Heidelberg Gt 32×46 Hot Stamping Machine nakup rabljenega (73.537)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Equipment: 1 gripper feeder, right side 3 pressing modules at 180 kN each = total 540 kN 4 standard slide units 1 narrow slide unit Working range: Wire diameter range: up to 10 mm Strip width: up to 100 mm Bdsdpfx Aoma S Nregtob Feed length: up to 250 mm Capacity: up to 135 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Equipment: 1 right-hand gripper feed 1 two-point eccentric press 250 kN 5 slide units Working range: Wire diameter range: 1.5 - 5.0 mm Strip width: max. 50 mm Feed length: max. 200 mm Bdodpfxovuzvds Agtob Performance: max. 450 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Oprema: Bdjdofzr Aqepfx Agtob 1 kos BIHLER zvočno izolirana kabina 1 kos vpenjalni dovod desno 1 kos ekscentrična stiskalnica 70 kN 4 kosi standardnih drsnih agregatov 1 kos ozki drsni agregat Delovno območje: Debelina žice: 0,5 - 3,5 mm Širina traku: do 32 mm Dolžina dovoda: do 170 mm Kapaciteta: do 250/min.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units Boden E N Ndopfx Agtedb - 1 narrow slide unit - 1 control shaft Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Equipment: 1 right-hand gripper feed 1 eccentric press, 70 kN 3 narrow slide units 1 control shaft Working range: Wire diameter range: 0.5 – 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Bsdpfx Ajtmtzkogtodb Performance: up to 400 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, *Machine was overhauled by BIHLER in 1997* Equipment: - 1 piece right-side gripper feed - 1 piece left-side gripper feed - 1 piece 70 kN eccentric press - 1 piece cam press - 3 pieces standard slide units - 2 pieces narrow slide units - 1 piece camshaft Working range: Bdsdpfx Agorpk Axotob - Wire diameter range: 0.5 – 3.5 mm - Strip width: up to 32 mm - Feed length: up to 170 mm - Output: up to 250 cycles/min.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1967, Equipment: 1 Gripper feed unit, right 1 Eccentric press, 90 kN 2 Narrow slide assemblies Bjdpjpq H Upofx Agtodb 3 Standard slide assemblies Working range: Wire diameter range: 0.5 – 3.5 mm Strip width: up to 32 mm Feed length: up to 170 mm Capacity: up to 250 cycles/min.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Equipment: 1 right-side gripper feed 1 eccentric press 70 kN 3 narrow slide units 1 control shaft Working area: Wire thickness range: 0.5 - 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Bodpfxetmty Ne Agtodb Capacity: max. 400 cycles/min

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Bdodpetqf Iqjfx Agtsb Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, Equipment: 1 piece BIHLER control unit P-CNC 200 1 piece BIHLER soundproof enclosure 2 pieces right-hand gripper feed 1 piece left-hand gripper feed 4 pieces wide-slide assemblies (welding press slides) 1 piece BIHLER B 1000 welding unit Working range: Wire diameter range: 0.5 - 3.0 mm Strip width: max. 40 mm Feed length: max. 240 mm Output: up to 400 cycles/min Bdodpfx Aowxarqegtjb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Wire diameter: 0.1 - 1.3 mm Bdjdpo Syv Tsfx Agteb Cutting length: 5 - 70 mm Capacity: up to 400 cycles/min Complete with cooling unit and motorized wire spool

Leto izdelave: 2010, obratovalne ure: 50 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: OMMA HGS 314, VALJČNI NANAŠALEC ZA POLIURETANSKA VROČA LEPILA. UPORABNA DELOVNA ŠIRINA: 1300 MM. DELOVNA DEBELINA OD 3 MM DO 80 MM. DELOVNA HITROST OD 5 DO 25 M/MIN. DELOVNA TEMPERATURA DO 140°C. PREMER LEPILNEGA NANAŠALNEGA VALJA: 250 MM. VGRANJENA MOČ: 15 KWATT. NAPAJANJE: V.400/50/3+N. Bdedpjxfb N Ijfx Agtjb

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dve enaki stroji, vključno z dokumentacijo. Bdedpjm Rg R Asfx Agtjb

Stanje: dober (rabljeno), Leto izdelave: 2008, Stroj za vroči lepilni lepilni stroj Nordson ProBlue 4, naprava za taljenje lepila, 4 litre vročega lepilnega lepila – rabljeno - : Cena iz skladišča: samo 2.950,- € (neto)! Dodatne naprave v prihodu! Bdodpfow Rcgyjx Agtsb Proizvajalec: Nordson Tip: ProBlue 4 Leto izdelave: 2008 102223OA AC 200–240V, 50/60Hz, 26A, 1/3 Dimenzije: - Dolžina: 540,0 mm - Širina: 340,0 mm - Višina: 480,0 mm Teža: 50,0 kg Stanje: dobro Na voljo: takoj Lokacija: skladišče Frankenberg / Saška

Stanje: dober (rabljeno), Leto izdelave: 2018, 2 stroji za vroče lepilne taline Meler, talilna naprava za lepilo, 5 litrov vročega lepilnega lepila – rabljeno - : Cena na kos iz lokacije: samo 2.950 € (neto)! Proizvajalec: Meler Tip: Micron 5 Leto izdelave: 2018 Ref.: 101002240 Micron 5/4 N Serijska številka: npr.: 1J800918 Število izhodov: 4 PROSTORNINA REZERVOARJA: 5,15 litra MAKSIMALNI DOVOLJENI VOLUMEN BLOKA DIMENZIJA A: 192 mm DIMENZIJA B: 182 mm DIMENZIJA C: 106 mm MAKSIMALNA MOČ TALJENJA: 9 kg/h (*) IZHODNA MOČ ČRPALKE 29,3 kg/h črpalka 7 cc (*) 66,0 kg/h črpalka 19 cc (*) ŠTEVILO IZHODOV: 4 TEMPERATURNI OBSEG: 0 do 200°C (104 do 392°F) opcija: 40 do 230°C (104 do 446°F) NADZOR TEMPERATURE: RTD ± 0,5°C (± 1°F) MAKSIMALNI OBRATOVALNI TLAK (PRI 6 BAR): 81,6 bar (1.183 psi) MERE (D x Š x V): 587 x 341 x 481 587 x 341 x 628 (z odprtim pokrovom) TEŽA: 37,5 kg (brez polnjenja) 1-N/PE 230V, 50/60 Hz, 7,1 kW 3-N/PE 400/230V, 2,4 kW, Stanje: dobro Bsdpfxew S E Naj Agtedb Na voljo: takoj Lokacija: skladišče Frankenberg / Saška

Stanje: novo, Leto izdelave: 2025, Clamping force: 240 kN Clamping plate: 380x380 mm Distance between columns: 250x250 mm Machine weight: approx. 3.0 t Clamping stroke: 180 mm Ejector force: 28 kN Ejector stroke: 50 mm Mould height: 120–300 mm Column diameter: 45 mm Casting force: 43 kN Casting stroke: 85 mm Casting piston diameter: 36, 40, 45 mm Casting volume (DIN 24480): 47, 63, 87 cm³ Specific injection pressure: 420, 340, 270 daN/cm² Corresponding parting plane: 56, 70, 88 cm² Eject stroke: 150 mm Machine Equipment 1.0.2 Clamping unit cover on the base frame for scale/chute 1.0.3 Small parts cover in the base frame 1.1.0 Motorised safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Internal machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment for clamping unit 3.0.1.2 Casting assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified casting piston removal 3.4.6 Casting piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 3.5.3 Plug-in connectors for electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance benefits package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction unit DISPO10 Bjdpfxox Hp E Ae Agtodb 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.3.1.1 Control unit with visualisation on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.1 Spray bar CR 155

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: Bsdpeiu Smbsfx Agtodb 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Bdedpfxjvxlufo Agteb Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Tie bar distance: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mold height: 120-350 mm Tie bar diameter: 56 mm Die casting force: 55 kN Bsdpfxotuxmyo Agtsdb Die casting stroke: 130 mm Plunger diameter: 45, 50, 55 mm Casting volume (DIN 24480): 76, 121, 165 cm² Specific casting pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Recoil stroke: 150 mm Used machine DAW 50 as the basis for a general overhaul, excluding control cabinet, melting furnace and furnace cabinet. A full overhaul can be optionally performed at the manufacturer’s refurbishment facility. The scope of this overhaul can be defined upon request.

Stanje: novo, Leto izdelave: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160–400 mm Tie bar diameter: 65 mm Injection force: 78 kN Bjdpjr Hwf Aofx Agtsdb Injection stroke: 130 mm Injection piston diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 bar Corresponding parting plane: 226, 274, 326 cm² Ejection stroke: 220 mm Machine Features: 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side (left) 1.4.0 Machine mounts 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill injection system 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop in return stroke 3.5.2 Electric nozzle and shot chamber heating 3.5.3 Plug-in connectors for electric nozzle and shot chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 DATADIALOG–RC machine control 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on swing arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.3 Spray rail CR 275

Stanje: rabljeno, Leto izdelave: 1993, Sheet width 1550 mm Bjdevh Ndpjpfx Agtedb Sheet length 2525 mm Sheet thickness 6.4 mm Punching force 200 kN Positioning speed X 50 m/min Positioning speed Y 50 m/min Stroke rate 200 / 400 strokes/min Control MNC 32000 Tool changer 22 positions Total power requirement 7.5 kW

Stanje: rabljeno, Leto izdelave: 1997, Sheet width: 1015 mm Sheet length: 1015 mm Sheet thickness: 6.0 mm Punching force: 25 t Bdedpfouiz Iwox Agteb Punch diameter: 88.9 mm Total power requirement: 16 kW Machine weight: approx. 12,000 kg Space requirement: approx. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 stations - FANUC Series O-P control - Foot pedal - Operating manual (English)

Leto izdelave: 1984, stanje: rabljeno, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective - Pneumatic-hydraulic press - Stroke: 50 mm - Clear distance between columns: 850 mm - Table size: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg Bedpfed Hp Tzjx Agtjdb

Leto izdelave: 2006, stanje: rabljeno, Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutter, pneumatic die cutter - Manufacturer: Stommel & Voos, embossing press / rail stamping machine on solid base frame - Model: SV700/6/PE/EF Bdedpfx Askyy Ufjgteb - Strip width: 13 mm, convertible - Individual components: see photos - Accessories: no additional accessories - Dimensions: 820/520/H1680 mm - Weight: approx. 154 kg

Stanje: dober (rabljeno), Elektromotor, trifazni motor - Moč: 32/46 kW - Število obratov: 730/1470 min⁻¹ - Gred: Ø 55 mm - Izvedba: B3 - Zaščitni razred: IP55 - Količina: 1x motor na voljo Bedpfx Agstr R Ahjtjdb - Dimenzije: 970/630/H520 mm - Teža: 465 kg