Vertikalni obdelovalni center

Kunzmann BA 1400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 700 mm, pomik po osi Z: 760 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 640, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 28.000 W, teža orodja: 160.000 g, število osi: 3, This 3-axis KUNZMANN BA1400 was manufactured in 2017. It is equipped with a powerful 28 kW motor and a Heidenhain TNC 640 control. The machine features a table size of 1400 x 710 mm and can handle a maximum workpiece weight of 1500 kg. If you are looking for high-quality machining capabilities, you should consider the BA1400 vertical machining center from KUNZMANN that we have for sale. Contact us for further details. • Heidenhain TNC 640 control • Standard SK40 spindle (belt driven) • Spindle taper SK40 • Spindle speed 10,000 rpm • Infinitely variable vertical spindle speed 20-10,000 rpm • Power output 28 kW • Power output 100% duty cycle 10.0 kW • Power output 40% duty cycle 14.0 kW • Power at 100% duty cycle 20.0 kW • Power at 40% duty cycle 25.0 kW • Spindle torque at 100% duty cycle 130 Nm • Spindle torque at 40% duty cycle 190 Nm • Spindle torque at 100% duty cycle 180 Nm • Spindle torque at 40% duty cycle 240 Nm • MAS-BT40 tool holder with pull stud DIN 69872 A • 40-position tool changer (chain magazine) • Max. tool weight 160 kg • Tool change time 3 sec • Chip-to-chip time 8 sec • Table dimensions 1400 × 710 mm • Max. workpiece weight 1500 kg • X-axis travel 1400 mm • Y-axis travel 700 mm • Z-axis travel 760 mm • X-axis working area 1400 mm • Y-axis working area 700 mm • Z-axis working area 750 mm • Distance spindle to table 180–930 mm • Spindle center to column 760 mm • Feed rate X/Y/Z 10 m/min • Rapid traverse X/Y/Z 20 m/min • Brushless digital servo motors on all axes • Chip conveyor with coolant discharge (LU version) • Coolant through spindle up to 40 bar • Coolant flow rate 25 l/min at 40 bar • Automatic coolant fine filtration 40 µm • Rotatable viewing window on front door • Oil mist extraction with multi-stage filtration (H13 filter) • Electronic handwheel HR 510 FS with integrated buttons and emergency stop • TS 460 probing system with wireless transmission • Automatic tool measurement Heidenhain TT 46 • Measuring accuracy ≤ 15 µm • Max. probe deflection 5 mm • Probing speed max. 5 m/min • DXF converter software for 2D contour transfer • PC teleservice software for remote diagnostics and maintenance • Operating voltage 400 V 50 Hz • Power consumption 35 kVA • Control voltage 24 V Dcjdpfxoyzn A Aj Abgsi • Machine weight approx. 8.5 t • Machine weight approx. 12,000 kg • Machine dimensions approx. 4.20 × 2.45 × 3.09 m Technical Specification Taper Size: SK 40

Stanje: dober (rabljeno), Leto izdelave: 2014, Caracteristici tehnice ale acestui centru de prelucrare cu 5 axe Producător: DMG Model: DMU 50 An fabricație: 2014 Control CNC 3D: HEIDENHAIN ITNC530 SMART NC Tip ecran: DMG ERGOLINE®️ CONTROL 19” Masă rotativă NC basculantă, simultană: INCLUSĂ Suprafață masă: 630×500 mm Greutate maximă admisă pe masă: 250 kg / palet Masă rotativă (Axa C): 0,001º (±360º) Axe Deplasare longitudinală (Axa X): 500 mm Deplasare transversală (Axa Y): 450 mm Deplasare verticală (Axa Z): 400 mm Avans rapid (axe X/Y/Z): 42.000 mm/min Avans de lucru (axe X/Y/Z): 10.000 mm/min Interval înclinare (Axa B): -5º/+110º Broșă Turație broșă: 10.000 rpm Con frână: SK40-DIN 69871 Putere motor principal: 25 kW Schimbător automat de scule (ATC) Număr locașuri ATC: 60 Lungime maximă sculă: 300 mm Echipare Dcedpfx Aoy Smynebgji Transportor de șpan: INCLUS Răcire activă a dulapului electric: INCLUS Palpator de scule: INCLUS Sistem de măsurare directă: INCLUS Pistol de spălare: INCLUS Manșă portabilă de comandă: INCLUS Sistem de aspirație: INCLUS Răcire internă: INCLUS Rezervor lichid de răcire cu filtru de hârtie: INCLUS Altele Dimensiuni utilaj (Lxlxh): 5.100×3.200×2.750 mm Putere electrică totală: 27 kVA Greutate utilaj: 4.500 kg Preț la cerere

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives! Dcjdpfxot Hw H Es Abgsi

Stanje: rabljeno, Leto izdelave: 2011, Technical Details: X-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) 2x pallet changers: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Required space approx.: 3.3 x 6.15 x 3.2 m Dodpfsyzza Iox Abgjci 6-axis simultaneous horizontal machining center with programmable rotary-tilting table (A/B-axis) The B-axis provides a swivel range of 180°, allowing the part to be machined overhead and chips to fall freely downwards. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Dual pallet changer, pallets 630 x 630 mm 6-way hydraulic supply to pallets with coupling mechanisms, rotary union in A- and B-axis Special hydraulic pump system ICS (internal cooling, 10–80 bar), 1 clamping channel in the working area with proportional valve 10–200 bar Electromechanical tool length measuring device GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinse gun Coolant rinsing in the work area Air gun Oil skimmer Automatic door Remote diagnostics Price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Dcjdsyv In Ijpfx Abgji Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Dodpfx Abjwyv Nzogoci Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Dsdpsrx Rxtsfx Abgoci Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: novo, Leto izdelave: 2025, MASCHINE IST FABRNEU Dcodpfxerc Dkqo Abgoi Die Maschine ist geeignet zum Verpressen von Aluminiumdosen sowie Stahldosen bis zu einer Materialstärke von 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche elektrischen und elektronischen Komponenten stammen von den Marken Schneider und Siemens. Die Maschine ist vollautomatisch, ausgestattet mit einer SPS-Steuerung und einem Siemens HMI Simatic Touch-Panel mit Not-Aus-Tastern. Die Maschine unterliegt der Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden, je nachdem, was zuerst eintritt. Je nach Einsatzgebiet ist ein Öl-Kühl-/Heizsystem enthalten. Der MB 500 Magnetabscheider und der VH (120-250) Schwingförderer sind optional erhältlich und dienen zur Trennung von Aluminium- und Stahldosen sowie zur Entfernung von Schmutz und Staub aus dem Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behälterabmessungen (Breite x Länge x Höhe): 500 mm x 1.000 mm x 330 mm Leistung: - Bis zu 1.000 kg/Stunde (Aluminium) - Bis zu 2.000 kg/Stunde (Stahl) Ballengewicht (über mechanische Wägevorrichtung): 10–20 kg Taktzeit: 30 Sekunden Stößelkraft Deckelzylinder: 25 t Stößelkraft Hauptpresszylinder: 100 t Betriebsdruck: 225 bar Maschinenabmessungen (Breite x Länge x Höhe): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 12.244 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 275 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.620 mm, skupna masa: 4.200 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SolutionLine, število mest v zalogovniku orodij: 16, število osi: 2, Ta 2-osna horizontalna stružnica SPINNER TC 600-65MC je bila izdelana leta 2015 in je opremljena s krmiljem Siemens 840D ter 16-pozicijskim revolverjem z menjalnim orodjem. Stroja ima glavno vreteno z maksimalnimi obrati do 4.000 min⁻¹ in močjo 24 kW. Omogoča nagibni premer nad ležiščem 425 mm ter maksimalni premer struženja 310 mm. Preverite možnost nakupa te horizontalne stružnice SPINNER TC 600-65MC. Za dodatne informacije o stroju nas kontaktirajte. Dodatna oprema • Popolna zaščitna oplata z rezervoarjem za hladilno tekočino • Delovna razsvetljava + pnevmatska oprema • Panoramsko okno za optimalen pogled na delovni prostor Prednosti stroja Tehnične prednosti stroja • Razdalja med osema: pribl. 600 mm • Maksimalni premer struženja: 310 mm • Navor: glavno vreteno (Fanuc, S6 40 %) 178 Nm, glavno vreteno (Siemens, S6 40 %) 301 Nm • Pomik pinole: 120 mm • Dolžina pomika: 475 mm • Hitrost vrtečih se orodij: 6.000 min⁻¹ • Pogonska moč orodij: (Fanuc, 30 min) 3,7 kW, (Siemens, 40 %) 6,0 kW Dodatne informacije Mediji Pnevmatski max. obratovalni tlak: 10 bar Normalni tlak: 6 bar Hidravlični max. obratovalni tlak: 30 bar Dcsdpfx Ajx D E Hnsbgji Krmiljenje Krmilnik: standard Siemens 840D, opcijsko Fanuc 21i Obratovalna napetost: 400 V Omrežna frekvenca: 50/60 Hz Krmilna napetost: 24 V DC Vmesniki: USB, Ethernet, SPINNER-UNIMAG podajalnik palic (električni) Tehnične specifikacije Hlajenje skozi vreteno: Ne Proti-vreteno: Ne Pogonska orodja: Da Velikost utora za orodje: VDI 30

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, CNC obdelovalni center DMC 635V Leto izdelave: 2006 Krmilnik: Heidenhain TNC 530i Dsdow Tir Uspfx Abgeci Delovne ure krmilnika: cca 58.400 h Ure programskega delovanja: cca 19.980 h Po nalepki v elektro omari sta bila vreteno in motor zamenjana januarja 2019 pri 10.660 h. Za to ni dokazil. Stroj deluje mirno. Pomiki osi: X 635 Y 510 Z 460 Vpenjalo orodja: SK 40 Menjalec orodij na 20 mest Miza: 790×560 S transporterjem za ostružke Teža cca 3700 kg Ponudba velja izključno za podjetja v skladu s §14 BGB Prodaja zasebnikom ni možna.