Barberan Brb2 1400 nakup rabljenega (2.412)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Swing diameter: 1400 mm Faceplate diameter: 1500 mm Iiedpfxsvxa Tpo Al Nja Control system: Sinumerik 850T Working height: 1400 mm Tool changer: 12 positions Workpiece weight: 5 t Year of manufacture: 1993 Mechanical overhaul: 2010

Leto izdelave: 2026, stanje: novo, Our fully automatic belt filter press is suitable for pressing fruits and vegetables. Thanks to the enclosed housing, the machine is protected from dirt and oxidation. The fast and fully enclosed system ensures your juice remains very fresh and flavorful. Efficient belt cleaning is achieved using brushes and a belt washing system. The entire unit can be disassembled down to the base frame in just a few minutes for thorough cleaning. A separate high-pressure cleaner and air compressor are required to operate the machine. Technical data: • Rated capacity: 1,400 kg/h • Power requirement: 3 kW, 400 V, 16 A, 3-phase • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 2,500 x 1,330 x 1,230 mm • Weight: 1,150 kg • IP65 electrical control cabinet • High yield, up to 75% • High-pressure water required: approx. 5-6 L/min • Air consumption: 50 L/h, 6 bar • Fully automatic and stepless adjustment of belt speed • Easy to clean • Minimal maintenance required Iiodpfod Aqznox Al Nea • Adjustable machine feet Optional: MKT 100 juice collecting tray.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Proizvajalec - OMES Iodpfx Aswwiv Aol Njia Kapaciteta - 1400 palet/izmeno Leto - 2002 Linija je trenutno razstavljena

Stanje: rabljeno, Leto izdelave: 1989, Total pressing force: 1,400 t Stroke: 950 mm Installation height: 2,000 mm Table clamping area approx.: 3,600 x 2,500 mm Ram clamping area approx.: 3,600 x 2,500 mm Cushion force in table: 400 t Cushion stroke: 500 mm Cushion area: 3,060 x 1,860 mm Rapid traverse down: 400 mm/s Working speed: 40 / 80 mm/s Rapid traverse up: 400 mm/s Oil capacity approx.: 5,000 l Power requirement: 450 kW Machine weight approx.: 240 t Standard equipment: Ijdpfxjuqdi Uo Al Neia with hydraulic tool clamping on the ram

Stanje: rabljeno, Technical details: Plate length: 1345 mm Plate width: 845 mm Plate height: 28 mm Machine weight approx.: 260 kg Transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used, Iijdpju N Dg Sofx Al Nea with various mounting holes M12 with various (9x) through-holes Ø 13 mm

Stanje: zelo dobro (rabljeno), Hobart Legacy HL1400 planetarni mikser, model s kapacitetom od 140 litara (Quart). Najnoviji model s vrhunskom specifikacijom. Dostupan s grijanim kotlom. Nova cijena ovog stroja sa standardnim kotlom iznosi 30.000 £. Iiodpfxoukxp Aj Al Nea

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Langzauner belt sanding machine 1000/1400 Large throat clearance on the right side Ijdpfet Ivkrox Al Neia Height-adjustable table, manual adjustment Abrasive belt dimensions: 6800 x 150 mm Right and left belt run Year of manufacture: 1989 Condition: Functionally tested Approx. 10 units constantly in stock

Stanje: rabljeno, Leto izdelave: 2017, Overview  This automatic packer was built in 2017 by the German manufacturer Krones. The machine is in very good condition, still installed, and can be inspected in person at any time.   Technical Details  Output  28,800 bottles per hour  1,200 crates per hour  Recently processed parameters  Bottle dimensions  500 ml  Outside diameter: 65.50 mm  Overall height: 206.30 mm  Crate  Formation: 6x4  Crate length: 400 mm  Crate width: 300 mm  Crate height: 255 mm  Crate infeed direction: transverse  Electrical connection: 400/230V, 50Hz, 15A Iiedpet Rbznefx Al Nea

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), vhodna napetost: 400 V, vhodni tok: 63 A, vhodna frekvenca: 60 Hz, hod: 212 mm, višina mize: 800 mm, skupna dolžina: 2.670 mm, skupna širina: 1.690 mm, skupna višina: 4.480 mm, skupna masa: 22.000 kg, potovalna razdalja osi X: 800 mm, proizvajalec krmilnikov: Cybelec, model krmilnika: CT12, delovna širina: 1.400 mm, upogibna sila (maks.): 225 t, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, število osi: 3, vrsta aktuacije: hidravlični, Oprema: dokumentacija / priročnik, Rabljena upogibna stiskalnica BREZ numeričnega krmiljenja. Vključena enota za hlajenje olja, priložena stroju. Hidravlično vpenjanje matrice. Zadnji naslon v oseh X in R. Dobava takoj. BREZ numeričnega krmiljenja. Prevzem na lokaciji, brez dvigala in nakladanja. (Neto cena za plačilo na lokaciji: 500€) Ijdpfxjwx Rl Uj Al Njia

Stanje: zelo dobro (rabljeno), Zlagalnik za deske Sacot CA.SCA.PILA 1400 Profesionalni zlagalnik, namenjen samodejnemu zlaganju desk v enakomerne, stabilne in ponovljive skladovnice. Idealna rešitev za žage in lesno-predelovalne obrate, ki bistveno povečajo produktivnost in udobje pri delu. Iedpfx Alsx Hd Tbs Neia TEHNIČNI PODATKI Dolžina materiala za zlaganje: 770–1400 mm Širina zlaganja: 1200 mm Višina zlaganja: 1250 mm Dimenzije stroja: 4600 × 3700 × 2600 mm (V) Podajanje / prevzem: valjčna izhodna miza Konstrukcija: jeklena, industrijska, težka Upravljanje: električno + pnevmatsko Zlagalnik je zelo primeren za: žage, lesno-predelovalne obrate, proizvodne linije, proizvodnjo krajših in srednje dolgih elementov MOŽNOSTI NADGRADNJE (opcija): popolna tehnološka linija, ki vključuje: Skobeljni stroj Weinig Hydromat 23c 60m/min Formatirka SACOT Zlagalnik SACOT Oglejte si celoten opis Predlagajte ceno Vzemite v leasing

Stanje: pripravljen za uporabo (rabljen), 1 used bed-type milling machine Manufacturer: Knuth Model: KB 1400 Year of manufacture: 2006 Technical specifications: Working area Distance spindle axis – table surface: 150 mm - 650 mm Number of T-slots: 3 Clamping area of table: 1400 mm x 400 mm T-slot width: 18 mm Isdpsxnp Epsfx Al Neia T-slot spacing: 100 mm Maximum vertical adjustment speed: 1670 mm/min Travel paths Travel X-axis: 950 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm Vertical milling head Spindle taper: SK 50 DIN 2080 Arm length: 510 mm Spindle speed (vertical): 30 rpm - 1800 rpm Quill stroke: 105 mm Head swivel range: ± 30° Rapid traverse Rapid traverse X-axis: 1670 mm/min Rapid traverse Y-axis: 1670 mm/min Rapid traverse Z-axis: 1670 mm/min Feeds Feed rate X-axis: 18 mm/min - 627 mm/min Feed rate Y-axis: 18 mm/min - 627 mm/min Feed rate Z-axis: 18 mm/min - 627 mm/min Drive capacities Main drive motor power: 7.5 kW Feed motor power: 0.75 kW Z-axis motor power: 0.75 kW Coolant pump motor power: 0.04 kW Dimensions and weights Coolant pump flow rate: 12 l/min Dimensions (L x W x H): 2.29 m x 1.77 m x 2.12 m Weight: 3660 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 5.840 h, vhodna napetost: 380 V, vhodni tok: 630 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, največja višina reza: 1.000 mm, največja širina rezanja: 1.000 mm, vrsta upravljanja: Krmiljeno s PLC krmilnikom, premer valja: 1.400 mm, vrsta aktuacije: hidravlični, skupna višina: 3.540 mm, skupna dolžina: 36.000 mm, skupna masa: 15.700 kg, višina mize: 1.150 mm, Oprema: CE označba, Navpična tračna žaga v zelo dobrem stanju, malo rabljena, visoko zmogljiva, avtomatska linija za razrez hlodovine. Ijdpfxeywgnij Al Neia

Stanje: rabljeno, Leto izdelave: 1995, Used machine Year of manufacture: 1995 Equipment and technical specifications: efficient: - Turbo system: 25% higher plant performance through state-of-the-art application technology with the same space requirement! - Reduced processing times thanks to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying processes by using solvent-free systems and one-man operation flexible: - Cost-effective one-man operation with return function or, optionally, continuous feed operation for two-man use - Modular PC system; possible to add additional rolling, smoothing, or grinding units ergonomic: - Easy operation via ergonomic control elements service-friendly: - With cleaning circuit and quick-change system process-safe: - Top-quality surfaces, precisely reproducible included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp - 60/80/120 W Working height: 850 - 950 mm Application roller, rubber-coated: D = 238 mm Metering roller, chrome-plated: D = 174 mm Pass-through height: 3-120 mm UV radiation module: 80/120 W mercury Iiodpewka Hlefx Al Nea Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short-term Location: Röllbach

Stanje: novo, Leto izdelave: 2025, Folding machines of type ZGR-1400 are robustly designed and built, making them well-suited for processing zinc, aluminum, and copper in common thicknesses. All in all, an excellent choice at an unbeatable price! Standard configuration offers a bending angle of 145 degrees, but at the customer's request, we can also manufacture a folding machine with a 165-degree bending angle. Folding Machine 1400/2.0 incl. transport rollers Technical Data: - Maximum working length: 1,400 mm - Maximum steel sheet thickness: 2.0 mm - Bending beam: 24 mm - Weight: approximately 190 kg (manual machine) - Shearing along the entire working length - Upper beam lift adjustable in three positions - Maximum clear width between beams: 80 mm - Delivery to Germany or Austria: €180 Iiedpfjcpn Hbox Al Noa - Optional rotary shear (up to 0.8 mm): €350 - Delivery time: 2–4 days - Cash payment upon delivery - The rotary shear has a maximum cutting capacity of 0.8 mm (steel sheet) - Machine complies with CE regulations and includes a 12-month warranty. We look forward to hearing from you!

Stanje: rabljeno, Mešalec mesa Proizvajalec: CFS Kapaciteta: 1400 litrov Iisdpfx Ajwi Smnjl Nja Dimenzije: 2600 x 1700 x 2300 mm

Stanje: novo, Leto izdelave: 2025, Personal relationships with our partners and customers are our top priority. Only through close cooperation, starting from the planning phase, can the desired objectives be achieved. Folding Machine 1400/1.2 Technical Data: - Max. working length: 1400 mm Iisdpfx Alecpn E Aj Noa - Suitable for steel sheet up to 1.2 mm - Weight: approx. 150 kg - Shearing along the entire working length - Upper beam adjustable in three positions - Maximum clear opening between beams: 80 mm - Warranty: 12 months - Delivery with our own transport vehicle - CE certificate - Price: 1,050 Euro - Delivery to Germany: 180 Euro - Delivery time: weekly - Cash payment upon delivery - Optional: Rotary shear (maximum cutting capacity up to 0.8 mm / steel sheet) + 350 Euro We look forward to hearing from you!

Stanje: skoraj kot novo (rabljeno), Automatic press line (continuous, short-cycle), suitable for applying veneer, paper, or lamination, consisting of: V03022) Loading station (gantry type) "SAG" double station, equipped with a central motorized roller conveyor. V03023) Brushing machine (for panel cleaning) "POLIMA" V03024) Glue application machine "OMMA" Isdpfxodun Nij Al Nsia V03025) Motorized feed rollers "OMMA" V03026) Preparation table for panels and motorized feed belt to press "SIMI" V03027) Continuous, short-cycle hydraulic hot press "SIMI" 1400 x 4500 mm, equipped with 10 pressing cylinders (diameter 120 mm) V03028) Stacking station (gantry type) "SAG" double station, equipped with central motorized roller conveyor

Stanje: dober (rabljeno), Weiss Climate Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height: approx. 800 mm Width: approx. 2000 mm Depth: approx. 900 mm Volume: 1440 liters Exterior Housing Material: double-coated Zincor sheet steel Dimensions Height: approx. 2000 mm Width: approx. 2200 mm Depth: approx. 2000 mm (H x W x D) 2000 x 2200 x 2000 mm Finish: light grey (RAL 9002) Door: double-winged, left and right hinged Features: Feed-throughs in the floor and ceiling: 2 each, nominal width 100 mm, for integrating the pulsation tables Feed-throughs in the side walls: 1 each on left and right, 100 mm Refrigeration unit: air-cooled Control: Digital measurement and control system DMR Basic control panel: integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance Data: Temperature range without climate control: +20...+100 °C Temperature consistency without climate control: +0.2 … +0.5 K (over time, depending on range, steady-state) Temperature range with climate control: +20...+95 °C Temperature consistency with climate control: +0.2 … +0.5 K (over time, depending on range, steady-state) Dew point range: +20...+94 °C Humidity range: 10...98% r.h. Humidity consistency: +3 ... +5% r.h., depending on range, steady-state Temperature change rate measured at outlet (without test specimen and load): - Cooling: 0.5 K/min average, between +100 and +20 °C - Heating: 0.5 K/min average, between +20 and +100 °C Performance data is based on an ambient temperature of max. +25 °C and the specified nominal voltage. For faultless operation, ambient temperature must be between +10 and +35 °C. Seat Test Equipment with Steel Frame for mounting and fastening on climate test chamber including: • 2 pneumatic weight lifting devices (150 mm stroke) for sample change, 12 weights of 5 kg each • 1 subframe in normal steel welded construction for fastening underneath the climate test chamber. The frame is fitted with removable sheets on all sides and has 2 hinged doors for adjusting eccentricity. These doors are equipped with safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 linear ball bearings • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for sample attachment, made of aluminum, min. thickness 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attachment of the pelvis dummy • 2 load rods, Ø 60 mm, made of stainless steel (Connection to the test specimen not included in our price, but can be offered after exact specification.) • 2 three-phase motors, 2 belt drives with tensioners • 1 pneumatic control system with 2 manual valves, filter-regulator unit, and shut-off valve • 1 electrical control cabinet with 2 SEW frequency converters, manual switch, emergency stop button, 2 ON buttons, 2 OFF buttons, 2 speed indicators, 2 potentiometers for speed adjustment, 2 preset/recallable load change counters with zeroing and shut-off Technical Data: Frequency: 100–1000 cycles/min Load: 2 x 45 g Stroke: 0–40 mm Load from above: 450 N each Financing through our bank is possible. komplett-konzept.leasingo.de You will find more – both new and used – in our shop! Ijdpjxbgrgsfx Al Nsia International shipping costs on request!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61029386, vpenjalna sila: 2.000 kN, premer vijaka: 70 mm, Oprema: dokumentacija / priročnik, Stroj za brizganje KraussMaffei 200/1400 CX POL BMC je naprodaj v zelo dobrem stanju. Malo delovnih ur, izdelan leta 2017, uveden v obratovanje leta 2018. Krmiljenje MC6. Za več informacij nas kontaktirajte po e-pošti! Hvala! Iodswz Iv Aopfx Al Neia

Stanje: dober (rabljeno), Leto izdelave: 2017, Kunzmann BA1400 Letnik izdelave: 2017 Iisdeydxk Iepfx Al Nja Moč: 28 kW Krmiljenje: Heidenhain TNC 640 Dimenzije mize: 1400 x 710 mm Maksimalna teža obdelovanca: 1500 kg Vpenjanje vretena: SK40 Maksimalna teža orodja: 160 kg Čas menjave orodja: 3 sekunde Čas od ostružka do ostružka: 8 sekund X: 1400 mm Y: 700 mm Z: 760 mm 3D merilna tipala Visokotlačno hlajenje skozi vreteno IKZ Notranji transporter ostružkov Stroj iz enosmenske uporabe

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, dvižna višina: 6.000 mm, glavna hitrost dviga: 5.000 mm/min, in excellent condition, incl. load data memory with high reserve capacity, incl. underframe bottle, electrics 400/230/24V, incl. central electrics for crane operation etc.! Advantage: No CAN bus control! Also available as a crane set. Iiedpfx Asq R N Tqjl Nsa

Stanje: rabljeno, Technical details: Iodpfjw Rkybsx Al Nsia Diameter: 20 mm Workpiece length: - mm Total power requirement: 2.3 - 3.0 kW No-load voltage: 2.8 V Frequency: 50/60 Hz Power consumption: 3 kVA Connection voltage: 230 V Control voltage: 15 V (direct current) Space requirement approx.: 1.0 m Machine weight approx.: 30 kg Dimensions L x W x H: 395 x 275 x 255 mm The crack testing device consists of a portable housing with control and display elements, as well as connection cables for magnetization and a mains plug. Application area The crack testing device is intended for surface crack inspection of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! During magnetization, the workpiece must be rinsed with a test fluid (inspection medium). Afterwards, defects can be detected under UV light (UV lamp).

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Iiodpfxju I R Uts Al Nea Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Iiedot Hw Iijpfx Al Nea Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 1.562 km, moč: 375 kW (509,86 KM), prva registracija: 06/2024, vrsta goriva: dizel, konfiguracija osi: 8x2, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2024, Oprema: ABS, AdBlue, centralno zaklepanje, električno nastavljivo ogledalo, klimatska naprava, navigacijski sistem, spojka prikolice, tempomat, žerjav, = More Options and Accessories = - Aluminium fuel tank - Power brake booster - High beam headlights - Low noise - Speed limiter - Air suspension - Media system Ijdpfx Ajyium Ael Nsia - Rear-view camera - Sun visor - Toolbox - Power take-off (PTO) - Towing jaw / drawbar coupling = Further Information = Axle configuration Front axle 1: steerable Front axle 2: steerable Weights Unladen weight: 25,505 kg Functionality Mast: telescopic (13 sections) Mast length: 31 m Lifting capacity: 12,430 kg Lifting height: 3,500 cm Crane: HMF 7020-K7 FJ 1400-K6, mounted behind the cab Body make: HMF HMF 7020-K7 FJ 1400-K6 CE marking: yes Condition Technical condition: very good Visual condition: very good NEW MERCEDES-BENZ AROCS 3251 8X2 + HMF 7020-K7 FJ 1400-K6 CRANE EURO 6 L PACKAGE 510 HP DRIVE 8X2 LAST AXLE IS LIFTABLE AND STEERABLE AIR SUSPENDED WHEELBASE 570 CM DIFF LOCK AUTOMATIC TRANSMISSION WITH ENGINE BRAKE AROCS SLEEPER CAB WITH AIR CONDITIONING AUXILIARY HEATING NAVI TRAILER COUPLING MANY TOOLBOXES HMF 7020-K7 FJ 1400-K6 CRANE TOTAL 13X HYDRAULICALLY EXTENDABLE RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS MAX WORKING HEIGHT 35 METERS MAX LIFTING CAPACITY 12,430 KG MAX LIFTING CAPACITY AT 31 METERS 470 KG 4X OUTRIGGER SUPPORT HYDRAULIC WINCH WITH ALL OPERATING FEATURES EXTRA HYDRAULIC FUNCTION UP TO JIB OPEN LOADING PLATFORM WITH REMOVABLE ALUMINIUM SIDE WALLS 635 CM X 249 CM X 60 CM LOADING PLATFORM HEIGHT 115 CM!!! LASHING EYES, STAKE POCKETS, TWISTLOCKS TRUCK AND CRANE ARE COMPLETELY NEW!! FOLLOW OUR INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH