SPECIAL USE: SK EXCEPTIONAL ROAD TRANSPORT * EXPLOSIVE TRANSPORT (UNECE R105): NO * READY FOR IMMEDIATE OPERATION! ---- * EXPORT SALES ONLY WITH MINIMUM DEPOSIT OF €500 – €2,000 ----EXPORT CUSTOMS CLEARANCE EXW IN 10 MINUTES (APPROVED EXPORTER), 5 DAYS, 30-DAY LICENSE PLATE, AND 17–21 DAYS AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION ORAL RESERVATIONS ARE NOT VALID! A deposit of at least €500.00 / €1,000.00 will be charged for sales to the EU and third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied.) Specifications subject to change, errors, and prior sale! You can find more vehicles on our homepage: Sales exclusively under our terms and conditions – see homepage Important Note: Despite careful verification of all offer details, errors may occur. Some may result from transmission errors within various platform systems.

Stanje: rabljeno, največja dovoljena obremenitev: 23.000 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, GVN 3GVN29 OVERSIZE PLATFORM *KOC*LIFT*P ----VEHICLE HISTORY * NEW VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES TECHNICAL DATA AND EQUIPMENT SHEET – VEHICLE TYPE: * GVN TRAILER – 3-AXLE EUROPEAN MODEL TRADE DESIGNATION: * 3GVN29 ----WEIGHT SPECIFICATIONS CURB WEIGHT * 13,000 KG WEIGHT DISTRIBUTION ACROSS AXLES 1st AXLE: 3,653 KG 2nd AXLE: 3,653 KG 3rd AXLE: 3,653 KG ACTUAL VEHICLE WEIGHT * 13,000 KG TECHNICALLY PERMISSIBLE MAXIMUM GROSS WEIGHT * 58,000 KG TECHNICALLY PERMISSIBLE MAXIMUM AXLE LOADS 1st AXLE: 12,000 KG 2nd AXLE: 12,000 KG 3rd AXLE: 12,000 KG TECHNICALLY PERMISSIBLE MAXIMUM MASS ON AXLE GROUPS 1st GROUP: 36,000 KG MAXIMUM GROSS WEIGHT FOR REGISTRATION PURPOSES * 35,500 KG MAXIMUM AXLE LOADS FOR REGISTRATION PURPOSES 1st AXLE: 8,000 KG 2nd AXLE: 8,000 KG 3rd AXLE: 8,000 KG MAXIMUM MASS ON AXLE GROUPS FOR REGISTRATION PURPOSES 1st GROUP: 24,000 KG TECHNICALLY PERMISSIBLE MAXIMUM STATIC FIFTH WHEEL LOAD * 22,000 KG TECHNICAL MAIN DIMENSIONS (COC) • OVERALL LENGTH: 13,050 MM • LOADING PLATFORM LENGTH: 9,200 MM • VEHICLE WIDTH: 2,550 MM • OVERALL HEIGHT: 3,000 MM • PLATFORM HEIGHT: APPROX. 910 MM • NUMBER OF AXLES: 3 • TIRE SIZE: 235/75 R17.5 • SUSPENSION: AIR SUSPENSION • COLOR: RAL 5011 ----EQUIPMENT LIST • EXTENDED GOOSENECK • FIXED GOOSENECK • STEEL FRONT WALL • 2 REMOVABLE STEEL SIDE DOORS • 1 REMOVABLE STEEL REAR FLAP • FRONT STORAGE COMPARTMENT • FRONT TOOLBOX UNDER THE SWAN NECK • LOADING AREA ON THE SWAN NECK LOADING PLATFORM • HIGH-STRENGTH S355 STEEL • PLATFORM EDGES CLAD WITH WOOD • SURFACE COVERED WITH STEEL PLATE • 14 SIDE EXTENSIONS OF 230 MM EACH • 14 FORGED STEEL LASHING EYES, EACH 16 TON CAPACITY • PULL-OUT PANEL FOR OVERSIZE LOADS • OVERSIZE WARNING MARKERS • OVERSIZE WARNING SIGN • ANCHORING POINTS • ADDITIONAL SUPPORTS • PRESSURE GAUGE AXLES AND SUSPENSION • 3 AXLES • OSMAN KOC AXLES, IDENTICAL TO BPW DESIGN • 3rd AXLE STEERABLE • 1st AXLE LIFTABLE • DUAL TIRES ON ALL AXLES • FULL AIR SUSPENSION ON ALL AXLES • 1st AXLE LIFTABLE WITH DRUM BRAKE BRAKING SYSTEM Kodpfx Aow Dlqiel Nslr • WABCO EBS SYSTEM, ELECTROPNEUMATIC, EU STANDARD • AUTOMATIC REVERSE ALIGNMENT FOR STEERED AXLE • DRUM BRAKES ON ALL AXLES TIRES AND RIMS • TIRES: 235/75 R17.5 • SPARE TIRE INCLUDED • WHEELS: 12 • MAX SPEED: 80 KM/H • RIMS: 6.75x17.5 STEEL, SILVER-GREY • SPARE WHEEL INCLUDED PAINTWORK • 2 LAYERS EPOXY PRIMER, EACH 100 MICRONS • MINIMUM 100 MICRONS 2K ACRYLIC PAINT • COLOR: RAL 5011 ELECTRICS AND LIGHTING • 24 VOLT SYSTEM, EC STANDARD • WATERPROOF, FROST-PROOF CONNECTIONS • SIDE AND POSITION LIGHTS • 6 THREE-FUNCTION REAR LIGHTS • 2 REVERSING/WORK LIGHTS • 2 INDICATORS • 2 LICENSE PLATE LIGHTS • 1 BEACON • 2 TRIANGULAR REFLECTORS • REFLECTIVE STRIPES AND E-MARKING • TRAILER LIGHT SYSTEMS • ROTATABLE REAR FLOODLIGHTS RAMPS • FIXED HYDRAULIC LOADING RAMPS • HYDRAULICALLY SLIDING LEFT/RIGHT • SUPPORT LEGS 24 TON DYNAMIC, 50 TON STATIC (OMS) • MANUAL RAMP SUPPORTS • ELECTRICAL CONNECTION FOR HYD (cut)

Stanje: novo, največja dovoljena obremenitev: 43.929 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.690 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Oprema: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader Extendable with Wheel Wells (NEW) Equipment & Highlights Technology & Superstructure Extendable low loader with wheel wells * External length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension * Platform height: only 875 mm for low loading height * Overall width: 2,550 mm + 600 mm extension * Unladen weight: approx. 14,071 kg * Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles, front 2 fixed, rear 2 trailing axles * Lift axle (automatic + manual) * Air suspension with load gauge * WABCO EBS 4S/3M, ABS & RSS * WABCO Smartboard (axle load, suspension, diagnostics) * 16x tyres 245/70 R17.5 (M+S + 3PMSF) * Tyre pressure monitoring according to R141 Ramps & Loading Area Foldable 40-ton ramps * Ramp length 2,750 mm, 850 mm width * Hydraulic sliding system * 45 mm hardwood floor + steel chequer plate over wheel arches * Wheel wells + cover plates included * Excavator arm recess at rear Load Securing Comprehensive lash points: * 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck * 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform * 8,000–10,000 daN on outer frame / well area * 5×2 stake pockets, removable stakes 50×100 mm * Container locks for 1×20 ft or 1×30 ft Equipment & Comfort 1× Toolbox (700×400×360 mm) * Stake box * Beacon * LED side lighting, LED work lights * Wheel chocks * Extension boards with LED * Standard 2" kingpin * Metallized chassis (Zn/Al 85/15) – high corrosion protection Kodpfxjx Efzno Al Nolr * Colour: RAL 9005 Black Special Features New & immediately available * High payload, extremely versatile * Perfect for machinery transport, construction equipment, vehicles, etc. * Very robust construction, premium BPW components We are happy to provide further information upon request.

Stanje: rabljeno, največja dovoljena obremenitev: 39.780 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 01/2027, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Full equipment list available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with chequer plate flooring Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load) Kedpfx Aex Uvlrjl Nelr Tyres: * Tyres 205/65 R 17.5 twin-mounted Axles: * BPW axles, two rigid axles, two steering trailing axles, air suspension, drum brake with raise/lower function * Steering trailing axles equipped with electro-magnetic reverse lock, activated by reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connections to the tractor unit Steel Construction: * Steel construction made of high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, provided by a two-component zinc-rich primer * High-quality, single-color two-component top coat in RAL 3002 Carmine Red * Rear section metallized and painted RAL 9010 (Pure White) * Wheels in silver Electrical System: * Electrical system in accordance with EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Included Accessories: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Provision at rear of gooseneck for ALU loading ramps * Galvanized folding supports under the sloped section of the platform * Holder for a warning beacon at the rear of the trailer * Yellow reflective tape in accordance with EU regulations on the sides, extension, and rear of the trailer * Mountings for warning boards left and right on the gooseneck and rear panel, including power socket * One mudflap at the rear of the trailer * Manual and description on USB stick * European reflective signs (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Acoustic reverse warning signal * Load gauge for determining axle loads, including load diagram

Stanje: rabljeno, prva registracija: 01/2016, dolžina tovornega prostora: 13.382 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 3.157 mm, * SAF osi * Hidravlična nakladalna rampa * Hidravlične podpore * Vitlo * Daljinski upravljalnik * Pomikajoča streha Edscha -----Interna številka vozila: 11079----Pridržujemo si pravico do napak in predhodne prodaje Podpora prek WhatsApp na voljo! Kjdpfewz Dm Djx Al Nelr Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsAppa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: rabljeno, največja dovoljena obremenitev: 52.100 kg, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2009, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 24.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, Oprema: ABS, Goldhofer Lowbed Trailer with Gooseneck * 5 axles, twin-tire configuration * Extendable lowbed (8m) * 1st axle liftable * Last 4 axles forced steering * Hydraulic support legs * Central lubrication system * BPW axles with drum brakes - Tyres: 235/75 R17.5 * Permissible gross weight: 70,000 kg * Unladen weight: 17,900 kg * Loading platform height: 0.85 m * Loading platform width: 2.55 m * Lowbed length: 12.00 m - 20.00 m * Gooseneck length: 4.0 m ---Vehicle number: 11037---Errors and prior sale excepted---Advertising and various lettering have been digitally removed.---We are at your disposal for all formalities related to vehicle purchase. Simply let us know your requests and suggestions; we will take care of the rest. Among other things, we can offer the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Financing brokerage Kledewta Dpepfx Al Ner * Assistance with export license plates * Vehicle transfer * Vehicle registration * Recovery and vehicle transport ---Your VTS Team

Stanje: rabljeno, največja dovoljena obremenitev: 52.100 kg, skupna masa: 70.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, naslednji pregled (TÜV): 12/2025, dolžina tovornega prostora: 15.800 mm, skupna širina: 2.550 mm, Oprema: ABS, Goldhofer polpriklopnik z labodjim vratom in nizko posteljo - 5 osi - 1. os dvižna - Zadnje 4 osi prisilno vodene Kjdpfx Aow S S Uvol Nolr - Centralno mazanje - BPW osi - Pnevmatike: 235/75 E17,5 - Bobnaste zavore - Dovoljena skupna masa: 70.000 kg - Lastna masa: 17.900 kg - Tehnični pregled SP zapade: Tehnični pregled do: 12/2025 - Nakladalna višina: 0,85 m - Nakladalna širina: 2,55 m - Dolžina nizkega ležišča: 12,0 m - Dolžina labodjega vratu: 4,0 m - Izvlečljiv do skupne dolžine 24,4 m Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 11177 WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nas lahko kontaktirate prek WhatsAppa.

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. Ksdpfx Aljwta Alj Nelr WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, * Gigant osi * Zračno vzmetenje * Zadnja krmiljena os * Raztegljiv * Lastna teža: 10.920 kg Klodpfewta Dijx Al Nsr -----Interna številka vozila: 9799----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite prek WhatsAppa Whatsapp nemščina, angleščina -- Whatsapp nemščina, angleščina, arabščina

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2002, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 3.150 mm, Oprema: ABS, * Vehicle has French documents * Floor adjustable via radio/remote control * Foldable loading ramps with radio/remote control * Edscha sliding roof currently removed Ksdpfx Alov Tgv Tj Njlr As inspected or offered, without additional services/accessories. Our offer generally does not include a new TÜV (technical inspection). If a new TÜV inspection is desired, we will be glad to provide a quote from our partner workshops! Vehicle may have promotional stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We assist you with export procedures, preparation of export documents, acquisition of license plates, supplier’s declaration, etc.! Information provided in advertisements, online offers, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typographical or data transmission errors. Listed features must be checked separately if necessary. Subject to prior sale and errors excepted.

Stanje: rabljeno, lastna masa: 15.000 kg, največja dovoljena obremenitev: 39.895 kg, skupna masa: 54.895 kg, konfiguracija osi: 3 osi, prva registracija: 10/1989, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 650 mm, skupna dolžina: 2.750 mm, skupna širina: 3.500 mm, vzmetenje: zrak, velikost pnevmatike: 8.25R15, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden. 3 axles, BPW axles, air suspension, forced steering, lifting and lowering function, lashing rings, 2-part drive-on ramps, hydraulic ramps. Kedpei Rqi Sjfx Al Nolr Superstructure: hydraulically liftable low bed, hydraulic ramps. In 2009, the trailer underwent a partial overhaul for EUR 11,000: NEW FLOOR and much more, and has not been in operation since. Expandable width from 2750 mm to 3250 mm. Loading length in the low bed: 5850 mm, loading length over the axles: 4250 mm. Loading height over gooseneck approx. 1620 mm, over loading area approx. 650 mm, over the axles approx. 940 mm. 1/3 of the low bed is hydraulically liftable! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors.

Stanje: rabljeno, lastna masa: 7.660 kg, največja dovoljena obremenitev: 33.840 kg, skupna masa: 41.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2001, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 920 mm, skupna dolžina: 2.550 mm, skupna širina: 2.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, 1st axle liftable, last axle self-steering, raise/lower function, ABS (anti-lock braking system), lashing rings, support legs, twin tyres, storage box. Kodpowcpcgofx Al Nelr Fifth wheel height 1350 mm, loading height 920 mm, loading length over axles approx. 8,700 mm, loading length over king pin approx. 4,000 mm, gooseneck height approx. 625 mm, preparation for revolving beacon, 800 mm fold-down side walls, 6 pairs of lashing brackets on the outer frame of the low bed, 6 x twist locks on the loading area, extendable warning panels at the front and rear up to 3,500 mm, fifth wheel position from front wall to king pin 1,750 mm, approx. EUR 3,000 invested in maintenance! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Stanje: rabljeno, lastna masa: 16.200 kg, največja dovoljena obremenitev: 52.400 kg, skupna masa: 68.600 kg, konfiguracija osi: 3 osi, prva registracija: 06/1979, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 3.150 mm, višina nakladalnega prostora: 1.380 mm, skupna višina: 131.000 mm, vzmetenje: jeklo, velikost pnevmatike: 445/65R22.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, osi Kässbohrer, listnato vzmetenje, prisilno vodenje, pritrdilne zanke, dvo-delne nakladalne rampe, sprednja opora, dvojna pnevmatika. Nadgradnja: širina ramp 750 mm, sedlena višina 1550 mm, vladarski zatič 3 ½", 4 x 13t osi, 4 osi hidravlično prisilno vodene, skupna dolžina 13.100 mm. PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Kledpfswh Uipox Al Nsr

Stanje: rabljeno, skupna masa: 6.200 kg, prva registracija: 01/2005, Leto izdelave: 2005, prevoženi kilometri: 1.001 km, vrsta goriva: dizel, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, aluminum body. Kljdpfxoi Rqirj Al Nsr Body: Aluminum wheel recesses, floor length 1,800 mm per recess, load capacity 6,200 kg, package price. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: rabljeno, lastna masa: 6.600 kg, največja dovoljena obremenitev: 23.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/1991, naslednji pregled (TÜV): 09/2021, dolžina tovornega prostora: 10.200 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.900 mm, vzmetenje: jeklo, velikost pnevmatike: 9.5R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, 2 axles, BPW axles, leaf suspension, lashing rings, hydraulic ramps, rear supports, stabilizers, twin tyres. Body: 2-axle low-bed trailer with fixed sides, tarpaulin, and continuous hydraulic access ramp, loading height approx. 950 mm! Klsdpfxei Rk U Ho Al Ner Tyre condition approx. 40–70%! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!