Stroj za tlačno litje z vročo komoro - Vertikalni

FRECH DAW 50

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Fedpfx Afsfrvzvelsft Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Ffodpegpxc Ssfx Aflet Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Ffjdeucfwpjpfx Aflot

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 360 mm, največja višina reza: 100 mm, Obseg rezanja okroglega jekla pri 90°: 100 mm, dolžina odseka (min.): 300 mm, Fully automatic carbide straight-cut circular saw machine Type KMR 100 AP Completely overhauled to as-new condition – available from stock WORKING RANGE Round material: 20 – 100 mm Square material: 20 – 80 mm DRIVE POWER Saw motor, frequency controlled: 11.0 kW CUTTING SPEEDS 20 – 150 m/min Includes feed magazine for 6 m bars and sorting unit for crop/end pieces and good parts Suitable for cut-off lengths up to 300 mm Cutting time for Ø 100 mm solid material (1.0037): approx. 7 seconds! Your advantage: Fodoh Uqpvepfx Aflsft – Machine directly overhauled by the manufacturer incl. 6 months parts warranty – All machines are completely disassembled and overhauled – Only original KALTENBACH spare parts are used

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package Fedpfx Afjiu Smboloft 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 36585, dolžina podajanja os X: 800 mm, dolžina pomika po osi Y: 800 mm, dolžina podajanja os Z: 600 mm, obremenitev mize: 1.000 kg, skupna masa: 15.500 kg, vhodni tok: 55 A, vhodna frekvenca: 50 Hz, 2007 Alzmetall CNC rezkalni stroj (z robotom Kuka) Fjdpfx Afowpu D Ajleft Stroj je razstavljen in pripravljen za nakladanje. Krmilna kartica je odstranjena!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2018, Specifikacije Znamka: Fanuc Model: M-20iA Tip: Robotska roka Število osi: 6 Ffodpfx Aswdq Ugeflot Nosilnost: 20 kg Doseg: 1811 mm Ponovljivost: 0,08 mm Teža: 250 kg Fanuc M-20iA je 6-osna robotska roka z nosilnostjo 20 kg in dosegom 1811 mm.

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Corresponding parting surface: 656, 846, 1078 cm² Fedpfx Aovxlufjfloft Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.

Stanje: rabljeno, Leto izdelave: 2001, Technical details: Max. grinding diameter: 3–220 mm Ffsdpettxg Iefx Aflet Regulating wheel width: 400 mm Max. grinding wheel width: 400 mm Grinding wheel drive: 55 kW Peripheral speed: max. 45 m/sec Regulating wheel dimensions: 350 x 400 x 203 mm Grinding wheel dimensions (CBN): 500 x 400 x 304 mm Grinding wheel dimensions (Corundum): 600 x 400 x 304 mm Total power requirement: 75 kVA Machine weight approx.: 13 t Required floor space approx.: 4.47 x 2.77 x 2.49 m

Stanje: rabljeno, Leto izdelave: 1980, Pressure: 250 t Distance between uprights: 2000 mm Stroke: 600 mm Distance table/ram, stroke top: 1000 mm Table area: 1700 x 1300 mm Table height above floor: 800 mm Cushion pressure in table: 100 t Cushion stroke in table: 180 mm Cushion area in table: 1650 x 700 mm Side opening between uprights: 1000 mm Ram area: 1700 x 1400 mm Ffodsvut Tnopfx Aflst Weight: 31.1 t Required space (WxDxH): 3.3 x 1.9 x 4.85 m Height above floor: 4.55 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in the table, hydraulic stroke damping No foundation pit required Can be offered without commissioning, with commissioning in the given condition, or alternatively with a new Siemens S7-1500 F control system