Atm Recyclingsystems Gmbh Arnoshred Sse 700 nakup rabljenega (73.730)

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Njdpfxsy Aldas Agxsla

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Nedpoyz Af Eefx Agxela Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 28 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2380029, skupna višina: 2.600 mm, skupna širina: 1.500 mm, skupna dolžina: 3.410 mm, skupna masa: 4.200 kg, premer rotorja: 330 mm, vrsta vhodnega toka: Klimatska naprava, dolžina rotorja: 800 mm, moč: 30 kW (40,79 KM), Function: Nljdjyw N Acspfx Agxea The input material is drawn in by two slow-running, counter-rotating shafts (resulting in low dust and noise emissions), onto which cutter discs are mounted. This process is monitored by an intelligent and innovative PLC control system. Should the machine become overloaded or foreign objects enter the cutting mechanism, the control system reverses operation. The precise cutting gap of the cutter discs ensures energy-efficient shredding of the material. The mounted clearing comb prevents wrapping and uplift of the material being shredded. The width of the blades and the number of cutting edges determine the output size of the shredded material. Applications: This robust and heavy-duty machine, designed for maximum durability, enables the cost-effective shredding of not only special waste, metal chips, electronic scrap, and steel drums, but also various containers filled with liquids. All types of industrial waste, steel and plastic containers Production waste, file folders, paper, cardboard Electronic scrap, electric cables, metal chips Food, kitchen waste, biogenic waste, wood Glass, plastics, various liquid-filled containers, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 100 h, 5 pieces: • Gravimetric screw feeder • Feed hopper with pneumatic rotary valve, each with cover • Screw conveyor from Big Bag unloading, each with height-adjustable individual frame 1 piece: • Trough screw conveyor for combining and conveying the dosing materials into a transfer container 5 pieces: • Big Bag discharge station with suspension crossbeam that prevents the Big Bag from collapsing during emptying • Big Bag base plate with discharge aid (vibration drive) Nlsdpfot S Rdusx Agxja Option not included in the price: Control cabinet incl. control system Delivery: EXW

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Nsdpfx Ajhx Elfsgxjla Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. Nedpoyizxrofx Agxjla – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Nljdpfx Asu Tha Ijgxoa Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Nljdju Thh Espfx Agxoa Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data - Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput rate for empty beverage cans with: • one press stroke: approx. 1.7 t/h • two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition (see the function video after overhaul) and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematic). Inspection is possible by appointment. No liability is assumed for technical data or possible errors. Njdpfx Ageu Th S Sjxsla

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Nljdpjx A U Ncjfx Agxea Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, skupna masa: 16.000 kg, Stacionarni kladivni mlin - Leto izdelave: 2001 - Višina dovoda: 350 / 400 mm Nlsdpsyzn S Djfx Agxja - Širina dovoda: 1.600 mm - Premer rotorja: 1.200 mm - Ločena hidravlična enota - Teža: 16 t - Možna pogonska moč: 160 - 400 kW - Pretok do 60 t/h, odvisno od motorja in materiala Veliko delov obnovljenih (ležaji rotorja in valjev, verige, kladiva, protinoži, valji, sito itd.). Opcijsko: pogonski motor, električna krmilna omara, dovajalni sistem.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Stacionarni kladivni mlin - Leto izdelave: 2001 Nsdpfx Agsyzn H Ijxola - Višina dovoda: 350 / 400 mm - Širina dovoda: 1.600 mm - Premer rotorja: 1.200 mm - Ločena hidravlična enota - Teža: 16 t - Možna pogonska moč: 160 - 400 kW - Pretok do 60 t/h, odvisno od motorja in materiala Veliko delov obnovljenih (ležaji rotorja in valjev, verige, kladiva, protinoži, valji, sito itd.). Opcijsko: pogonski motor, električna krmilna omara, dovajalni sistem.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, obratovalne ure: 38.650 h, Funkcionalnost: popolnoma funkcionalen, Solvent system, completely overhauled. 3 tanks. Immersion with ultrasound / spraying / vapor degreasing / vacuum drying. Integrated distiller with automatic oil discharge. Automatic loading 5+5. Basket dimensions: 4x T520 x W320 x H200 mm. Filling volume: 1000 L. Nedpewndu Uofx Agxsla

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, S&F Vibrating Screen Machine | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Screen area: 2.0 m² per mesh size Screen decks: 1 piece Mesh aperture size: - 1st screen deck: punched perforated plate, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red including: Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Article No.: 406.4345 including extension feet L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass Nedpfx Agsy Aa Ugsxela - Wood pellets - Charcoal - Waste wood - Bark vibrating screen | wood chip screen | vibrating screening machine | flat screen | oscillating screen | drum screen | screening machine for wood chips | CHP screening machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, designed to optimally support companies with the highest quality standards. Thanks to its high-quality construction and wide range of applications, it offers intuitive operation that efficiently and reliably optimises your tube filling processes. The powerful drives and user-friendly colour touchscreen control system enable maximum flexibility when changing formats and products, significantly simplifying tube filling. The machine features memory slots for quick and reproducible adjustment of all relevant machine parameters. If you want to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling Range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1% Output: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg Nedpfxsyq Hgks Agxela

Stanje: novo, Leto izdelave: 2025, Two tables are connected in tandem operation for a combined load capacity of 5000 kg. Technical description with the following main data: Capacity: 3000 kg static distributed load Lift stroke: 800 mm Closed height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: smooth sheet steel Lifting time: approx. 18 sec for full lift stroke Lowering time: dependent on load Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 meter cable Motor: 2.2 kW, 1,400 rpm Solenoid voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Power unit: integrated in the lift table Control box: deadman control incl. 2 m cable Total weight: approx. 330 kg Tandem control for synchronized movement. Note: 100% synchronization cannot be guaranteed. Any height differences that occur will be compensated in the base or upper position! The safety edge strips of the two lift tables are NOT interconnected. Nledpfx Agjk E Hmtoxja Minimum distance of 500 mm between the lift tables. Maximum distance of 3000 mm between the lift tables. Self-supporting base frame with 4 flange wheels in which the lift table is mounted. 4 ball-bearing flange wheels, wheel Ø150/175 mm, heavy-duty version, made from turned C45 steel. Height increased by approx. 50 mm.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Lift table with integrated chain conveyor. Load capacity: 3 tons. Platform size: approx. 2500 x 1200 mm. Technical specifications: Single scissor lift table type TT3000Bsp. - Load capacity: 3,000 kg - Effective lift: 1,600 mm - Closed height: 350 mm - Platform size: approx. 3,200 x 1,200 mm - Drive: hydraulic power unit with 2.2 kW motor - Control: up/down via manual hand switch Chain conveyor with 3 conveyor chains mounted on the lift table. - Length: approx. 3,200 mm - Distance between outer chains: 1,100 mm - Drive: SEW gear motor, 1.1 kW - Drive installed underneath the lift platform - Conveyor chains: 3 x 1½" roller chains, German quality - Conveyor speed: approx. 7 m/min Nljdpfxefhbupo Agxja - Robust cover plates between the conveyor chains, walkable, closed design - Manual electrical control via hand-held deadman's switch, with forward/reverse function - Installation height: approx. 300 mm Subframe with adjustable feet allowing forklift access underneath with forks. Total installation height: approx. 750 mm (1 unit = lift table + chain conveyor + base frame)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja širina rezanja: 1.030 mm, premer žaginega lista: 450 mm, nastavitev nagiba žaginega lista: 45 °, vrsta nastavitve višine: električni, TECHNICAL DATA – Demonstration Machine from Showroom Carriage length: 3,200 mm Cutting length: 3,400 mm Max. cutting height: 155 mm at 90° / 105 mm at 46° Cutting width (rip fence): 1,030 mm Saw blade max. Ø: 450 mm Saw blade retractable under table: Ø 400 mm Table size, cast iron top: 1,200 x 655 mm Table extension: plus 750 x 655 mm Table widening: 1,200 x 655 mm Table height: 900 mm +/- 20 mm Main saw blade speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Nodpfx Ajgz Hx Djgxela Net weight: approx. 1,051 kg TECHNICAL DESCRIPTION Solid German engineering Suitable for edging, cross-cutting, panel cutting, mitre cuts, etc. Dimensionally stable, self-supporting machine body constructed as a robust welded steel frame from thick-walled steel profiles and laser-machined, mechanically finished steel sheet parts Mounted on the machine body is a torsion-resistant, precision-planed cast iron table top The robust, high-performance saw unit, integrated in the machine base, guarantees precise cutting results The complete saw spindle unit is dynamically balanced. Double-guided swivelling segments made of grey cast iron with dual column guidance for height adjustment, and a long, double ball-bearing mounted circular saw spindle provide absolute smooth running The double ball-bearing carriage is smooth-running and maintenance-free. Accurate, play-free operation over the full length, guided by hardened, precision-ground round steel rails with remote locking at 50 mm graduations Stable yet lightweight crosscut carriage made from steel profiles with a carrying roller at the outer narrow side. The crosscut fence can be extended on the long side up to 250 mm The length stop on the crosscut carriage with mm-scale and telescopic extension extendable up to 3,500 mm; with 2 sturdy, play-free adjustable stop flaps and 1 end stop with support for long strips; length stop can be used as an angle/mitre stop on both sides, continuously adjustable from 0° to 46° with mechanical length compensation. All common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set via a locking system Rip fence with cutting width of 1,030 mm right of the saw blade, including fine adjustment, easy manual adjustment and locking, measurement readout on an easily legible mm scale on an adjustable rule carrier Table widening 1,200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, bevel adjustment and spindle speed Electromotive height and tilt adjustment via push button Saw blade swivel range: 0° – 46° APA quick-release saw blade system Main saw blade speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Protective device swivels to both sides; guard with interchangeable wide/narrow inserts for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm retractable under table Extraction ports: Ø 120 mm on machine body, Ø 80 mm on blade guard Carriage, length and width fence profiles anodised CE compliant GS tested

Stanje: generalkompletno obnovljen (rabljeno), - Vzdolžno/prečno z ročnim in avtomatskim prestavljanjem - Sprejem evro palete v vzdolžni in prečni smeri - Nosilnost 1300 kg Nlodpfx Asiyyvhogxoa - Osnovne mere: 1430 mm širok, 1670 mm dolg, 1854 mm visok - Izvedba: premičen - Dvig: min. višina 80 mm, maks. višina 1030 mm, hod dviga 950 mm - Barva: svetlo siva RAL 7035 v celoti - Priključek: 440 V - 50 Hz, 1,5 ali 2,2 kW - Lastna masa: 490 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.950 mm, gradbena višina: 300 mm, dvižna višina: 1.650 mm, nosilnost: 1.500 kg, skupna masa: 450 kg, skupna dolžina: 2.500 mm, skupna širina: 800 mm, širina mize: 800 mm, višina mize: 1.950 mm, dolžina mize: 2.500 mm, transportna dolžina: 2.500 mm, transportna širina: 1.200 mm, širina platforme: 1.200 mm, dolžina platforme: 2.500 mm, zahteva za prostor dolžina: 2.500 mm, potrebna višina: 1.950 mm, potrebna širina: 1.200 mm, moč: 1,1 kW (1,50 KM), Oprema: dokumentacija / priročnik, Technical description with the following main data: Load capacity: 1,500 kg static distributed load Useful lift: 1,650 mm Closed height: 300 mm Overall height: 1,950 mm Platform length: 2,500 mm Platform width: 1,200 mm Material: Smooth sheet metal Nlsdpfx Agouhphvjxja Lifting time: approx. 35 sec. for full stroke Lowering time: load-dependent Power connection: 3 x 400 V/50 Hz + protective earth, incl. 16 A CEE plug and 3 m cable Motor: 1.1 kW, 1,400 rpm Solenoid voltage: 24 V DC Degree of protection: IP 54 overall, solenoid valve and switch IP 65 Paint finish: Dust grey RAL 7037 Power unit placement: integrated into the lift table Control box: dead man's control incl. 2 m cable Total weight: approx. 450 kg

Stanje: novo, Leto izdelave: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on beech workbench top - Lifting operation (up/down) via hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Useful lift: 610 mm - Maximum height: 1150 mm - Sturdy platform upper frame (970 x 590 mm) beneath the workbench top - Heavy-duty scissor lift construction with finger protection - Total weight: approx. 160 kg - 2 swivel castors with brake, 2 swivel castors without brake - Wheel diameter: 125 mm - On each narrow side, 2 adjustable support feet with swivel foot plate and rubberised contact area. Thus, the lift table can be used as a stationary or mobile workstation. - Powder-coated base frame and platform frame in light grey RAL 7035, scissors in violet blue RAL 5000 * Incl. widened foot pedal, enabling operation even when the table is fully lowered with the assembled workbench top. Product data – Workbench: Workbench made from solid beech (50mm thick), load capacity 200kg on the planing bench Front vice approx. 520 x 70 mm Front and rear vices fitted with spindles, ensuring precise and stable clamping jaw guidance Rear vice and workbench top feature holes for bench dogs Front edge of the workbench top: 130mm high Nlodpfx Agsrr Twmjxoa Bench drawer at the rear, running the full length of the workbench, for tool storage; includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of workbench top: 130 mm high Workbench top weight: approx. 90 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Predmet ponudbe je kompaktni stroj za deljenje in oblikovanje žemljic Mini Rex Futura, ki se odlikuje po visoki zmogljivosti in širokem razponu teže ob ohranjanju visoke kakovosti obdelave testa. OPIS NAPRAVE Nljdpsy Angqofx Agxea Delilno-zaokroževalni stroj za žemljice Mini Rex Futura, letnik 2011. Ročni vnos testa v lijak Dvoradno delovanje Ročni prevzem izdelkov s transportnega traku Zmogljivost: 33 ciklov/min ; 3960 kos/h Tehtni razpon: L: 25g – 75g ; H: 70g – 140g Krmilna plošča Testo: pšenično, graham, kvašeno, krofi Enoosebno upravljanje Dimenzije stroja (v x d x š): 1800 x 1770 x 650 mm Razpoložljivost: Predviden zaključek obnove: konec maja letos. Prikazna fotografija podobnega stroja po generalni obnovi v Cream Servisu. Pišite nam za ponudbo in več informacij.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, The subject of this offer is a used G2000 bun production line with a Mini Rex Futura divider-rounder from 2009. Designed for the production of buns: • round, stamped • elongated, unstamped • cut • rolled • Kaisersemmel • hot dog • Poznań style Product description: • Fully automatic and compact bun production line Nljdpfsy And Nex Agxoa • Based on the rotary Mini Rex Futura divider-rounder from 2009 • 2-row operation • Manual product removal from the discharge conveyor • Stamping station with easily interchangeable tools; set includes heads for: Kaiser roll, Corinthian • Integrated elongating and flattening unit • Weight range: - for stamped buns: 25g to 75g dough piece weight – capacity: 1,800 pcs/h to 2,640 pcs/h - for unstamped buns: 80g to 125g dough piece weight – capacity: 1,800 pcs/h to 3,960 pcs/h • Proofing time: approx. 6 min at 2,000 pcs/h output • Dough types: wheat, graham, yeast, donuts • One-person operation The machine is currently undergoing a complete overhaul, which should be completed by mid-June 2026. Photos show a similar bun production line after a complete overhaul at Cream Serwis. If you are interested in the price or would like to receive more photos, please contact us.

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Universal Testing Machine PM5 Force: 5 kN Crosshead Stroke: 520 mm Test Chamber Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1-500 mm / min Return Speed: 700 mm / min Load Cell: 5 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for „quick testing“ without the need for a PC. For tests requiring data storage and curve recording, our basic software provides options for control and evaluation. This allows for generating various test procedures and creating a test report. In addition, you can further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Nsdpfx Ajydanhogxela Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2025, stanje: novo, Universal Testing Machine PM50 Force: 50 kN Crosshead Travel: 1200 mm Test Space: 400 mm Overall Height: 1817 mm Weight: approx. 380 kg Travel Resolution: 0.01 mm Testing Speed: 0.03–1000 mm/min Nledpfx Ajydazujgxsa Return Speed: 1000 mm/min Load Cell: 50 kN Includes evaluation electronics and base software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without a PC. For tests requiring data storage and recording of the curve progression, our base software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Gripping fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.